Commit graph

663 commits

Author SHA1 Message Date
Simon Glass
48609d0789 dm: gpio: Add of-platdata support
Add support for accessing GPIOs using of-plata. This uses the same
mechanism as for clocks, but allows use of the xlate() method so that
the driver can interpret the parameters.

Update the condition for GPIO_HOG so that it is not built into SPL,
since it needs SPL_OF_REAL which is not enabled in sandbox_spl.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
9539738509 treewide: Use OF_REAL instead of !OF_PLATDATA
Now that we have a 'positive' Kconfig option, use this instead of the
negative one, which is harder to understand.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Simon Glass
414cc15144 treewide: Simply conditions with the new OF_REAL
Use this new Kconfig to simplify the compilation conditions where
appropriate.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Tom Rini
6674edaabf Prepare v2021.10-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmFBKRgACgkQFHw5/5Y0
 tyw/PwwAtGB3rBeYW4rjWuMC5WP1UDTnvZIAok5ImWumWDahjDm8Yq2VCzAe9adw
 EYBjuNmaNl9aQvGVqlVJeIcLku5MLuLQu2za8vhc1R8X9VTPPY+LLTcdOokOmB8y
 8JiaE7fJsb1bZeV+diF9tss3B0IkUrwSJtW1d+qfdz/4UiRvwK5BhnZgzIobDldO
 g1Ldz/xiR2GOAXlUMwDrNAi6qNvmeAqRsQxySVrjltAV2ST7LJnOiHuWvJX6g6VS
 l796Hleh/kULfEW6n+1ZaTNqvVRcJ8xYSOG8w8y9u6HuPBA3JrYH1p1Eo5n7PPDv
 US71Iy/ncweTyfTMEBThWLqjHOQ05sVkWX/r4fj2iJRli+Og53lE1fVJ4ajIx7vz
 Tc76wI43i0I5lr2yTErjUG6EzDDoueqd+c8BwxihNLUK/+QG31xoCEMfC80C25ro
 QhYVFgiPWN0ySUD5M5tbGXODvfNNIDKXpY5oSOTVtemZtDEMpO2zBM1s/K3RV7Ud
 Je9Pj0Cu
 =Me42
 -----END PGP SIGNATURE-----

Merge tag 'v2021.10-rc4' into next

Prepare v2021.10-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

# gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT
# gpg:                using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]

# Conflicts:
#	board/Arcturus/ucp1020/spl.c
#	cmd/mvebu/Kconfig
#	common/Kconfig.boot
#	common/image-fit.c
#	configs/UCP1020_defconfig
#	configs/sifive_unmatched_defconfig
#	drivers/pci/Kconfig
#	include/configs/UCP1020.h
#	include/configs/sifive-unmatched.h
#	lib/Makefile
#	scripts/config_whitelist.txt
2021-09-16 10:29:40 -04:00
Simon Glass
3232bdf0b3 pci: Drop DM_PCI
This option has not effect now. Drop it, using PCI instead where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-13 18:23:13 -04:00
Simon Glass
b2f9bac0e7 gpio: Add a GPIO config
At present we have SPL_GPIO and TPL_GPIO but not piain GPIO. This
works because there is a special build rule in Makefile that always
includes the drivers/gpio directory.

It is better to have all driver directories included by drivers/Makefile
and there is already a rule in there for this purpose. It just needs a
Kconfig for U-Boot proper, so add one.

