4 commits

Author	SHA1	Message	Date
Michael Trimarchi	35461fe94e	imx: imx8mn_smm_s2/s2pro: Enable TrustZone ... When the board was added, enabling tzc380 was left off by mistake. The optee was tested with the following configuration in s2pro + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 6MiB */ + optee_core@5f800000 { + reg = <0x00 0x5f800000 0x00 0x600000>; + }; + + /* 2MiB */ + optee_shm@5fe00000 { + reg = <0x00 0x5fe00000 0x00 0x200000>; + }; + }; + Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>	2022-05-20 12:36:48 +02:00
Peng Fan	09bf8270cf	imx: imx8mn_smm_s2: clean up board watchdog code ... pinctrl_wdog already marked u-boot,dm-spl, so clean up board code. The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>	2022-05-20 09:30:29 +02:00
Michael Trimarchi	0016e62813	board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIAL ... Enable DM_SERIAL for both U_Boot and the SPL. The uart4 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_init() to avoid a board hang as dm can't be used until after spl_init(). Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>	2022-04-21 15:18:25 +02:00
Ariel D'Alessandro	6c317fedc7	bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards ... Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512MiB Nand - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - USBOTG1 peripheral - fastboot. - 100Mbit Ethernet Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>	2022-04-12 19:10:44 +02:00