Commit graph

57 commits

Author SHA1 Message Date
Stefan Roese
4ff942b059 mips: mt76xx: Enable watchdog support
This patch enables and starts the watchdog on the MT7620 platform.
Currently the WD timeout is configured to 60 seconds.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
[fixed build error due to missing function prototype arch_misc_init]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18 16:02:22 +01:00
Stefan Roese
b4a6a1bb3f mips: mt76xx: Kconfig: Add ethernet and GPIO support
Imply DM_ETH and DM_GPIO for ARCH_MT7620, as this platform now supports
ethernet and GPIO as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-18 16:02:22 +01:00
Daniel Schwierzeck
9630146411 MIPS: make size of relocation table fixed but configurable
Currently the size of the relocation table will be shrunk
to the actual size needed. Although this gives a maximal
space saving, it messes up the _end symbol. This breaks
features like appended DTBs because the _end symbol doesn't
point to the real end of the U-Boot binary.

Remove the size shrinking and make the size of the relocation
table fixed but configurable. This follows the Linux approach
and the user can adjust the size to his needs.

Also rename the relocation table section from .rel to .data.reloc
to follow the Linux approach and to avoid ambiguities with the
.rel.* sections added by the linker.

Reported-by: Lars Povlsen <lars.povlsen@microsemi.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-11-02 22:39:07 +01:00
Stefan Roese
41f6e6eb64 mips: mt76xx: Add sysreset support
This patch adds the necessary sysreset DT node and enables the required
drivers via Kconfig.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-23 14:27:51 +02:00
Stefan Roese
4c835a607b mips: Add basic MediaTek MT7620/88 support
This patch adds basic support for the MediaTek MT7620/88 SoCs. Parts of
the code is copied from the MediaTek GitHub repository:

https://github.com/MediaTek-Labs/linkit-smart-uboot.git

The mt7628a.dtsi file is imported from Linux v4.17.

Support for the LinkIt Smart 7688 module and the Gardena Smart Gateway
both based on the MT7688 will be added in further patches.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22 21:18:33 +02:00
Daniel Schwierzeck
5ef337a037 MIPS: cache: make index base address configurable
The index base address used for the cache initialisation is currently
hard-coded to CKSEG0. Make this value configurable if a MIPS system
needs to have a different address (e.g. in SRAM or ScratchPad RAM).

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22 21:02:03 +02:00
Daniel Schwierzeck
d1c3d8bdfa MIPS: start.S: make boot config at offset 0x10 configurable
Some MIPS systems store some board-specific boot configuration
in the U-Boot binary at offset 0x10. This is used by Malta boards
and by Lantiq/Intel SoC's when booting from parallel NOR flash.

Convert the hard-coded values to Kconfig options to remove such
board-specific stuff out of the generic start.S code. This also
deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-09-22 20:59:22 +02:00
Tom Rini
481ea2e39d mips: au1x00: Remove support for these SoCs
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform.  As pb1x00 had no listed
maintainer I am assuming that it is also orphaned.  Remove this platform
and then remove the unused SoC support.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08 13:34:27 +02:00
Tom Rini
215b4fae51 mips: dbau1x00: Remove this board
This platform has been marked as orphan since June of 2016 and should
have been removed some time ago.  Do so now.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08 13:33:51 +02:00
Michal Simek
08a00cba06 dm: Change CMD_DM enabling
CMD_DM is used for debug purpose and it shouldn't be enabled by default
via Kconfig. Unfortunately this is in the tree for quite a long time
that's why solution is to use imply DM for all targets which are
enabling DM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30 07:18:48 -04:00
Michal Simek
5ed063d10f Kconfig: Sort bool, default, select and imply options
Fix Kconfig bool, default, select and imply options to be
alphabetically sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-30 07:18:48 -04:00
Simon Glass
c1c3fe2307 env: Convert CONFIG_ENV_IS_IN... to a choice
At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).

Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.

