Commit graph

1894 commits

Author SHA1 Message Date
Marek Vasut
55d0f982f3 test: cmd: fdt: Test fdt get size
Add 'fdt get size' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get size of various properties
- Get node count of available nodes
- Test non-existent nodes and properties

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
1b025afca4 test: cmd: fdt: Test fdt get addr
Add 'fdt get addr' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get address of various properties
- Compare addresses calculated by UT and fdt command

This test is special in that it has to go through gruesome remapping scheme
where the test calculates:
- pointer offsets of the generated FDT root and the property being tested
- map_sysmem() result of environment variable "fdtaddr" and the one set
  by the test matching address of property being tested
- difference between the later and the former, to obtain offset of the
  DT property from start of DT
The offsets must match in both the UT and the tested U-Boot, if they do
not, the test fails.

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
4e22e12e3f test: cmd: fdt: Test fdt get name
Add 'fdt get name' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get name of / node 0, 1 and /clk-test node 0
- Compare output and validate the node name
- Get name of / node 2 and /clk-test node 1
- Compare output and validate the node is not present
- Get name of / node -1 and /clk-test node -1
- Compare output and validate the node name equals node 0 name
- Check nonexistent node, verify the command errors out

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
4efea813ef test: cmd: fdt: Test fdt resize
Add 'fdt resize' test which works as follows:
- Create simple FDT with extra size 0, map it to sysmem
- 'resize' the FDT by 0x2000 bytes
- Verify the new space has been added to the FDT

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
79bcd809f4 test: cmd: fdt: Test fdt move
Add 'fdt move' test which works as follows:
- Create simple FDT, map it to sysmem
- 'move' the FDT into new zeroed out sysmem location
- Verify newly active FDT is in the new location
- Compare both locations

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
e2d7daa6c9 test: cmd: fdt: Test both string and integer arrays in 'fdt get value'
The 'fdt get value' subcommand now supports extraction of integer value
from integer arrays, add test for it, including a test for special case
unindexed integer array read, which is handled as hash and treated as a
long string instead of integer.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:48 -08:00
Marek Vasut
ed14576b59 test: cmd: fdt: Test alias resolution in 'fdt get value'
The 'fdt' command help contains the following note:
"
Dereference aliases by omitting the leading '/', e.g. fdt print ethernet0.
"
Add test for it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
21e1d93b14 test: cmd: fdt: Generate fuller DT internally and switch fdt get value to it
Implement function to generate internal test DT fragment and switch
the 'fdt get value' test to this instead of depending on the sandbox
DT. Rename clk-test node to test-node node. This FDT fragment will be
reused by other tests. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
38805e03f0 test: cmd: fdt: Rename fdt_test_get() to fdt_test_get_value()
The 'fdt get' command has a 'get value' subcommand, rename the fdt_test_get()
to fdt_test_get_value() to avoid confusion about what it is testing. There is
currently no get 'get name', 'get addr', 'get size' subcommand test.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
4a9fe8cbe6 test: cmd: fdt: Rename fdt_test_resize() to fdt_test_addr_resize()
The 'fdt' command has a 'resize' subcommand, rename the fdt_test_resize()
to fdt_test_addr_resize() to avoid confusion about what it is testing.
There is currently no resize test.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-09 08:50:47 -08:00
Marek Vasut
3998b45e31 test: cmd: fdt: Add list of remaining missing tests
Add list of missing tests for the 'fdt' command, currently
the missing sandbox tests are only 'fdt boardsetup' and
'fdt checksign' .

