Commit graph

791 commits

Author SHA1 Message Date
Simon Glass
8e6cc46178 dm: test: Add a test for the mmc uclass
Add a test to confirm that we can probe this device. Since there is no
MMC stack support in sandbox at present, this is as far as the test goes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
64ce0cad9e dm: test: Add a test for the ram uclass
Add a test to confirm that we can probe this device and get information on
the available RAM.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:32 -06:00
Simon Glass
201c29a2d6 dm: test: Add a test for the reset uclass
Add tests that confirm that the drivers work as expected, and we can walk
through the available reset types trying to reset the board.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:31 -06:00
Simon Glass
6a1c7cef14 dm: test: Add tests for the clk uclass
Add tests of each API call using a sandbox clock device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Simon Glass
c02790ce12 dm: test: Allow test names to leave out the dm_test_ prefix
All driver model tests have a dm_test_ prefix. Ignore it when matching a
test name. This makes it easier to run individual tests, like this:

   ./sandbox/u-boot -d ./sandbox/arch/sandbox/dts/test.dtb \
	-c "ut dm clk_periph"

We can use 'clk_periph' instead of 'dm_test_clk_periph'.

Also print a message if the requested test is not found.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:30 -06:00
Simon Glass
3b55d30f6f dm: pmic: Split output from function
The regulator_autoset() function mixes printf() output and PMIC adjustment
code. It provides a boolean to control the output. It is better to avoid
missing logic and output, and this permits a smaller SPL code size. So
split the output into a separate function.

Also rename the function to have a by_name() suffix, since we would like
to be able to pass a device when we know it, and thus avoid the name
search.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-07-21 17:39:26 -06:00
Simon Glass
304fbef156 dm: Move the tree/uclass dump code into its own file
In SPL it is sometimes useful to be able to obtain a dump of the current
driver model state. Since commands are not available, provide a way to
directly call the functions to output this information.

Adjust the existing commands to use these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:22 -06:00
Simon Glass
2bb02e4fe2 dm: pci: Allow PCI bus numbering aliases
Commit 9cc36a2 'dm: core: Add a flag to control sequence numbering' changed
the default uclass behaviour to not support bus numbering. This is incorrect
for PCI and that commit should have enabled the flag for PCI.

Enable it so that PCI buses can be found and the 'pci' command works again.
Also add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:34:47 -06:00
Joe Hershberger
b6227d3993 test: dm: Recover the driver model tree after tests
Put the driver model for the system back into a good state after
completing the DM testing.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:18 -04:00
Joe Hershberger
09129bec8e test: dm: eth: Handle failed test env cleanup
Make sure that the env gets cleaned up after a test fails so that other
tests aren't affected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-21 09:16:17 -04:00
Joe Hershberger
7cccc66af5 test: dm: Don't bail on all tests if one test fails
There's not much point in having a failure count if we always give up on
the first failure. Also stop clearing the entire state between tests.

Make sure that any failures are still passed out to the command line.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
feb3847250 test: Move the unit tests to their own menu
Make all unit tests selectable as a menu of test suites instead of just
sitting in the top-level menu individually.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
40441e0bd3 test: dm: Move the dm tests over to the ut command
Unify the command for running unit tests further by moving the "dm test"
command over to "ut dm".

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:17 -04:00
Joe Hershberger
e721b882e9 test: Generalize the unit test framework
Separate the ability to define tests and assert status of test functions
from the dm tests so they can be used more consistently throughout all
tests.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:16:16 -04:00
Joe Hershberger
73c2bbeea3 net: Apply default format rules to all ethaddr
Use a regular expression to apply the default formatting flags for all
ethaddr env vars.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-21 09:13:20 -04:00
Przemyslaw Marczak
f64000c302 test: dm: test.dts - move to sandbox dts directory
The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.

This doesn't allow for including of dtsi files and using
of C preprocessor routines in this dts file.