Also expand the help for the 'nowhere' option and move it to the top since
it is the default.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-15 20:50:01 -04:00
Simon Glass
85fc970d74 Convert CONFIG_ENV_IS_IN_FLASH to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_FLASH

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-25 21:20:02 -04:00
Simon Glass
2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00
Paul Burton
d2b12a5767 boston: Setup memory ranges in FDT provided to Linux
The boston memory map isn't suited to the simple "all memory starting
from 0" approach that the MIPS arch_fixup_fdt() implementation takes.
Instead we need to indicate the first 256MiB of DDR from 0 and the rest
from 0x90000000. Implement ft_board_setup to do that.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 13:29:50 +02:00
Paul Burton
ed048e7c76 boston: Move CM GCRs away from flash
Move the MIPS Coherence Manager (CM) Global Configuration Registers
(GCRs) away from the region of the physical address space which the
Boston board's parallel flash is found in, such that we can access all
of flash without clobbering GCRs.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 13:29:50 +02:00
Paul Burton
939a255a67 MIPS: Make CM GCR base configurable
Without adding a prompt for CONFIG_MIPS_CM_BASE, Kconfig doesn't allow
defconfigs to set it. Provide the prompt in order to allow for that.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-12 13:29:50 +02:00
Álvaro Fernández Rojas
ee422142f4 MIPS: add initial infrastructure for Broadcom MIPS SoCs
CFE checks CPU Thread in a different way (using register $22):
mfc0	t1, C0_BCM_CONFIG, 3 # $22
li	t2, CP0_CMT_TPID # (1 << 31)
and	t1, t2
bnez	t1, 2f	# if we are running on thread 1, skip init
nop

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-10 16:16:09 +02:00
Daniel Schwierzeck
924ad86638 MIPS: add possibility to setup initial stack and global data in SRAM
This adds a new Kconfig option CONFIG_MIPS_INIT_STACK_IN_SRAM which
a SoC can select if it supports some kind of SRAM. Together with
CONFIG_SYS_INIT_SP_ADDR the initial stack and global data can be
set up in that SRAM. This can be used to provide a C environment
also for lowlevel_init().

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:11:46 +01:00
Daniel Schwierzeck
af3971f81a MIPS: make inclusion of ROM exception vectors configurable
This adds a compile time option to include code for static
exception vectors. Static exception vectors are only needed,
when the U-Boot entry point is equal to the CPU reset exception
vector address. For instance this is the case when U-Boot is
used as ROM in Qemu or booted from parallel NOR flash. When
U-Boot is booted from RAM (e.g. loaded there by SPL), the
exception vectors need to be setup dynamically, which is done
in follow-up commits.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-11-30 16:07:17 +01:00
Paul Burton
ad8783cb1c boston: Introduce support for the MIPS Boston development board
This patch introduces support for building U-Boot to run on the MIPS
Boston development board. This is a board built around an FPGA & an
Intel EG20T Platform Controller Hub, used largely as part of the
development of new CPUs and their software support. It is essentially
the successor to the older MIPS Malta board.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 16:24:36 +02:00
Paul Burton
566ce04de4 MIPS: Malta: Enable CM & L2 support
Enable support for the MIPS Coherence Manager & L2 caches on the MIPS
Malta board, removing the need for us to attempt to bypass the L2 during
boot (which would fail with recent CPUs that expose L2 config via the CM
anyway).

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 15:04:04 +02:00
Paul Burton
4baa0ab67d MIPS: L2 cache support
This patch adds support for initialising & maintaining L2 caches on MIPS
systems. The L2 cache configuration may be advertised through either
coprocessor 0 or the MIPS Coherence Manager depending upon the system,
and support for both is included.

If the L2 can be bypassed then we bypass it early in boot & initialise
the L1 caches first, such that we can start making use of the L1
instruction cache as early as possible. Otherwise we initialise the L2
first such that the L1s have no opportunity to generate access to the
uninitialised L2.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 15:04:04 +02:00
Paul Burton
b2b135d980 MIPS: Map CM Global Control Registers
Map the Global Control Registers (GCRs) provided by the MIPS Coherence
Manager (CM) in preparation for using some of them in later patches.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-09-21 15:04:04 +02:00
Zubair Lutfullah Kakakhel
ebf2b9e3df mips: Add MIPSfpga platform support
MIPSfpga is an FPGA based dev platform.

In a nutshell, its a microAptiv cpu core with lots of Xilinx IP blocks

The FPGA dev board used is the Nexys4DDR board by Digilent.

