Commit graph

220 commits

Author SHA1 Message Date
Tom Rini
79df00fdb4 MAINTAINERS: Add missing boards and config entries
As part of my usual round of build testing, output about missing
MAINTAINERS information was not logged, and thus often overlooked.
Correct that mistake by ensuring that I log the output of
genboardscfg.py every time.  As part of that, address a number of
missing MAINTAINERS entires.  In the case of a missing file, I have put
the original submitter down.  In the rest of the cases I have added the
config (and sometimes relevant header file) to the existing set of file
globs.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-06 09:58:51 -05:00
Marek Vasut
3219c77e58 ARM: rmobile: Fixup ULCB CPLD support after PFC rework
The ULCB CPLD support was not updated during the PFC table rework,
fix up the GPIO numbers until the CPLD support is rewritten to a
proper DM capable and DT probing driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-10 08:22:47 +09:00
Marek Vasut
9c4c79f432 ARM: rmobile: Zap ad-hoc PFC and GPIO setup in board files
At long last, nuke all this ad-hoc setup in board files in favor of
letting PFC pinmux and GPIO drivers do the same job, but based on DT
description of the hardware rather than this board-file ugliness.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-28 06:54:06 +09:00
Marek Vasut
793afcde6c ARM: rmobile: Switch to DM PFC pinmux and GPIO driver
Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo
driver. This allows the drivers to obtain pinmux and GPIO configuration
from DT rather than hard-coding it in board files.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-28 06:54:06 +09:00
Marek Vasut
a09a5c88bf ARM: rmobile: Remove SCIF clock configuration from board files
The configuration is now fully performed by the SCIF and clk drivers,
so remove it from the board file.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-24 14:12:07 +09:00
Marek Vasut
08c8888253 ARM: rmobile: Remove AVB clock configuration from board files
The configuration is now fully performed by the AVB and clk drivers,
so remove it from the board file.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-24 14:12:07 +09:00
Marek Vasut
667d13fbfa ARM: rmobile: Remove SD clock configuration from board files
The configuration is now fully performed by the SD and clk drivers,
so remove it from the board file.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-24 14:12:07 +09:00
Marek Vasut
ef60323326 ARM: rmobile: Move HSUSB configuration to board on ULCB
In order to use ehci-generic driver, move the configuration of HSUSB
block into the board file. This configuration should not have been in
the Gen3 EHCI USB driver in the first place, so move it to the board
file until there is a proper infrastructure and driver for the HSUSB
block.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-12 19:07:22 +02:00
Marek Vasut
afb19d65d9 ARM: rmobile: Move HSUSB configuration to board on Salvator-X
In order to use ehci-generic driver, move the configuration of HSUSB
block into the board file. This configuration should not have been in
the Gen3 EHCI USB driver in the first place, so move it to the board
file until there is a proper infrastructure and driver for the HSUSB
block.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-12 19:07:21 +02:00
Marek Vasut
183f5fd3ca ARM: rmobile: Fix SD divider settings on Gen3
On RCar M3 and on RCar H3 newer than and not including ES1.0, the SD clock
must be divided by 4 rather than 2 because a hardware workaround present
only in the H3 ES1.0 has been removed from these chips. U-Boot currently
only supports M3 and H3 ES 2.0 and newer, so configure the SD pre-divider
to 4 to prevent SD instability.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-07 20:04:40 -04:00
Marek Vasut
8212f56347 ARM: rmobile: Drop board_mmc_init
The board_mmc_init() is no longer invoked when DM is used, so move
all the pinmux config into board_init() instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-05 07:51:39 +09:00
Marek Vasut
3158b6f606 ARM: rmobile: Replace CONFIG_RAVB with CONFIG_RENESAS_RAVB in boards
The configuration option name is the later, so replace usage of
CONFIG_RAVB in board files with CONFIG_RENESAS_RAVB , otherwise
the RAVB pinmux is not set and ethernet does not work.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-09-05 07:51:39 +09:00
Marek Vasut
6f38085492 ARM: rmobile: Remove SH SDHI probing from ULCB board
Drop the SH SDHI bit from the board since SD now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-26 07:04:49 +09:00
Marek Vasut
ddb39a075b ARM: rmobile: Remove SH SDHI probing from Salvator-X board
Drop the SH SDHI bit from the board since SD now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-26 07:04:49 +09:00
Marek Vasut
3f63551471 ARM: rmobile: Remove Serial SH probing from ULCB board
Drop the Serial SH bit from the board since UART now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-26 07:04:49 +09:00
Marek Vasut
1c30aea5b1 ARM: rmobile: Remove Serial SH probing from Salvator-X board
Drop the Serial SH bit from the board since UART now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-26 07:04:49 +09:00
Marek Vasut
75ba2bf99f ARM: rmobile: Remove RAVB probing from ULCB board
Drop the RAVB bit from the board since RAVB now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-26 07:04:49 +09:00
Marek Vasut
a88026c51d ARM: rmobile: Remove RAVB probing from Salvator-X board
Drop the RAVB bit from the board since RAVB now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-26 07:04:49 +09:00
Simon Glass
35affd7a2f env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()
Rename this function for consistency with env_get().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:30:44 -04:00
Simon Glass
fd1e959e91 env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()
Rename this function for consistency with env_set().