Since the mentioned script builds U-Boot before tests,
then moving the test.dts file into sandbox dts directory
is reasonable.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:59:07 -06:00
Przemyslaw Marczak
e8f339e0e8 test: dm: add sandbox PMIC framework tests
This change adds new file to sandbox driver model test environment.
The file is: test/dm/power.c, and it includes tests for PMIC framework,
which includes PMIC uclass and REGULATOR uclass.

All tests are based od Sandbox PMIC emulated device. Some test constants for
this device are defined in the header: include/power/sandbox_pmic.h

PMIC tests includes:
- pmic get - tests, that pmic_get() returns the requested device
- pmic I/O - tests I/O by writing and reading some values to PMIC's registers
             and then compares, that the write/read values are equal.

The regulator tests includes:
- Regulator get by devname/platname
- Voltage set/get
- Current set/get
- Enable set/get
- Mode set/get
- Autoset
- List autoset

For the regulator 'get' test, the returned device pointers are compared,
and their names are also compared to the requested one.
Every other test, first sets the given attribute and next try to get it.
The test pass, when the set/get values are equal.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
2015-05-14 19:58:34 -06:00
Simon Glass
4772511475 dm: rtc: Add tests for real-time clocks
Add some simple tests to verify that the RTC uclass works correctly in
U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:41 -06:00
Simon Glass
fbe07ba0f8 dm: test: dts: Sort the aliases in the test device tree file
Sort these aliases to avoid confusion as to what is present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-05 20:58:40 -06:00
Simon Glass
182bf92d19 dm: i2c: Add an explicit test mode to the sandbox I2C driver
At present this driver has a few test features. They are needed for running
the driver model unit tests but are confusing and unnecessary if using
sandbox at the command line. Add a flag to enable the test mode, and don't
enable it by default.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:19 -06:00
Joe Hershberger
172a31bf87 test: dm: eth: Skip timeouts on ping tests
Indicate to the emulated sandbox Ethernet driver when we expect a
timeout and tell it to leap forward.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-05 20:58:18 -06:00
Simon Glass
f9fd4558ea dm: test: Don't clear global_data in dm_test_uclass_before_ready()
We must not clear global_data even in tests, since the ram_buffer (which
is used by malloc()) will also be lost, and subsequent tests will fail.

Zero only the global_data fields that are required for the test to function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-22 11:15:36 -06:00
Przemyslaw Marczak
6e0c4880c8 dm: test: Add tests for get/find uclass's device by name
This commit introduces simple tests for functions:
- uclass_find_device_by_name()
- uclass_get_device_by_name()

Tests added by this commit:
- Test: dm_test_uclass_devices_find_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_find_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_find_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

- Test: dm_test_uclass_devices_get_by_name: for uclass id: UCLASS_TEST_FDT
 * get uclass's devices by uclass_get_first/next_device() each as 'testdev',
 * for each returned device, call: uclass_get_device_by_name(),
   with previously returned device's name as an argument ('testdev->name').
 * for the found device ('founddev') check if:
   * founddev != NULL
   * founddev is active
   * testdev == founddev
   * testdev->name == founddev->name (by strcmp)

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:16 -06:00
Przemyslaw Marczak
9e85f13ddc dm: test: Add tests for get/find uclass devices
This commit introduces simple tests for functions:
- uclass_find_first_device()
- uclass_find_next_device()
- uclass_first_device()
- uclass_next_device()

Tests added by this commit:
- Test: dm_test_uclass_devices_find:
  * call uclass_find_first_device(), then check if: (dev != NULL), (ret == 0)
  * for the rest devices, call uclass_find_next_device() and do the same check

- Test: dm_test_uclass_devices_get:
  * call uclass_first_device(), then check if:
    -- (dev != NULL), (ret == 0), device_active()
  * for the rest devices, call uclass_next_device() and do the same check

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Przemyslaw Marczak
754e71e850 dm: test: Add tests for device's uclass platform data
This test introduces new test structure type:dm_test_perdev_uc_pdata.
The structure consists of three int values only. For the test purposes,
three pattern values are defined by enum, starting with TEST_UC_PDATA_INTVAL1.

