Commit graph

181 commits

Author SHA1 Message Date
Guennadi Liakhovetski
40cb90ee2b net: make ARP timeout configurable
Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
to the boards get lost, which typically are ARP replies. By configuring
the timeout to a lower value we significantly improve the first network
transfer time on this board. The timeout is specified in milliseconds,
later internally it is converted to deciseconds, because it has to be
converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
different boards.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-04-28 22:23:21 -07:00
Wolfgang Denk
1aeed8d71a Coding Style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13 09:59:26 -07:00
Wolfgang Denk
a1b215e2a2 Merge branch 'master' of git://www.denx.de/git/u-boot-at91 2008-04-08 00:16:36 +02:00
Stelian Pop
0176d43e75 Add support for AT91SAM9260EK
Support for booting from internal DataFlash, external DataFlash card
or NAND flash is available.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:46:12 +02:00
Stelian Pop
a8a78f2d99 Move at91cap9 specific files to at91sam9 directory
AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:44:18 +02:00
Daniel Hellstrom
c2b7da5522 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
a debug link (EDCL). The GRETH core is documented in GRIP.pdf
available at www.gaisler.com.

If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
offloading etc.) can be determined by a bit in the control register.
The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-30 00:33:28 -04:00
Aras Vaichas
d9a2f416d6 DHCP request fix for Windows Server 2003
Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
delay before sending "DHCP Request" in net/bootp.c. Required to overcome
interoperability problems with Windows Server 200x DHCP server when U-Boot
client responds too fast for server to handle.

Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-03-30 00:09:49 -04:00
Stefan Roese
6bc113886d net: Print error message upon net usage when no ethernet-interface is found
This patch fixes a problem seen on PPC4xx boards, when no MAC address is
defined. Then no ethernet interface is available but a simple "tftp"
command will return without any error message which is quite confusing.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-05 00:18:49 +01:00
Peter Pearse
ae92069abe Merge branch '080116_at91cap9' of git://linux-arm.org/u-boot-armdev 2008-02-15 12:59:15 +00:00
Jean-Christophe PLAGNIOL-VILLARD
38cc09c55b TFTP: fix search of ':' in BootFile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-14 23:02:52 +01:00
Stelian Pop
20b197c6f2 AT91CAP9 support : build integration
Signed-off-by: Stelian Pop <stelian@popies.net>
2008-02-14 09:37:57 +00:00
Hiroshi Ito
fe891ecf4d NFS Timeout with large files.
Retry to send NFS packet before reaching timeout.

Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
2008-02-14 01:26:13 +01:00
Jean-Christophe PLAGNIOL-VILLARD
a93907c43f TFTP: add host ip addr support
allow to use a different server as set in serverip
add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
if not defined the max length will be at 128

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-05 00:41:55 +01:00
Wolfgang Denk
8d54477b9b Merge branch 'master' of git://www.denx.de/git/u-boot-avr32 2008-01-23 14:33:40 +01:00
Wolfgang Denk
e57ed96bac Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-01-23 14:23:13 +01:00
Haavard Skinnemoen
6b44394442 AVR32: ATNGW100 board support
Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-18 09:53:18 +01:00
TsiChungLiew
777d1abd97 ColdFire: Add MCF547x_8x FEC driver
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>
2008-01-17 14:59:42 -06:00
Matthias Fuchs
e169257732 net: add 'ethrotate' environment variable
[PATCH] net: add 'ethrotate' environment variable

This patch replaces the buildtime configuration option
CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
configuration veriable. See README.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-17 09:41:09 -05:00
David Saada
2465665b73 QE UEC: Extend number of supported UECs to 4
This patch extends the number of supported UECs to 4. Note that the
problem of QE thread resources exhaustion is resolved by setting the
correct number of QE threads according to Ethernet type (GBE or FE).

Signed-off-by: David Saada <david.saada@ecitele.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-15 23:08:58 -05:00
Ben Warren
422b1a0160 Fix Ethernet init() return codes
Change return values of init() functions in all Ethernet drivers to conform
to the following:

    >=0: Success
    <0:  Failure

All drivers going forward should return 0 on success.  Current drivers that
return 1 on success were left as-is to minimize changes.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-By: Timur Tabi <timur@freescale.com>
2008-01-10 01:06:02 +01:00
Joakim Tjernlund
ccf21c311e Add support CONFIG_UEC_ETH3 in MPC83xx
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2008-01-08 09:55:41 -06:00
Matthias Fuchs
8b0c5c1276 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
networking stack does not automatically switch to
another interface. This patch does not touch the default
behavior.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-03 22:54:00 -05:00
Upakul Barkakaty
505be87a65 NET: Proper return code handling in eth_init() function in file eth.c
This patch modifies the return code handling in the eth_init()
function, to be compatible with the handling of the return codes in
the other network stack files. It now returns a 0 on Success and -1 on
error.

Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-03 22:39:51 -05:00
Shinya Kuribayashi
5ca2d0953e net/eth.c: Fix env_enetaddr signed overflow
Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
warned as below:

  U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)

  DRAM:  256 MB
  Flash: 32 MB
  In:    serial
  Out:   serial
  Err:   serial
  Net:   NEC-Candy
  Warning: NEC-Candy MAC addresses don't match:
  Address in SROM is         00:00:4C:80:92:A2
  Address in environment is  FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21

This patch changes env_enetaddr type from `char' to `unsigned char'.

Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-03 22:37:13 -05:00
Rafal Jaworowski
f85b607105 Introduce new eth_receive routine
The purpose of this routine is receiving a single network frame, outside of
U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
U-Boot will let them utilise networking facilities. For sending a raw frame
the already existing eth_send() can be used.

