Commit graph

545 commits

Author SHA1 Message Date
Alexander Graf
c9cfac5d30 efi_loader: gop: Don't expose fb address
Recently Linux is gaining support for efifb on AArch64 and that support actually
tries to make use of the frame buffer address we expose to it via gop.

While this wouldn't be bad in theory, in practice it means a few bad things

  1) We expose 16bit frame buffers as 32bit today
  2) Linux can't deal with overlapping non-PCI regions between efifb and
     a different frame buffer driver

For now, let's just disable exposure of the frame buffer address. Most OSs that
get booted will have a native driver for the GPU anyway.

Signed-off-by: Alexander Graf <agraf@suse.de>
[trini: Remove line_len entirely]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27 15:39:57 -04:00
Alexander Graf
ae87440578 efi_loader: Clean up system table on exit
We put the system table into our runtime services data section so that
payloads may still access it after exit_boot_services. However, most fields
in it are quite useless once we're in that state, so let's just patch them
out.

With this patch we don't get spurious warnings when running EFI binaries
anymore.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27 15:39:56 -04:00
Alexander Graf
51735ae0ea efi_loader: Add bounce buffer support
Some hardware that is supported by U-Boot can not handle DMA above 32bits.
For these systems, we need to come up with a way to expose the disk interface
in a safe way.

This patch implements EFI specific bounce buffers. For non-EFI cases, this
apparently was no issue so far, since we can just define our environment
variables conveniently.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27 15:39:48 -04:00
Alexander Graf
0efe1bcf5c efi_loader: Add network access support
We can now successfully boot EFI applications from disk, but users
may want to also run them from a PXE setup.

This patch implements rudimentary network support, allowing a payload
to send and receive network packets.

With this patch, I was able to successfully run grub2 with network
access inside of QEMU's -M xlnx-ep108.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27 10:01:10 -04:00
Simon Glass
6dd9faf8f9 dm: part: Drop the block_drvr table
This is not needed since we can use the functions provided by the legacy
block device support.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00
Andreas Bießmann
09c2b8f3e3 Change my mailaddress
I'll switch my mails to my own server, so drop all gmail references.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2016-05-02 18:37:09 -04:00
Andreas Färber
dede284d1c efi_loader: Handle memory overflows
jetson-tk1 has 2 GB of RAM at 0x80000000, causing gd->ram_top to be zero.
Handle this by either avoiding ram_top or by using the same type as
ram_top to reverse the overflow effect.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:44 -04:00
Eric Nelson
6a3bf3e571 gunzip.c: use block layer for writes
Call blk_dwrite to ensure that the block cache is notified
if enabled and remove build breakage when CONFIG_BLK is enabled.

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2016-04-18 17:11:41 -04:00
Alexander Graf
cee752fa8d efi_loader: Expose ascending efi memory map
The EFI memory map does not need to be in a strict order, but 32bit
grub2 does expect it to be ascending. If it's not, it may try to
allocate memory inside the U-Boot data memory region.

We already sort the memory map in descending order, so let's just
reverse it when we pass it to a payload.

Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Andreas Färber <afaerber@suse.de>
2016-04-18 17:11:40 -04:00
Alexander Graf
36c37a8481 efi_loader: Always flush in cache line size granularity
The cache line flush helpers only work properly when they get aligned
start and end addresses. Round our flush range to cache line size. It's
safe because we're guaranteed to flush within a single page which has the
same cache attributes.

Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Andreas Färber <afaerber@suse.de>
2016-04-18 17:11:39 -04:00
Alexander Graf
ecbe1a07c5 efi_loader: Increase path string to 32 characters
Whenever we want to tell our payload about a path, we limit ourselves
to a reasonable amount of characters. So far we only passed in device
names - exceeding 16 chars was unlikely there.

However by now we also pass real file path information, so let's increase
the limit to 32 characters. That way common paths like "boot/efi/bootaa64.efi"
fit just fine.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:37 -04:00
Alexander Graf
8c3df0bf2e efi_loader: Add el torito support
When loading an el torito image, uEFI exposes said image as a raw
block device to the payload.

Let's do the same by creating new block devices with added offsets for
the respective el torito partitions.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:36 -04:00
Alexander Graf
4a12a97c14 efi_loader: Split drive add into function
The snippet of code to add a drive to our drive list needs to
get called from 2 places in the future. Split it into a separate
function.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-18 17:11:35 -04:00
Stefan Roese
456ecd08ec lib/crc8: Add crc start value
To make the usage of this function more flexible, lets add the CRC start
value as parameter to this function. This way it can be used by other
functions requiring different start values than 0 as well.