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:15:14 -08:00
Marek Vasut
26281517c6 test: cmd: fdt: Test fdt bootcpu
Add 'fdt bootcpu' test which works as follows:
- Create basic FDT, map it to sysmem
- Print the FDT bootcpu
- Set the FDT bootcpu and read the value back using 'fdt header get'
- Perform the previous step twice to validate bootcpu overwrite

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:15:13 -08:00
Marek Vasut
e46a438c59 test: cmd: fdt: Test fdt rm
Add 'fdt rm' test which works as follows:
- Create fuller FDT, map it to sysmem
- Selectively delete nodes or properties by both path and aliases
- Verify created nodes or properties using fdt print command

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:14:29 -08:00
Marek Vasut
6c28594bf6 test: cmd: fdt: Test fdt mknode
Add 'fdt mknode' test which works as follows:
- Create fuller FDT, map it to sysmem
- Create node either in / or subnode
- Attempt to create node over existing node, which fails
- Attempt to create subnodes in non-existing nodes or aliases
- Verify created nodes using fdt list command

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:14:29 -08:00
Marek Vasut
8bd49a87d9 test: cmd: fdt: Test fdt set
Add 'fdt set' test which works as follows:
- Create fuller FDT, map it to sysmem
- Set either existing property to overwrite it, or new property
- Test setting both single properties as well as string and integer arrays
- Test setting to non-existent nodes and aliases
- Verify set values using 'fdt get value'

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:14:29 -08:00
Marek Vasut
66e975a23e test: cmd: fdt: Test fdt get size
Add 'fdt get size' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get size of various properties
- Get node count of available nodes
- Test non-existent nodes and properties

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:14:29 -08:00
Marek Vasut
b6d1dece4f test: cmd: fdt: Test fdt get addr
Add 'fdt get addr' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get address of various properties
- Compare addresses calculated by UT and fdt command

This test is special in that it has to go through gruesome remapping scheme
where the test calculates:
- pointer offsets of the generated FDT root and the property being tested
- map_sysmem() result of environment variable "fdtaddr" and the one set
  by the test matching address of property being tested
- difference between the later and the former, to obtain offset of the
  DT property from start of DT
The offsets must match in both the UT and the tested U-Boot, if they do
not, the test fails.

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:14:28 -08:00
Marek Vasut
890d3fcbed test: cmd: fdt: Test fdt get name
Add 'fdt get name' test which works as follows:
- Create fuller FDT, map it to sysmem
- Get name of / node 0, 1 and /clk-test node 0
- Compare output and validate the node name
- Get name of / node 2 and /clk-test node 1
- Compare output and validate the node is not present
- Get name of / node -1 and /clk-test node -1
- Compare output and validate the node name equals node 0 name
- Check nonexistent node, verify the command errors out

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 13:14:28 -08:00
Marek Vasut
8fa2835228 test: cmd: fdt: Test fdt resize
Add 'fdt resize' test which works as follows:
- Create simple FDT with extra size 0, map it to sysmem
- 'resize' the FDT by 0x2000 bytes
- Verify the new space has been added to the FDT

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Marek Vasut
05728722dd test: cmd: fdt: Test fdt move
Add 'fdt move' test which works as follows:
- Create simple FDT, map it to sysmem
- 'move' the FDT into new zeroed out sysmem location
- Verify newly active FDT is in the new location
- Compare both locations