The direct consumer of this routine is the newly introduced API layer for
external applications (enabled with CONFIG_API).

Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-01-03 21:36:50 -05:00
Grant Likely
f92edbd8a0 Merge branch 'origin' into kconfig-for-1.3.1 2007-11-20 08:19:56 -07:00
Jean-Christophe PLAGNIOL-VILLARD
079c2c4fa7 Fix warning differ in signedness in net/net.c and net/nfs.c 2007-11-18 01:29:38 +01:00
Grant Likely
efe33035ac Merge branch 'origin' into kconfig-for-1.3.1
Conflicts:

	drivers/Makefile
2007-11-16 21:01:19 -07:00
Grant Likely
f0037c56b0 Build: split COBJS value into multiple lines
This change is in preparation for condtitionial compile support in the
build system.  By spliting them all into seperate lines now, subsequent
patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
be less invasive and easier to review

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-11-15 11:05:18 -07:00
Roy Zang
1f103105a3 Implement general ULi 526x Ethernet driver support in U-boot
This patch implements general ULi 526x Ethernet driver.
Until now, it is the only native Ethernet port on
MPC8610HPCD board, but it could be used on other boards
with ULi 526x Ethernet port as well.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-06 10:26:39 -05:00
Wolfgang Denk
992742a5b0 Cleanup coding style; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-03 23:09:27 +01:00
Guennadi Liakhovetski
29c29c0267 Fix typo in nfs.c
An obvious typo. Originally fixed in linkstation u-boot port.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2007-11-03 22:07:48 +01:00
Justin Flammia
e5c794e491 DHCP Client Fix
This is a multi-part message in MIME format.

commit e6e505eae94ed721e123e177489291fc4544b7b8
Author: Justin Flammia <jflammia@savantav.com>
Date:   Mon Oct 29 17:19:03 2007 -0400

    Found a bug in the way the DHCP Request packet is built, where the IP address
    that is offered by the server is bound to prematurely. This patch is a fix of
    that bug where the IP address offered by the DHCP server is not used until
    after the DHCP ACK from the server is received.

Signed-off-by: Justin Flammia <jflammia@savantav.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-11-01 23:13:00 +01:00
Wolfgang Denk
135e19bc27 Avoid compiler warning.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-18 21:36:35 +02:00
Wolfgang Denk
f34024d4a3 Fix memory corruption problem on STX GP3 SSA Board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-12 00:48:57 +02:00
Wolfgang Denk
60174746c6 Fix TFTP OACK code for short packets.
The old code had a loop limit overflow bug which caused a semi-
infinite loop for small packets, because in "i<len-8", "i" was signed,
but "len" was unsigned, and "len-8" became a huge number for small
values of "len".

This is a workaround which replaces broken commit 8f1bc284.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-31 10:01:51 +02:00
Wolfgang Denk
ff13ac8c7b Backout commit 8f1bc284 as it causes TFTP to fail.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-30 14:42:15 +02:00
Grant Likely
8f1bc28408 tftp: don't implicity trust the format of recevied packets
The TFTP OACK code trusts that the incoming packet is formated as
ASCII text and can be processed by string functions. It also has a
loop limit overflow bug where if the packet length is less than 8, it
ends up looping over *all* of memory to find the 'blksize' string.

This patch solves the problem by forcing the packet to be null
terminated and using strstr() to search for the sub string.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-08-30 09:16:16 +02:00
stefano babic
ef8f207527 Fix: TFTP is not working on little endian systems
TFTP does not work anymore after multicast tftp
patch was applied on little endian systems.
This patch fix it.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-08-29 02:14:34 +02:00
John Rigby
81735b2568 Merge branch 'denx-coldfire' into coldfire-aug2007 2007-08-16 17:40:03 -06:00
Jon Loeliger
30b52df9e9 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
Remove a leftover in net/tftp.c while we're at it.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-15 20:52:49 +02:00
Stefan Roese
d61ea14885 Merge with git://www.denx.de/git/u-boot.git 2007-08-15 14:51:27 +02:00
Wolfgang Denk
85eb5caf6b Coding style cleanup; rebuild CHANGELOG 2007-08-14 09:47:27 +02:00
David Updegraff
53a5c424bf multicast tftp: RFC2090
Implemented IETF RFC2090, Multicast TFTP.  Initial implementation
on Realtek RTL8139 and Freescale TSEC.

Signed-off-by: David Updegraff <dave@cray.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-08-13 23:22:31 -04:00
Wilson Callan
5d110f0aa6 New CONFIG_BOOTP_SERVERIP option
Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
from the bootp server

Signed-off-by: Wilson Callan <wcallan@savantav.com>
Signed-off-by: Ben Warren <bwarren@qstreams.com>
2007-08-13 23:07:53 -04:00
Sergey Kubushyn
c74b2108e3 [ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 20:26:18 +02:00
Wolfgang Denk
f2c2a937d8 Merge with /home/wd/git/u-boot/custodian/u-boot-testing 2007-08-06 01:11:08 +02:00
Andy Fleming
6bf6f114dc Merge branch 'testing' into working
Conflicts:

	CHANGELOG
	fs/fat/fat.c
	include/configs/MPC8560ADS.h
	include/configs/pcs440ep.h
	net/eth.c
2007-08-03 02:23:23 -05:00
Rafal Jaworowski
8993e54b6f [ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:

- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
2007-07-27 14:43:59 +02:00
Stefan Roese
c7e8410e3c Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescale 2007-07-16 11:51:41 +02:00