For more information, check the Readme file in board/imgtec/xilfpga

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-09-21 14:55:14 +02:00
Paul Burton
4b7b0a0f06 MIPS: Make CONFIG_SYS_DCACHE_LINE_SIZE int, not hex
For consistency with the other cache-related Kconfig entries & the
values actually set by boards, make CONFIG_SYS_DCACHE_LINE_SIZE an int
entry instead of a hex entry.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 372286217f ("MIPS: Split I & D cache line size config")
2016-06-10 12:27:37 +02:00
Paul Burton
372286217f MIPS: Split I & D cache line size config
Allow L1 Icache & L1 Dcache line size to be specified separately, since
there's no architectural mandate that they be the same. The
[id]cache_line_size functions are tidied up to take advantage of the
fact that the Kconfig entries are always present to simply check them
for zero rather than needing to #ifdef on their presence.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[removed CONFIG_SYS_CACHELINE_SIZE in include/configs/pic32mzdask.h]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-31 09:44:24 +02:00
Paul Burton
ace3be4f15 MIPS: Move cache sizes to Kconfig
Move details of the L1 cache line sizes & total sizes into Kconfig,
defaulting to 0. A new CONFIG_SYS_CACHE_SIZE_AUTO Kconfig entry is
introduced to allow platforms to select auto-detection of cache sizes,
and it defaults to being enabled if none of the cache sizes are set by
the configuration (ie. sizes are all the default 0), and code is
adjusted to #ifdef on that rather than on the definition of the sizes
(which will always be defined even if 0).

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-31 09:44:24 +02:00
Daniel Schwierzeck
5f9cc363ed MIPS: add tune for MIPS 34kc
Add tune Kconfig option for MIPS 34kc.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-31 09:38:11 +02:00
Paul Burton
0f832b9cdc malta: Allow MIPS64 builds
Both real Malta boards & emulators that mimic Malta (eg. QEMU) can
support MIPS64 CPUs. Allow MIPS64 builds of U-Boot for such boards,
which enables the user to make use of the whole 64 bit address space.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-31 09:38:11 +02:00
Paul Burton
6242aa1374 malta: Use device model & tree for UART
Make use of device model & device tree to probe the UART driver. This is
the initial step in bringing Malta up to date with driver model, and
allows for cleaner handling of the different I/O addresses for different
system controllers by specifying the ISA bus address instead of a
translated memory address.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-26 01:34:13 +02:00
Paul Burton
40ba13c986 malta: Support MIPS32r6 configurations
Both real Malta boards & QEMU's Malta emulation can feature MIPS32r6
CPUs. Allow building U-Boot for such systems by selecting
CONFIG_SUPPORTS_CPU_MIPS32_R6 for Malta.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-21 01:36:39 +02:00
Paul Burton
c52ebea1cc MIPS: Support for targetting MIPSr6
Add support for targetting MIPS32r6 & MIPS64r6 systems, in the same way
that we currently select release 1 or release 2 targets. MIPSr6 is not
entirely backwards compatible with earlier releases of the architecture.
Some instructions are encoded differently, some are removed, some are
reused, so it is not practical to run U-Boot built for earlier revisions
on a MIPSr6 system. Update their Kconfig help text to reflect that.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-21 01:36:39 +02:00
Paul Burton
20286cdff7 MIPS: Simplify CONFIG_SYS_CPU values
Rather than having the values for CONFIG_SYS_CPU depend upon each
architecture revision, have them depend upon the more general
CONFIG_CPU_MIPS32 & CONFIG_CPU_MIPS64 which in turn depend upon the
architecture revisions.

This is done in preparation for adding MIPSr6 support, which would
otherwise need to introduce new cases here.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-05-21 01:36:39 +02:00
Marek Vasut
0a0a958b68 mips: Add MIPS 74Kc tune
Add MIPS 74Kc tune Kconfig option.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wills Wang <wills.wang@live.com>
[added missing tune-y entry in arch/mips/Makefile]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21 01:36:38 +02:00
Wills Wang
1d3d0f1f1c mips: add base support for QCA/Atheros ath79 SOCs
This patch add some common code for QCA/Atheros ath79 SOCs such as
DDR tuning, chip reset and CPU detection.

