Commit graph

15785 commits

Author SHA1 Message Date
Tom Rini
a209c3e6b4 For 2023.04
-----------
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15028
 
 - Boards:
 	- UDoo
 	- MX53 Menlo
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCY90hNQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76bHAwCfSmjacuzcLNO7S+w6MUgF3thHFHoAoJMk18KY
 jVKuwOJjLIv60IacIb6p
 =fFpi
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20230203' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

For 2023.04
-----------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15028

- Boards:
	- UDoo
	- MX53 Menlo
2023-02-03 10:30:45 -05:00
Peter Robinson
01f372d8d6 udoo_neo: Select DM_SERIAL and drop iomux board level init
Convert to DM_SERIAL and drop the iomux board file
level init as it's handled as part of the DM serial
layer instead.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-03 13:10:01 +01:00
Peter Robinson
99a94c368c udoo_neo: Move to DM for REGULATOR/PMIC/I2C drivers
This moves over the PMIC power init to DM and the associated i2c and
regulator bits.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-03 13:10:01 +01:00
Tim Harvey
c3d9736d54 board: gw_ventana: enable MV88E61XX DSA support
Add MV88E61XX DSA support:
 - update dt to provide internal MDIO bus and port handles.
   U-Boot requires a more restrictive subset of the dt bindings
   required by Linux for the sake of simplifying code
 - update defconfig to remove old driver and enable new one
 - replace mv88e61xx_hw_reset weak override with board_phy_config support
   for register configuration that is outside the scope of the DSA driver

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2023-02-02 14:44:53 -05:00
Tom Rini
57e1634836 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2023-02-02 09:25:59 -05:00
Tom Rini
1e1cd8eb2d Merge tag 'fsl-qoriq-2023-2-1' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
make QSPI clock selection optional during SoC init for ls102xa
Fix regulator name for ls2_sfp
Update NXP RCW github repo
2023-02-01 09:31:17 -05:00
Rick Chen
c5740bc1b2 riscv: ae350: support OpenSBI 1.0+ which enable FW_PIC
Original OpenSBI (without FW_PIC) will relocate itself
from 0x1000000 to 0x0. After OpenSBI added FW_PIC codes,
it will not relocate any more and always run at 0x1000000.
Hence, it may overlap with Kernel memory region. So it is
necessary to change OpenSBI address from 0x1000000 to 0x0.

More details can refer to commit cb052d7712
("riscv: qemu: spl: Fix booting Linux kernel with OpenSBI 1.0+")

Signed-off-by: Rick Chen <rick@andestech.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
2023-02-01 16:17:53 +08:00
Fabio Estevam
a25dad7459 ls1021atsn: Suggest the NXP RCW github repo
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/qoriq/qoriq-components/rcw:

"QUIC repositories on this site will not receive any updates after
March 31, 2022, and will be deleted on March 31, 2023."

Point to the NXP RCW github repo instead.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-02-01 14:13:28 +08:00
Michael Trimarchi
6dac63adca engicam: imx6: migrate to DM_SERIAL
Add the needed DT overrides and configs to enable UART in SPL.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-31 19:44:23 +01:00
Tim Harvey
3041e094e4 board: gateworks: venice: poll I2C lines to wait for GSC firmware
In some situations the GSC firmware where the EEPROM containing the
model and DRAM configuration may not be ready by the time the SoC
is ready to talk to it over I2C.

Instead of a hard delay, poll the I2C lines to wait until they are
released to avoid the I2C drivers 'Arbitation lost' error message.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-31 18:08:23 +01:00
Fabio Estevam
f0f461287e imx: Suggest the NXP ATF github repo
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:

"QUIC repositories on this site will not receive any updates after
March 31, 2022, and will be deleted on March 31, 2023."

