Commit graph

1137 commits

Author SHA1 Message Date
Ruchika Gupta
7cad2e38d6 powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot
By default, PAMU's (IOMMU) are enabled in case of secure boot.
Disable/bypass them once the control reaches the bootloader.

For non-secure boot, PAMU's are already bypassed in the default
SoC configuration.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:17:42 -07:00
Ruchika Gupta
b9eebfade9 fsl_sec: Add hardware accelerated SHA256 and SHA1
SHA-256 and SHA-1 accelerated using SEC hardware in Freescale SoC's
The driver for SEC (CAAM) IP is based on linux drivers/crypto/caam.
The platforms needto add the MACRO CONFIG_FSL_CAAM inorder to
enable initialization of this hardware IP.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:17:07 -07:00
Ruchika Gupta
028dbb8db1 fsl_sec : Change accessor function to take care of endianness
SEC registers can be of type Little Endian or big Endian depending upon
Freescale SoC. Here SoC defines the register type of SEC IP.

So update acessor functions with common SEC acessor functions to take care
both type of endianness.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:16:50 -07:00
Ruchika Gupta
48ef0d2a10 fsl_sec : Move SEC CCSR definition to common include
Freescale SEC controller has been used for mpc8xxx. It will be used
for ARM-based SoC as well. This patch moves the CCSR defintion of
SEC to common include

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:16:25 -07:00
Masahiro Yamada
af55e35d33 powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR
These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00
Masahiro Yamada
e7a565638a powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7
These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00
Masahiro Yamada
9ed3246e19 powerpc: ppc4xx: remove board support for bluestone
This board has been orphaned for more than 6 months.

It is the last board defining CONFIG_APM821XX.
The code inside #ifdef CONFIG_APM821XX should be removed too.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00
Masahiro Yamada
1521cdc530 powerpc: ppc4xx: remove board support for CRAYL1
This board has been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:43 -04:00
Masahiro Yamada
dc9617e0ce powerpc: ppc4xx: remove board support for KAREF and METROBOX
These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-10 09:44:42 -04:00
Tom Rini
2c2277f15c Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2014-09-26 09:57:52 -04:00
Tom Rini
2c3dc792b6 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2014-09-26 09:51:18 -04:00
Chris Packham
039b77396a powerpc: add --bss-plt to LDFLAGS
With some versions of gcc (that we know of 4.6.3 and 4.8.2 are affected)
it is necessary to specify --bss-plt to get the final blrl in the
_GOT2_TABLE_. Without this the last symbol does not get it's address
relocated.  For the P2041RDB board this ended up being
NetArpWaitTimerStart which caused the ARP packets to timeout
immediately.

Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-25 09:22:37 -07:00
York Sun
1d71efbb03 driver/ddr: Restruct driver to allow standalone memory space
U-boot has been initializing DDR for the main memory. The presumption
is the memory stays as a big continuous block, either linear or
interleaved. This change is to support putting some DDR controllers
to separated space without counting into main memory. The standalone
memory controller could use different number of DIMM slots.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:18 -07:00
Masahiro Yamada
ab7cb4eefa mpc8xx: move common linker scripts into the CPU directory
Each CPU of PowerPC has its default linker script under the CPU
directory, except mpc8xx.

Every mpc8xx board has its own linker script under the board
directory, resulting in lots of duplication of linker scripts.

I notice eight mpc8xx boards have the same linker script.
We can decrease the number of linker scripts by putting a single
default linker script, arch/powerpc/cpu/mpc8xx/u-boot.lds.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2014-09-24 18:30:27 -04:00
Ebony Zhu
07c4eea484 powerpc/mpc85xx: Serdes protocol "00" is supported
"0x00" is a valid serdes protocol for QorIQ parts, and can not be
used to test whether the serdes is enabled or disabled.

Signed-off-by: Ebony Zhu <b45385@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-24 13:10:52 -07:00
ramneek mehresh
e628c8f75d powerpc/8xxx: Fix in USB device-tree fixup
Fix following issues in USB device-tree fixup:
        - returns when either dr_mode or phy_type not defined.
          This was terminating fix-up when only either property
          was defined in hwconfig string
        - updates dr_mode_type or dr_phy_type with junk value when
          their index is -1. Now these are updated only when their
          respective index is pointing to relevant types
          in modes[] and phys[] array
        - dr_mode_type and dr_phy_type were not NULL for
          each controller

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-24 13:05:51 -07:00
Masahiro Yamada
461be2f96e kconfig: remove redundant "string" type in arch and board Kconfigs
Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-13 16:43:55 -04:00
Claudiu Manoil
93f26f130e net: Merge asm/fsl_enet.h into fsl_mdio.h
fsl_enet.h defines the mapping of the usual MII management
registers, which are included in the MDIO register block
common to Freescale ethernet controllers. So it shouldn't
depend on the CPU architecture but it should be actually
part of the arch independent fsl_mdio.h.