This commit adds two test cases for uclass platform data:
- Test: dm_test_autobind_uclass_pdata_alloc - this tests if:
  * uclass driver sets: .per_device_platdata_auto_alloc_size field
  * the devices's: dev->uclass_platdata is non-NULL

- Test: dm_test_autobind_uclass_pdata_valid - this tests:
  * if the devices's: dev->uclass_platdata is non-NULL
  * the structure of type 'dm_test_perdev_uc_pdata' allocated at address
    pointed by dev->uclass_platdata. Each structure field, should be equal
    to proper pattern data, starting from .intval1 == TEST_UC_PDATA_INTVAL1.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-22 11:03:14 -06:00
Joe Hershberger
bc0571fc10 net: cosmetic: Fix checkpatch.pl failures in net.c
Finish eliminating CamelCase from net.c and other failures

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:35 -06:00
Joe Hershberger
049a95a775 net: cosmetic: Change IPaddr_t to struct in_addr
This patch is simply clean-up to make the IPv4 type that is used match
what Linux uses. It also attempts to move all variables that are IP
addresses use good naming instead of CamelCase. No functional change.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:32 -06:00
Simon Glass
e00cb2232b dm: usb: Add tests for the USB uclass
This adds a simple test for probing and a functional test using the flash
stick emulator, which tests a large chunk of the USB stack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
57f54d55bd dm: test: Allow 'dm test' to select a particular test to run
As well as running all tests, it is useful to be able to run a selected test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
b66c0a662b dm: test: Correct printf() output nit in 'dm uclass'
Neither the hyphen nor the equals sign is needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:30 -06:00
Simon Glass
206d4d2b4b dm: core: Mark device as active before calling uclass probe() methods
The uclass pre-probe functions may end up calling back into the device in
some circumstances. This can fail if recursion takes place. Adjust the
ordering so that we mark the device as active early, then retract this
later if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:19 -06:00
Simon Glass
e23eb614a4 dm: test: bus: Use a local variable to simplify code
Adjust this test to avoid repeating the same code too often.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:19 -06:00
Joe Hershberger
60304592b9 net: Improve error handling
Take a pass at plumbing errors through to the users of the network stack

Currently only the start() function errors will be returned from
NetLoop(). recv() tends not to have errors, so that is likely not worth
adding. send() certainly can return errors, but this patch does not
attempt to plumb them yet. halt() is not expected to error.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:14 -06:00
Joe Hershberger
7ece1c61ad test: dm: net: Add a test of the netretry behavior
The effect of the "netretry" env var was recently changed. This test
checks that behavior.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
7d104eab7d test: dm: eth: Add testing for ethrotate env var
Make sure that the ethrotate behavior occurs as expected.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
6536b9bb76 dm: eth: Add support for ethprime env var
The ethprime env var is used to indicate the starting device if none is
specified in ethact. Also support aliases specified in the ethprime var.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
e58780dcb7 dm: eth: Add support for aliases
Allow network devices to be referred to as "eth0" instead of
"eth@12345678" when specified in ethact.

Add tests to verify this behavior.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:13 -06:00
Joe Hershberger
bfacad7da1 test: dm: eth: Add tests for the eth dm implementation
Add a test for the eth uclass using the sandbox eth driver. Verify basic
functionality of the network stack / eth uclass by exercising the ping
function.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:12 -06:00
Joe Hershberger
0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Joe Hershberger
eb374221ec test: dm: Reorder the objects to build
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
d3b7ff14f4 dm: pci: Add driver model tests for PCI
Add some basic tests to check that things work as expected with sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00
Simon Glass
fa67f90fc3 dm: Show both allocated and requested seq numbers in 'dm uclass'
Both of these values are useful for understanding what is going on, so show
them both.

The requested number comes from a device tree alias. The allocated one is
set up when the device is activated, and is unique throughout the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
02c07b3741 dm: core: Add a uclass pre_probe() method for devices
Some uclasses want to set up a device before it is probed. Add a method
for this.

