Commit graph

3565 commits

Author SHA1 Message Date
Minghuan Lian
505f3e6f2e fsl_pci: use 'Header Type' field to judge PCIE mode
The original code uses 'Programming Interface' field to judge if PCIE is
EP or RC mode, however, T4240 does not support this functionality.
According to PCIE specification, 'Header Type' offset 0x0e is used to
indicate header type, so for PCIE controller, the patch changes code to
use 'Header Type' field to identify if the PCIE is EP or RC mode.

Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 03:03:16 -05:00
Tom Rini
99070db0dc Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	drivers/serial/serial_lh7a40x.c

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 18:23:38 -07:00
Hung-Te Lin
44abe47deb input: Add ANSI 3.64 escape sequence generation.
To support Non-ASCII keys (ex, Fn, PgUp/Dn, arrow keys, ...), we need to
translate key code into escape sequence.

(Updated by sjg@chromium.org to move away from a function to store
keycodes, so we can easily record how many were sent. We now need to
return this from input_send_keycodes() so we know whether keys were
generated.)

Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:44 -07:00
Marc Jones
59a1b72ced input: Fix i8042 keyboard reset
The i8042 keyboard reset was not checking the results of the output
buffer after the reset command. This can jam up some KBC/keyboards.
Also, remove a write to the wrong register and the CONFIG setting
around the incorrect write.

Signed-off-by: Marc Jones <marc.jones@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Louis Yung-Chieh Lo
45fe668f5f input: i8042: Provide feature to disable keyboard before booting kernel
The BIOS leaves the keyboard enabled during boot time so that any
keystroke would interfere kernel driver initialization.

Add a way to disable the keyboard to make sure no scancode will be
generated during the boot time. Note that the keyboard will be
re-enabled again after the kernel driver is up.

This code can be called from the board functions.
Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>

Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Gabe Black
48edb304d0 input: Provide a board specific mechanism to decide whether to skip i8042 init
This change adds a board overridable function which can be used to decide
whether or not to initialize the i8042 keyboard controller. On systems where
it isn't actually connected to anything, this can save a significant amount of
boot time.

On Stumpy, this saves about 200ms on boot.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Gabe Black
ef94f7fa64 input: Use finer grain udelays while waitng for the i8042 keyboard buffer to empty
On x86, the i8042 keyboard controller driver frequently waits for the keyboard
input buffer to be empty to make sure the controller has had a chance to
process the data it was given. The way the delay loop was structured, if the
controller hadn't cleared the corresponding status bit immediately, it would
wait 1ms before checking again. If the keyboard responded quickly but not
instantly, the driver would still wait a full 1ms when perhaps 1us would have
been sufficient. Because udelay is a busy wait anyway, this change decreases
the delay between checks to 1us.

Also, this change gets rid of a hardcoded 250ms delay.

On Stumpy, this saves 100-150ms during boot.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-19 15:25:43 -07:00
Alison Wang
39c7a26352 ColdFire: uart: fix build failure for missing header files
The following commit introduces some build failures for ColdFire
platform.

commit abaef69fbe
Author: Marek Vasut <marex@denx.de>
Date:   Thu Sep 13 16:51:38 2012 +0200

Add the missed header files.

Sign-off-by: Alison Wang <b18965@freescale.com>
2012-10-19 23:52:16 +08:00
Marek Vasut
2b758cad8d m68k: net: Fix unused variable in mcfmii.c
The following warning was produced, fix it:

mcfmii.c: In function 'mcffec_miiphy_write':
mcfmii.c:318:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: "Jin Zhengxiong-R64188" <R64188@freescale.com>
Cc: Jason Jin <jason.jin@freescale.com>
2012-10-19 23:47:41 +08:00
Marek Vasut
fb24ffc086 dm: Move s3c24xx USB driver to a proper place
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David Müller <d.mueller@elsoft.ch>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
2012-10-18 06:54:18 +02:00
Marek Vasut
d731282e7c dm: wdt: arm: Move tnetv107x into drivers/watchdog/
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Oliver Brown <obrown@adventnetworks.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: U-Boot DM <u-boot-dm@lists.denx.de>
2012-10-18 06:52:02 +02:00
Tom Rini
953cfd2878 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2012-10-17 09:03:59 -07:00
Marek Vasut
9cd2b9e47e kerneldoc: Annotate drivers/serial/serial.c
Add kerneldoc annotations into serial core.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:58:43 -07:00
Marek Vasut
dee1941604 serial: Reorder get_current()
Reorder the get_current() function to make it a bit more readable.
The code does not grow and there is minor change in the code logic,
where dev != NULL is now checked in any case.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:51 -07:00
Marek Vasut
6d93e25806 serial: Reorder serial_assign()
Reorder serial_assign() function to get rid of the extra level of
indentation. Also, adjust the return value to be -EINVAL instead of
positive one to be more consistent.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:50 -07:00
Marek Vasut
ec3fd68952 serial: Use default_serial_puts() in drivers
Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:50 -07:00
Marek Vasut
bfb7d7a3d6 serial: Implement default_serial_puts()
U-Boot contains a lot of duplicit implementations of serial_puts()
call which just pipes single characters into the port in loop. Implement
function that does this behavior into common code, so others can make
easy use of it.