Point to the NXP ATF github repo instead.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2023-01-31 16:02:05 +01:00
Andrejs Cainikovs
0cf91115ed board: apalis-imx8: add 2nd ethernet address
All Apalis iMX8 variants have 2nd RGMII on SoC, so add the address
for 2nd ethernet.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2023-01-31 15:46:40 +01:00
Peng Fan
1224dd8b15 imx: mx6sxsabreauto: select DM_SERIAL
Select DM_SERIAL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:34 +01:00
Peng Fan
2108db6c92 imx: mx6sllevk: select DM_SERIAL
Select DM_SERIAL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:34 +01:00
Peng Fan
59bae6f58d imx: mx6sllevk: correct pmic name
The prefix 0 has been dropped in dts, so correct in board file

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:34 +01:00
Peng Fan
3a6d7ef389 imx: mx6ull/z_14x14_evk: clean up UART iomux
After DM_SERIAL, and set pinctrl_uart1 as pre-reloc, no need initialize
iomux at board file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:33 +01:00
Fabio Estevam
ab79811c9f pico-imx7d: Convert to DM_I2C and DM_PMIC
The conversion to DM_I2C is mandatory, so convert to it
and also to DM_PMIC.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-01-31 08:36:52 +01:00
Fabio Estevam
068027b1a0 pico-imx7d: Add support for the 2GB variant
Add the board detection mechanism to be able to support
the 2GB variant.

Based on the code from TechNexion U-Boot downstream tree.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Fabio Estevam
d12618b927 imx8mm-phg: Add board support
Add the board support for the i.MX8MM Cloos PHG board.

This board uses a imx8mm-tqma8mqml SoM from TQ-Group.

imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken
directly from Linux 6.2-rc3.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-30 23:23:02 +01:00
Marek Vasut
5cae28c3b1 ARM: imx: Factor common code out of Data Modul i.MX8M Mini eDM SBC
Pull common.c into common subdirectory of the board file,
since this code can be reused by other Data Modul SBCs.
Drop the include of lpddr4_timing.h, which is unneeded.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-30 23:23:02 +01:00
Marek Vasut
3bb15941ff ARM: imx: Drop board side icache enable on Data Modul i.MX8M Mini eDM SBC
The icache is enabled in common architecture code since commit:
2fa763baa1 ("ARM: imx: Enable instruction cache early on on i.MX8M")
Drop the board side duplicate code.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-30 23:23:01 +01:00
Marek Vasut
a20be24cd4 ARM: imx: Remove PMIC reset configuration from board files
The PCA9450 reset configuration can now be performed by the PCA9450 PMIC
driver itself, remove the hard-coded variant from board code and let the
PMIC driver perform this task using one-liner:

```
$ sed -i '/set WDOG_B_CFG to cold reset/,+2 d' $(git grep -l PCA9450_RESET_CTRL.*0xA1 board/)
```

Venice and i.MX93 EVK required slight manual fix up.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-01-30 23:23:01 +01:00
Andrejs Cainikovs
382e89ca40 board: apalis-imx8: initialize snvs
Initialize Secure Non-Volatile Storage, aka SNVS.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 21:02:27 +01:00
Andrejs Cainikovs
9607d8b17d board: apalis-imx8: remove board_phy_config duplicate
Remove a duplicate of weak board_phy_config() implementation
in drivers/net/phy/phy.c.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 21:02:27 +01:00
Philippe Schenker
63b6193f3f board: apalis-imx8: get rid of sc_err_t type
sc_pm_setup_uart() returns int, not sc_err_t.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 21:02:27 +01:00
Marcel Ziswiler
37630e0f86 apalis-imx8: display build info
Display build info with information about the version of SCFW, SECO and
TF-A (ATF).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 20:59:09 +01:00
Marcel Ziswiler
717783ecdc apalis-imx8: turn off lcd backlight before os handover
U-Boot typically tears down the display controller before handing
control over to Linux. On LCD displays disabling pixel clock leads to a
fading out effect with vertical/horizontal lines. Make sure to disable
back light GPIO Apalis BKL1 before booting Linux.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 20:59:09 +01:00
Marcel Ziswiler
fe7b2b322e apalis-imx8: implement pcb version and soc variant handling
Implement PCB version and SoC variant handling which automatically loads
the correct device tree for the Linux kernel.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 20:59:09 +01:00
Sinthu Raja
554f8e84b6 board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM
Add the board_init_f API for SPL and run the platform-required SoC
initialization.