An example is with PCI, where a PCI uclass wants to set up its private
data for later use. This allows the device's uclass() method to make calls
whcih use that data (for example, read PCI memory regions from device
tree, set up bus numbers).

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
e564f054af dm: core: Add dev_get_uclass_priv() to access uclass private data
Add a convenience function to access the private data that a uclass stores
for each of its devices. Convert over most existing uses for consistency
and to provide an example for others.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-16 19:27:42 -06:00
Simon Glass
1967982a95 dm: test: Add a Kconfig file
Add a file to control driver model test features.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-12 10:35:34 -07:00
Simon Glass
ca88b9b939 dm: i2c: Add a dm_ prefix to driver model bus speed functions
As with i2c_read() and i2c_write(), add a dm_ prefix to the driver model
versions of these functions to avoid conflicts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-02-12 10:35:33 -07:00
Simon Glass
d0cff03e18 dm: spi: Move slave details to child platdata
At present we go through various contortions to store the SPI slave's chip
select in its private data. This only exists when the slave is active so
must be set up when it is probed. Until the device is probed we don't
actually know what chip select it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the chip select when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00
Simon Glass
83c7e434c9 dm: core: Allow uclass to set up a device's child before it is probed
Some buses need to set up their devices before they can be used. This setup
may well be common to all buses in a particular uclass. Support a common
pre-probe method for the uclass, called before any bus devices are probed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
081f2fcbd9 dm: core: Allow the uclass to set up a device's child after binding
For buses, after a child is bound, allow the uclass to perform some
processing. This can be used to figure out the address of the child (e.g.
the chip select for SPI slaves) so that it is ready to be probed.

This avoids bus drivers having to repeat the same process, which really
should be done by the uclass, since it is common.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:56 -07:00
Simon Glass
dac8db2ce6 dm: core: Allow uclasses to specify private data for a device's children
In many cases the per-child private data for a device's children is defined
by the uclass rather than the individual driver. For example, a SPI bus
needs to store information about each of its children, but all SPI drivers
store the same information. It makes sense to allow the uclass to define
this data.

If the driver provides a size value for its per-child private data, then use
it. Failng that, fall back to that provided by the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
9cc36a2b89 dm: core: Add a flag to control sequence numbering
At present we try to use the 'reg' property and device tree aliases to give
devices a sequence number. The 'reg' property is often actually a memory
address, so the sequence numbers thus-obtained are not useful. It would be
better if the devices were just sequentially numbered in that case. In fact
neither I2C nor SPI use this feature, so drop it.

Some devices need us to look up an alias to number them within the uclass.
Add a flag to control this, so it is not done unless it is needed.

Adjust the tests to test this new behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
b367053102 dm: core: Add a function to get a device's uclass ID
This is useful to check which uclass a device is in.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
0118ce7957 dm: core: Add a post_bind method for parents
Allow parent drivers to be called when a new child is bound to them. This
allows a bus to set up information it needs for that child.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:55 -07:00
Simon Glass
ba8da9dc43 dm: core: Allow uclasses to specify platdata for a device's children
In many cases the child platform data for a device's children is defined by
the uclass rather than the individual devices. For example, a SPI bus needs
to know the chip select and speed for each of its children. It makes sense
to allow this information to be defined the SPI uclass rather than each
individual driver.

If the device provides a size value for its child platdata, then use it.
Failng that, fall back to that provided by the uclass.

Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:55 -07:00
Simon Glass
cdc133bde9 dm: core: Allow parents to have platform data for their children
For buses it is common for parents to need to know the address of the child
on the bus, the bus speed to use for that child, and other information. This
can be provided in platform data attached to each child.

Add driver model support for this, including auto-allocation which can be
requested using a new property to specify the size of the data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
f8a85449ef dm: core: Allocate platform data when binding a device
When using allocated platform data, allocate it when we bind the device.
This makes it possible to fill in this information before the device is
probed.

