Commit graph

235 commits

Author SHA1 Message Date
Simon Glass
bbe41abf7f spl: Allow PCH drivers to be used in SPL
Add an option for building Platorm Controller Hub drivers in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
4a6c81ff42 spl: Allow timer drivers to be used in SPL
Add a new Kconfig option to allow timer drivers to be used in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
30bf8a0dae spl: Allow RTC drivers to be used in SPL
Add a new Kconfig option to allow RTC drivers to be used in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
2446b6b8f7 spl: Allow PCI drivers to be used in SPL
Add a new Kconfig option to allow PCI drivers to be used in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
5e148df952 spl: Allow CPU drivers to be used in SPL
Add a new Kconfig option to allow CPU drivers to be used in SPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Simon Glass
a704490034 spl: spi: Add a debug message if loading fails
This currently fails silently. Add a debug message to aid debugging.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06 11:38:46 +08:00
Masahiro Yamada
c0efc3140e ARM: uniphier: change CONFIG_SPL_PAD_TO to 128KB
The Boot ROM supports authentication feature to prevent malformed
software from being run on products.  The signature is added at the
tail of the second stage loader (= SPL in U-boot terminology).

The size of the second stage loader was 64KB, and it was consistent
across SoCs.  The situation changed when LD20 SoC appeared; it loads
80KB second stage loader, and it is the only exception.

Currently, CONFIG_SPL_PAD_TO is set to 64KB and U-Boot proper is
loaded from the 64KB offset of non-volatile devices.  This means the
signature of LD20 SoC (located at 80KB offset) corrupts the U-Boot
proper image.

Let's move the U-Boot proper image to 128KB offset.  It uses 48KB
for nothing but padding, and we could actually locate the U-Boot
proper at 80KB offset.  However, the power of 2 generally seems a
better choice for the offset address.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-29 20:59:08 +09:00
Masahiro Yamada
7b74c4b60b Revert "armv8: release slave cores from CPU_RELEASE_ADDR"
This reverts commit 8c36e99f21.

There is misunderstanding in commit 8c36e99f21 ("armv8: release
slave cores from CPU_RELEASE_ADDR").  How to bring the slave cores
into U-Boot proper is platform-specific.  So, it should be cared
in SoC/board files instead of common/spl/spl.c.  As you see SPL
is the acronym of Secondary Program Loader, there is generally
something that runs before SPL (the First one is usually Boot ROM).

How to wake up slave cores from the Boot ROM is really SoC specific.
So, the intention for the spin table support is to bring the slave
cores into U-Boot proper in an SoC specific manner.  (this must be
done after relocation.  see below.)

If you bring the slaves into SPL, it is SoC own code responsibility
to transfer them to U-Boot proper.  The Spin Table defines the
interface between a boot-loader and Linux kernel.  It is unrelated
to the interface between SPL and U-Boot proper.

One more thing is missing in the commit; spl_image->entry_point
points to the entry address of U-Boot *before* relocation.  U-Boot
relocates itself between board_init_f() and board_init_r().  This
means the master CPU sees the different copy of the spin code than
the slave CPUs enter.  The spin_table_update_dt() protects the code
*after* relocation.  As a result, the slave CPUs spin in unprotected
code, which leads to unstable behavior.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28 14:04:38 -05:00
Andrew F. Davis
b3d2861eb2 spl: Remove overwrite of relocated malloc limit
spl_init on some boards is called after stack and heap relocation, on
some platforms spl_relocate_stack_gd is called to handle setting the
limit to its value CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN when simple
SPL malloc is enabled during relocation. spl_init should then not
re-assign the old pre-relocation limit when this is defined.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-28 14:04:34 -05:00
Andrew F. Davis
cf947da19a spl: Add some missing newlines
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2017-01-20 15:38:00 -05:00
Andrew F. Davis
5d28b930f2 spl: Remove inline ifdef check for EXT and FAT support
These files are only included for build by the make system
when CONFIG_SPL_{EXT,FAT}_SUPPORT is enabled, remove the unneed
checks for these in the source files.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-20 15:37:59 -05:00
Oded Gabbay
8c36e99f21 armv8: release slave cores from CPU_RELEASE_ADDR
When using ARMv8 with ARMV8_SPIN_TABLE=y, we want the slave cores to
wait on spin_table_cpu_release_addr, until the Linux kernel will "wake" them
by writing to that location. The address of spin_table_cpu_release_addr is
transferred to the kernel using the device tree that is updated by
spin_table_update_dt().

However, if we also use SPL, then the slave cores are stuck at
CPU_RELEASE_ADDR instead and as a result, never wake up.

This patch releases the slave cores by writing spl_image->entry_point to
CPU_RELEASE_ADDR location before the end of the SPL code
(at jump_to_image_no_args()).

