Commit graph

26168 commits

Author SHA1 Message Date
Simon Glass
e4d761000a Exynos: Use 900MHz ARM frequency in SPL for peach_pit
The device seems to hang in SPL if the full speed is used when booting from
USB, perhaps because the PMIC has not been set to the maximum ARM core
voltage yet. Slow it down to a reliable speed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 17:25:46 +09:00
Tom Rini
dd0204e48d Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-10-07 07:38:39 -04:00
Anthony Felice
c19a8bc571 vf610twr: Tune DDR initialization settings
Removed settings in unsupported register fields. They didn’t
do anything, and in most cases, were not documented in the
reference manual.

Changed register settings to comply with JEDEC required values.

Changed timing parameters because they included full clock
periods that were doing nothing.

Signed-off-by: Anthony Felice <tony.felice@timesys.com>
[rebased on v2014.10-rc2]
Signed-off-by: Stefan Agner <stefan@agner.ch>
2014-10-07 13:08:31 +02:00
Minkyu Kang
3cc83f9d08 Merge branch 'uboot' 2014-10-07 19:14:03 +09:00
Minkyu Kang
64f41212d8 Merge branch 'master' of http://git.denx.de/u-boot-samsung 2014-10-07 19:13:52 +09:00
Albert ARIBAUD
1454ba8e56 Merge branch 'u-boot-marvell/master' into 'u-boot-arm/master' 2014-10-07 12:11:32 +02:00
Tom Rini
742de9076e Prepare v2014.10-rc3
Signed-off-by: Tom Rini <trini@ti.com>
2014-10-06 20:23:09 -04:00
Tom Rini
8a6b088aff Merge branch 'master' of git://git.denx.de/u-boot-usb 2014-10-06 15:49:50 -04:00
Tom Rini
04de09f89b Merge branch 'topic/arm/socfpga-20141006' of git://git.denx.de/u-boot-socfpga
Fix a trivial conflict in dw_mmc.c after talking with Marek.

Conflicts:
	drivers/mmc/dw_mmc.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-10-06 15:17:13 -04:00
Eric Nelson
e2140588dd usb: gadget: fastboot: terminate commands with NULL
Without NULL termination, various commands will read past the
end of input. In particular, this was noticed with error()
calls in cb_getvar and simple_strtoul() in cb_download.

Since the download callback happens elsewhere, the 4k buffer
should always be sufficient to handle command arguments.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 21:07:44 +02:00
Daniel Mack
16b61d13ba usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host mode
This bit allows the MUSB controller to negotiate for high-speed mode when
the device is reset by the hub. If unset, Babble errors occur with
high-speed mass storage devices right after the first packet. This condition
is not caught by the interrupt handles in U-Boot, so no recovery is done,
and the USB communication is stuck.

To fix this, set the bit unconditionally, not only for
CONFIG_USB_GADGET_DUALSPEED but also for host-only modes.

Signed-off-by: Daniel Mack <zonque@gmail.com>
2014-10-06 21:04:44 +02:00
Kevin Mihelich
5e3a388cdd nitrogen6x: config: enable EXT4 filesystem
Support reading/writing ext4 partitions.

Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
e9feee6370 nitrogen6x: config: enable Android fastboot
Enable 'fastboot' command.

This is currently enabled but not yet functional. Including it in the
configuration will ease further testing and development as discussed
on the mailing list.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
c0e7bd6661 nitrogen6x: config: add gpio command
Enable the 'gpio' command to allow reading and toggling of GPIO
pins.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
54950e8215 nitrogen6x: config: disable logo
Some users (QNX and Windows CE users in particular) have asked
to disable the Penguin shown on the display at boot time.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2014-10-06 17:57:23 +02:00
Troy Kisky
3f5d964ea0 nitrogen6x: config: allow more bootargs parameters
Increase the maximum number of arguments allowed by the Hush parser.
This prevents errors when users or scripts aren't quoting parameters
when setting the "bootargs" variable et al.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
5dbdc3cf3c nitrogen6x: config: enable "i2c edid"
Enable the "i2c edid" command to query data from an attached
HDMI monitor.

Usage is typically this:

        U-Boot > i2c dev 1
        U-Boot > i2c edid 0x50
        ...

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
d3d70e6f9b nitrogen6x: config: add CONFIG_CMD_MEMTEST
Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
c36c000828 nitrogen6x: config: enable USB keyboard support
Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
8d97b3ad95 nitrogen6x: config: expose SATA, then MMC over USB
If no boot script was found, expose internal storage over the
USB mass storage gadget to allow easy programming.

This is especially useful when SD cards are inaccessible or when
loading SATA drives.