For non-zero CRC start values to work, I've reworked the function a bit.
The new implementation is copied from the Linux version in
drivers/i2c/i2c-core.c / i2c_smbus_pec(). Which supports non-zero
CRC stating values.

I've double-checked that the results for zero starting values are
identical to the results from the original version of this function.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-11 20:48:26 -04:00
Alexander Graf
38ce65e1fe efi_loader: Always allocate the highest available address
Some EFI applications (grub2) expect that an allocation always returns
the highest available memory address for the given size.

Without this, we may run into situations where the initrd gets allocated
at a lower address than the kernel.

This patch fixes booting in such situations for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-04-01 17:18:06 -04:00
Tom Rini
65b3c6bbae lib/physmem.c: Switch to __weak for arch_phys_memset
We normally use __weak rather than calling it out directly as an alias.
Update this function to the normal method.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-01 17:17:43 -04:00
Masahiro Yamada
6797630685 cosmetic: Fix typos "privide"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00
Alexander Graf
1cd29f0abd efi_loader: Fix some entry/exit points
When switching between EFI context and U-Boot context we need to swap
the register that "gd" resides in.

Some functions slipped through here, with efi_allocate_pool / efi_free_pool
not doing the switch correctly and efi_return_handle switching too often.

Fix them all up to make sure we always have consistent register state.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27 09:13:02 -04:00
Bin Meng
075bb5c6ea efi_stub: Move carriage return before line feed in putc()
A carriage return needs to execute before a line feed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-27 09:12:25 -04:00
Alexander Graf
be8d324191 efi_loader: Add GOP support
The EFI standard defines a simple boot protocol that an EFI payload can use
to access video output.

This patch adds support to expose exactly that one (and the mode already in
use) as possible graphical configuration to an EFI payload.

With this, I can successfully run grub2 with graphical output.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-27 09:12:12 -04:00
Tom Rini
f23baa572f cmd_dhry.c: Use lldiv for vax_mips calculation as well
Since dhry_per_sec is a u64 we must also use lldiv here when working
with it.  Otherwise:
../lib/dhry/cmd_dhry.c:(.text.do_dhry+0xd8): undefined reference to `__udivdi3'

On some platforms.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-17 10:14:25 -04:00
Simon Glass
69ca6fd850 x86: dts: Drop memory SPD compatible string
This is not needed now that the memory controller driver has the SPD data
in its own node.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:27 +08:00
Simon Glass
f215287bd5 dhry: Correct dhrystone calculation for fast machines
At present samus reports about 5600 DMIPS. With the default iteration count
this is OK, but if 10 million runs are performed it overflows. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-17 10:27:27 +08:00
Simon Glass
779653b0cb x86: Drop all the old pin configuration code
We don't need this anymore - we can use device tree and the new pinconfig
driver instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Alexander Graf
0f4060ebcb efi_loader: Pass proper device path in on boot
EFI payloads can query for the device they were booted from. Because
we have a disconnect between loading binaries and running binaries,
we passed in a dummy device path so far.

Unfortunately that breaks grub2's logic to find its configuration
file from the same device it was booted from.

This patch adds logic to have the "load" command call into our efi
code to set the device path to the one we last loaded a binary from.

With this grub2 properly detects where we got booted from and can
find its configuration file, even when searching by-partition.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15 21:30:14 -04:00
Alexander Graf
ed980b8c62 efi_loader: hook up in build environment
Now that we have all the bits and pieces ready for EFI payload loading
support, hook them up in Makefiles and KConfigs so that we can build.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
[trini: Enable only when we of OF_LIBFDT, disable on kwb and colibri_pxa270]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-15 21:30:11 -04:00
Alexander Graf
5d00995c36 efi_loader: Implement memory allocation and map
The EFI loader needs to maintain views of memory - general system memory
windows as well as used locations inside those and potential runtime service
MMIO windows.

To manage all of these, add a few helpers that maintain an internal
representation of the map the similar to how the EFI API later on reports
it to the application.

For allocations, the scheme is very simple. We basically allow allocations
to replace chunks of previously done maps, so that a new LOADER_DATA
allocation for example can remove a piece of the RAM map. When no specific
address is given, we just take the highest possible address in the lowest
RAM map that fits the allocation size.

Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 21:30:10 -04:00
Alexander Graf
2a22d05d33 efi_loader: Add disk interfaces
A EFI applications usually want to access storage devices to load data from.