That way, the slave cores will start to execute the u-boot and will get to
the spin-table code and wait on the correct address
(spin_table_cpu_release_addr).

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-14 16:47:10 -05:00
Stefan Agner
22802f4e3a spl: move RAM boot support in separate file
Add a new top-level config option so support booting an image stored
in RAM. This allows to move the RAM boot support into a sparate file
and having a single condition to compile that file.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-01-14 16:46:26 -05:00
Stefan Agner
f417d40fe2 Convert CONFIG_SPL_RAM_DEVICE to defconfig
This converts the following to Kconfig:
  CONFIG_SPL_RAM_DEVICE

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-01-14 16:46:26 -05:00
Tom Rini
7f73ca484f Kconfig: CONFIG_OF_PLATDATA doesn't really exist
There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename
the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-14 12:20:23 -05:00
Andre Przywara
11e1479b9e SPL: make struct spl_image 64-bit safe
Since entry_point and load_addr are addresses, they should be
represented as longs to cover the whole address space and to avoid
warning when compiling the SPL in 64-bit.
Also adjust debug prints to add the 'l' specifier, where needed.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-01-04 16:37:41 +01:00
Simon Glass
2acf35dbf7 spl: Drop announce_boot_device()
This task can be handled by inline code now. Drop this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:15 -05:00
Simon Glass
29d357d7bf spl: Pass the loader into spl_load_image()
Rather than have this function figure out the correct loader again, pass
it in as a parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:15 -05:00
Simon Glass
540bfe7daa spl: Move the loading code into its own function
Create a boot_from_devices() function to handle trying each device. This
helps to reduce the size of the already-large board_init_r() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:14 -05:00
Simon Glass
ebc4ef61d7 spl: Add a name to the SPL load-image methods
It is useful to name each method so that we can print out this name when
using the method. Currently this happens using a separate function. In
preparation for unifying this, add a name to each method.

The name is only available if we have libcommon support (i.e can use
printf()).

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09 08:40:13 -05:00
Michal Simek
1a92541d9c dm: spl: mmc: Fix EXT SPL support
The patch
"dm: spl: mmc: Support CONFIG_BLK in SPL MMC"
(sha1: 87bce4e5c0)
converted FAT part of spl_mmc_do_fs_boot() but forget to update also EXT
part by 's/&mmc->block_dev/mmc_get_blk_desc(mmc)/'.
This patch is fixing compilation error when CONFIG_SPL_EXT_SUPPORT
is enabled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-05 11:04:39 -05:00
Simon Glass
2f11cd9121 dm: core: Handle global_data moving in SPL
When CONFIG_SPL_STACK_R is enabled, and spl_init() is called before
board_init_r(), spl_relocate_stack_gd() will move global_data to a new
place in memory. This affects driver model since it uses a list for the
uclasses. Unless this is updated the list will become invalid. When
looking for a non-existent uclass, such as when adding a new one, the loop
in uclass_find() may continue forever, thus causing a hang.

Add a function to correct this rather obscure bug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-02 20:53:19 -07:00
Marek Vasut
09410c6572 SPL: mmc: Make spl_mmc_load_image available
Make the spl_mmc_load_image() available globally, so it can be
invoked directly by SPL on extremely space-constrained systems.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-01 14:06:41 +09:00
Marek Vasut
b5b838f1a7 mmc: Tinification of the mmc code
Add new configuration option CONFIG_MMC_TINY which strips away all
memory allocation within the MMC code and code for handling multiple
cards. This allows extremely space-constrained SPL code use the MMC
framework.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-01 13:51:57 +09:00
Max Krummenacher
c8d7647f63 spl: mmc: fix switch statement
If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case statement
at the end of the switch leading to a compile error.
Remove the offending case statement.

| common/spl/spl_mmc.c:339:7: error: label at end of compound statement

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Marek Vasut <marex@denx.de>
2016-11-29 16:33:03 +01:00
Stefan Agner
e94793c844 spl: add USB Gadget config option
Introduce USB Gadget config option. This allows to combine Makefile
entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-28 19:49:49 -05:00
Stefan Agner
5991703e88 spl: dfu: move DFU Kconfig to SPL Kconfig
The DFU Kconfig menu entries should be part of the SPL
Kconfig file. Also avoid using the top level Makefile by
moving the config dependent build artifacts to the driver/
and driver/usb/gadget/ Makfiles.

With that, DFU can be built again in SPL if
CONFIG_SPL_DFU_SUPPORT is enabled.

Fixes: 6ad6102246 ("usb:gadget: Disallow DFU in SPL for now")

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-28 19:49:49 -05:00
Stefan Agner
34ee947ac3 spl: add RAM boot device only if it is actually defined
Some devices (e.g. dra7xx) support loading to RAM using DFU without
having direct boot from RAM support. Make sure the linker list
does not contain BOOT_DEVICE_RAM if CONFIG_SPL_RAM_DEVICE is not
enabled.