Enable the option always for now, since this mimics current behaviour.
This can be updated once DM_GPIO is used everywhere.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:26:02 -04:00
Simon Glass
80a4876c86 tegra: gpio: Drop use of CONFIG_xxx variables
It is not a good idea to use things called CONFIG_xxx in the source code
since this prefix is reserved for use by Kconfig. Rename these variables.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-04 12:26:02 -04:00
Michal Simek
b4c2c151b1 Kconfig: Remove all default n/no options
default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00
Sebastian Reichel
0b3da993a4 gpio: mcp230xx: Introduce new driver
Introduce driver for I2C based MCP230xx GPIO chips, which are
quite common and already well supported by the Linux kernel.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-22 10:53:14 +02:00
Simon Glass
0b1284eb52 global: Convert simple_strtoul() with decimal to dectoul()
It is a pain to have to specify the value 10 in each call. Add a new
dectoul() function and update the code to use it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
7e5f460ec4 global: Convert simple_strtoul() with hex to hextoul()
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-08-02 13:32:14 -04:00
Simon Glass
83061dbd1c Rename GPIO_SUPPORT to GPIO
Rename these options so that CONFIG_IS_ENABLED can be used with them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-28 14:29:36 -04:00
Lukasz Majewski
2132fce7e1 i2c: pcf8575: Add support for 8 bit I2C IO expanders (like pca8574)
This patch add support for using NXP's pca8574 I2C IO expander, which
has only 8 IO lines.

After this change the .data member's information from struct udevice_id
are used to either sent one or two bytes.

Moreover, the '_le16' suffix from pcf8575_i2c_{write|read}_le16()
functions have been removed as now we also sent 8 bit data.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-23 07:13:25 -04:00
Lukasz Majewski
0119c91052 i2c: pcf8575: Remove not used members of pcf8575_chip structure
Those members are not used anymore as ones from gpio_dev_priv
structure (when DM_GPIO support is enabled) are used instead.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-23 07:13:25 -04:00
Stephan Gerhold
1e0b4c07bf gpio: Add driver for Nomadik GPIO
Nomadik GPIO is a fairly simple GPIO module used in the ST-Ericsson
Ux500 SoCs (and some older Nomadik SoCs). It uses registers where
each GPIO is represented as a single bit, plus "set" and "clear"
registers that allow updating the state without having to read the
existing state.

The driver implements support for it for use together with DM_GPIO
and the existing ste-dbx5x0.dtsi device tree.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14 16:47:56 -04:00
Stephan Gerhold
05e5ba2127 gpio: Drop long unused DB8500 GPIO driver
The original U-Boot port for the ST-Ericsson U8500 SoC was dropped
in commit 68282f55b8 ("arm: Remove unused ST-Ericsson u8500 arch").
Most of the drivers related to the old port were removed, but the
db8500_gpio.c driver was forgotten for some reason. There is no way
to select it and it does not compile anymore because of missing
headers, so let's just remove it.

The new port for U8500 introduced in commit 689088f9da
("arm: Add support for ST-Ericsson U8500 SoC") fully embraces the
new Driver Model and device trees where possible, so this is
preparation to add a new, simplified GPIO driver based on DM_GPIO.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14 16:47:55 -04:00
Tom Rini
570c3dcfc1 arm: Remove spear600 boards and the rest of SPEAr support
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
the last of the SPEAr platforms, so remove the rest of the remaining
support as well.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 22:22:42 -04:00
Tom Rini
6b69f15fd6 Xilinx changes for v2021.10
clk:
 - Add driver for Xilinx Clocking Wizard IP
 
 fdt:
 - Also record architecture in /fit-images
 
 net:
 - Fix plat/priv data handling in axi emac
 - Add support for 10G/25G speeds
 
 pca953x:
 - Add missing dependency on i2c
 
 serial:
 - Fix dependencies for DEBUG uart for pl010/pl011
 - Add setconfig option for cadence serial driver
 
 watchdog:
 - Add cadence wdt expire now function
 
 zynq:
 - Update DT bindings to reflect the latest state and descriptions
 
 zynqmp:
 - Update DT bindings to reflect the latest state and descriptions
 - SPL: Add support for ECC DRAM initialization
 - Fix R5 core 1 handling logic
 - Enable firmware driver for mini configurations
 - Enable secure boot, regulators, wdt
 - Add support xck devices and 67dr
 - Add psu init for sm/smk-k26 SOMs
 - Add handling for MMC seq number via mmc_get_env_dev()
 - Handle reserved memory locations
 - Add support for u-boot.itb generation for secure OS
 - Handle BL32 handoffs for secure OS
 - Add support for 64bit addresses for u-boot.its generation
 - Change eeprom handling via nvmem aliases
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYN105QAKCRDKSWXLKUoM
 IZiFAJ9CIiEpHiBbnAhA0VOMGoaXHGULywCdED/5dNgVtc1C7y4avzETbEyWzD4=
 =CdMa
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2021.10

