Commit graph

56 commits

Author SHA1 Message Date
Michal Simek
52b36fd155 arm: zynq: Fix SPL SD boot mode
This patch is fixing two issues:
1. Insufficient stack size for fat fs buffers
2. Insufficient space in malloc area

Tested on zc702 and zc706.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14 20:08:15 +01:00
Michal Simek
809704eb4f arm: zynq: Move ZYNQ_SERIAL to Kconfig
Move cadence/zynq serial driver via Kconfig

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-28 16:08:45 +01:00
Michal Simek
7fad6125e4 arm: zynq: Enable FPGA/FPGA_XILINX via Kconfig
Enabling fpga via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 16:08:45 +01:00
Michal Simek
7111d6ed86 arm: zynq: Enable qspi for zc770_xm013
Enable qspi driver and flashes for this board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:08 +01:00
Michal Simek
20dff6f153 arm: zynq: Enable bootz command for Xilinx platforms
bootz command is valid way how to boot Linux kernel. Enable it by
default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28 15:53:08 +01:00
Tuomas Tynkkynen
ad12dc1844 cmd: Toggle the default value of CONFIG_CMD_IMLS
Having this as a 'default y' is rather annoying because it doesn't
actually compile unless other options are defined in the board header:

../cmd/bootm.c: In function 'do_imls_nor':
../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'?
   i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {

Make it 'default n' so people who develop new boards that start from a
blank defconfig have one less compilation failure to debug.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10 17:51:04 -04:00
Tom Rini
5dc4dfd2a9 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 07:16:32 -04:00
Simon Glass
2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00
Tom Rini
91d27a17c6 Kconfig: Migrate FS_FAT / FAT_WRITE
Now that these symbols are in Kconfig, migrate all users.  Use imply on
a number of platforms that default to having this enabled.  As part of
this we must migrate some straglers for CMD_FAT and DOS_PARTITION.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-03 17:55:34 -04:00
Simon Glass
fe7604a3bc Convert CONFIG_CMD_FPGA_LOADBP et al to Kconfig
This converts the following to Kconfig:
   CONFIG_CMD_FPGA_LOADBP
   CONFIG_CMD_FPGA_LOADFS
   CONFIG_CMD_FPGA_LOADMK
   CONFIG_CMD_FPGA_LOADP

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-22 09:33:57 -04:00
Masahiro Yamada
e856bdcfb4 flash: complete CONFIG_SYS_NO_FLASH move with renaming
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.

During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH".  Flipping the logic will
make the code more readable.  Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.

This commit was created as follows:

[1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

[3] Rename the instances in defconfigs by the following:
  find . -path './configs/*_defconfig' | xargs sed -i \
  -e '/CONFIG_SYS_NO_FLASH=y/d' \
  -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

[4] Change the conditionals by the following:
  find . -name '*.[ch]' | xargs sed -i \
  -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
  -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
  -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
  -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

[5] Modify the following manually
  - Rename the rest of instances
  - Remove the description from README
  - Create the new Kconfig entry in drivers/mtd/Kconfig
  - Remove the old Kconfig entry from common/Kconfig
  - Remove the garbage comments from include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:30:25 -05:00
Tom Rini
e5ec48152a Kconfig: Migrate BOARD_LATE_INIT to a select
This option should not really be user selectable.  Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)
2017-01-24 10:35:54 -05:00
Jagan Teki
3788b451e3 config: Move CONFIG_BOARD_LATE_INIT to defconfigs
Cc: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 15:12:33 -05:00
Michal Simek
6ebf8a4a9d ARM: zynq: Move CONFIG_SYS_TEXT_BASE to Kconfig
Enable CONFIG_SYS_TEXT_BASE via Kconfig.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:18:11 +01:00
Masahiro Yamada
c27269953b mmc: complete unfinished move of CONFIG_MMC
Commit 7a777f6d6f ("mmc: Add generic Kconfig option") created
a Kconfig entry for this option without any actual moves, then
commit 44c798799f ("sunxi: Use Kconfig CONFIG_MMC") moved
instances only for SUNXI.

We generally do not like such partial moves.  This kind of work
is automated by tools/moveconfig.py, so it is pretty easy to
complete this move.

I am adding "default ARM || PPC || SANDBOX" (suggested by Tom).
This shortens the configs and will ease new board porting.