This fits with the platform data model (when not using device tree),
since platform data exists at bind-time.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-29 17:09:54 -07:00
Simon Glass
22cc069160 dm: Don't run tests if U-Boot cannot be built
There is no point in running the tests if U-Boot cannot be built. Abort in
this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:54 -07:00
Simon Glass
25ab4b0303 dm: i2c: Provide an offset length parameter where needed
Rather than assuming that the chip offset length is 1, allow it to be
provided. This allows chips that don't use the default offset length to
be used (at present they are only supported by the command line 'i2c'
command which sets the offset length explicitly).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2015-01-29 17:09:53 -07:00
Simon Glass
f9a4c2da72 dm: i2c: Rename driver model I2C functions to permit compatibility
Add a dm_ prefix to driver model I2C functions so that we can keep the old
ones around.

This is a little unfortunate, but on reflection it is too difficult to
change the API. We can undo this rename when most boards and drivers are
converted to use driver model for I2C.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:53 -07:00
Simon Glass
3669e0e759 dm: gpio: Add better functions to request GPIOs
At present U-Boot sort-of supports the standard way of reading GPIOs from
device tree nodes, but the support is incomplete, a bit clunky and only
works for GPIO bindings where #gpio-cells is 2.

Add new functions to request GPIOs, taking full account of the device
tree binding. These permit requesting a GPIO with a simple call like:

   gpio_request_by_name(dev, "cd-gpios", 0, &desc, GPIOD_IS_IN);

This will request the GPIO, looking at the device's node which might be
this, for example:

   cd-gpios = <&gpio TEGRA_GPIO(B, 3) GPIO_ACTIVE_LOW>;

The GPIO will be set to input mode in this case and polarity will be
honoured by the GPIO calls.

It is also possible to request and free a list of GPIOs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:51 -07:00
Simon Glass
b5493d17bd sandbox: Correct ordering of 'sb save' commands
Prior to commit d455d87 there was an inconsistency between the position of
the 'address' parameter in 'sb load' and 'sb save'. This was corrected but
it broke some tests. Fix the tests and also the help for 'sb save'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-14 11:35:43 -05:00
Simon Glass
ecc2ed55ee dm: i2c: Add tests for I2C
Add some basic tests to check that the system works as expected.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2014-12-11 13:18:43 -07:00
Masahiro Yamada
a56642c7ba dm_test: improve the appearance shown by "dm tree" command
The command "dm tree" lists devices in a tree-like format.
This commit makes it look more like what the Unix command "tree"
shows.

=> dm tree
 Class       Probed   Name
----------------------------------------
 root        [ + ]    root_driver
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 demo        [   ]    |-- demo_simple_drv
 demo        [   ]    |-- demo_shape_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 test        [   ]    |-- test_drv
 gpio        [   ]    |-- gpio_sandbox
 serial      [   ]    |-- serial_sandbox
 serial      [ + ]    |-- serial
 demo        [   ]    |-- triangle
 demo        [   ]    |-- square
 demo        [   ]    |-- hexagon
 gpio        [   ]    |-- gpios
 spi         [   ]    |-- spi@0
 spi_emul    [   ]    |   `-- flash@0
 cros_ec     [ + ]    `-- cros-ec@0

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-11 13:18:41 -07:00
Simon Glass
4324174d03 test: dm: Add additional GPIO tests
Add tests for gpio_requestf() and for memory leaks.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
756ac0bb15 test: dm: Support memory leak checking as a core feature
Check the state of the malloc() heap before each test is run, so that tests
can verify that all is well at the end. Provide helper functions to mark
the heap and to check that it returns to its initial state.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:53 -06:00
Simon Glass
d44f597b12 dm: gpio: Add gpio_requestf() helper for printf() strings
Add a helper which permits a printf()-style format string for the requester
string.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
4b8f11c2cc test: dm: Update GPIO tests for new gpio_request() method
Now that gpio_request() is handled by the uclass, updates the tests
accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:29:52 -06:00
Simon Glass
0ae0cb7b50 dm: sf: Add tests for SPI flash
Add a simple test for SPI that uses SPI flash. It operates by creating a
SPI flash file and using the 'sf test' command to test that all
operations work correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:52 -06:00
Simon Glass
ebcab48a03 dm: spi: Add tests
These tests use SPI flash (and the sandbox emulation) to operate.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:51 -06:00
Simon Glass
a8981d4f80 dm: core: Add functions for iterating through device children
Buses need to iterate through their children in some situations. Add a few
functions to make this easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:45 -06:00
Simon Glass
a327dee0f4 dm: Add child_pre_probe() and child_post_remove() methods
Some devices (particularly bus devices) must track their children, knowing
when a new child is added so that it can be set up for communication on the
bus.