The test case can be triggered using:
"
./u-boot -Dc 'ut fdt'
"
To dump the full output from commands used during test, add '-v' flag.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Marek Vasut
f1df20a135 test: cmd: fdt: Test both string and integer arrays in 'fdt get value'
The 'fdt get value' subcommand now supports extraction of integer value
from integer arrays, add test for it, including a test for special case
unindexed integer array read, which is handled as hash and treated as a
long string instead of integer.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Marek Vasut
39e072701c test: cmd: fdt: Test alias resolution in 'fdt get value'
The 'fdt' command help contains the following note:
"
Dereference aliases by omitting the leading '/', e.g. fdt print ethernet0.
"
Add test for it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Marek Vasut
d6729765ff test: cmd: fdt: Generate fuller DT internally and switch fdt get value to it
Implement function to generate internal test DT fragment and switch
the 'fdt get value' test to this instead of depending on the sandbox
DT. Rename clk-test node to test-node node. This FDT fragment will be
reused by other tests. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Marek Vasut
025b9d8e47 test: cmd: fdt: Rename fdt_test_get() to fdt_test_get_value()
The 'fdt get' command has a 'get value' subcommand, rename the fdt_test_get()
to fdt_test_get_value() to avoid confusion about what it is testing. There is
currently no get 'get name', 'get addr', 'get size' subcommand test.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Marek Vasut
ab40fafe96 test: cmd: fdt: Rename fdt_test_resize() to fdt_test_addr_resize()
The 'fdt' command has a 'resize' subcommand, rename the fdt_test_resize()
to fdt_test_addr_resize() to avoid confusion about what it is testing.
There is currently no resize test.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:57 -08:00
Simon Glass
7b7f1bf30d test: Add concurrencytest to the requirements
This allows tests to run in parallel and speeds up some tests markedly,
particularly with binman. Add it to the requirements.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:56 -08:00
Simon Glass
4583c00236 patman: Move library functions into a library directory
The patman directory has a number of modules which are used by other tools
in U-Boot. This makes it hard to package the tools using pypi since the
common files must be copied along with the tool that uses them.

To address this, move these files into a new u_boot_pylib library. This
can be packaged separately and listed as a dependency of each tool.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:49 -08:00
Simon Glass
4f806f31fc bootflow: Rename bootflow_flags_t
These flags actually relate to the iterator, not the bootflow struct
itself. Rename them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-08 11:40:49 -08:00
Dzmitry Sankouski
72471620e8 video console: add 12x22 console simple font test
Tests fonts wider than a byte.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07 16:00:18 +01:00
Dzmitry Sankouski
4f6e34811d video console: move vidconsole_get_font_size() logic to driver ops
Since multiple vidconsole drivers exists, vidconsole_get_font_size()
implementation cannot longer live in vidconsole_uclass.c file.

Move current vidconsole_get_font_size logic to truetype driver ops.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-03-07 15:59:21 +01:00
Simon Glass
d577459497 test: Tidy up sandbox handling in test-main
This is pretty messy at present since it relies on a SPL_SANDBOX option
that does not exist. Use the normal options instead, so that it will work
with split config.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-03-02 17:45:58 -05:00
Simon Glass
a11be4c303 tpm: Implement tpm_auto_start() for TPMv1.2
Add an implementation of this, moving the common call to tpm_init() up
into the common API implementation.

Add a test.

Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-28 09:44:33 +02:00
Simon Glass
4fef657151 tpm: Separate out the TPM tests for v1 and v2
Currently there is only one test and it only works on TPM v2. Update it
to work on v1.2 as well, using a new function to pick up the required
TPM.

Update sandbox to include both a v1.2 and v2 TPM so that this works.
Split out the existing test into two pieces, one for init and one for
the v2-only report_state feature.

Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-28 09:44:30 +02:00
Ilias Apalodimas
1b11de766f test: add a test for the new tpm_auto_start() function
A prior patch adds a new API function for TPM2.0, which performs
the full startup sequence of the TPM.  Add a selftest for that.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-28 09:44:28 +02:00
Tom Rini
5b197eee33 Prepare v2023.04-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmP9LHYACgkQFHw5/5Y0
 tyw3Ogv+IhcqqlK1MpF6me6j0nyZpl5Vc29J+ghO8xPr/nzEhlcq8HUcBdM8QaEd
 3oMkD6m6HsZMWjrz/eWM5Oa742j/yqfbr+6H7NwFutyNOQ/aIrCoD9fbAzszd2ii
 fANFn0vftOApnqn0dHXqodam31+MrOWnffcz2jyJXvhwcFxYDcv5yboFsFA5GVtA
 5l3ko8PGaRp/RwNAqMlEWX3DgXWKjglIo+yiyntJqh3HJ+t3BMlwIrhq1NdWQxPk
 M3K5znl836bb10ULXeItGMtdlPviqRKzqqgy6HgVU/66qaoJUFzdL0kyydWqR/Zv
 5XrFvvyYT9go3IA6mnZmNsO4/L/lEUEOXRsQWoPxW/QROuNtltuEpxwjmg+pDLlr
 9uV/ZdEGtHj/fEPEs6BdslnrQmGGA0akzBh85jcofE8Lm7+7RB1uIj9hUrOub4Qr
 DKQHUORVmu3qVOQgK03VIHBg43figMCEU4voZbuFeVUdXC6FQHpQrxSxL7uemrvW
 Cg8/Hyrc
 =PwNP
 -----END PGP SIGNATURE-----