Fixes: 98136b2f26 ("spl: Convert spl_ram_load_image() to use linker list")

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-28 19:49:49 -05:00
tomas.melin@vaisala.com
f069ded611 spl: remove redundant call to parse_image_header()
Image header was checked twice.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 15:10:31 -05:00
tomas.melin@vaisala.com
f72250e7e7 spl: add check for FIT-header when loading image
Add check for FDT_MAGIC, otherwise also legacy images will be loaded as
a FIT. With this check in place, the loader works correct both
with legacy and FIT images.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28 15:10:31 -05:00
Stefan Brüns
66a47ff2d8 ext4: Allow reading files with non-zero offset, clamp read len
Support was already implemented, but not hooked up. This fixes several
fails in the test cases.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-21 14:07:27 -05:00
Semen Protsenko
38fed8abe7 spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to Kconfig
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Fix sniper and kc1 migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-11-18 21:20:58 -05:00
Heiko Schocher
29d3bc793c spl: move SYS_OS_BASE to Kconfig
Move SYS_OS_BASE to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
[trini: Also migrate a4m2k]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-15 08:12:27 -04:00
Heiko Schocher
c20ae2ffaa spl: move SPL_OS_BOOT to Kconfig
Move SPL_OS_BOOT to Kconfig and cleanup existing
uses.

Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-14 21:11:33 -04:00
B, Ravi
d2d9bdfcf9 spl: saveenv: adding saveenv support in SPL
By default saveenv option is not supported for SPL. This patch
enable the support for save environment variable for SPL build.

Enable save environment support in SPL after setenv. By default
the saveenv option is not provided in SPL, but some boards need
this support in 'Falcon' boot, where SPL need to boot from
different images based on environment variable set by OS. For
example OS may set "reboot_image" environment variable to
"recovery" inorder to boot recovery image by SPL. The SPL read
"reboot_image" and act accordingly and change the reboot_image
to default mode using setenv and save the environemnt.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Simon Glass <sig@chromium.org>

change in v1:
	- dropped SUPPORT, use CONFIG_SPL_SAVEENV
	- updates the comments in mmc_private.h
2016-10-08 09:33:36 -04:00
Simon Glass
d32b2d1c61 spl: Make spl_boot_list a local variable
There is no need for this to be in the BSS region. By moving it we can delay
use of BSS in SPL. This is useful for machines where the BSS region is not
in writeable space. On 64-bit x86, SPL runs from SPI flash and it is easier
to eliminate BSS use than link SPL to run with BSS at a particular
cache-as-RAM (CAR) address.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:55 -04:00
Simon Glass
f4d7d8596f spl: Update spl_load_simple_fit() to take an spl_image param
Upda the SPL FIT code to use the spl_image parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:54 -04:00
Simon Glass
710e9ca579 spl: Update fat functions to take an spl_image parameter
Update the fat loader to avoid using the spl_image global variable.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:53 -04:00
Simon Glass
b4a6c2aae6 spl: Update ext functions to take an spl_image parameter
Update the ext loader to avoid using the spl_image global variable.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:53 -04:00
Simon Glass
2a2ee2ac35 spl: Pass spl_image as a parameter to load_image() methods
Rather than having a global variable, pass the spl_image as a parameter.
This avoids BSS use, and makes it clearer what the function is actually
doing.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:52 -04:00
Simon Glass
97d9df0a91 spl: Convert spl_board_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code. Update existing users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:50 -04:00
Simon Glass
7ec0389354 spl: Convert spl_net_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code. We need two variants - one for BOOT_DEVICE_CPGMAC and one for
BOOT_DEVICE_USBETH.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:08:18 -04:00
Simon Glass
139db7af4e spl: Convert spl_spi_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code. Also set up the sunxi function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:34 -04:00
Simon Glass
0a9b73a13e spl: spi: Move the generic SPI loader into common/spl
All the other SPL loaders are in this directory, so move the SPI one in
there too.

There are two board-specific SPI loaders (fsl and sunxi). These remain in
the drivers/mtd/spi directory, since they do not contain generic code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:33 -04:00
Simon Glass
7557147927 spl: Convert spl_sata_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:33 -04:00
Simon Glass
56df46351a spl: Convert spl_usb_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:07:29 -04:00
Simon Glass
dd6bf9025c spl: Convert spl_ymodem_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:59 -04:00
Simon Glass
548b3ee73c spl: Convert spl_nor_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:59 -04:00
Simon Glass
afa6e6c488 spl: Convert spl_onenand_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:58 -04:00
Simon Glass
d5c2b11ce4 spl: Convert spl_nand_load_image() to use linker list
Add a linker list declaration for this method and remove the explicit
switch() code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06 15:06:57 -04:00