Add the functionality for board name-based DTB selection from FIT
within SPL. This will make it easier to utilise one defconfig for
both the EVM and the SK.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-27 12:51:27 -05:00
Sinthu Raja
1aaf9df197 board: ti: j721s2: Add support for detecting multiple device trees
Update the board_fit_config_name_match() to choose the right dtb
based on the board name read from EEPROM.

Also restrict multpile EEPROM reads by verifying if EEPROM is already
read

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-27 12:51:26 -05:00
Sinthu Raja
ad45a17578 board: ti: j721s2: Enable support for reading EEPROM at next alternate address
J721S2 EVM has EEPROM populated at 0x50. AM68 SK has EEPROM populated at
next address 0x51 in order to be compatible with RPi. So start looking
for TI specific EEPROM at 0x50, if not found look for EEPROM at 0x51.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-27 12:51:26 -05:00
Sinthu Raja
24bbe09a91 board: ti: j721s2: Add support to update board_name for am68-sk
Update setup_board_eeprom_env() to choose the right board name
for am68-sk.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-27 12:51:26 -05:00
Tom Rini
9ddbd70ff9 Xilinx chnages for v2023.04-rc1
makefile:
 - Add multi_dtb_fit dependency
 
 clk:
 - Handle error cases
 
 microblaze:
 - Disable falcon mode and cleanup code around
 
 xilinx:
 - Enable regular expression matching in board_fit_config_name_match()
 - Fix FRU handling for 0xC1 format
 - Fix Xilinx legacy format eeprom parsing
 
 zynqmp:
 - Some DT updates/cleanups
 - Fix IDcode for xck24
 - Remove empty mini config files
 - Add support for k24
 
 versal:
 - Remove empty mini config files
 
 versal_net:
 - Setup timer when runs in EL3
 - Build u-boot.elf for mini configurations
 
 zynq-gem:
 - Add support for new compatible strings
 - Remove support for Avnet Ultrazedev SOM
 - Handle SGMII with PCS phy
 
 spi:
 - Add support for gigadevice parts
 
 misc:
 - Remove CONFIG_TARGET_VENUS ifdef
 - Add missing headers to remove sparse warnings
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY9PmzwAKCRDKSWXLKUoM
 IYWxAJwNgiXtFT17pBy+1M0JvSWgyvWF3QCfTQG2Krnw0+d65PF5A7UFTDL7SZM=
 =cMrc
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx chnages for v2023.04-rc1

makefile:
- Add multi_dtb_fit dependency

clk:
- Handle error cases

microblaze:
- Disable falcon mode and cleanup code around

xilinx:
- Enable regular expression matching in board_fit_config_name_match()
- Fix FRU handling for 0xC1 format
- Fix Xilinx legacy format eeprom parsing

zynqmp:
- Some DT updates/cleanups
- Fix IDcode for xck24
- Remove empty mini config files
- Add support for k24

versal:
- Remove empty mini config files

versal_net:
- Setup timer when runs in EL3
- Build u-boot.elf for mini configurations

zynq-gem:
- Add support for new compatible strings
- Remove support for Avnet Ultrazedev SOM
- Handle SGMII with PCS phy

spi:
- Add support for gigadevice parts

misc:
- Remove CONFIG_TARGET_VENUS ifdef
- Add missing headers to remove sparse warnings
2023-01-27 10:15:39 -05:00
Algapally Santosh Sagar
f0f86d39fe fru: ops: Display FRU fields properly for 0xc1 fields
FRU data is not displayed properly in case of 0xc1 fields.
The 0xC1 can be used in two cases.
1. Char record type 8-bit ASCII + Latin 1 with length of 1.
(For example board revision 'A')

2. C1h (type/length byte encoded to indicate no more info fields).
which can follow by 00h to fill all remaining unused space

Hence removed the check end-of-the field c1 to allow c1 fields.

"ASCII+LATIN1" is defined as the printable characters from the
first set of 256 characters of Unicode 6.2 (U+0000h through U+00FFh,
inclusive) expressed as an eight-bit value. (Unicode follows ISO/IEC
8859-1 in the layout of printable characters up to U+00FFh).