Merge tag 'v2023.04-rc3' into next

Prepare v2023.04-rc3
2023-02-27 17:28:21 -05:00
Pali Rohár
ce0f745c36 CI: Update test/nokia_rx51_test.sh to use prebuilt images
Now that the Dockerfile creates images which have the binaries we
require included, have CI make symlinks for them and update the existing
script to support this.

Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-24 11:54:44 -05:00
Simon Glass
c1d266a781 trace: Relax test requirements
We expect the profile and bootstage to agree on timing, but when
running on slow machines there can be a larger descrepency. Increase the
tolerance to fix this.

Fixes: 9cea4797ae ("trace: Add a test")
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-23 13:29:20 -05:00
Simon Glass
9a8a27a76a dm: test: Add a test for the various migration combinations
Test that:

- sandbox shows a warning when an unmigrated DT is used
- sandbox fails to run when migration is turned off
- sandbox_spl fails to build when migration is turned off

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:27 -07:00
Simon Glass
7e91bf892f test: Add a way to set the environment for a pytest
This is useful when we need to control a particular environment variable.
Add a way to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:27 -07:00
Simon Glass
e316fbabbf dm: treewide: Complete migration to new driver model schema
Update various build and test components to use the new schema.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:27 -07:00
Samuel Holland
5a675abfe7 reset: Allow reset_get_by_name() with NULL name
This allows devm_reset_control_get(dev, NULL) to work and get the first
reset control, which is common in code ported from Linux.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230122000252.53642-2-samuel@sholland.org
2023-02-12 13:44:20 -05:00
Samuel Holland
2050f824e1 clk: Allow clk_get_by_name() with NULL name
This allows devm_clock_get(dev, NULL) to work and get the first clock,
which is common in code ported from Linux.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230122000252.53642-1-samuel@sholland.org
2023-02-12 13:44:20 -05:00
Simon Glass
9cea4797ae trace: Add a test
Add a test which runs sandbox, collects a trace and makes sure it can
be processed by trace-cmd. This should ensure that this feature continues
to work as U-Boot and trace-cmd evolve.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-11 12:22:35 -05:00
Dzmitry Sankouski
ea6fdc1359 dm: button: add support for linux_code in button-gpio.c driver
Linux event code must be used in input devices, using buttons.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-10 12:50:01 -05:00
Dzmitry Sankouski
298ffdd5d6 test: create dedicated fdt node for ofnode_for_each_prop test
Property count may change in /buttons node, if more button tests added,
and this will break ofnode_for_each_prop.
Add separate node for mentioned test.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-10 12:50:01 -05:00
Tom Rini
1975a3b1f6 test: lmb: Rework lib_test_lmb_max_regions test to scale
First, this test depends on CONFIG_LMB_USE_MAX_REGIONS, so add that as a
test before building. Second, instead of using a hard-coded value of 8,
which is the default of CONFIG_LMB_USE_MAX_REGIONS previously, use that
directly and update the comments. The only trick here is that one part
of the test itself also was written with the value of 8 itself in mind.
Rework the size of the lmb region we allocate to scale with the value of
CONFIG_LMB_USE_MAX_REGIONS.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-08 14:09:39 -05:00
Linus Walleij
41a29f284c cmd: Add a SEAMA image load command
Add a command to load SEAMA (Seattle Image), a NAND flash
on-flash storage format.