clk:
- Add driver for Xilinx Clocking Wizard IP

fdt:
- Also record architecture in /fit-images

net:
- Fix plat/priv data handling in axi emac
- Add support for 10G/25G speeds

pca953x:
- Add missing dependency on i2c

serial:
- Fix dependencies for DEBUG uart for pl010/pl011
- Add setconfig option for cadence serial driver

watchdog:
- Add cadence wdt expire now function

zynq:
- Update DT bindings to reflect the latest state and descriptions

zynqmp:
- Update DT bindings to reflect the latest state and descriptions
- SPL: Add support for ECC DRAM initialization
- Fix R5 core 1 handling logic
- Enable firmware driver for mini configurations
- Enable secure boot, regulators, wdt
- Add support xck devices and 67dr
- Add psu init for sm/smk-k26 SOMs
- Add handling for MMC seq number via mmc_get_env_dev()
- Handle reserved memory locations
- Add support for u-boot.itb generation for secure OS
- Handle BL32 handoffs for secure OS
- Add support for 64bit addresses for u-boot.its generation
- Change eeprom handling via nvmem aliases
2021-07-01 08:57:23 -04:00
Marek Vasut
e9c9e9cbef gpio: renesas: Handle R8A779A0 V3U INEN register
The R8A779A0 V3U GPIO block has additional "General Input Enable" INEN
register. Add new R8A779A0 compatible string with a new quirk and also
a handler for this quirk which toggles the INEN register in the right
place. INEN register handling is based on "gpio: renesas: Add R8A779A0
V3U support" by Hai Pham <hai.pham.ud@renesas.com>

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-06-24 20:22:17 +02:00
Michal Simek
ca8bb0ccb7 gpio: pca953x: Add missing i2c dependency
pca953x also depends on i2c that's why add dependency to Kconfig.
Where GPIO is enabled but I2C compilation error pops up.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-06-23 09:48:35 +02:00
Marek Vasut
f10de23862 gpio: renesas: Pass struct udevice to rcar_gpio_set_direction()
Pass struct udevice to rcar_gpio_set_direction() in preparation of
quirk handling in rcar_gpio_set_direction(). No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-05-21 15:00:17 +02:00
Sean Anderson
430e136dc1 dm: gpio: Fix gpio_get_list_count failing with livetree
of_parse_phandle_with_args (called by dev_read_phandle_with_args) does not
support getting the length of a phandle list by using the index -1.
Instead, use dev_count_phandle_with_args which supports exactly this
use-case.

Fixes: 8558217153 ("gpio: Convert to use APIs which support live DT")

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-04 07:57:18 -04:00
Eugen Hristev
e1038ac0cb gpio: atmel_pio4: add support for sama7g5 pio4 version with 5 banks
Add support for sama7g5 pinctrl variant, with 5 banks with a degraded
8 line only 5th bank.
Based on Linux Kernel implementation.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2021-04-19 10:38:49 +03:00
Simon Glass
34f8fc7c85 gpio: Drop dm_gpio_set_dir()
This function is not used. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-12 17:45:40 -04:00
Simon Glass
7d252d0279 x86: Probe device if needed in intel_gpio_xlate()
The Intel GPIO binding allows GPIOs to be globally numbered, so that it
does not matter which GPIO bank is specified in the device tree. This is
convenient and avoid confusion since the banks do not have the same number
of GPIOs and the numbering is not sequential.

The GPIO uclass ensures that the device mentioned in the devicetree
binding is probed. It is fine for the driver to update gpio_desc to point
to a different driver, but this may not have been probed. If it has not
been, then it cannot be claimed since there is no uclass data.