Add a child_pre_probe() method to provide this feature, and a corresponding
child_post_remove() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
e59f458de6 dm: Introduce per-child data for devices
Some device types can have child devices and want to store information
about them. For example a USB flash stick attached to a USB host
controller would likely use this space. The controller can hold
information about the USB state of each of its children.

The data is stored attached to the child device in the 'parent_priv'
member. It can be auto-allocated by dm when the child is probed. To
do this, add a per_child_auto_alloc_size value to the parent driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
997c87bb0b dm: Add functions to access a device's children
Devices can have childen that can be addressed by a simple index, the
sequence number or a device tree offset. Add functions to access a child
in each of these ways.

The index is typically used as a fallback when the sequence number is not
available. For example we may use a serial UART with sequence number 0 as
the console, but if no UART has sequence number 0, then we can fall back
to just using the first UART (index 0).

The device tree offset function is useful for buses, where they want to
locate one of their children. The device tree can be scanned to find the
offset of each child, and that offset can then find the device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:37 +01:00
Simon Glass
1ca7e2062b dm: Provide a function to scan child FDT nodes
At present only root nodes in the device tree are scanned for devices.
But some devices can have children. For example a SPI bus may have
several children for each of its chip selects.

Add a function which scans subnodes and binds devices for each one. This
can be used for the root node scan also, so change it.

A device can call this function in its bind() or probe() methods to bind
its children.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:08:36 +01:00
Simon Glass
c910e2e2da dm: Avoid accessing uclasses before they are ready
Don't allow access to uclasses before they have been initialised.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:26 +01:00
Simon Glass
f4cdead24a dm: Allow a device to be found by its FDT offset
Each device that was bound from a device tree has an node that caused it to
be bound. Add functions that find and return a device based on a device tree
offset.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
b7d665705e dm: Display the sequence number for each device
Add this information to 'dm tree' and 'dm uclass' commands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
5a66a8ff86 dm: Introduce device sequence numbering
In U-Boot it is pretty common to number devices from 0 and access them
on the command line using this numbering. While it may come to pass that
we will move away from this numbering, the possibility seems remote at
present.

Given that devices within a uclass will have an implied numbering, it
makes sense to build this into driver model as a core feature. The cost
is fairly small in terms of code and data space.

With each uclass having numbered devices we can ask for SPI port 0 or
serial port 1 and receive a single device.

Devices typically request a sequence number using aliases in the device
tree. These are resolved when the device is probed, to deal with conflicts.
Sequence numbers need not be sequential and holes are permitted.

At present there is no support for sequence numbers using static platform
data. It could easily be added to 'struct driver_info' if needed, but it
seems better to add features as we find a use for them, and the use of -1
to mean 'no sequence' makes the default value somewhat painful.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
4e8bc21170 dm: Avoid activating devices in 'dm uclass' command
This command currently activates devices as it lists them. This is not
desirable since it changes the system state. Fix it and avoid printing
a newline if there are no devices in a uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
fffa24d7c5 dm: Move device display into its own function
The device display for 'dm tree' and 'dm uclass' is mostly the same, so
move it into a common function.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:25 +01:00
Simon Glass
00606d7e39 dm: Allow drivers to be marked 'before relocation'
Driver model currently only operates after relocation is complete. In this
state U-Boot typically has a small amount of memory available. In adding
support for driver model prior to relocation we must try to use as little
memory as possible.