This type of flash image is found in some D-Link routers such
as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and
DCH-M225, as well as in WD and NEC routers on the ath79
(MIPS), Broadcom BCM53xx, and RAMIPS platforms.

This U-Boot command will read and decode a SEAMA image from
raw NAND flash on any platform. As it is always using big endian
format for the data decoding is always necessary on platforms
such as ARM.

The command is needed to read a SEAMA-encoded boot image on the
D-Link DIR-890L router for boot from NAND flash in an upcoming
port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx)
architecture.

A basic test and documentation is added as well. The test must
be run on a target with NAND flash support and at least one
resident SEAMA image in flash.

Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06 17:10:15 -05:00
Simon Glass
662cfa03cb arm: qemu: Move GUIDs to the C file
These are only used in one place, so move them there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06 13:04:53 -05:00
Linus Walleij
0c1413f6d7 test: bootdev: Do not require USB to compile test
This test will block compilation of the entire test suite
on platforms without USB support. Make the extern
"usb_started" conditional on USB host or gadget and
define a dummy flag if neither is enabled.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-06 13:04:52 -05:00
Nikhil M Jain
2f3d6a4230 test: dm: test-fdt: Add decode_panel_timing test
To test decode_panel_timing add a panel-timings node
and a DM test for decode panel timingd by matching
the panel timing node parameters.

Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-04 18:15:14 +01:00
Mark Kettenis
08386da0c6 test: Add test for mapping IOMMUs for PCI devices
Test that we correctly probe an IOMMU that is mapped by an
"iommu-map" device tree property of a PCIe controller node.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 14:47:58 -05:00
Mark Kettenis
49a1a4becb test: Add test for IOMMU uclass map/unmap ops
Test that the map and unmap operations work for devices that
have DMA translated by an IOMMU and devices that don't have
DMA translated by an IOMMU.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 14:47:58 -05:00
Massimo Pegorer
b93a65209c mkimage: fit: Support signed configurations in 'auto' FITs
Extend support for signing in auto-generated (-f auto) FIT. Previously,
it was possible to get signed 'images' subnodes in the FIT using
options -g and -o together with -f auto. This patch allows signing
'configurations' subnodes instead of 'images' ones (which are hashed),
using option -f auto-conf instead of -f auto. Adding also -K <dtb> and
-r options, will add public key to <dtb> file with required = "conf"
property.

Summary:
    -f auto => FIT with crc32 images
    -f auto -g ... -o ... => FIT with signed images
    -f auto-conf -g ... -o ... => FIT with sha1 images and signed confs

Example: FIT with kernel, two device tree files, and signed
configurations; public key (needed to verify signatures) is
added to u-boot.dtb with required = "conf" property.

mkimage -f auto-conf -A arm -O linux -T kernel -C none -a 43e00000 \
        -e 0 -d vmlinuz -b /path/to/first.dtb -b /path/to/second.dtb \
        -k /folder/with/key-files -g keyname -o sha256,rsa4096 \
        -K u-boot.dtb -r kernel.itb

Example: Add public key with required = "conf" property to u-boot.dtb
without needing to sign anything. This will also create a useless FIT
named unused.itb.

mkimage -f auto-conf -d /dev/null -k /folder/with/key-files \
        -g keyname -o sha256,rsa4096 -K u-boot.dtb -r unused.itb

Signed-off-by: Massimo Pegorer <massimo.pegorer@vimar.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-27 12:51:27 -05:00
Simon Glass
a950f2855a bootstd: Record the bootdevs used during scanning
Add a way to record the bootdevs used when scanning for bootflows. This is
useful for testing.

Enable this only with BOOTSTD_FULL and do the same for the progress
reporting.

