Commit graph

66 commits

Author SHA1 Message Date
Masahiro Yamada
94b756f331 ARM: uniphier: refactor UMC init code for ProXstream2
Currently, a dummy value is defined for the UMC_SPCCTLA register
when the DRAM size is zero.  This seems weird because the controller
does not need setting in the first place if the size is zero.

Also, redefine enum dram_size to represent the DRAM size per 16-bit
unit.  This makes things simpler because the channel 0 and 1 are
connected with 32-bit width DRAM, while the channel 2 is connected
with 16-bit width one.

I am renaming SIZE_* into DRAM_SZ_* (and also FREQ_* to DRAM_FREQ_*
for consistency) while I am here because SIZE_* might be easily
mixed-up with the macros in include/linux/sizes.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
a54c879a42 ARM: uniphier: use pr_err() where possible
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
59fe23c2e0 ARM: uniphier: optimize ProXstream2 UMC init code with "for" loop
Now this code can be re-written with a "for" statement instead of
calling the same function multiple times.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
46abfcc99e ARM: uniphier: rework struct uniphier_board_data
This commit reworks "struct uniphier_board_data" with an array of
DRAM channel data in it.  It will allow further cleanups by means of
"for" statements that iterate over the DDR channels.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
8353266825 ARM: uniphier: remove unused umc_polling()
This function is unused.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-29 03:50:16 +09:00
Masahiro Yamada
f775c09d00 ARM: uniphier: adjust DDR clock delay line for ProXstream2
It turned out that DDR channel 2 was not working on ProXstream2
Vodka board.  Add the missing ACBLDR0 register setting to adjust
the delay between the clock lines and the address/command lines.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 17:07:46 +09:00
Masahiro Yamada
c9552895a8 ARM: uniphier: move cmd_ddrmphy.c to fix build error
If CONFIG_CMD_DDRMPHY_DUMP is enabled, the build fails.

Fixes: 93d92d46cd ("ARM: uniphier: add dump command for DDR Multi PHY registers")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 17:07:46 +09:00
Masahiro Yamada
126f9bad77 ARM: uniphier: fix makefiles to build cmd_ddr(m)phy.c
The U-Boot proper building needs to descend arch/arm/mach-uniphier/dram
to build these commands.

Fixes: 93d92d46cd ("ARM: uniphier: add dump command for DDR Multi PHY registers")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 17:07:46 +09:00
Masahiro Yamada
84a7562e49 ARM: uniphier: support some more DRAM use cases on PH1-Pro4 boards
Some of PH1-Pro4 boards are equipped with larger amount of DRAM than
the reference board.  Add UMC settings to support them.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-14 16:36:13 +09:00
Masahiro Yamada
048c61d674 ARM: uniphier: remove unneeded if conditionals
The if block does the same as the else block does.  The conditional
is not necessary at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20 08:40:33 +09:00
Masahiro Yamada
faefef9994 ARM: uniphier: move UMC register macros to umc-regs.h
The umc-proxstream2.c defiens the same macros as in umc-regs.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20 08:40:22 +09:00
Masahiro Yamada
93d92d46cd ARM: uniphier: add dump command for DDR Multi PHY registers
The ProXstream2/PH1-LD6b is integrated with a new IP for DDR PHY
which is not register-compatible with the former SoCs.
Add a new command to support the register dump of this IP.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-13 01:54:57 +09:00
Masahiro Yamada
15607d0d94 ARM: uniphier: add DRAM init code for ProXstream2/PH1-LD6b
As mentioned in the log of commit 019df879a9 (ARM: uniphier: add
ProXstream2 and PH1-LD6b support), the DRAM init code was missing
for a long time.  Finally, here it is.  SPL works now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-13 01:54:55 +09:00
Masahiro Yamada
107b3fb484 ARM: uniphier: move headers out of include/mach directory
These headers are only included locally in arch/arm/mach-uniphier/.
There is no reason to export them by putting in the mach/ directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-13 01:54:53 +09:00
Masahiro Yamada
9ca6616426 ARM: uniphier: move cmd_ddrphy.c to dram subdirectory
This command shows the register dump of the DDR PHY, so it would be
more at home in the dram subdirectory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-13 01:54:45 +09:00
Masahiro Yamada
33886693b6 ARM: uniphier: merge umc/ and ddrphy/ into a single directory
The UMC (Universal Memory Controller) and the DDR PHY block are
highly related to each other.  It is better to have both code in the
same directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-12-23 00:08:55 +09:00