To remove the arch dependency, merge the content of
asm/fsl_enet.h into fsl_mdio.h.
Some files (like fm_eth.h) were simply including fsl_enet.h
only for phy.h. These were updated to include phy.h instead.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
2014-09-08 10:30:33 -07:00
Vasili Galka
3400655e0f mpc5xxx: Add stub implementation of cache functions
Some drivers (e.g. net/e1000) reference these functions. So, this
fixes the build of MVBC_P board.

I'm not familiar with the MPC5xxx platform, maybe a full
implementation shall be implemented instead of this stub in the
future.

Signed-off-by: Vasili Galka <vvv444@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>, Marek Vasut <marex@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
2014-09-02 08:19:58 -04:00
Masahiro Yamada
aec6f8c59f powerpc: mpc8xx: remove FLAGADM board support
This board has been orphaned for a while and old enough.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-21 12:01:12 -04:00
Masahiro Yamada
6bde1ec10f powerpc: mpc8xx: remove GEN860T, GEN806T_SC board support
These boards have been orphaned for a while and old enough.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-21 12:01:12 -04:00
Masahiro Yamada
4723ce49e5 powerpc: mpc8xx: remove SXNI855T board support
This board has been orphaned for a while and old enough.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-21 12:01:12 -04:00
Masahiro Yamada
d1a4aafd71 powerpc: mpc8xx: remove svm_sc8xx board
This board has been orphaned for a while and old enough.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-21 12:01:12 -04:00
Masahiro Yamada
0ace4d9d8f powerpc: mpc8xx: remove stxxtc board support
This board has been orphaned for a while and old enough.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-21 12:01:12 -04:00
Shaveta Leekha
390619ddb3 powerpc/mpc85xx: Enabling CPC conditionally based on hwconfig options
If hwconfig does not contains "en_cpc" then by default all cpcs are enabled
If this config is defined then only those individual cpcs which are defined
in the subargument of "en_cpc" will be enabled e.g en_cpc:cpc1,cpc2; (this
will enable cpc1 and cpc2) or en_cpc:cpc2; (this enables just cpc2)

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-20 10:44:15 -07:00
Tang Yuantian
ce249d956c powerpc/t104xrdb: support deep sleep in SPI/SD boot
Add deep sleep support in SPI/SD boot. The destination address
second stage uboot image is loaded to is changed because
currently this address will be used by kernel which means
we can't reserve it for resume.

Entry point to kernel is still placed in second stage uboot.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-12 12:26:47 -07:00
Tang Yuantian
3067547502 powerpc/mpc85xx: Make boot flag effective
bootflag as a parameter is passed to board_init_f().
But it is not actually used in this function.
Make it effective by assigned it to gd->flags.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-12 12:26:47 -07:00
Tom Rini
dcdb61a084 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2014-08-06 08:38:18 -04:00
Boschung, Rainer
919e05520f powerpc: mpc85xx watchdog init added to init_func
When CONFIG_WATCHDOG is defined the board initialization just performs
a WATCHDOG_RESET, an initialization of the watchdog is not done.
This has been modified fot the MPC85xx, the board initialization calls
its watchdog initialitzation allowing for full watchdog configuration
very early in the boot phase.

Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01 14:18:28 -07:00
Boschung, Rainer
0f8062b25b mpc85xx: watchdog initialisation added
Function to inititialize the cpu watchdog added.

Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com>
[York Sun: Add prototype in watchdog.h]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01 14:18:17 -07:00
Boschung, Rainer
60b295672d powerpc: macros for e500mc timer regs added
For e500mc cores the watchdog timer period has to be set by means of a
6bit value, that defines the bit of the timebase counter used to signal
a watchdog timer exception on its 0 to 1 transition.
The macro used to set the watchdog period TCR_WP, was redefined for e500mc
to support 6 WP setting.

The parameter (x) given to the macro specifies the prescaling factor of
the time base clock (fTB):

watchdog_period = 1/fTB * 2^x

Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01 14:18:07 -07:00
Boschung, Rainer
3345d18d5b mpc85xx: fix interrupt init to not affect watchdog
TCR watchdog bit are overwritten when dec interrupt is enabled.
This has been fixed with this patch.

Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01 14:17:44 -07:00
Masahiro Yamada
c6d12624ae powerpc: remove redundant CPU definition
CONFIG_${CPU} is defined by Kconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Roese <sr@denx.de>
2014-07-30 14:42:03 -04:00
Masahiro Yamada
90f984e397 kconfig: delete redundant CONFIG_${ARCH} definition
CONFIG_${ARCH} is defined by Kconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2014-07-30 14:42:02 -04:00
Masahiro Yamada
51148790f2 kconfig: switch to Kconfig
This commit enables Kconfig.
Going forward, we use Kconfig for the board configuration.
mkconfig will never be used. Nor will include/config.mk be generated.

Kconfig must be adjusted for U-Boot because our situation is
a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL)
from one source tree.
Each image needs its own configuration input.

