Commit graph

1595 commits

Author SHA1 Message Date
Ramon Fried
30b3241368 usb:ci_udc: don't overwrite configuration on pullup
change writel to writebits32 in ci_pullup() in order
to keep phy configuration in tact.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:37 -04:00
Ramon Fried
246670417c usb: ehci-msm: Add init_after_reset for CI_UDC
MSM uses the chipidea controller IP, however it requires
to reinit the phy after controller reset. in EHCI mode there's a
dedicated callback for it.
In device mode however there's no such callback.
Add implementaion of ci_init_after_reset() to implement the above
requirement in case CI_UDC driver is used.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:37 -04:00
Ramon Fried
816495299d usb:ci_udc: Introduce init_after_reset phy function
MSM variant of Chipidea must reinitalize the phy
after controller reset.
Introduce ci_init_after_reset() weak function that
can be used to achieve the above init.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:36 -04:00
Ramon Fried
0683b27ae3 ehci: msm: use init_type in probe
Change ehci_usb_probe() function to initialize the
USB according to the init_type provided.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:36 -04:00
Ramon Fried
0ac0b6eb6a ehci: msm: switch to generic PHY uclass
All the underlying USB PHY was handled in the ehci driver.
Use the generic phy API instead.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:36 -04:00
Ramon Fried
2df49234c6 ehci: msm: Add missing platdata
platdata_auto_alloc_size was not initialized in structure.
Caused null pointer dereference when configuring device as
gadget.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:35 -04:00
Ramon Fried
cd8c3aec7f ehci: Replace board_prepare_usb with board_usb_init
Use standard board_usb_init() instead of the specific board_prepare_usb.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30 13:00:35 -04:00
Patrice Chotard
5c349e179d usb: ehci-generic: Add vbus-supply regulator support
Add vbus-supply regulator support.
On some board vbus is not controlled by the phy but by
an external regulator.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-09-15 03:17:43 +02:00
Ley Foon Tan
88c34b8da6 usb: dwc2: Add reset ctrl to driver
Add code to reset all reset signals as in usb DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.

If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-08-29 03:10:30 +02:00
Marek Vasut
1335e7745f usb: ehci: Add PHY support to ehci-pci
Add support for operating a PHY attached to ehci-pci. There are
systems where the EHCI controller is internally wired to a PCI
bus and has a PHY connected to it as well, ie. the R-Car Gen2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:19 +02:00
Marek Vasut
b43cdf9b3f usb: ehci: Make the PHY handling generic
Pull out the EHCI PHY functions into the ehci-hcd.c to let other
EHCI drivers use them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-08-28 11:00:18 +02:00
Tom Rini
15fd1b7903 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-08-24 16:11:01 -04:00
Jagan Teki
12069bd046 usb: musb-new: Call musb_platform_exit from musb_stop
musb stop is musb core call during unregister or shutting down
gadget or host musb. For graceful exit add musb_platform_exit
on musb_stop so-that it can exit the musb platform driver as well.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
14b6a07cf7 usb: musb-new: sunxi: Add proper musb exit support
musb have platform ops to do proper graceful exit,
so add the exit call and move musb platform exit code
instead of keeping it in driver remove.
This make proper shutdown of musb where .remove will
call disable, exit serially via musb_stop.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
1034bcc26d musb-new: sunxi: Access ahb_reset0_cfg via ccm offset
reset0 is not available for sun4i, 5i and 7i so access
the reset0 offset from ccm via driver data for relevant
Allwinner SoC. this will eventually drop the existing
ifdef for SUN6I.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
622fd2b98c usb: musb-new: sunxi: Allocate struct phy in private
Allocate struct phy in private structure instead of allocating
locally and assign it to a pointer. This eventually fix miss
alignment phy which is used in another functions.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jagan Teki
8b8d59f323 usb: musb-new: Fix improper musb host pointer
When MUSB is operating in peripheral mode, probe registering
musb core using musb_register which intern return int value
for validation. so there is no scope to preserve struct musb
pointer but the same can be used in .remove musb_stop.
So fix this by return musb_register with struct musb pointer.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-23 17:31:24 +05:30
Jean-Jacques Hiblot
c73251eac1 usb: gadget: Add bcdDevice for the DWC3 USB Gadget Controller
Add an entry in usb_gadget_controller_number() for the DWC3 gadget
controller. Without it, it is not possible to bind the USB Ethernet driver.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-08-21 16:21:37 +02:00
Adam Ford
1a35526e1d usb: musb-new: omap2430: Enable DM_USB and OF support
With upcoming changes that require CONFIG_BLK, this broke
USB Mass Storage on the OMAP3 boards because if CONFIG_BLK is
enabled, it assumes that DM_USB is enabled, but it wasn't yet
available on omap3 and omap4 boards.