More details are available in this blog post:
        http://boundarydevices.com/u-boot-usb-mass-storage-gadget/

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:23 +02:00
Eric Nelson
8145ccc3be nitrogen6x: config: add initrd_high
Support RAM disks by setting initrd_high. See commit 7e9603e

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Kevin Mihelich
43a3431c26 nitrogen6x: config: use FS_GENERIC load command
Remove the individual attempts to load using ext2 and fat, replace with the
generic load command supporting available filesystem types.

Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
2014-10-06 17:57:22 +02:00
Diego Rondini
5b7103e0af nitrogen6x: config: allow boot to USB stick
This patch enables boot to USB storage devices by expanding on the list
of boot devices.

Because the USB startup currently takes a long time, it places USB at
the end of the list of supported devices.

You can over-ride the boot order using the bootdevs environment variable.
For instance, this will make USB the first (highest priority) device:

	U-Boot > setenv bootdevs usb mmc sata
	U-Boot > saveenv

Signed-off-by: Diego Rondini <diego.rondini@kynetics.it>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
84e2dc0c89 nitrogen6x: config: add USB Mass Storage (ums) support
Add support for the USB mass storage to enable access to on-board
storage (especially eMMC and SATA).

Details at:
        http://boundarydevices.com/u-boot-usb-mass-storage-gadget/

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
ce9507b793 nitrogen6x: display use I2C detect for HDMI
The HPD pin and RX_SENSE registers have proven to be less reliable
than using I2C on the EDID pins for detection of an HDMI monitor.
In particular, when the HDMI output is reset through a "reboot"
cycle, the detect_hdmi() routine often bounces, resulting in
a failure to detect a connected monitor.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
c745de7174 nitrogen6x: display: add wvga-lvds panel
Add support for WVGA (800x480) panels using VESA GTF timings over
LVDS.

No auto-detection is supported, so you must configure this panel
manually through the 'panel' environment variable:

        U-Boot > setenv panel svga
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
865aa30bb3 nitrogen6x: display: add Ampire 1024x600 panel
Add support for an Ampire 1024x600 LVDS panel with integrated Ilitek
capacitive touch screen.

Auto-detection is enabled, so no explicit configuration is needed.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
135663061f nitrogen6x: display: add svga display (800x600)
Add support for 800x600 18-bit RGB displays using VESA GTF timings.

No auto-detection is supported, so you must configure this panel
manually through the 'panel' environment variable:

        U-Boot > setenv panel svga
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
04edda266d nitrogen6x: display: add support for fusion 7 display
Add support for the Touch Revolution Fusion7 display: 800x480 RGB
with a custom F0710A resistive touch controller.

Auto-detection of this panel is supported so no configuration is
required.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
d6949e3f9d nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays
This patch adds support for LVDS WXGA displays that use the SPWG encoding
standard instead of JEIDA.

No auto-detection is enabled and you must explicitly set the 'panel'
environment variable:

        U-Boot > setenv panel LDB-WXGA-S
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:22 +02:00
Eric Nelson
4adc1127f8 nitrogen6x: display: add support for LG-9.7 LVDS display
Add support for LG 9.7" LVDS panel (1024x768) with integrated eGalax
touch screen.

Note that this panel differs only slightly from the Hannstar XGA panel
(margins).

No auto-detection is available because it shares the same touch controller
as the Hannstar-XGA display, so you'll need to configure it through the
'panel' environment variable:

        U-Boot > setenv panel LG-9.7
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Eric Nelson
443d4d15d7 nitrogen6x: display: add qvga panel
Add support for a 1/4 VGA panel with a 24-bit RGB interface.
No auto-detection is enabled, so you must configure the 'panel'
environment variable to use this display:

        U-Boot > setenv panel qvga
        U-Boot > saveenv && reset

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Robert Winkler
4328fb05bf nitrogen6x: display: add support lvds jeida screen
Add support for Boundary Devices 7" and 10.1" 1280x800 displays with
integrated FocalTech ft5x06 10-point touch controller.

Because they share the touch controller with the 1024x600 displays,
auto-detection is disabled and you must explicitly set the 'panel'
environment variable:

        U-Boot > setenv panel LDB-WXGA
        U-Boot > saveenv && reset

Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Eric Nelson
84caf0b26b nitrogen6x: prevent warnings about board_ehci* callbacks
Include declarations of board_ehci callbacks to prevent compiler warnings
and enforce function prototypes.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Troy Kisky
adc4a2bd03 nitrogen6x: phy: add 100 us delay after phy reset
Testing shows that the Micrel PHY may not be completely out
of reset if accessed immediately.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Eric Nelson
9fc425278b nitrogen6x: staticize board file
Declare locally-used data structures and functions as
static and pull in header files to prevent compiler warnings
of "Should it be static?" when building with "make C=1".