Re-enable and update the affected tests now that we have this feature.

For bootdev_test_order_default() there is no-longer any support for using
the bootdev aliases to specify an ordering, so drop that part of the test.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
4b7cb058df bootstd: Drop the old bootflow_scan_first()
This function is not used outside tests. Drop it and rename
bootflow_scan_dev() since it is how we start a scan now.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
91943ff703 bootstd: Allow scanning a single bootdev label
We want to support scanning a single label, like 'mmc' or 'usb0'. Add
this feature by plumbing the label through to the iterator, setting a
flag to indicate that only siblings of the initial device should be used.

This means that scanning a bootdev by its name is not supported anymore.
That feature doesn't seem very useful in practice, so it is no great loss.

Add a test for bootdev_find_by_any() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
47aedc29dc bootstd: Switch bootdev scanning to use labels
At present we set up the bootdev order at the start, then scan the
bootdevs one by one.

However this approach cannot be used with hunters, since the bootdevs may
not exist until the hunter is used. Nor can we just run all the hunters at
the start, since that violate's U-Boot's 'lazy init' requirement. It also
increases boot time.

So we need to adjust the algorithm to scan by labels instead. As a first
step, drop the dev_order[] array in favour of a list of labels. Update the
name of bootdev_setup_iter_order() to better reflect what it does.

Update some related comments and log messages. Also disable a few tests
until a later commit where we can use them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
18552d2a72 bootstd: Add a hunter for the extension feature
This needs to run before any bootdev is used, so add a hunter for it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
43e89a3069 bootstd: Allow iterating to the next bootdev priortiy
Add a function which moves to the next priority to be processed.

This works by storing the current priority in the bootflow iterator. The
logic to set this up is included in a subsequent commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
e4b694893f bootstd: Allow iterating to the next label in a list
Add a function which moves to the next label in a list of labels. This
allows processing the boot_targets environment variable.

This works using a new label list in the bootflow iterator. The logic to
set this up is included in a subsequent commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
66e3dce787 bootstd: Allow hunting for a bootdev by label
Add a function to hunt for a bootdev label and find the bootdev produced
by the hunter (or already present).

Add a few extra flags so that we can distinguish between "mmc1", "mmc" and
"1" which all need to be handled differently.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
eacc261178 bootstd: Add a new pre-scan priority for bootdevs
We need extensions to be set up before we start trying to boot any of the
bootdevs. Add a new priority before all the others for tht sort of thing.
Also add a 'none' option, so that the first one is not 0.

While we are here, comment enum bootdev_prio_t fully and expand the test
for the 'bootdev hunt' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
79a7d4a61f bootstd: Allow hunting for bootdevs of a given priority
Add a way to run the hunter function for a particular priority, so that
new bootdevs can be found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
d9f48579dc bootstd: Treat DHCP and PXE as bootdev labels
These are associated with the ethernet boot device but do not match its
uclass name, so handle them as special cases.

Provide a way to pass flags through with the bootdev so that we know
how to process it. The flags are checked by the bootmeths, to ensure that
only the selected bootmeth is used.

While these both use the network device, they work quite differently. It
is common to run only one of these, or to run PXE before DHCP. Provide
bootflow flags to control which methods are used. Check these in the two
bootmeths so that only the chosen one is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
0c1f4a9fb1 bootstd: Add a SPI flash bootdev
Add a bootdev for SPI flash so that these devices can be used with
standard boot. It only supports loading a script.

Add a special case for the label, since we want to use "spi", not
"spi_flash".

Enable the new bootdev on sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
081bdc52c1 sandbox: Allow SPI flash bootdevs to be disabled for tests
Most tests don't want these and they can create a lot of noise. Add a way
to disable them. Use that in tests, with a flag provided to enable them
for tests that need this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:41 -05:00
Simon Glass
7638c85190 bootstd: Include the device tree in the bootflow
Some bootmeths provide a way to load a device tree as well as the base
OS image. Add a way to store this in the bootflow. Update the
'bootflow info' command to show this information.