This patch adds support for EFI disk interfaces. It loops through all block
storage interfaces known to U-Boot and creates an EFI object for each existing
one. EFI applications can then through these objects call U-Boot's read and
write functions.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
[trini: Update for various DM changes since posting]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-15 18:03:11 -04:00
Alexander Graf
50149ea37a efi_loader: Add runtime services
After booting has finished, EFI allows firmware to still interact with the OS
using the "runtime services". These callbacks live in a separate address space,
since they are available long after U-Boot has been overwritten by the OS.

This patch adds enough framework for arbitrary code inside of U-Boot to become
a runtime service with the right section attributes set. For now, we don't make
use of it yet though.

We could maybe in the future map U-boot environment variables to EFI variables
here.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 18:03:10 -04:00
Alexander Graf
c1311ad4e0 efi_loader: Add console interface
One of the basic EFI interfaces is the console interface. Using it an EFI
application can interface with the user. This patch implements an EFI console
interface using getc() and putc().

Today, we only implement text based consoles. We also convert the EFI Unicode
characters to UTF-8 on the fly, hoping that everyone managed to jump on the
train by now.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 18:03:09 -04:00
Alexander Graf
bee91169f5 efi_loader: Add boot time services
When an EFI application runs, it has access to a few descriptor and callback
tables to instruct the EFI compliant firmware to do things for it. The bulk
of those interfaces are "boot time services". They handle all object management,
and memory allocation.

This patch adds support for the boot time services and also exposes a system
table, which is the point of entry descriptor table for EFI payloads.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 18:03:06 -04:00
Alexander Graf
cb149c6634 efi_loader: Add PE image loader
EFI uses the PE binary format for its application images. Add support to EFI PE
binaries as well as all necessary bits for the "EFI image loader" interfaces.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-03-15 15:19:23 -04:00
Tom Rini
88033d737d Merge git://git.denx.de/u-boot-dm 2016-03-14 19:21:44 -04:00
Stefan Roese
ecb57f69b2 lib/crc16.c: Rename cyg_crc16() to crc16_ccitt() and add crc start value
The original name of this function is unclear. This patch renames this
CRC16 function to crc16_ccitt() matching its name with its
implementation.

To make the usage of this function more flexible, lets add the CRC start
value as parameter to this function. This way it can be used by other
functions requiring different start values than 0 as well.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:42 -04:00
Stefan Roese
7109157ff2 lib/crc16.c: Coding-style cleanup
lib/crc16.c is changed to match the common U-Boot coding-style.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:41 -04:00
Simon Glass
aa34fbc087 fdt: Allow libfdt to be used in SPL
Add an option to enable libfdt in SPL. This can be useful when decoding
FIT files in SPL.

We need to make sure this option is not enabled in SPL by this change.
Also this option needs to be enabled in host builds. Si add a new
IMAGE_USE_LIBFDT #define which can be used in files that are built on the
host but must also build for U-Boot and SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 19:18:26 -04:00
Simon Glass
73223f0e1b Kconfig: Move CONFIG_FIT and related options to Kconfig
There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-14 19:18:07 -04:00
Simon Glass
fd30d2c608 dm: fdtdec: Correct a sandbox build warning
Adjust the cast to avoid a warning when stdint.h is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
4101f68792 dm: Drop the block_dev_desc_t typedef
Use 'struct' instead of a typdef. Also since 'struct block_dev_desc' is long
and causes 80-column violations, rename it to struct blk_desc.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2016-03-14 15:34:50 -06:00
Simon Glass
3f603cbbb8 dm: Use uclass_first_device_err() where it is useful
Use this new function in places where it simplifies the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 15:34:50 -06:00
Simon Glass
69e173eb57 Move CONFIG_OF_LIBFDT to Kconfig
Move this option to Kconfig and tidy up existing boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:50:25 -04:00
Simon Glass
f8a2d7a416 libfdt: Add a function to write a property placeholder
The existing function to add a new property to a tree being built requires
that the entire contents of the new property be passed in. For some
applications it is more convenient to be able to add the property contents
later, perhaps by reading from a file. This avoids double-buffering of the
contents.

Add a new function to support this and adust the existing fdt_property() to
use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:19:11 -04:00
Simon Glass
c95fec3192 timer: Provide an early timer
In some cases the timer must be accessible before driver model is active.
Examples include when using CONFIG_TRACE to trace U-Boot's execution before
driver model is set up. Enable this option to use an early timer. These
functions must be supported by your timer driver: timer_early_get_count()
and timer_early_get_rate().