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Troy Kisky
693cccf412 nitrogen6x: configure SGTL5000, CSI camera clock outputs
Configure CLKO outputs for SGTL5000, CSI camera.

The sys_mclk output for the SGTL500 in particular prevents
Windows CE from properly driving audio.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Eric Nelson
a3b527a947 nitrogen6x: power-down miscellanous peripherals
Ensure that cameras and USB OTG power are in a stable (reset)
state at reset by configuring their pads and toggling GPIOs.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Eric Nelson
41612472b6 nitrogen6x: configure SD2 pads for SDIO on USDHC2
Pads SD2_CLK/CMD/DAT0-3 are connected to an SDIO WiFi device on
Nitrogen and unconnected on BD-SL-i.MX6 (sabre lite).

Configure them as SDIO pins to prevent them from being in a state
that confuses the WiFi part.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:21 +02:00
Troy Kisky
213e9e3348 nitrogen6x: simplify board_mmc_getcd
The same logic applies to both SD card slots, only with different
GPIOs and the code should make that easier to see.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2014-10-06 17:57:20 +02:00
Eric Nelson
c9c86bde3d nitrogen6x: implement board_cfb_skip() to disable text output
Several customers have asked to leave the display quiet during
boot, so allow the user to express this request by the presence
of environment variable "novideo".

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-10-06 17:57:20 +02:00
Marek Vasut
2f210639c4 arm: socfpga: Use CMD_FS_GENERIC
Enable and use the CONFIG_CMD_FS_GENERIC to avoid hard-coding the
filesystem type into the environment.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Pavel Machek
5095ee088d arm: socfpga: Split SoCFPGA configuration
Split the SoCFPGA configuration into SoC-specific part which is
common for all boards (socfpga_cyclone5_common.h) and a board
specific part. There is currently only one board, which is the
generic SoCFPGA board (socfpga_cyclone5.h), but there are more
to come.

This is necessary due to various features of the boards, which
unfortunatelly cannot be autodetected.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Marek Vasut
47f9b4e1f3 arm: socfpga: Clean up SoCFPGA configuration
Reorganize and cleanup the configuration file for SoCFPGA. There
is no functional change after this cleanup. This was necessary,
since the file was a wild mess and it was impossible to make sense
of it's content, let alone change something without breaking some
other thing. This patch puts the contents on par with regular U-Boot
standards.

Also remove unused preprocessor symbols CONFIG_SINGLE_BOOTOADER
and CONFIG_USE_IRQ, which is undefined by default. Finally, do
logical reordering of the defines in the file so it's much more
readable. The reordering was also necessary for the splitting
as the initial one was messy.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Marek Vasut
7249fafb1a arm: socfpga: Add command to control HPS-FPGA bridges
Add command to enable and disable the bridges between HPS and FPGA.

This patch does have a checkpatch issue with the assembler portion,
checkpatch correctly complains that there should be no whitespace
before quoted newline. I do not agree that fixing this specific
checkpatch issue will improve the readability, thus this one is not
addressed.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
2014-10-06 17:46:51 +02:00
Marek Vasut
4ab333b765 arm: socfpga: Move cache_enable to CPU code
Move icache_enable() and dcache_enable() function calls from
board code into the CPU code and into the enable_caches()
function. This is how the cache enabling code was designed
to work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Chin Liang See
97ce274d97 arm: socfpga: Enable SDMMC boot for SOCFPGA U-Boot
Enable the SDMMC boot as default boot for SOCFPGA U-Boot dev kit.
Enable the bootz command as zImage is used instead uImage.

Signed-off-by: Chin Liang See <clsee@altera.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Chin Liang See
ddcbed04a2 arm: socfpga: Enable DWMMC for SOCFPGA
Enable the DesignWare MMC controller driver support
for SOCFPGA Cyclone5 dev kit

Signed-off-by: Chin Liang See <clsee@altera.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Pavel Machek
13e81d45f8 arm: socfpga: nic301: Add NIC-301 configuration code
Add code which configures the AMBA NIC-301 and the SCU on the SoCFPGA .
The code sets the access permissions for the CPU to the AMBA slaves such
that the CPU can access them in both secure and non-secure mode.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:51 +02:00
Marek Vasut
60d804c2f3 arm: socfpga: pl310: Map SDRAM to 0x0
Configure the PL310 address filter to make sure DRAM is mapped to 0x0.
This code also configures the "remap" register of NIC-301 and sets the
required 'mpuzero' bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Acked-by: Pavel Machek <pavel@denx.de>
2014-10-06 17:46:50 +02:00