This function is called default_serial_puts() and it's sole purpose
is to call putc() in loop on the whole string passed to it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
2012-10-17 07:55:50 -07:00
Albert ARIBAUD
b9f4bc34ac Remove lh7a40x cpu and serial driver
Since commit 957731ed (ARM: remove broken "lpd7a40x" boards),
lh7a40x cpu and serial driver have become unused. Remove them.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2012-10-16 18:00:36 +02:00
Tetsuyuki Kobayashi
f539094f48 i2c: sh_i2c: use setbits/clrbits macro
Use setbits/clrbits macro when read-modify-write register.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-10-16 05:47:21 +02:00
Tetsuyuki Kobayashi
0e5fb33cf7 i2c: sh_i2c.c: check error in i2c_read and i2c_write
Before this patch, i2c_{read,write} always returned 0.
Check TACK in i2c_raw_{read,write} so that i2c_{read,write} return non-zero when error.

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:20 +02:00
Tetsuyuki Kobayashi
d042d7121b i2c: sh_i2c: enable i2c_probe
Before this patch i2c_probe() always returned 0 and "i2c probe" command did not work properly.

Modify i2c_set_addr() to check TACK when waiting DTE and make i2c_probe() call this function.

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:20 +02:00
Tetsuyuki Kobayashi
020ec727a6 i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
sh_i2c.c support I2C0 and I2C1. This patch extends it to I2C4.

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:20 +02:00
Tetsuyuki Kobayashi
3ce2703d8f i2c: sh_i2c.c: adjust for SH73A0
Adjust i2c_raw_read() in sh_i2c.c to work for SH73A0.
After this patch, "i2c md" and "i2c mw" command on U-Boot work properly on KZM-A9-GT board.

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:20 +02:00
Tetsuyuki Kobayashi
57d7c80472 i2c: sh_i2c.c: correct BUSY bit define in ICSR
Correct BUSY bit define in ICSR from (1<<3) to (1<<4).

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:19 +02:00
Tetsuyuki Kobayashi
b1af67fe5e i2c: sh_i2c.c: support iccl and icch extension
R-mobile SoC (at least SH73A0) has extension bits to store 8th bit of iccl and icch.
This patch add support for the extentin bits.

Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-16 05:47:19 +02:00
Benoît Thébaudeau
414e1660c8 mx51: Fix USB PHY clocks
The i.MX51 has a single USB PHY clock, while the i.MX53 has two. These 3 clocks
have different clock gate control bit-fields.

The existing code was correct only for i.MX53, so this patch fixes the i.MX51
use case.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Jana Rapava <fermata7@gmail.com>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
2012-10-15 11:54:11 -07:00
Benoît Thébaudeau
1f5e4ee0b9 mx5: Use explicit clock gate names
Use clock gate definitions having names showing clearly the gated clock instead
of names giving only a register field index.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:10 -07:00
Matthias Weisser
e7bed5c2b3 imx: Use MXC_I2C_CLK in imx i2c driver
i2c didn't work on imx25 due to missing MXC_IPG_PERCLK. Now using
MXC_I2C_CLK on all imx systems using i2c.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-10-15 11:54:10 -07:00
Eric Nelson
0bb7e316f0 i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields
Add meaningful constants for each clock channels and use them for
enabling and disabling i.MX6 clocks.

Includes an update to enable/disable the IPU1 clock in
drivers/video/ipu_common to remove IMX5x register access
when used on i.MX6 as discussed in V1:

     http://patchwork.ozlabs.org/patch/185129/

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2012-10-15 11:54:08 -07:00
Lucas Stach
c0720afbb5 tegra: nand: add board pinmux
Boards may require a different pinmux setup for NAND than the default one.
Add a way to call into board specific code to set this up.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:07 -07:00
Tom Warren
150c24936b Tegra20: Move some include files to arch-tegra for sharing with Tegra30
The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h.
Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs
that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20'
'root' file.