We could handle this in the GPIO uclass but so far it is an unusual
situation so it is probably not worth the extra code. Handle this case in
the GPIO driver by probing the selected device if necessary.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 13:59:36 +13:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Bin Meng
271a87b4ec gpio: mpc8xxx: Support controller register physical address beyond 32-bit
dev_read_addr_size_index() returns fdt_addr_t which might be a
64-bit physical address. This might be true for some 85xx SoCs
whose CCSBAR is mapped beyond 4 GiB.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Simon Glass
8a45b22057 gpio: Add a way to read 3-way strapping pins
Using the internal vs. external pull resistors it is possible to get
27 different combinations from 3 strapping pins. Add an implementation
of this.

This involves updating the sandbox GPIO driver to model external and
(weaker) internal pull resistors. The get_value() method now takes account
of what is driving a pin:

   sandbox: GPIOD_EXT_DRIVEN - in which case GPIO_EXT_HIGH provides the
          value
   outside source - in which case GPIO_EXT_PULL_UP/DOWN indicates the
          external state and we work the final state using those flags and
          the internal GPIOD_PULL_UP/DOWN flags

Of course the outside source does not really exist in sandbox. We are just
modelling it for test purpose.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03 15:40:47 -05:00
Simon Glass
be04f1ab42 gpio: Define the log category in the uclass
This uses log_debug(), etc. but does not define the category. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03 15:40:11 -05:00
Simon Glass
d638a18357 gpio: sandbox: Track whether a GPIO is driven
Add a new flag to keep track of whether sandbox is driving the pin, or
whether it is expecting an input signal. If it is driving, then the value
of the pin is the value being driven (0 or 1). If not driving, then we
consider the value 0, since we don't currently handle things like pull-ups
yet.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:40:11 -05:00
Simon Glass
edab114775 gpio: x86: Drop the deprecated methods in intel_gpio
We don't need to implement direction_input() and direction_output()
anymore. Drop them and use update_flags() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03 15:40:11 -05:00
Simon Glass
3d64774716 gpio: Use an 'ops' variable everywhere
Update this driver to use the common method of putting the driver
operations in an 'ops' variable install of calling gpio_get_ops()
repeatedly. Make it const since operations do not change.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:40:11 -05:00
Simon Glass
ca1e1f57be gpio: Replace direction_input() and direction_output()
The new update_flags() method is more flexible since it allows the
driver to see the full flags all at once. Use that in preference to these
two functions. Add comments to that effect.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:40:11 -05:00
Simon Glass
7e0a96d559 dm: gpio: Add a way to update flags
It is convenient to be able to adjust some of the flags for a GPIO while
leaving others alone. Add a function for this.

Update dm_gpio_set_dir_flags() to make use of this.

Also update dm_gpio_set_value() to use this also, since this allows the
open-drain / open-source features to be implemented directly in the
driver, rather than using the uclass workaround.

Update the sandbox tests accordingly. This involves a lot of changes to
dm_test_gpio_opendrain_opensource() since we no-longer have the direciion
being reported differently depending on the open drain/open source flags.

Also update the STM32 drivers to let the uclass handle the active low/high
logic.

Drop the GPIOD_FLAGS_OUTPUT() macro which is no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Tested-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Tested-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:40:10 -05:00
Simon Glass
e87e86f31c gpio: sandbox: Make sandbox_gpio_set_flags() set all flags
Allow this function to see all flags, including the internal sandbox ones.
This allows the tests to fully control the behaviour of the driver.

To make this work, move the setting of GPIOD_EXT_HIGH -to where the flags
are updated via driver model, rather than the sandbox 'back door'.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:38:58 -05:00
Simon Glass
0242aecb4c gpio: sandbox: Fully separate pin value from output value
At present we have the concept of a pin's external value. This is what
is used when getting the value of a pin. But we still set the
GPIOD_IS_OUT_ACTIVE flag when changing the value. This is not actually
correct, since if the pin changes from output to input, the external
value need not change. Adjust the logic for this difference.

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:38:58 -05:00
Simon Glass
1f212afc4c gpio: sandbox: Use a separate flag for the value
At present with the sandbox GPIO driver it is not possible to change the
value of GPIOD_IS_OUT_ACTIVE unless the GPIO is an output. This makes it
hard to test changing the flags since we need to be aware of the internal
workings of the driver.