Note that the device tree is not allocated, but instead is stored at
an address provided by an environment variable. This may need to be
adjusted at some point, but for now it works well and fits in with the
existing distro-boot scripts.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
a60f7a3e35 bootstd: Add a virtio bootdev
Add a bootdev for virtio so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
902400201d virtio: Avoid strange behaviour on removal
This device does a check on removal which is better handled in the actual
test. Move it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
758c706c68 bootstd: Add an NVMe bootdev
Add a bootdev for NVMe so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
0d77f8f1ca bootstd: Add an IDE bootdev
Add a bootdev for IDE so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
8f090b67d0 bootstd: Add a SCSI bootdev
Add a bootdev for SCSI so that these devices can be used with standard
boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
f0e358f07d bootstd: Only scan bootable partitions
At present all partitions are scanned, whether marked bootable or not.
Use only bootable partitions, defaulting to partition 1 if none is
found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
dcffa4428d part: Add a function to find the first bootable partition
If a disk has a bootable partition we are expected to use it to locate the
boot files. Add a function to find it.

To test this, update mmc1 to have two paritions, fixing up other tests
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
4146c823fc bootstd: Add a hunter for ethernet
Sometimes ethernet devices are attached to PCI. Since it is quick to scan,
add this into the ethernet hunter.

Run dhcp to establish the network connection. Drop this from the bootdev
since that is not needed now. Update a log message for clarity.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
843160fa7a bootstd: Add an MMC hunter
Add a hunter for MMC. This doesn't do anything at present, since MMC is
currently set up when U-Boot starts. If MMC moves to lazy init then we can
add a hunter function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
04fb2b6e45 bootstd: Add a USB hunter
Add a hunter for USB which enumerates the bus to find new bootdevs.

Update the tests and speed up bootdev_test_prio() while we are here, by
dropping the USB delays.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
c7b63d500d bootstd: Support running bootdev hunters
Add a way to run a bootdev hunter to find bootdevs of a certain type. Add
this to the 'bootdev hunt' command. Test for this are added in a later
patch, since a useful test needs some hunters to work with.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
bd90b09288 bootstd: Add the concept of a bootdev hunter
Some bootdevs must be enumerated before they appear. For example, USB
bootdevs are not visible until USB is enumerated.

With standard boot this needs to happen automatically, since we only
want to enumerate a bus if it is needed.

Add a way to define bootdev 'hunters' which can be used to hunt for
bootdevs of a given type. Track which ones have been used and add a
command to list them.

Include a clang work-around which seems to be needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:40 -05:00
Simon Glass
70dd88657b sandbox: Allow ethernet bootdevs to be disabled for tests
Most tests don't want these and can create a lot of noise. Add a way to
disable them. Use that in tests, with a flag provided to enable them for
tests that need this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
ecb274cf06 dm: test: Correct ordering of DM setup
We must call dm_scan_other() after devices from the device tree have been
created, since that function behaves differently if there is no bootstd
device.

Adjust the logic to achieve this.

Also fix the bootflow_system() test which was relying on this broken
behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
d94d9844bc dm: part: Update test to use mmc2
At present this test sets up a partition table on mmc1. But this is used
by the bootstd tests, so it is not possible to run those after this test
has run, without restarting the Python test harness.

This is inconvenient when running tests repeatedly with 'ut dm'. Move the
test to use mmc2, which is not used by anything.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3f23ce2b6c test: Drop duplicate restore of DM state
This code is present twice. Fix it so that it is only executed once.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
f229a8ee7e test: Fix the help for the ut command
The font help has an incorrect newline. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: cdd964e380 ("test: Tidy up help for ut command")
2023-01-23 18:11:39 -05:00
Simon Glass
3e96ed44e8 lib: Add a function to split a string into substrings
Some environment variables provide a space-separated list of strings. It
is easier to process these when they are broken out into an array of
strings.