In addition, on some machines the memory has not be inited and/or the CPU
is not running at full speed or the data cache is off. These can reduce
execution performance, so the less initialisation that is done before
relocation the better.

An immediately-obvious improvement is to only initialise drivers which are
actually going to be used before relocation. On many boards the only such
driver is a serial UART, so this provides a very large potential benefit.

Allow drivers to mark themselves as 'pre-reloc' which means that they will
be initialised prior to relocation. This can be done either with a driver
flag or with a 'dm,pre-reloc' device tree property.

To support this, the various dm scanning function now take a 'pre_reloc_only'
parameter which indicates that only drivers marked pre-reloc should be
bound.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:24 +01:00
Simon Glass
7497812d47 dm: Make sure that the root device is probed
The root device should be probed just like any other device. The effect of
this is to mark the device as activated, so that it can be removed (along
with its children) if required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-07-23 14:07:24 +01:00
Simon Glass
eb9ef5fee7 dm: Use an explicit expect value in core tests
Rather than reusing the 'reg' property, use an explicit property for the
expected ping value used in testing.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-07-23 14:07:23 +01:00
Simon Glass
4af5b1445c dm: Use '*' to indicate a device is activated
Make both dm enumeration commands support showing whether a driver is active
or not, and use a consistent indicator (an asterisk).

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-06-21 10:12:43 -06:00
Simon Glass
184b1b7175 dm: Fix printf() strings in the 'dm' command
The values here are int, but the map_to_sysmem() call can return a long.
Add a cast to deal with this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:56:28 -06:00
Simon Glass
b6a49a7ae7 dm: Allow driver model tests only for sandbox
The GPIO tests require the sandbox GPIO driver, so cannot be run on other
platforms. Similarly for the 'dm test' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:52 -06:00
Simon Glass
ae7f451308 dm: Rename struct device_id to udevice_id
It is best to avoid having any occurence of 'struct device' in driver
model, so rename to achieve this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:55:18 -06:00
Heiko Schocher
54c5d08a09 dm: rename device struct to udevice
using UBI and DM together leads in compiler error, as
both define a "struct device", so rename "struct device"
in include/dm/device.h to "struct udevice", as we use
linux code (MTD/UBI/UBIFS some USB code,...) and cannot
change the linux "struct device"

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
2014-05-27 10:21:32 -04:00
Simon Glass
96495d90fe dm: Add GPIO support and tests
Add driver model support for GPIOs. Since existing GPIO drivers do not use
driver model, this feature must be enabled by CONFIG_DM_GPIO. After all
GPO drivers are converted over we can perhaps remove this config.

Tests are provided for the sandbox implementation, and are a sufficient
sanity check for basic operation.

The GPIO uclass understands the concept of named banks of GPIOs, with each
GPIO device providing a single bank. Within each bank the GPIOs are numbered
using an offset from 0 to n-1. For example a bank named 'b' with 20
offsets will provide GPIOs named b0 to b19.

Anonymous GPIO banks are also supported, and are just numbered without any
prefix.

Each time a GPIO driver is added to the uclass, the GPIOs are renumbered
accordinging, so there is always a global GPIO numbering order.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:30 -05:00
Simon Glass
0681195977 dm: Add a 'dm' command for testing
This command is not required for driver model operation, but can be useful
for testing. It provides simple dumps of internal data structures.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:29 -05:00
Simon Glass
2e7d35d2a6 dm: Add basic tests
Add some tests of driver model functionality. Coverage includes:

- basic init
- binding of drivers to devices using platform_data
- automatic probing of devices when referenced
- availability of platform data to devices
- lifecycle from bind to probe to remove to unbind
- renumbering within a uclass when devices are probed/removed
- calling driver-defined operations
- deactivation of drivers when removed
- memory leak across creation and destruction of drivers/uclasses
- uclass init/destroy methods
- automatic probe/remove of children/parents when needed

This function is enabled for sandbox, using CONFIG_DM_TEST.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-04 12:15:29 -05:00