This commit was created as follows:

[1] Edit Kconfig (remove the "depends on", add the "default",
    copy the prompt and help message from Linux)

[2] Run 'tools/moveconfig.py -y -s -r HEAD MMC'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-29 13:08:07 -05:00
Heiko Schocher
c20ae2ffaa spl: move SPL_OS_BOOT to Kconfig
Move SPL_OS_BOOT to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-14 21:11:33 -04:00
Lokesh Vutla
19a9747535 common/Kconfig: Add DISPLAY_CPUINFO
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default
in certain architectures.  Migrate all config files.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12 08:04:34 -04:00
Simon Glass
c2ae7d8220 Kconfig: Move SPL settings into their own file
Move the SPL settings into common/spl where most of the SPL code is kept.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16 17:03:36 -04:00
Michal Simek
3c70349f8e xilinx: Sync defconfigs with the latest Kconfig layout
Update Microblaze, Zynq and ZynqMP defconfigs to reflect
latest Kconfig changes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-08-02 06:54:42 +02:00
Siva Durga Prasad Paladugu
766d2609dd zynq: defconfig: Remove unnecessary board specific config files
Remove unnecessary board specifc config files for
zynq boards(microzed, picozed, ZC770(all), zed) and point
to zynq common config file.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 15:16:43 +02:00
Siva Durga Prasad Paladugu
05f4cc344f zynq: config: Enable CONFIG_SYS_NO_FLASH through defconfig
Enable config CONFIG_SYS_NO_FLASH through defconfig
for all zynq boards.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 14:06:11 +02:00
Michal Simek
72d8d5d773 ARM: zynq/zynqmp: Use the default CONFIG_BOOTDELAY=2
Based on:
"ARM: uniphier: use the default CONFIG_BOOTDELAY=2"
(sha1: 7c8ef0feb9)

"I do not insist on CONFIG_BOOTDELAY=3. The default value in Kconfig,
CONFIG_BOOTDELAY=2, is just fine for these boards."

Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 13:35:54 +02:00
Heiko Schocher
bb597c0eeb common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option
move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.

Signed-off-by: Heiko Schocher <hs@denx.de>

Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-09 13:53:05 -04:00
Michal Simek
ad5b580126 ARM: zynq: Simplify zynq configuration
Extending Kconfig for adding new platform is a lot of work
for nothing. Setting SYS_CONFIG_NAME directly in Kconfig and
remove all dependencies on TARGET_ZYNQ_* options including SPL.
As a side-effect it also remove custom init folder for ps7_init_gpl.*
files. Folder is chosen based on device-tree file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24 13:22:50 +02:00
Tom Rini
89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00
Tom Rini
78d1e1d0a1 configs: Re-sync almost all of cmd/Kconfig
This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:40 -04:00
Tom Rini
adad96e60d configs: Re-sync HUSH options
Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files.  Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 14:22:43 -04:00
Michal Simek
dce7e11fe1 ARM: zynq: Move FLASH_BAR to Kconfig
Clean up config and use Kconfig more.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Michal Simek
448bce733c ARM: zynq: Enable SPI_FLASH for zc770 xm013 platform
Enable SPI flash.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Siva Durga Prasad Paladugu
c5ca2db63b ARM: zynq: Define sys prompt for all Zynq boards
Define CONFIG_SYS_PROMPT for all Zynq boards

It was removed by:
"kconfig: add config option for shell prompt"
(sha1: 181bd9dc61)

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Nathan Rossi
5c9b1d735e arm: zynq: Enable SPL_DM_SEQ_ALIAS for all Zynq configs
This feature is required in SPL to enable support for loading from SPI
flash when the device is booted from QSPI.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-13 13:20:02 +01:00
Michal Simek
7bccc75a2b net: gem: Add driver dependencies to PHYLIB
Clear driver dependecies via Kconfig. Remove PHYLIB dependency from
the driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-18 13:15:58 +01:00
Michal Simek
596e5782e7 net: gem: Move gem to Kconfig
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-12-07 10:14:28 +01:00
Michal Simek
5df825d490 ARM: zynq: Remove PHYLIB from config to defconfig
Move PHYLIB from board config to defconfig

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-12-07 09:59:04 +01:00
Thomas Chou
e4aa8edb6e common: add CMD_GPIO to Kconfig
Add CMD_GPIO to Kconfig and run tools/moveconfig.py .

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-18 14:50:06 -05:00
Simon Glass
fa43f69e03 arm: zynq: Use separate device tree instead of embedded
Production boards should not use CONFIG_OF_EMBED. Fix this for the Zybo
boards.

The image to use now becomes u-boot-dtb.bin.