This patch converts the OMAP2430 MUSB glue to support DM_USB and
extracts the necessary information based on the device tree.

It's based on the ti-musb driver, but there are enough significant
differences in both the architecture and device tree entires between
am33xx and OMAP3/OMAP4, that I think it makes sense to continue to
keep the separate.

Per doc/driver-model/usb-info.txt, the USB gadget stuff hasn't
migrated to DM_USB yet, so this only supports USB Host for now.

Users wanting USB Gadgets will need to disable DM_USB and leave
it the old way for now.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-21 16:21:37 +02:00
Adam Ford
10d5ed9a54 usb: musb-new: omap2430: Remove dead code
A bunch of code was encapsulated in #ifdef's whether or not
it is building or for U-Boot.  Since this code is always building
for U-Boot, this patch removes the dead code.

Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-21 16:21:37 +02:00
Tom Rini
cdec3ea7e4 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-08-10 07:21:02 -04:00
Alberto Panizzo
92c7edae5e usb: rockchip: on K_FW_LBA_WRITE_10 remove magic block size of 512 bytes
As well as in K_FW_LBA_READ_10 and K_FW_LBA_ERASE_10 take device's
block size from f_rkusb->desc->blksz instead of the fixed 512 bytes.

Keep original behaviour of retry probing assigned block device on
every host request to manage late SDCard plugs.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:08 +02:00
Alberto Panizzo
4f6dc4c893 usb: rockchip: fix printing csw debug info
Workstation tool was happy while console on device were printing
random numbers..

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
11758a56ab usb: rockchip: be quiet on serial port while transferring data
While downloading or uploading megabytes of data we had thousands of
printf in console like:

transfer 0x10000 bytes done
OR
Uploading 0x1000 bytes

This because transfers are chunked and there is no way on target
side to know the overall transfer size (to print one string per
overall transfer).

All these prints on serial console do slow down significantly the
transfer and does not offer a significant information to the
developer: rkdeveloptool and Rockchip original tool do use small
chunks read/writes on big transfers. This allows on workstation
to print percentage of transfer complete and as well offers to
developer the information about: transfer is running OK.
On error, either the percentage will stop or an error will be shown
on workstation console.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
f68c8e827c usb: rockchip: implement K_FW_LBA_ERASE_10 command
This command is part of the write partition sequence performed by
rkdeveloptool: one partition is first completely erased and
than wrote.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
e11f9166f3 usb: rockchip: implement K_FW_LBA_READ_10 command
This patch implement reading blocks form selected device with
LBA addressing.

Corresponding command on workstation is:
rkdeveloptool rl <start_blk> <blk_cnt> <file>

While we support reading more than one blocks per K_FW_LBA_READ_10
request, rkdeveloptool and original rockchip tool do perform
chunk reads limiting the maximum size per chunk far lower
than max int values.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
e4b34a7634 usb: rockchip: implement skeleton for K_FW_GET_CHIP_VER command
Chip Version is a string saved in BOOTROM address space Little Endian.

Ex for rk3288: 0x33323041 0x32303134 0x30383133 0x56323030
which brings:  320A20140813V200

Note that memory version do invert MSB/LSB so printing the char
buffer would show: A02341023180002V

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Alberto Panizzo
cad66e324d usb: rockchip: fix command failed on host side due to missing data
Two consecutive rockusb_tx_write without waiting for request complete
do results in transfer reset of first request and thus no or incomplete
data transfer. This because rockusb_tx_write do use just one USB request
to keep serialization.

So calls like:
rockusb_tx_write_str(emmc_id);
rockusb_tx_write_csw(cbw->tag, cbw->data_transfer_length, CSW_GOOD);

was succeeding only when DEBUG was defined because the time spent
printing debug info was enough for transfer to complete.

This patch fixes the issue adding a simple request complete handler
called rockusb_tx_write_csw to be set as complete handler of in_req
when sending back simple payload + CSW replies to commands.

This new handler will always send CSW_GOOD replies because in case
of error the command callback itself must send back an error CSW as
unique reply to command.

This patch fixes execution of:
$ rkdeveloptool rfi
when DEBUG is not defined.

Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com>
2018-08-08 22:22:07 +02:00
Seung-Woo Kim
c194bdf226 gadget: f_thor: fix hang-up with ctrl-c
After the commit 6aae84769a ("gadget: f_thor: Fix memory leaks of
usb request and its buffer"), there is hang-up with ctrl-c in some
udc. It is because req of out_ep is freed before out_ep is disabled.
Fix hang-up with ctrl-c by disabling ep before free req of the ep.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
2018-08-08 22:22:07 +02:00
Tom Rini
481ea2e39d mips: au1x00: Remove support for these SoCs
The only platform left for the AU1x00 SoCs was the pb1x00 platform, an
apparent clone of the dbau1x00 platform.  As pb1x00 had no listed
maintainer I am assuming that it is also orphaned.  Remove this platform
and then remove the unused SoC support.

Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-08-08 13:34:27 +02:00
Andre Przywara
0bc846a769 sunxi: A64: OHCI: prevent turning off shared USB clock
On the A64 the clock for the first USB controller is actually the parent
of the clock for the second controller, so turning them off in that order
makes the system hang.
Fix this by only turning off *both* clocks when the *last* OHCI controller
is brought down. This covers the case when only one controller is used.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2018-07-05 11:25:50 +02:00
Emmanuel Vadot
ff5d5cc233 usb: dwc2: Add brcm,bcm2708-usb compatible
When using CONFIG_OF_BOARD on rpi to use the dtb provided by the
RaspberryPi Fundation, the compatible string isn't the same, resulting
in not-functional usb from u-boot.

Signed-off-by: Oleksandr Tymoshenko <gonzo@FreeBSD.org>
Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
2018-07-05 11:25:49 +02:00
Jagan Teki
9c22aec410 usb: sunxi: Use proper reg_mask for clock gate, reset
Masking clock gate, reset register bits based on the
probed controller is proper only due to the assumption
that masking should start with 0 even thought the controller
has separate PHY or shared between OTG.

unfortunately these are fixed due to lack of separate
clock, reset drivers.

Say for example EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG)
so we need to start reg_mask 0 - 2.

This patch calculated the mask, based on the register base
so that we can get the proper bits to set with respect to
probed controller.

We even do this masking by using PHY index specifier from dt,
but dev_read_addr_size is failing for 64-bit boards.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-06-29 10:52:18 +02:00
Zeng Tao
11080bf6c7 usb: ohci: change the NUM_EDs from 8 to 32
For ohci, the maximam supported endpoint number is 32(in and out), and
now we have used (usb_pipeendpoint(pipe) << 1) to index the specified
endpoint descritor, usb_pipeendpoint(pipe) can reach 0xf, so we need
change the NUM_EDs from 8 to 32.

Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
2018-06-29 10:52:12 +02:00
Vasily Khoruzhick
ebbc23a049 usb: sunxi: ohci: make ohci_t the first member in private data
ohci-hcd casts priv_data pointer to (ohci_t *), thus it must be
the first member in private data struct.

Fixes 831cc98b1 ("usb: sunxi: Simplify ccm reg base code")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-29 10:52:07 +02:00
Andrew Thomas
af15946aa0 dwc2 USB controller hangs with lan78xx
This bug is the combination of dwc2 USB controller and lan78xx
USB ethernet controller, which is the combination in use on
the Raspberry Pi Model 3 B+.

When the host attempts to receive a packet, but a packet has not
arrived, the lan78xx controller responds by setting BIR
(Bulk-In Empty Response) to NAK. Unfortunately, this hangs
the USB controller and requires the USB controller to
be reset.

The fix proposed is to have the lan78xx controller respond
by setting BIR to ZLP.

Signed-off-by: Andrew Thomas <andrew.thomas@oracle.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2018-06-27 22:21:25 -04:00
Tom Rini
a715415bb5 Merge branch 'master' of git://git.denx.de/u-boot-usb 2018-06-16 00:07:37 -04:00
Vasily Khoruzhick
b9f34757db usb: sunxi: access ahb_reset0_cfg in CCM using its offset
struct sunxi_ccm_reg doesn't have ahb_reset0_cfg on sun4i and sun5i,
thus compilation fails with:

drivers/usb/host/ohci-sunxi.c:96:26: error: 'struct sunxi_ccm_reg' has
no member named 'ahb_reset0_cfg'

Access this reg using its offset to fix this issue.

Fixes commit 1ed9c1118 ("usb: sunxi: ehci: get rid of ifdefs")
and commit 56830cee3 ("usb: sunxi: ohci: get rid of ifdefs")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-14 12:57:19 +02:00
Tom Rini
66398944f5 Merge git://git.denx.de/u-boot-x86 2018-06-13 11:43:59 -04:00
Alexey Brodkin
f8c987f8f1 lib: Add hexdump
Often during debugging session it's very interesting to see
what data we were dealing with. For example what we write or read
to/from memory or peripherals.

