Commit graph

10 commits

Author SHA1 Message Date
Andy Fleming
e0c4fac79d TQM85xx: Fix a couple warnings in TQM8548 build
The ecm variable in sdram.c was being declared for all 8548, but only
used by specific 8548 boards, so we make that variable require those
specific boards, too

The nand code was using an index "i" into a table, and then re-using "i"
to set addresses for each upm.  However, then it relied on the old value
of i still being there to enable things.  Changed the second "i" to "j"

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:06:03 -06:00
Wolfgang Grandegger
cf07a5baec MPC85xx: TQM8548: workaround for erratum DDR 19 and 20
This patch adds the workaround for erratum DDR20 according to MPC8548
Device Errata document, Rev. 1: "CKE signal may not function correctly
after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
processor version 2.1 and the work-around must be removed.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2009-02-16 18:06:02 -06:00
Wolfgang Grandegger
dc5f55d636 MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration
This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
module.

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2009-02-16 18:06:01 -06:00
Wolfgang Grandegger
88b0e88d18 MPC85xx: TQM8548: fix SDRAM timing for 533 MHz
According to new TQM8548 timing specification:
Refresh Recovery: 34 -> 53 clocks
CKE pulse width:  1 -> 3 cycles
Window for four activities: 13 -> 14 cycles

Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2009-02-16 18:06:00 -06:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Wolfgang Grandegger
1287e0c55a TQM8548: Basic support for the TQM8548 modules
This patch adds basic support for the TQM8548 module from TQ-Components
(http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
eTSEC 3 and 4

Furthermore Flash buffer write has been enabled to speed up output to
the Flash by approx. a factor of 10.

Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-11 00:01:43 -05:00
Wolfgang Grandegger
518d5cfe72 TQM85xx: Bugfix in the SDRAM initialisation
The CS0_BNDS register is now set according to the detected
memory size.

Signed-off-by Martin Krause <martin.krause@tqs.de>
2008-06-10 23:58:58 -05:00
Wolfgang Grandegger
b99ba1679e TQM85xx: Various coding style fixes
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 23:52:56 -05:00
Wolfgang Grandegger
4677988c7e TQM: move TQM boards to board/tqc
Move all TQM board directories to the vendor specific directory "tqc"
for modules from TQ-Components GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Renamed from board/tqm85xx/sdram.c (Browse further)