Add a utility function to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
a0fb9de60d dm: test: Correct assertion in dm_test_part()
This obscures the line number. Update the test to avoid make sure that
the line which failed is displayed, so it is possible to diagnose the
failure.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Simon Glass
3d01254140 dm: core: Support sorting devices with dm tree
Add a -s flag to sort the top-level devices in order of uclass ID.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-23 18:11:39 -05:00
Brandon Maier
65d373abb0 test: compression: add zstd uncompression test
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
2023-01-18 19:41:15 -05:00
Enric Balletbo i Serra
601d1bfe9e test/py: gpt: add test for the gpt partition type GUID identifier
Add sandbox test for the gpt partition type command, the test uses the
persistent data test_gpt_disk_image.bin to check that the first
partition type GUID that identifies the type of the partition has the
"Linux filesystem data" type ( 0FC63DAF-8483-4772-8E79-3D69D8477DE4 ).

Signed-off-by: Enric Balletbo i Serra <eballetbo@redhat.com>
2023-01-18 13:11:13 -05:00
Brandon Maier
093e8c8de5 test: compression: use sizeof() instead of magic numbers
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
2023-01-18 12:46:13 -05:00
Simon Glass
e64c29521c bootstd: Support setting a theme for the menu
Allow a theme to be set. For now this is very simple, just a default font
size to use for all elements.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:51 -05:00
Simon Glass
d985f1dbdd bootstd: Add a test for the bootstd menu
Add a test which checks that two operating systems can be displayed in a
menu, allowing one to be selected.

Enable a few things on snow so that the unit tests build.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:51 -05:00
Simon Glass
fe93c14b4c expo: Add basic tests
Add some tests for the expo, including setting up and rendering an expo.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
24d8e1b37b bootstd: Allow reading a logo for the OS
Some operating systems provide a logo in bmp format. Read this in if
present so it can be displayed in the menu.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
2175e76a51 bootstd: Read the Operating System name for distro/scripts
Add the concept of an OS name to the bootflow. This typically includes the
OS name, version and kernel version.

Implement this for the distro and script bootmeths so that it works with
Armbian and older version of Fedora.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
0e38bd848d video: Add font functions to the vidconsole API
Support for fonts currently depends on the type of vidconsole in use. Add
two new methods to enumerate fonts and to set the font.

Fix a few other method comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 18:26:50 -05:00
Simon Glass
7d850f85aa sandbox: Enable mmc command and legacy images
The mmc command is useful for testing mmc disk images in sandbox, so
enable it. We also need to enable legacy images so that we can run tests
which use them.

Disable it for a few avb tests since MMC is not implemented there yet.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-16 14:14:11 -05:00
Ville Skyttä
fe482b886d Use grep -E or plain grep instead of egrep
`egrep` has been deprecated in GNU grep since 2007,
and since 3.8 it emits obsolescence warnings:
https://git.savannah.gnu.org/cgit/grep.git/commit/?id=a9515624709865d480e3142fd959bccd1c9372d1
Acked-by: Dhruva Gole <d-gole@ti.com>
2023-01-11 15:02:24 -05:00
Brandon Maier
bde4c49c17 test: compression: use ut_assert for errors
Use the ut_assert macros for more useful error messages.

Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-11 15:02:24 -05:00
Brandon Maier
43b059884a test: compression: check with trailing garbage in input
The Linux kernel appends 4 bytes to the end of compressed kernel Images
containing the uncompressed image size. They are used to make
self-decompressing Images easier. However for archs that don't support
self-decompression, like ARM64, U-Boot must be able to decompress the
image with the garbage data.

The existing decompressors already support this. This unit test was
added while working on zstd support as upstream zstd will error if there
is garbage data in the input buffer, and special care was needed to
support this.

Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-11 15:02:24 -05:00