This change introduces functions that allow to dump binary
data with one simple function invocation like:
------------------->8----------------
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
------------------->8----------------

which gives us the following:
------------------->8----------------
00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35  ....baudrate=115
00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e  200.bootargs=con
00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30  sole=ttyS3,11520
00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00  0n8.bootdelay=3.
00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00  bootfile=uImage.
00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39  fdtcontroladdr=9
00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72  ffb1ba0.loadaddr
00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65  =0x82000000.stde
00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32  rr=serial0@e0022
00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c  000.stdin=serial
000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75  0@e0022000.stdou
000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30  t=serial0@e00220
000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  00..............
...
------------------->8----------------

Source of hexdump.c was copied from Linux kernel v4.7-rc2.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Mario Six <mario.six@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Stefan Roese <sr@denx.de>
2018-06-13 07:49:12 -04:00
Vasily Khoruzhick
11bb62768d usb: sunxi: sun50i: enable OHCI0 clock when OHCI1 is in use
On A64 OHCI1 clock source is OHCI0 clock, so we need to enable OHCI0
clock when OHCI1 is in use.

Fixes commit dd3228170a ("usb: sunxi: Switch to use generic-phy")

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Vasily Khoruzhick
56830cee3a usb: sunxi: ohci: get rid of ifdefs
We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Vasily Khoruzhick
1ed9c11188 usb: sunxi: ehci: get rid of ifdefs
We can use compatibles instead.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
2018-06-13 07:33:42 +02:00
Bin Meng
9fddf6c7dd usb: xhci-pci: Fix compiler warning
This fixes the following compiler warning:

  "warning: cast from pointer to integer of different size
  [-Wpointer-to-int-cast]"

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-06-13 09:50:57 +08:00
Ramon Fried
948f32c856 bug.h: introduce WARN_ONCE
Add WARN_ONCE definition to allow single time notification
of warnings to the user.
Taken from Linux kernel (4.17) with slight changes
(Removed __section(.data.once))

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
[trini: Drop the musb and dwc3 compat versions]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-07 17:08:06 -04:00
Tom Rini
809e0e398a Merge branch 'master' of git://git.denx.de/u-boot-sunxi 2018-06-04 08:55:00 -04:00
Tom Rini
582d97b6d3 Xilinx changes for v2018.07 second pull
zynqmp:
 - Show reset reason
 - Remove emulation platform
 - Update pmufw version
 - Simplify mmc bootmode
 - Remove dc2 useless configuration file
 - Cleanup mini config
 - Defconfig syncup
 - zcu100, zcu104 and zcu111 dts fixes
 
 xilinx:
 - Use live-tree functions in some drivers
 - Add support for Avnet Minized and Antminer S9
 
 fpga:
 - Add secure bitstream loading support
 
 mmc:
 - Add hs200 mode support
 
 usb xhci:
 - Header fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlsRRy4ACgkQykllyylKDCEovgCdGWsr4XFQfDZxCEMmsg2vyJF2
 0egAnj6Td1k6yTzQPDXwCtExZJfS/vgl
 =QxUz
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.07 second pull

zynqmp:
- Show reset reason
- Remove emulation platform
- Update pmufw version
- Simplify mmc bootmode
- Remove dc2 useless configuration file
- Cleanup mini config
- Defconfig syncup
- zcu100, zcu104 and zcu111 dts fixes

xilinx:
- Use live-tree functions in some drivers
- Add support for Avnet Minized and Antminer S9

fpga:
- Add secure bitstream loading support

mmc:
- Add hs200 mode support

usb xhci:
- Header fix
2018-06-01 13:50:15 -04:00
Michal Simek
b168591c89 usb: xhci: zynqmp: Fix header location
There is no reason to specify header with full soc name.
Symlink is setup automatically (arch -> arch-zynqmp)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31 13:50:39 +02:00
Alex Kiernan
65c96757fe usb: fastboot: Convert USB f_fastboot to shared fastboot
Convert USB fastboot code to use shared fastboot protocol.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30 11:59:21 +02:00
Alex Kiernan
d1a119d4f0 fastboot: Rename public fb_ functions to fastboot_
Rename fb_mmc_flash_write/fb_mmc_erase/fb_nand_flash_write/fb_nand_erase to
fastboot_... as they form a public interface

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-30 11:59:21 +02:00