Commit graph

91 commits

Author SHA1 Message Date
Ingo van Lil
3eb90bad65 Generic udelay() with watchdog support
According to the PPC reference implementation the udelay() function is
responsible for resetting the watchdog timer as frequently as needed.
Most other architectures do not meet that requirement, so long-running
operations might result in a watchdog reset.

This patch adds a generic udelay() function which takes care of
resetting the watchdog before calling an architecture-specific
__udelay().

Signed-off-by: Ingo van Lil <inguin@gmx.de>
2009-12-05 01:08:53 +01:00
Kumar Gala
d72871e138 arm: Remove -fno-strict-aliasing
-fno-strict-aliasing is hidding warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-04 22:15:53 +02:00
Wolfgang Denk
f772acf8a5 ARM: compiler options cleanup - improve tool chain support
For some time there have been repeated reports about build problems
with some ARM (cross) tool chains.  Especially issues about
(in)compatibility with the tool chain provided runtime support
library libgcc.a caused to add and support a private implementation
of such runtime support code in U-Boot.  A closer look at the code
indicated that some of these issues are actually home-made.  This
patch attempts to clean up some of the most obvious problems and make
building of U-Boot with different tool chains easier:

- Even though all ARM systems basicy used the same compiler options
  to select a specific ABI from the tool chain, the code for this was
  distributed over all cpu/*/config.mk files.  We move this one level
  up into lib_arm/config.mk instead.

- So far, we only checked if "-mapcs-32" was supported by the tool
  chain; if yes, this was used, if not, "-mabi=apcs-gnu" was
  selected, no matter if the tool chain actually understood this
  option.  There was no support for EABI conformant tool chains.
  This patch implements the following logic:

  1) If the tool chain supports
	"-mabi=aapcs-linux -mno-thumb-interwork"
     we use these options (EABI conformant tool chain).
  2) Otherwise, we check first if
	"-mapcs-32"
     is supported, and then check for
	"-mabi=apcs-gnu"
     If one test succeeds, we use the first found option.
  3) In case 2), we also test if "-mno-thumb-interwork", and use
     this if the test succeeds. [For "-mabi=aapcs-linux" we set
     "-mno-thumb-interwork" mandatorily.]

  This way we use a similar logic for the compile options as the
  Linux kernel does.

- Some EABI conformant tool chains cause external references to
  utility functions like raise(); such functions are provided in the
  new file lib_arm/eabi_compat.c

  Note that lib_arm/config.mk gets parsed several times, so we must
  make sure to add eabi_compat.o only once to the linker list.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Dirk Behme <dirk.behme@googlemail.com>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: Tom Rix <Tom.Rix@windriver.com>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Sergey Kubushyn <ksi@koi8.net>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Tested-by: Andrzej Wolski <awolski@poczta.fm>
Tested-by: Gaye Abdoulaye Walsimou <walsimou@walsimou.com>
Tested-by: Tom Rix <Tom.Rix@windriver.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-08-21 23:11:53 +02:00
Jean-Christophe PLAGNIOL-VILLARD
52cb4d4fb3 stdio/device: rework function naming convention
So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 00:27:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD
379be585eb pxa: move serial driver to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ad7e8aac69 arm: remove cpu_init
move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
c358d9c3f1 arm: unify interrupt init
all arm init the IRQ stack the same way
so unify it in lib_arm/interrupts.c and then call arch specific interrupt init

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
10a451cd57 arm: unify linker script
all arm boards except a few use the same cpu linker script
so move it to cpu/$(CPU)

that could be overwrite in following order
SOC
BOARD
via the corresponding config.mk

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b54384e3ba arm: timer and interrupt init rework
actually the timer init use the interrupt_init as init callback
which make the interrupt and timer implementation difficult to follow

so now rename it as int timer_init(void) and use interrupt_init for interrupt

btw also remane the corresponding file to the functionnality implemented

as ixp arch implement two timer - one based on interrupt - so all the timer
related code is moved to timer.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-12 20:39:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
ab29823151 arm: unify reset command
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-05 13:08:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
b3acb6cd40 arm: clean cache management
unify arm cache management except for non standard cache as ARM7TDMI