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:23:56 -04:00
Simon Glass
382bee57f1 env: Rename setenv() to env_set()
We are now using an env_ prefix for environment functions. Rename setenv()
for consistency. Also add function comments in common.h.

Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-16 08:22:18 -04:00
Marek Vasut
bd39050cb2 ARM: rmobile: ulcb: Add ULCB board support
Add initial support for the R8A7795 and R8A7796 based ULCB board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-03 03:50:03 +09:00
Marek Vasut
adf3057f37 ARM: rmobile: salvator-x: Add R8A7796 support
Add minor ifdeffery and default board config for the Salvator-XS board
with R8A7796 M3 SoC.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:28 +09:00
Marek Vasut
ad663de053 ARM: rmobile: salvator-x: Rename the defconfig to match the SoC
Rename the salvator-x_defconfig to r8a7795_salvator-x_defconfig in
preparation for the r8a7796 support on salvator-x board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:28 +09:00
Marek Vasut
8f284e660b ARM: rmobile: salvator-x: Count all DRAM in all slots
Instead of counting only the DRAM in the first slot, count
all the DRAM in all slots and report it accordingly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:27 +09:00
Marek Vasut
d1018f5f9f ARM: rmobile: salvator-x: Add USB support
Add support for the EHCI USB.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:27 +09:00
Marek Vasut
fe2e8ff955 ARM: rmobile: salvator-x: Add DVFS and PMIC support
Add support for rebooting the board using the ROHM BD9571MWV I2C PMIC,
but keep the CPU reboot option as a fallback.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:27 +09:00
Marek Vasut
90e53f8b45 ARM: rmobile: salvator-x: Add RAVB ethernet support
Add support for the AVB ethernet on the Salvator-X board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:27 +09:00
Marek Vasut
50fb0c451f ARM: rmobile: salvator-x: Add SD support
Add support for the SD card slots on the Salvator-X board.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:27 +09:00
Marek Vasut
8474681c3e ARM: rmobile: salvator-x: Adjust UART clock
The UART uses internal SCIF clock except on R8A7795 H3 WS1.0 .
Use the internal clock and ignore the early version of the chip.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:27 +09:00
Marek Vasut
60c48e42a0 ARM: rmobile: salvator-x: Zap redefined DECLARE_GLOBAL_DATA_PTR
The macro is used twice in the salvator-x board file, drop one.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:26 +09:00
Marek Vasut
ae7a74a620 ARM: rmobile: salvator-x: Use BIT() macro in board file
Cosmetic change, replace (1 << (n)) with BIT(n) .

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-05-22 04:38:26 +09:00
Simon Glass
eb5ba3aefd i2c: Drop use of CONFIG_I2C_HARD
This option is pretty old. It predates CONFIG_SYS_I2C which is itself
deprecated in favour of driver model. Disable it for all boards.

Also drop I2C options which depend on this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-15 06:17:09 +02:00
Masahiro Yamada
e856bdcfb4 flash: complete CONFIG_SYS_NO_FLASH move with renaming
We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is
not completed. Finish this work by the tool.

During this move, let's rename it to CONFIG_MTD_NOR_FLASH.
Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH"
than those of "#ifdef CONFIG_SYS_NO_FLASH".  Flipping the logic will
make the code more readable.  Besides, negative meaning symbols do
not fit in obj-$(CONFIG_...) style Makefiles.

This commit was created as follows:

[1] Edit "default n" to "default y" in the config entry in
    common/Kconfig.