The feature is designed to aid testing.

Split this feature out into a separate sandbox-specific flag, so that the
flags can change unimpeded. This will make it easier to allow updating the
flags in a future patch.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03 15:38:58 -05:00
Simon Glass
a03a0aa7e8 gpio: sandbox: Rename GPIO dir_flags to flags
Adjust the terminology in this driver to reflect that fact that all flags
are handled, not just direction flags.

Create a new access function to get the full GPIO state, not just the
direction flags. Drop the static invalid_dir_flags since we can rely on a
segfault if something is wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 15:38:58 -05:00
Simon Glass
c0c1e62c6e gpio: Rename dm_gpio_get_dir_flags() to dm_gpio_get_flags()
This function can be used to get any flags, not just direction flags.
Rename it to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-03-03 14:51:06 -05:00
Simon Glass
9648789e26 dm: gpio: Rename get_dir_flags() method to get_flags()
It is more useful to be able to read all the flags, not just the direction
ones. In fact this is what the STM32 driver does. Update the method name
to reflect this.

Tweak the docs a little and use 'flagsp' as the return argument, as is
common in driver model, to indicate it returns a value.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-03-03 14:51:06 -05:00
Simon Glass
13979fc446 dm: gpio: Rename set_dir_flags() method to update_flags()
The current method is a misnomer since it is also used (e.g. by stm32) to
update pull settings and open source/open drain.

Rename it and expand the documentation to cover a few more details.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 14:51:06 -05:00
Simon Glass
4fe406729c gpio: Disable functions not used with of-platdata
These functions use devicetree and cannot work with of-platdata, which has
no runtime devicetree.

If they are used, the current linker error is confusing, since it talks
about missing functions in the bowels of driver model.

Avoid compiling these functions at all with of-platdata, so that a
straightforward link error points to the problem.

Series-changes; 3
- Fix 'wprl' typo

Signed-off-by: Simon Glass <sjg@chromium.org>

Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-03 14:51:06 -05:00
Tom Rini
2ae80437fb Merge branch '2021-02-02-drop-asm_global_data-when-unused'
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15 10:16:45 -05:00
Biwen Li
781188097d gpio: mpc8xxx_gpio: Fix for litte endian
Update gpio driver to use same logic for big-endian and little-endian

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:19 +05:30
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Harm Berntsen
98b64fe70b gpio: Add support for DM GPIO for Kirkwood
The Armada driver also works on Nedap's custom Kirkwood board with a
Marvell 88F6180 CPU. The original commit of that driver,
commit 704d9a645e ("gpio: Add DM GPIO driver for Marvell MVEBU"),
also mentions that this driver would be suitable for Kirkwood. This
does not completely replace the Kirkwood specific driver as there
are still boards depending on that driver.

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
CC: Stefan Roese <sr@denx.de>,
Reviewed-by: Stefan Roese <sr@denx.de>
2021-01-27 07:25:39 +01:00
Tom Rini
e262b2973e Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- New Allwinner H616 SoC support (sans Ethernet & USB)
- H6 DT update
- Tanix TX6 TV box support
- OrangePi 3 support
- OrangePi Zero2 (H616) support
2021-01-25 19:46:02 -05:00
Jernej Skrabec
7836ccf673 sunxi: gpio: introduce compatible for H616
H616 pinctrl is no different configuration wise than others, so just add
compatible for it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-25 21:52:01 +00:00
Weijie Gao
ca610ddf97 gpio: add GPIO controller driver for MediaTek MT7620 SoC
This patch adds GPIO controller driver for MediaTek MT7620 SoC

Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-01-24 21:39:26 +01:00
Patrick Delaunay
6dd89d9d5a gpio: stm32-gpio: migrate trace to dev and log macro
Change debug to dev_dbg macro and define LOG_CATEGORY.

Remove dev->name as it is already displayed by dev macro.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2021-01-13 09:52:58 +01:00