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-05 13:06:31 +02:00
Jean-Christophe PLAGNIOL-VILLARD
677e62f432 arm: update co-processor 15 access
import system.h from linux

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-05 13:02:43 +02:00
Jean-Christophe PLAGNIOL-VILLARD
a922fdb87a PXA: timer use do_div and simplify it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-09 12:01:32 +01:00
Jean-Christophe PLAGNIOL-VILLARD
b03d92e558 pxa: move mmc drivers to drivers/mmc
introduce new macro CONFIG_PXA_MMC to activate it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-20 03:47:50 +01:00
Tom Rix
9490f46564 ARM:PXA Remove redefinition of mmc_cid and mmc_csd.
These structures are defined in the common mmc.h

This was compile checked on cerf250.
2009-02-20 03:47:44 +01:00
Micha Kalfon
94a3312920 pxa: fixing get_timer to return time in miliseconds.
Fixing the get_timer function to return time in miliseconds instead of
ticks. Also fixed PXA boards to use the conventional value of 1000 for
CONFIG_SYS_HZ.

Signed-off-by: Micha Kalfon <smichak.uv@gmail.com>
2009-02-20 03:24:08 +01:00
Andy Fleming
1de97f9856 Eliminated arch-specific mmc header requirement
The current MMC infrastructure relies on the existence of an
arch-specific header file.  This isn't necessary, and a couple
drivers were forced to implement dummy files to meet this requirement.
Instead, we move the stuff in those header files into a more appropriate
place, and eliminate the stubs and the #include of asm/arch/mmc.h

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:41 -06:00
Andy Fleming
abb5466ccf Convert mmc_init to mmc_legacy_init
This is to get it out of the way of incoming MMC framework

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:40 -06:00
Andy Fleming
b2e2ed0233 Eliminate support for using MMC as memory
MMC cards are not memory, so we stop treating them that way.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2009-02-16 18:07:40 -06:00
Timur Tabi
ecf5f077c8 i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
All implementations of the functions i2c_reg_read() and
i2c_reg_write() are identical. We can save space and simplify the
code by converting these functions into inlines and putting them in
i2c.h.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-12-15 23:46:21 +01:00
Sergei Poselenov
0e0c862efe Remove compiler warning: target CPU does not support interworking
This warning is issued by modern ARM-EABI GCC on non-thumb targets.

Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2008-12-13 23:41:23 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Adrian Filipi
c455d07396 Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
2008-09-12 01:23:44 +02:00
Stefan Roese
f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0a5676befb Fix some more printf() format issues.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-13 16:55:00 +02:00
Marcel Ziswiler
6b760189d7 Fix build time warnings in function mmc_decode_csd()
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-07-13 15:06:52 +02:00
Marcel Ziswiler
dbab0691d2 Minor spelling fix in comment.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-07-10 00:49:37 +02:00
Haavard Skinnemoen
341188b9cc MMC: Consolidate MMC/SD command definitions
This moves the MMC and SD Card command definitions from
include/asm/arch/mmc.h into include/mmc.h. These definitions are
given by the MMC and SD Card standards, not by any particular
architecture.

There's a lot more room for consolidation in the MMC drivers which
I'm hoping to get done eventually, but this patch is a start.

Compile-tested for all avr32 boards as well as lpc2292sodimm and
lubbock. This should cover all three mmc drivers in the tree.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-28 22:40:15 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Jean-Christophe PLAGNIOL-VILLARD
27c38689d0 pxa: fix previous definition on cpu init
start.S:183:1: warning: "ICMR" redefined
In file included from start.S:33:
include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
start.S:187:1: warning: "RCSR" redefined
...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-03 20:56:22 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0937b8d869 pxa: fix assignment from incompatible pointer type
fix mmc_bread function prototype

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-02-17 16:03:56 +01:00
Andreas Engel
6d0943a6be ARM: cleanup duplicated exception handlingcode
Move duplicated exception handling code into lib_arm.

Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
2008-02-14 09:38:21 +00:00
stefano babic
c95219fae2 MMC for PXA 27X (resubmit)
MMC support for X_Scale PXA is broken and does not work.
Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
There were already some patches around the world but none of them was
merged into the official u-boot tree.

This patch makes order fixing this issue. Resubmit after code cleanup.

Applied and tested on PXA 270 (TrizepsIV module).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2008-02-03 23:58:21 +01:00
Wolfgang Denk
cc557950f7 Merge branch 'master' of git://www.denx.de/git/u-boot-usb 2008-01-09 22:41:02 +01:00
Marcel Ziswiler
10c7382bc5 fix various comments
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2008-01-09 21:50:47 +01:00
Markus Klotzbuecher
6a40ef62c4 Merge git://www.denx.de/git/u-boot
Conflicts:

	board/tqm5200/tqm5200.c
2008-01-09 13:57:10 +01:00
Wolfgang Denk
8412d814ce Fix compiler warnings for ARM systems.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-11-18 17:11:09 +01:00
Rodolfo Giometti
85ac988e86 PXA USB OHCI: "usb stop" implementation.
Some USB keys need to be switched off before loading the kernel
otherwise they can remain in an undefined status which prevents them
to be correctly recognized by the kernel.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2007-10-31 10:07:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD
e9d0d52799 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-24 00:29:14 +02:00
Jean-Christophe PLAGNIOL-VILLARD
9c4884f54d fix warning: no return statement in function returning non-void
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-24 00:29:06 +02:00
Marcel Ziswiler
2a4741d9a1 fix pxa255_idp board
The pxa255_idp being an old unmaintained board showed several issues:
1. CONFIG_INIT_CRITICAL was still defined.
2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
3. Symbol flash_addr was undeclared.
4. The boards lowlevel_init function was still called memsetup.
5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
6. Using -march=armv5 instead of -march=armv5te resulted in lots of
'target CPU does not support interworking' warnings on recent compilers.
7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
indexes rather than the register definitions from the pxa-regs header
file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
avoid any ambiguities.
8. There were several redefinition warnings concerning ICMR, OSMR3,
OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
9. The board configuration file was rather outdated.
10. The part header file defined the vendor, product and revision arrays
as unsigned chars instead of just chars in the block_dev_desc_t
structure.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2007-10-23 16:40:40 +02:00
Rodolfo Giometti
4d4a945e18 PXA USB OHCI: "usb stop" implementation.
Some USB keys need to be switched off before loading the kernel
otherwise they can remain in an undefined status which prevents them
to be correctly recognized by the kernel.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
2007-10-15 12:57:41 +02:00
Jean-Christophe PLAGNIOL-VILLARD
68f14f77ca Fix warning differ in signedness in cpu/pxa/mmc.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-10-13 23:57:25 +02:00
stefano babic
80172c6181 PXA270: Add support for multiple serial ports.
This patch adds support for multiple serial ports to the PXA target.
FFUART, BTUART and STUART are supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2007-09-07 01:04:59 +02:00
Markus Klotzbuecher
edf5851be6 USB: cleanup monahans usb support. Remove dead code.
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2007-04-03 14:27:08 +02:00
Rodolfo Giometti
ae00bb4b29 PXA: pxa27x USB OHCI support
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
2007-03-26 12:03:36 +02:00
Markus Klotzbuecher
f2b07ebd32 Merge with git://www.denx.de/git/u-boot.git#testing-USB 2007-03-23 09:52:17 +01:00
Grant Likely
eb867a7623 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
Block device read/write is anonymous data; there is no need to use a
typed pointer.  void * is fine.  Also add a hook for block_read functions

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 09:05:45 +01:00
Grant Likely
735dd97b1b [PATCH 1_4] Merge common get_dev() routines for block devices
Each of the filesystem drivers duplicate the get_dev routine.  This change
merges them into a single function in part.c

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 09:04:34 +01:00
Wolfgang Denk
83dc830b16 Merge with /home/mk/git/u-boot-generic_ohci#generic_ohci 2006-11-27 16:52:20 +01:00