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-26 08:53:10 -07:00
Simon Glass
83cc112e82 lib: Don't instrument the div64 function
This function can be called from the timer code on instrumented functions.
Mark it as 'notrace' so that it doesn't cause infinite recursion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-02-26 08:53:10 -07:00
Simon Glass
d76592122b tegra: nyan-big: Move the LCD driver to driver model
Adjust the driver to use driver model. The SOR becomes a bridge device. We
use the normal simple_panel driver to handle the display itself. We also
need to enable some options such as regulators, PWMs and DM_VIDEO itself.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-02-16 09:17:51 -07:00
Stephen Warren
15b51878be Makefile: remove BUILD_TAG from KBUILD_CFLAGS
If BUILD_TAG is part of KBUILD_CFLAGS, then any time the value changes,
all files get rebuilt. In a continuous integration environment, the value
will change every build. This wastes time, assuming that incremental
builds would otherwise occur.

To solve this, remove BUILD_TAG from KBUILD_CFLAGS and add it to CFLAGS
for just the one file that uses it. This does have the disadvantage that
if any other files want to use the flag, we'll need to duplicate this
custom CFLAGS setup logic. However, it seems unlikely we'll need this.

An alternative would be to add BUILD_TAG to the "local version" and remove
the special case code from display_options.c. However, that would affect
the format of the U-Boot signon message, which may negatively affect
people looking for specific data there. The approach of using
file-specific CFLAGS was suggested by Masahiro Yamada.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-15 12:04:47 -05:00
Stephen Warren
1934665742 gunzip: remove avail_in recalculation
Current, the following passes:
    ./u-boot -d arch/sandbox/dts/test.dtb -c 'ut_image_decomp'
but the following fails:
    ./u-boot -d arch/sandbox/dts/test.dtb -c 'ut dm; ut_image_decomp'

This is because the gunzip code reads input data beyond the end of its
input buffer. In the first case above, this data just happens to be 0,
which just happens to trigger gzip to signal the error the decompression
unit test expects. In the second case above, the "ut dm" test has written
data to the accidentally-read memory, which causes the gzip code to take a
different path and so return a different value, which triggers the test
failure.

The cause of gunzip reading past its input buffer is the re-calculation of
s.avail_in in zunzip(), since it can underflow. Not only is the formula
non-sensical (it uses the delta between two output buffer pointers to
calculate available input buffer size), it also appears to be unnecessary,
since the gunzip code already maintains this value itself. This patch
removes this re-calculation to avoid the underflow and redundant work.

The loop exit condition is also adjusted so that if inflate() has consumed
the entire input buffer, without indicating returning Z_STREAM_END (i.e.
decompression complete without error), an error is raised. There is still
opportunity to simplify the code here by splitting up the loop exit
condition into separate tests. However, this patch makes the minimum
modifications required to solve the problem at hand, in order to keep the
Acked-by: Kees Cook <keescook@chromium.org>

diff simple.

I am not entirely convinced that the loop in zunzip() is necessary at all.
It could only be useful if inflate() can return Z_BUF_ERROR (which
typically means that it needs more data in the input buffer, or more space
in the output buffer), even though Z_FINISH is set /and/ the full input is
available in the input buffer /and/ there is enough space to store the
decompressed output in the output buffer. The comment in zlib.h after the
prototype of inflate() implies this is never the case. However, I assume
there must have been some reason for introducing this loop in the first
place, as part of commit "Fix gunzip to work for any gziped uImage size".

This patch is similar to the earlier b75650d84d "gzip: correctly
bounds-check output buffer", which corrected a similar issue for
s.avail_out.

Cc: Catalin Radu <Catalin@VirtualMetrix.com>
Cc: Kees Cook <keescook@chromium.org>
Fixes: f039ada5c1 ("Fix gunzip to work for any gziped uImage size")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-02-09 15:41:19 -07:00
Peng Fan
1889a7e275 fdt: introduce fdtdec_get_child_count
Introduce fdtdec_get_child_count for get the number of subnodes
of one parent node.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2016-02-06 14:43:04 +01:00
Simon Glass
512cab7e8e bzlib: Try another way to fix an unused variable
Use __maybe_unused which should avoid the Coverity error.

Reported-by: Coverity (CID: 134900)

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-02-06 13:59:48 +01:00
Bin Meng
a187559e3d Use correct spelling of "U-Boot"
Correct spelling of "U-Boot" shall be used in all written text
(documentation, comments in source files etc.).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2016-02-06 12:00:59 +01:00