Commit graph

265 commits

Author SHA1 Message Date
Simon Glass
4896f4acc8 x86: dts: Add SATA settings for link
Add the requires settings to enable SATA on link.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:01 -07:00
Simon Glass
05efc3961c x86: dts: Add LPC settings for link
Add some settings required to set up the LPC correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:01 -07:00
Simon Glass
b021e05535 x86: dts: Move PCI peripherals into a pci node
These peripherals should not be at the top level, since they exist inside
the PCI bus. We don't have a full device tree node for pci yet, but we
should at least put it at the right level.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:01 -07:00
Simon Glass
65dd74a674 x86: ivybridge: Implement SDRAM init
Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in
the board directory and the SDRAM SPD information in the device tree. This
also needs the Intel Management Engine (me.bin) to work. Binary blobs
everywhere: so far we have MRC, ME and microcode.

SDRAM init works by setting up various parameters and calling the MRC. This
in turn does some sort of magic to work out how much memory there is and
the timing parameters to use. It also sets up the DRAM controllers. When
the MRC returns, we use the information it provides to map out the
available memory in U-Boot.

U-Boot normally moves itself to the top of RAM. On x86 the RAM is not
generally contiguous, and anyway some RAM may be above 4GB which doesn't
work in 32-bit mode. So we relocate to the top of the largest block of
RAM we can find below 4GB. Memory above 4GB is accessible with special
functions (see physmem).

It would be possible to build U-Boot in 64-bit mode but this wouldn't
necessarily provide any more memory, since the largest block is often below
4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large
ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit
kernels directly so this does not pose a limitation in that area. Also there
are probably parts of U-Boot that will not work correctly in 64-bit mode.
The MRC is one.

There is some work remaining in this area. Since memory init is very slow
(over 500ms) it is possible to save the parameters in SPI flash to speed it
up next time. Suspend/resume support is not fully implemented, or at least
it is not efficient.

With this patch, link boots to a prompt.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:15 +01:00
Simon Glass
437c2b7cd0 x86: chromebook_link: Enable GPIO support
Enable GPIO support and provide the required GPIO setup information to
the driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:15 +01:00
Simon Glass
9c678e152a x86: dts: Add microcode updates for ivybridge CPU
Add two microcode updates that are provided for this CPU. The updates
have been converted to a device tree form.

Note: SPDX submission has been done. If this license is approved I will
convert the files to use SPDX.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:14 +01:00
Simon Glass
2b6051541b x86: ivybridge: Add early LPC init so that serial works
The PCH (Platform Controller Hub) includes an LPC (Low Pin Count) device
which provides a serial port. This is accessible on Chromebooks, so enable
it early in the boot process.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:12 +01:00
Simon Glass
8ef07571a0 x86: Add chromebook_link board
This board is a 'bare' version of the existing 'link 'board. It does not
require coreboot to run, but is intended to start directly from the reset
vector.

This initial commit has place holders for a wide range of features. These
will be added in follow-on patches and series. So far it cannot be booted
as there is no ROM image produced, but it does build without errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 07:34:11 +01:00
Simon Glass
e98a03ca68 dm: x86: Convert coreboot serial to use driver model
This makes use of the existing device tree node to use driver model
for the serial console.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:45:45 -06:00
Simon Glass
d1259c9f5f dm: x86: dts: Add additional info to the serial port node
Add more information so that U-Boot can find the address of the serial port.
Also fix the reg-shift value.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23 19:45:28 -06:00
Simon Glass
6ddc4fd822 x86: Add device tree information for Chrome OS EC
Add the required node describing how to find the EC on link.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22 21:50:32 -06:00
Simon Glass
5957ac2a9f Makefile: Support include files for .dts files
Linux supports this, and if we are to have compatible device tree files,
U-Boot should also.

Avoid giving the device tree files access to U-Boot's include/ directory.
Only include/dt-bindings is accessible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-06-20 11:55:03 -06:00
Masahiro Yamada
3284c8b8ca dts: generate multiple device tree blobs
It is convenient to have all device trees on the same SoC compiled.
It allows for later easy repackaging without the need to re-run
the make file.

  - Build device trees with the same SoC under arch/$(ARCH)/dts

  - Copy the one specified by CONFIG_DEFAULT_DEVICE_TREE or
    DEVICE_TREE=... to dts/dt.dtb

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:10:05 -05:00
Masahiro Yamada
5ab502cb89 dts: move device tree sources to arch/$(ARCH)/dts/
Unlike Linux Kernel, U-Boot historically had *.dts files under
board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/.

I think arch/$(ARCH)/dts dicretory is a better location
to store both *.dts and *.dtsi files.

For example, before this commit, board/xilinx/dts directory
had both Microblaze dts (microblaze-generic.dts) and
ARM dts (zynq-*.dts), which are totally unrelated.

This commit moves *.dts to arch/$(ARCH)/dts/ directories,
allowing us to describe nicely mutiple DTBs generation in the next commit.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:10:05 -05:00
Simon Glass
2712f08898 x86: fdt: Create basic .dtsi file for coreboot
This contains just the minimum information for a coreboot-based board.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:42 -08:00