[2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH"

[3] Rename the instances in defconfigs by the following:
  find . -path './configs/*_defconfig' | xargs sed -i \
  -e '/CONFIG_SYS_NO_FLASH=y/d' \
  -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/'

[4] Change the conditionals by the following:
  find . -name '*.[ch]' | xargs sed -i \
  -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \
  -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \
  -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \
  -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/'

[5] Modify the following manually
  - Rename the rest of instances
  - Remove the description from README
  - Create the new Kconfig entry in drivers/mtd/Kconfig
  - Remove the old Kconfig entry from common/Kconfig
  - Remove the garbage comments from include/configs/*.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-12 14:30:25 -05:00
Vladimir Zapolskiy
cdbb0cf8ec sh: add common dram_init() function for all boards
Generic board support assumes a different method of specifying
DRAM size on board, also it can be shared among all boards, notably
only sh7763rdp board has a custom legacy dram_init(), however
the difference is only in printing some additional information,
this feature can be removed.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:51 -05:00
Vladimir Zapolskiy
9ec4a67ef3 sh: place board lowlevel_init code in the beginning of .text
Reference lowlevel_init of all supported SH2A/SH3/SH4/SH4A boards
from a shared linker script, the lowlevel_init function will be called
by a relative address.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:47 -05:00
Vladimir Zapolskiy
3f8b5391ec sh4: use single u-boot linker script for all boards
Three supported SH4/SH4A boards with the bootloader image stored on
SPI flash have own flavour of a linker script, in turn they are equal
among each other. The only difference is that the text from
lowlevel_init.o is placed right after start.o, which makes sense.

Note that .bss section is not marked as NOLOAD, because for about
10 years this is a default option of a GNU linker, either the
attribute is found or not the resulting image file is the same.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-02 21:32:46 -05:00
Masahiro Yamada
1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>
Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-23 17:55:42 -04:00
Nobuhiro Iwamatsu
0f2765e84e ARM: rmobile: lager: Move rcar-gen2-common to rcar-common
To common use of rcar-gen2-common directory in the R-Car SoCs,
and change from rcar-gen2-common to rcar-common.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:36 +09:00
masakazu.mochizuki.wd@hitachi.com
d8fc402aa2 arm: rmobile: Fix HDMI output for BLANCHE board
This commit fixes HDMI output for BLANCHE board

Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
masakazu.mochizuki.wd@hitachi.com
6f107e4cf6 arm: rmobile: Add BLANCHE board support
BLANCHE is development board based on R-Car V2H SoC (R8A7792)

This commit supports the following periherals:
- SCIF, Ethernet, QSPI, MMC

Signed-off-by: Masakazu Mochizuki <masakazu.mochizuki.wd@hitachi.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Nobuhiro Iwamatsu
4ebaba55a4 ARM: rmobile: rcar-common: Fix warning of type difference
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Nobuhiro Iwamatsu
e525d34b47 ARM: rmobile: Add support salvator-x board
Salvator-x is an entry level development board based on
R-Car H3 SoC (R8A7795). This commit supports SCIF only.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Nobuhiro Iwamatsu
581183def6 ARM: rmobile: Add support R-Car Generation 3
This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Nobuhiro Iwamatsu
a7da6f8c3d ARM: rmobile: Move rcar-gen2-common to rcar-common
To common use of rcar-gen2-common directory in the R-Car SoCs, and change from
rcar-gen2-common to rcar-common.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:35 +09:00
Nobuhiro Iwamatsu
1cc95f6e1b ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-08-17 10:25:34 +09:00
Simon Glass
f41e6088eb sh: Fix build errors for generic board
This includes the following fixes:
- Define needed __init_end symbol - see initr_reloc_global_data()
- Drop SH-specific struct bd_info
- Add an empty relocate_code() function

This prevents build errors with generic board, but the code will still need
work. Perhaps this is a better alternative than deleting the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-27 15:39:51 -04:00
Bin Meng
b3ce90815c sh: sh7753evb: Fix build error
Currently buildman fails to build sh7753evb and reports the following:

  board/renesas/sh7753evb/built-in.o: In function 'init_gether_mdio':
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_ADDR_BASE'
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'PMB_DATA_BASE'
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_addr_val'
  board/renesas/sh7753evb/sh7753evb.c:94: undefined reference to 'mk_pmb_data_val'
  make: *** [u-boot] Error 1

The fix is to wrap any codes that access these macros with CONFIG_SH_32BIT.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-25 10:40:00 -05:00
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Vladimir Barinov
21871138b7 arm: rmobile: Add Stout board support
Stout is an entry level development board based on R-Car H2 SoC (R8A7790)

This commit supports the following peripherals:
- SCIFA, I2C, Ethernet, QSPI, SDHI0/2, CPLD

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2015-08-31 17:32:59 +09:00