All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-10-15 11:54:06 -07:00
Simon Glass
14813f19e3 input: Add debugging for key matrix key codes
These are read from the fdt - add a debug feature to display the mapping
on start-up.

See that we get debug output listing the keycodes

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
71dc6bca4e input: Allow key ghosting filter to be disabled
Some keyboards will not need a key ghosting filter, so make this feature
optional.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
1b1d3e6461 input: Separate out keyboard repeat/delay from init
It is inconvenient to have to specify the keyboard repeat and delay at
init time if it is not yet available, so move this into a separate
function.

Some drivers will want to do this when their keyboard init routine
is actually called.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Simon Glass
00f1099e09 input: Correct key_matrix fdt decoding
Some issues with this were not addressed in the previous series. Fix up
the binding decoding to deal with what is actually expected in the fdt.

This corrects the broken keyboard on seaboard.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-15 11:54:04 -07:00
Pavel Herrmann
e46a4350b4 sata.h: Make all sata/ata drivers include <sata.h>
- block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt
  not ulong.
- We also move the extern of sata_dev_desc into <sata.h>
- Remove now duplicate declarations from driver-specific headers.

Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
2012-10-15 11:54:03 -07:00
Tom Rini
0e7d856ea5 sil_sata: Make sata_write() comply with <part.h>
sata_write() takes a const void as the last argument.  Fixing this means
we also need to make ata_low_level_rw_lba{28,48} also take a const void.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:03 -07:00
Tom Rini
98391ff143 sata_dwc: Make sata_write() use const void, per <part.h>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
974d801401 pata_bfin: Make sata_{read,write}() comply with <part.h>
These functions take lbaint_t for blkcnt.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
40c030f8ff fsl_sata: Make sata_{read,write}() comply with <part.h>
- sata_write() takes a const void as the last argument.  Fixing this
  means we also need to make ata_low_level_rw_lba{28,48} also take a
  const void.
- Both sata_{read,write} take lbaint_t for blkcnt and ulong for blknr

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
dac8757100 dwc_ahsata: Make sata_write() comply with <part.h>
sata_write() takes a const void as the last argument.  Fixing this means
we also need to make ata_low_level_rw_lba{28,48} also take a const void.

Acked-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
5048a672d9 ata_piix: sata_write must take a const void argument.
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Tom Rini
879a57ac0e ata_piix: Fix checkpatch issues
While in here also:
- Switch to debug from custom PRINTF for debugging.
- Use mdelay rather than custom msleep.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:54:02 -07:00
Lukasz Dalek
3c09a2836d pxa25x: Add support for USB ethernet gadget
Add to pxa25x based devices support for USB ethernet gadget. This is a
port of pxa25x UDC driver from Linux kernel.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
2bb378841e usbether: Removed DEV_CONFIG_{CDC,SUBSET}
Removed DEV_CONFIG_CDC and DEV_CONFIG_SUBSET and replaced it with
CONFIG_USB_ETH_CDC and CONFIG_USB_ETH_SUBSET.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
4c43cd5a63 usbether: Define CONFIG_USB_ETH_{CDC,SUBSET}
Introduced CONFIG_USB_ETH_CDC and CONFIG_USB_ETH_SUBSET as preparation
for removal DEV_CONFIG_CDC and DEV_CONFIG_SUBSET

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lukasz Dalek
563aed2539 usbether: Fixed bug when using with PXA25X chips
PXA25X chips don't support alternate settings so driver uses non-CDC
driver.
But only code defined between DEV_CONFIG_CDC signals that network is up.
This patch is fixing this bug by signaling that network is up after USB
SET_INTERFACE request.

Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
2012-10-15 11:54:01 -07:00
Lucas Stach
141288b3a3 usb: ulpi: add indicator configuration function
Allows for easy configuration of the VBUS indicator related ULPI
config bits.

Also move the external indicator setup from ulpi_set_vbus() to
the new function.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-10-15 11:54:01 -07:00
Lucas Stach
7a46b2c7f2 usb: ehci: don't print debug output
This is clearly some sort of debug output and should not
be printed during normal operation.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-10-15 11:54:00 -07:00
Lucas Stach
a896211ff1 tegra20: port to new ehci interface
EHCI interface now supports more than one controller. Wire up our usb functions
to use this new interface.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
2012-10-15 11:54:00 -07:00