So, print only printable chars and limit range from 0x20 ' ' to 0x7e '-'
which will be also indication if 0xc1 behaves as record with one char or
end of record.

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4198d73de600627872c80a5b07e5068502c589d7.1674648379.git.michal.simek@amd.com
2023-01-27 08:49:24 +01:00
Michal Simek
5563167e6e xilinx: board: Update logic in xilinx_read_eeprom_legacy
When eeprom has random content printing random chars can stuck U-Boot.
That's why update legacy eeprom format decoding algorithm to copy only
maximum amount of chars allocated for fields.
And also print them directly from desc structure.

Previous algorithm was printing strings first directly from eeprom content
and then copy them to desc structure.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/42065fcbb1a10581f9f4f091d64b43c01fe595c6.1674573561.git.michal.simek@amd.com
2023-01-27 08:48:32 +01:00
Michal Simek
e6c62537db xilinx: board: Fix xilinx_eeprom_legacy_cleanup()
When ethernet mac address contains 0x20 or 0xff MAC address is changed and
bytes are converted to zeros. That's why fix decoding algorithm to ignore
fields where MAC address is stored and all non printable chars (including
space) are zeroed.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2802cf1086b14c181356810006fe886f950a36f3.1674573561.git.michal.simek@amd.com
2023-01-27 08:48:32 +01:00
Michal Simek
b86b135fc6 xilinx: board: Use ETH_ALEN macro for mac address size
Use predefined macro for eth_mac legacy format.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/382d4bff370894164fad3c30ac0400b25142b544.1674573561.git.michal.simek@amd.com
2023-01-27 08:48:32 +01:00
Algapally Santosh Sagar
1d15612b99 xilinx: versal: Add missing header
Add missing prototype to fix the sparse warning, warning: no
previous prototype for 'do_go_exec' [-Wmissing-prototypes].

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-4-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-27 08:42:47 +01:00
Algapally Santosh Sagar
fb737f1ed8 xilinx: common: Include header file to fix warning
Prototype is missing for board_get_usable_ram_top, which is pointed by
below sparse warning. Include init.h header file to fix this.

warning: no previous prototype for 'board_get_usable_ram_top'
[-Wmissing-prototypes].

Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Link: https://lore.kernel.org/r/20230120053617.32463-2-ashok.reddy.soma@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-01-27 08:42:47 +01:00
Michal Simek
2fe2be2d27 arm64: zynqmp: Add support for Kria K24 SOM
SOM itself from PS point of view is using the same configuration as K26
that's why reuse that files and only change compatible strings.

The reason for creating own set of files is just in case when versions
start to diverge because of HW change, supply chain issue, etc.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/61f877ec0b480c5bd368a1211fc73ff7465016bd.1674043915.git.michal.simek@amd.com
2023-01-24 13:59:33 +01:00
Tom Rini
6e7df1d151 global: Finish CONFIG -> CFG migration
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00
Tom Rini
a3fda0d30a global: Remove unused CONFIG defines
Remove some CONFIG symbols and related comments, etc, that are unused
within the code itself at this point.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
448e2b6327 event: Correct dependencies on the EVENT framework
The event framework is just that, a framework. Enabling it by itself
does nothing, so we shouldn't ask the user about it. Reword (and correct
typos) around this the option and help text. This also applies to
DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be
visible to the user to select, when EVENT is selected.

With this, it's time to address the larger problems. When functionality
uses events, typically via EVENT_SPY, the appropriate framework then
must be select'd and NOT imply'd. As the functionality will cease to
work (and so, platforms will fail to boot) this is non-optional and
where select is appropriate. Audit the current users of EVENT_SPY to
have a more fine-grained approach to select'ing the framework where
used. Also ensure the current users of event_register and also select
EVENT_DYNAMIC.

Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reported-by: Oliver Graute <Oliver.Graute@kococonnector.com>
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 7fe32b3442 ("event: Convert arch_cpu_init_dm() to use events")
Fixes: 42fdcebf85 ("event: Convert misc_init_f() to use events")
Fixes: c5ef202557 ("dm: fix DM_EVENT dependencies")
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-18 12:46:13 -05:00
Michal Simek
8174cd2116 xilinx: common: Add support for partial string match in board_fit_config_name_match()
Board name in FIT image can use U-Boot regular expressions SLRE to instruct
U-Boot to handle all revisions for certain board.
For example when name (description property) is saying "zynqmp-zcu104-revA"
only description with this name is selected.
When zynqmp-zcu104.* is described then all board revisions will be handled
by this fragment.
Xilinx normally have some board revisions which are SW compatible to each
other. That's why make sense to define board name with revisions first
follow by generic description with '.*' at the end like this:

config_1 {
        description = "zynqmp-zcu104-rev[AB]";
        fdt = "zynqmp-zcu104-revA";
};
config_2 {
        description = "zynqmp-zcu104.*";
        fdt = "zynqmp-zcu104-revC";
};

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d67683a3c5d0435a5070e622f7a9a38e19c64cf5.1672994329.git.michal.simek@amd.com
2023-01-18 12:17:47 +01:00
Ashok Reddy Soma
724379d9af xilinx: versal-net: Add support for timer and start it
Add support for starting timer by setting up time stamp generator
registers. This is done only for EL3 i.e. mini U-Boot case.
For other cases, it will be done TF-A.

Add COUNTER_FREQUENCY and IOU_SWITCH_DIVISOR0 to Kconfig so that they
can be tuned as required.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/fcd8b0dc4b45a11f5e753afff42f84738ac813da.1673336645.git.michal.simek@amd.com
2023-01-16 15:34:37 +01:00
Quentin Schulz
c925be73a0 rockchip: add support for PX30 Ringneck SoM on Haikou Devkit
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip
PX30 in a micro Qseven-compatible form-factor.

PX30-µQ7 features:
        * CPU: quad-core Cortex-A35
        * DRAM: 2GB dual-channel
        * eMMC: onboard eMMC
        * SD/MMC
        * TI DP83825I 10/100Mbps PHY
        * USB:
                * USB2.0 dual role port
                * 3x USB2.0 host via onboard USB2.0 hub
        * Display: MIPI-DSI
        * Camera: MIPI-CSI
        * onboard 2.4GHz WiFi + Bluetooth module
        * Companion Controller: on-board additional microcontroller
	  (STM32 Cortex-M0 or ATtiny):
                * RTC
                * fan controller
                * CAN (only STM32)

The non-U-Boot DTS files are imported from Linux v6.2-rc2.

Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
2023-01-16 18:01:11 +08:00
Peter Robinson
5a42fd0258 rockchip: Add initial support for the PINE64 Pinephone Pro
The Pinephone Pro is another device by PINE64. It's closely related
to the Pinebook Pro of which this initial support is derived from.

Specification:
- A variant of the Rockchip RK3399
- A 6 inch 720*1440 DSI display
- Front and rear cameras
- Type-C interface with alt mode display (DP 1.2) and PD charging
- 4GB LPDDR4 RAM
- 128GB eMMC
- mSD card slot
- An AP6255 module for 802.11ac WiFi and Bluetooth 5
- Quectel EG25-G 4G/LTE modem

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:01:11 +08:00
Jagan Teki
b8f1ca9540 board: rockchip: Add Edgeble Neu2 IO Board
Neural Compute Module 2(Neu2) IO board is an industrial form factor
IO board from Edgeble AI.

General features:
- microSD slot
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion

Neu2 needs to mount on top of this IO board in order to create complete
Edgeble Neural Compute Module 2(Neu2) IO platform.

Add support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
2023-01-16 18:01:11 +08:00
Jagan Teki
26f92be07e ram: rockchip: Add common ddr type configs
We have common ddr types in rockchip or in general. So use
the common ddr type names instead of per Rockchip SoC to
avoid confusion.

The respective ddr type names will use on the associated
ddr SoC driver as these drivers are built per SoC at a time.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-01-16 18:01:10 +08:00
Patrick Delaunay
4b002d9628 board: st: Add support of STM32MP13x boards in stm32board cmd
Add board identifiers for STMicroelectronics STM32MP13x boards:
- DISCO board: MB1635

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-01-12 16:37:13 +01:00