For example, the .bif file should contain a line like:

  [load = 0x04000000,startup=0x04000000]/path/to/u-boot-dtb.bin

instead of:

  [load = 0x04000000,startup=0x04000000]/path/to/u-boot.bin

When device tree is enabled we need to load u-boot-dtb.img. Change the
settings so that SPL does the right thing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:52 +01:00
Simon Glass
5553f000fc Revert "ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC boot"
This reverts commit 321f86e18d.

The original bug has been fixed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-on: Zedboard and ZC706 board
Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-on: zc702
Tested-by: Michal Simek <michal.simek@xilinx.com>
2015-10-24 13:50:37 -04:00
Bin Meng
80df691349 Reorder defconfigs with 'savedefconfig'
Some boards' defconfigs are disordered. Reorder them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-09-28 09:06:13 -04:00
Masahiro Yamada
739968f2ad zynq: enable CONFIG_NET_RANDOM_ETHADDR
We have to set a MAC address to use network.
Otherwise, the tftpboot command fails with the following message:

  Gem.e000b000 Waiting for PHY auto negotiation to complete........ done
  *** ERROR: `ethaddr' not set

Since commit 92ac520821 ("net: Remove all references to
CONFIG_ETHADDR and friends"), we can not use CONFIG_ETHADDR.

The easiest way to set a MAC address is to enable
CONFIG_NET_RANDOM_ETHADDR.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:54 +02:00
Michal Simek
98b532b420 zynq: Make CONFIG_OF_EMBED default case
Use embedded DTB to let users use u-boot instead of u-boot-dtb.bin.
And fix SPL to use this target.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:48 +02:00
Jagan Teki
d065cfd9fd zynq: defconfig: Move CONFIG_OF_* to Kconfig
This commit moves:
- CONFIG_OF_CONTROL
- SPL_DISABLE_OF_CONTROL

from zynq_*_defconfig files into arch/arm/Kconfig "config ARCH_ZYNQ"

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-01 21:15:03 +05:30
Joe Hershberger
ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00
Joe Hershberger
c9bb942e2f Move default y configs out of arch/board Kconfig
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:17:55 -04:00
Simon Glass
47a785a9dd dts: Disable device tree for SPL on all boards
We plan to enable device tree in SPL by default. Before doing this,
explicitly disable it for all boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-10 19:26:55 -06:00
Joe Hershberger
6eed3786c6 net: Move the CMD_NET config to defconfigs
This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-01 09:40:15 -05:00
Joe Hershberger
bd328eb382 Clean all defconfigs with savedefconfig
In order to reduce merge conflicts and to maintain the simplest possible
defconfig files, we should be using the savedefconfig feature of Kconfig
every time a new feature is added. This keeps the defconfig settings to
a minimum (only those things not default) and keeps them in the same
order as the Kconfig options.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
2015-05-12 18:10:26 -04:00
Masahiro Yamada
5ca269a4df ARM: zynq: rename CONFIG_ZYNQ to CONFIG_ARCH_ZYNQ
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:05 +02:00
Masahiro Yamada
8981f05c03 ARM: zynq: use "select" instead of default value in defconfig
All the Zynq boards have switch to Driver Model.
"select DM" is better than default value in each defconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:31 -06:00
Masahiro Yamada
321f86e18d ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC boot
Since commit 326a682358 (malloc_f: enable SYS_MALLOC_F by default
if DM is on), Zynq MMC boot hangs up after printing the following:

    U-Boot SPL 2015.04-rc5-00053-gadcc570 (Apr 08 2015 - 12:59:11)
    mmc boot
    reading system.dtb

Prior to commit 326a682358, Zynq boards enabled CONFIG_DM, but
not CONFIG_SYS_MALLOC_F.  That commit forcibly turned on
CONFIG_SYS_MALLOC_F.  I have not figured out the root cause, but
anyway it looks like CONFIG_SYS_MALLOC_F gave a bad impact on the
Zynq MMC boot.

We are planning to have the v2015.04 release in a few days.
I know this is a defensive fixup, but what I can do now is to add
   # CONFIG_SYS_MALLOC_F is not set
to every Zynq defconfig file to get back the original behavior.

Tested on:
  - Zedboard
  - ZC706 board

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
2015-04-08 18:41:38 -04:00
Masahiro Yamada
252ed8729d kconfig: remove meaningless prefixes in defconfig files
Since commit e02ee2548a (kconfig: switch to single .config
configuration), the prefixes in defconfig files such as "+S:",
"+ST:", etc., are meaningless.

This commit was generated by the following command:

  find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-15 14:31:06 -04:00