Commit graph

620 commits

Author SHA1 Message Date
roy zang
4c52783b3d General code modification for mpc7448hpc2 board support.
1. Add 7447A and 7448 processor support.
2. Add the following flags.

CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.

CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.

CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.

There is a design issue for tsi108/109 pci configure  read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-11-02 18:49:51 +08:00
Stefan Roese
fae684e898 [PATCH] omap925.c: Remove unused functions
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2006-10-28 17:13:12 +02:00
Jon Loeliger
ea08ff6e14 MPC86xx: Cleaned up unused and conditionally used local variables.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-27 17:46:10 +02:00
Wolfgang Denk
d38936cdae Fix "ar" flags in some Makefiles to allow for silent "make -s" 2006-10-27 11:55:21 +02:00
Stefan Roese
7ade0c634a Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
Patch by Stefan Roese, 24 Oct 2006
2006-10-24 18:13:43 +02:00
Wolfgang Denk
47a6989c10 Code cleanup 2006-10-24 15:32:57 +02:00
Wolfgang Denk
0ab292cbc1 Merge with /home/wd/git/u-boot/master 2006-10-24 15:17:59 +02:00
Wolfgang Denk
72a087e047 Add AT32AP CPU and AT32AP7000 SoC support
Patch by Haavard Skinnemoen, 06 Sep 2006

This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.

The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":

http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf

In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2006-10-24 14:27:35 +02:00
Wolfgang Denk
d67c14c0f4 Merge with http://www.jdl.com/software/u-boot-86xx.git 2006-10-20 23:52:58 +02:00
Jon Loeliger
3acb7727ce Merge branch 'i2c' 2006-10-20 15:54:48 -05:00
Jon Loeliger
2047672684 Converted all 85xx boards to use a common FSL I2C driver.
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
And removed hard i2c path from a few u-boot.lds scipts too.
Minor whitespace cleanups along the way.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-20 15:50:15 -05:00
Wolfgang Denk
ba999c531e Cleanup compile warnings. Prepare for release 1.1.5 2006-10-20 17:54:33 +02:00
Stefan Roese
43a2b0e76a Add board/cpu specific NAND chip select function to 440 NDFC
Based on idea and implementation from Jeff Mann
Patch by Stefan Roese, 20 Oct 2006
2006-10-20 15:17:55 +02:00
Wolfgang Denk
a0d3518460 Merge with /home/sr/git/u-boot/440epx-boot-msg 2006-10-20 12:02:47 +02:00
Jon Loeliger
d22200f020 Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-19 12:03:44 -05:00
Jon Loeliger
7237c033b0 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
in an effort to begin to unify the umpteen FSL I2C drivers that
are all otherwise very similar.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-10-19 11:34:11 -05:00
Jon Loeliger
13a7fcdf37 * Fix a bunch of compiler warnings for gcc 4.0
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-10-19 11:33:52 -05:00
Wolfgang Denk
82165a334b Merge with /home/tur/proj/051_uboot_linux_v38b/u-boot 2006-10-18 22:27:57 +02:00
Stefan Roese
edf0b54338 Make 4xx bootup message shorter on 440EPx/GRx platforms
Patch by Stefan Roese, 18 Oct 2006
2006-10-18 16:00:43 +02:00
Bartlomiej Sieka
4707fb50cc Preliminary patch adding support for the MarelV38B board. 2006-10-13 21:09:09 +02:00
Stefan Roese
d7762337cb * PPC405EP: Add support for board configuration of CPC0_PCI register
This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
Patch by Tolunay Orkun, 07 Apr 2006
2006-10-12 20:09:31 +02:00
Stefan Roese
e0a46554c3 * PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
- Add configuration of Open Drain GPIO Output selection
  - Add configuration of initial value of GPIO output pins
Patch by Tolunay Orkun, 07 Apr 2006
2006-10-12 20:09:27 +02:00
Jon Loeliger
daaba9859b Merge branch 'master' of http://www.denx.de/git/u-boot 2006-10-10 17:21:42 -05:00
Jon Loeliger
1fd5699a4a Coding style changes to remove local varible blocks
and reformat a bit nicer.
2006-10-10 17:19:03 -05:00
Jon Loeliger
7b382b7125 Fix whitespace issues. 2006-10-10 17:14:45 -05:00
Wolfgang Denk
2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s"
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09 01:02:05 +02:00
Wolfgang Denk
511d0c72b8 Coding style cleanup 2006-10-09 00:42:01 +02:00
Jon Loeliger
4bbd453783 Merge branch 'mpc86xx' 2006-09-29 09:34:35 -05:00
John Traill
f55df18187 Fix missing tCycle/modfreq calculation.
Signed-off-by: John Traill <john.traill@freescale.com>
2006-09-29 09:13:39 -05:00
Jon Loeliger
afbdc649f8 Modified makefile for new build mechanism.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-09-19 09:34:10 -05:00
Jon Loeliger
afa98843e4 Merge branch 'master' of http://www.denx.de/git/u-boot
Conflicts:

	board/stxxtc/Makefile
2006-09-19 08:51:24 -05:00
Jon Loeliger
b440d0ef72 Merge branch 'mpc86xx' 2006-09-14 08:41:07 -05:00
Jon Loeliger
d14ba6a798 Handle 86xx SVR values according to the new Reference Manual.
Both 8641 and 8641D have SVR == 0x8090, and are distinguished
by the byte in bits 16-23 instead.
Thanks to Jason Jin for noticing.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2006-09-14 08:40:36 -05:00
Stefan Roese
854bc8da75 Add support for AMCC Rainier PPX440GRx eval board
Patch by Stefan Roese, 13 Sep 2006
2006-09-13 13:56:49 +02:00
Wolfgang Denk
98e43917dc Merge with /home/m8/git/u-boot 2006-09-09 22:53:06 +02:00
Stefan Roese
2d658967e1 Fix build problem cpu/ppc4xx/ndfc.c
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 13:09:53 +02:00
Marian Balakowicz
5e09054af6 Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. 2006-09-07 12:12:20 +02:00
Stefan Roese
887e2ec9ec Add support for AMCC Sequoia PPC440EPx eval board
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
  in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
  please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
  in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
2006-09-07 11:51:23 +02:00
Wolfgang Denk
f60ba0d35e Fix build problems on sorcery board. 2006-09-04 02:01:27 +02:00
Wolfgang Denk
6741ae92f3 Merge with /home/m8/git/u-boot 2006-09-04 01:03:57 +02:00
Marian Balakowicz
f93286397e Add support for a saving build objects in a separate directory.
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
2006-09-01 19:49:50 +02:00
Detlev Zundel
43835aac48 Added interrupt handling capabilities for mpc5xxx processors.
Also added Linux like BUG() macros.
2006-09-01 11:59:23 +02:00
Wolfgang Denk
e8143e72e1 Add splashscreen support for MCC200 board. 2006-08-30 23:09:00 +02:00
Jon Loeliger
0855c50e65 Merge branch 'mpc86xx' 2006-08-29 12:36:53 -05:00
Jon Loeliger
9bff7a69a8 Remove trailing empty lines. 2006-08-29 11:05:09 -05:00
Jon Loeliger
42868896df Merge branch 'mpc86xx' 2006-08-29 09:49:09 -05:00
Jon Loeliger
cd6d73d5b8 Remove bogus msync and use volatile asm. 2006-08-29 09:48:49 -05:00
Stefan Roese
2b393b0f0a PCIe endpoint support for AMCC Yucca 440SPe board
Patch by Tirumala R Marri, 26 Aug 2006
2006-08-29 08:05:15 +02:00
Wolfgang Denk
16850919ff Code cleanup 2006-08-27 18:10:01 +02:00
Jon Loeliger
f1f33de332 Merge branch 'mpc86xx' 2006-08-22 12:26:51 -05:00