Signed-off-by: Wills Wang <wills.wang@live.com>
2016-05-21 01:25:50 +02:00
Robert P. J. Day
1cc0a9f496 Fix various typos, scattered over the code.
Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller
2016-05-05 21:39:26 -04:00
Purna Chandra Mandal
32c1a6eef8 MIPS: initial infrastructure for Microchip PIC32 architecture
Create initial directory, Kconfigs needed for PIC32 architecture
support. Also add PIC32 specific register definition required for drivers.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-01 22:14:00 +01:00
Paul Burton
05e342554e MIPS: Support dynamic I/O port base address
The existing mips_io_port_base variable isn't suitable for use early
during boot since it will be stored in the .data section which may not
be writable pre-relocation. Fix this by moving the I/O port base address
into struct arch_global_data. In order to avoid adding this field for
all targets, make this dependant upon a new Kconfig entry
CONFIG_DYNAMIC_IO_PORT_BASE. Malta is the only board which sets a
non-zero I/O port base, so select this option only for Malta.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2016-02-01 22:13:25 +01:00
Daniel Schwierzeck
f53830e74e MIPS: kconfig: add option for MIPS_L1_CACHE_SHIFT
Add Kconfig symbol for L1 cache shift like the kernel does.
The value of CONFIG_SYS_CACHELINE_SIZE is not a reliable source
for ARCH_DMA_MINALIGN anymore, because it is optional on MIPS.
If CONFIG_SYS_CACHELINE_SIZE is not defined by a board, the
cache sizes are automatically detected and ARCH_DMA_MINALIGN
would be set to 128 Bytes.

The default value for CONFIG_MIPS_L1_CACHE_SHIFT is 5 which
corresponds to 32 Bytes. All current MIPS boards already used
that value. While on it, fix the Malta board to use a value of 6
like the kernel port does.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16 21:06:46 +01:00
Daniel Schwierzeck
0315a28909 MIPS: Kconfig: optimize gcc -march and -mtune setup
Move setup of -march to arch/mips/Makefile and follow the design on ARM.
Also add a possibility to chose specific CPU tune options.

Signed-off-by: Wills Wang <wills.wang@live.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16 21:06:46 +01:00
Joe Hershberger
c9bb942e2f Move default y configs out of arch/board Kconfig
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:17:55 -04:00
Joe Hershberger
a26cd04920 arch: Make board selection choices optional
By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
2015-05-12 18:10:02 -04:00
Daniel Schwierzeck
90b1c9fad7 MIPS: implement device-tree handover to Linux kernel
Add device-tree handover to Linux kernel conforming with MIPS UHI [1].
Register $a0 will be set to the reserved value -2. The address of
the device-tree blob will be stored as KSEG0 address in $a1. $a2 and
$a3 are set to zero.

[1] http://prplfoundation.org/wiki/MIPS_documentation

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-04-24 12:15:34 +02:00
Paul Burton
dd7c72006e MIPS: allow systems to skip loads during cache init
Current MIPS systems do not require that loads be performed to force the
parity of cache lines, a simple invalidate by clearing the tag for each
line will suffice. Thus this patch makes the loads & subsequent second
invalidation conditional upon the CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
option, and defines that for existing mips32 targets. Exceptions are
malta where this is known to be unnecessary, and qemu-mips where caches
are not implemented.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-29 12:55:01 +01:00
Daniel Schwierzeck
9d638eeab7 MIPS: add Kconfig option for CONFIG_SWAP_IO_SPACE
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21 14:06:51 +01:00
Daniel Schwierzeck
c57dafb5b4 MIPS: replace $(CPU) with Kconfig symbols
Conditionally set head-y and lib-y with boolean Kconfig symbols
for selected CPU. This deprecates the usage of the $(CPU) variable.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21 14:06:04 +01:00
Daniel Schwierzeck
5002d8cc54 MIPS: bootm: prepare a flattened device tree for the kernel
Add the initial code to prepare a flattened device tree for
the kernel like relocating the FDT blob and fixing up the
/chosen and /memory nodes.

The final hand over to the kernel is not yet implemented. After
the community agreed on the MIPS boot interface for device trees,
the corresponding code will be added.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21 14:02:49 +01:00
Daniel Schwierzeck
ca65e5851f MIPS: bootm: refactor preparation of Linux kernel environment
Move preparation of Linux kernel environment in a separate
function and mark it as legacy. Add a Kconfig option to make
that legacy mode configurable.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21 14:02:48 +01:00
Daniel Schwierzeck
25fc664f40 MIPS: bootm: refactor preparation of Linux kernel command line
Move preparation of Linux kernel command line in a separate
function and mark it as legacy. Add a Kconfig option to make
that legacy mode configurable.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2015-01-21 14:02:48 +01:00