Usage:

Run "make <board>_defconfig" to do the board configuration.

It will create the .config file and additionally spl/.config, tpl/.config
if SPL, TPL is enabled, respectively.

You can use "make config", "make menuconfig" etc. to create
a new .config or modify the existing one.

Use "make spl/config", "make spl/menuconfig" etc. for spl/.config
and do likewise for tpl/.config file.

The generic syntax of configuration targets for SPL, TPL is:

  <target_image>/<config_command>

Here, <target_image> is either 'spl' or 'tpl'
      <config_command> is 'config', 'menuconfig', 'xconfig', etc.

When the configuration is done, run "make".
(Or "make <board>_defconfig all" will do the configuration and build
in one time.)

For futher information of how Kconfig works in U-Boot,
please read the comment block of scripts/multiconfig.py.

By the way, there is another item worth remarking here:
coexistence of Kconfig and board herder files.

Prior to Kconfig, we used C headers to define a set of configs.

We expect a very long term to migrate from C headers to Kconfig.
Two different infractructure must coexist in the interim.

In our former configuration scheme, include/autoconf.mk was generated
for use in makefiles.
It is still generated under include/, spl/include/, tpl/include/ directory
for the Normal, SPL, TPL image, respectively.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:03 -04:00
Masahiro Yamada
dd84058d24 kconfig: add board Kconfig and defconfig files
This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 08:48:01 -04:00
Tom Rini
302e609fe6 Merge git://www.denx.de/git/u-boot-ppc4xx 2014-07-28 17:48:48 -04:00
Tom Rini
d5f8a6ddd4 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2014-07-28 14:54:29 -04:00
Dirk Eibach
d29437aa77 ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARD
The generic board  infrastructure assumes that gd is set by
arch code.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2014-07-25 10:55:49 +02:00
Simon Glass
709ea543b9 stdio: Pass device pointer to stdio methods
At present stdio device functions do not get any clue as to which stdio
device is being acted on. Some implementations go to great lengths to work
around this, such as defining a whole separate set of functions for each
possible device.

For driver model we need to associate a stdio_dev with a device. It doesn't
seem possible to continue with this work-around approach.

Instead, add a stdio_dev pointer to each of the stdio member functions.

Note: The serial drivers have the same problem, but it is not strictly
necessary to fix that to get driver model running. Also, if we convert
serial over to driver model the problem will go away.

Code size increases by 244 bytes for Thumb2 and 428 for PowerPC.

22: stdio: Pass device pointer to stdio methods
       arm: (for 2/2 boards)  all +244.0  bss -4.0  text +248.0
   powerpc: (for 1/1 boards)  all +428.0  text +428.0

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-07-23 14:07:23 +01:00
Tang Yuantian
7cb7272365 mpc85xx/t104x: Enable L2 and CPC cache when resume
When resume from deep sleep, uboot needs to enable L2 and CPC
cache, or they would be keeping unusable in kernel because
kernel didn't enble or initialized them.
This patch didn't change the existing L2 cache enabling code,
just put them in a function.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:55 -07:00
Shaveta Leekha
a1399a9187 powerpc/chassis2: Configure and enable L2 cache for PPC clusters only
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:55 -07:00
Shaohui Xie
e55782eccc powerpc/t4240qds: fix offset of serdes when checking reference clock
T4240 has 4 serdes, each serdes has 4k memory space, two PLLs.
We use PLL1CR0 to check the serdes reference clock.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:55 -07:00
York Sun
8340e7ac86 driver/ddr: Fix DDR4 driver for ARM
Previously the driver was only tested on Power SoCs. Different barrier
instructions are needed for ARM SoCs.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:54 -07:00
Sandeep Singh
d43a386a91 powerpc/mpc85xx: Removed support for G4060
G4060 has no PA cores, hence removing its support.

Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:54 -07:00
Zhao Qiang
38d67a4e55 qe: move immap_qe.h from arch directory into common directory
ls1021 is arm-core and supports qe too.
Move immap_qe.h into common directory for both arm and powerpc.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:54 -07:00
Shengzhou Liu
605714f669 powerpc/85xx: add fdt_fixup_dma3
On some SoC(e.g. T2080/T4240) the 3rd DMA is not functional if SRIO2 is
chosen. we add fdt_fixup_dma3() to disable the 3rd DMA if SRIO2 is chosen.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:53 -07:00
Masahiro Yamada
443a2ec57a blackfin, powerpc: remove redundant definitions of ARRAY_SIZE
Since ARRAY_SIZE macro is defined in include/common.h,
re-defining it in arch-specific files is redundant.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
2014-07-07 19:47:12 -04:00
Masahiro Yamada
98ad54beb5 mpc8xx: remove spc1920 board support
This board is old enough and has no maintainer.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07 19:43:02 -04:00
Masahiro Yamada
03f9d7d174 mpc8xx: remove fads board support
These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-07 19:43:02 -04:00