Commit graph

272 commits

Author SHA1 Message Date
Patrice Chotard
3feea0ba19 spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.

To sum-up:
 - Previous call tree was:
    spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

 - Current call tree is:
    spi_flash_probe() -> _spi_get_bus_and_cs()
    spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

This patch impacts the following :
  - cmd/sf.c: if spi mode and/or speed is passed in argument of
    do_spi_flash_probe(), call spi_flash_probe() otherwise call
    spi_flash_probe_bus_cs().

  - drivers/net/fm/fm.c: as by default spi speed and mode was set to
    0 and a comment indicates that speed and mode are read from DT,
    use spi_flash_probe_bus_cs().

  - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
    from DT by all platforms using this driver, so keep legacy and replace
    spi_flash_probe_bus_cs() by spi_flash_probe();

  - drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
    so replace spi_flash_probe_bus_cs() by spi_flash_probe().

  - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
    usage of this driver, nevertheless, keep legacy and replace
    spi_get_bus_and_cs() by _spi_get_bus_and_cs().

  - env/sf.c: a comment indicates that speed and mode are read
    from DT. So use spi_flash_probe_bus_cs().

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
Pali Rohár
f4bf81b013 env: sf: Allow to use env_sf_init_addr() at any stage
In some cases it makes sense to use env_sf_init_addr() also in SPL mode.
Allow it for boards by providing custom implementation of weak function
env_sf_get_env_addr(). When this function returns NULL it signals that
address is invalid, like config option CONFIG_ENV_ADDR.

There is no change in default behavior or in config options.

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-05-02 07:28:25 +02:00
Marek Vasut
de70e8879b env: Implement lower priority arch_env_get_location()
Currently there is only one way to override desired environment location,
by implementing env_get_location(). This is increasingly being conflated
both on board level and architecture level, which leads to a problem on
boards where this function is already implemented on architecture level,
since those boards have no way to override this environment location on
board level anymore.

Implement arch_env_get_location() function which is architecture specific
and should only ever be implemented in architecture code. This function
has lower priority than env_get_location(), which should only ever be
implemented in board code, and which overrides the arch_env_get_location()
architecture environment selection.

This way, architecture can define its default environment chooser, while
board can now override it as needed at all times.

There is no functional change, since env_get_location() simply returns
arch_env_get_location(), and arch_env_get_location() implements the
current env_get_location() default content.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Marek Behún <marek.behun@nic.cz>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Tommaso Merciai <tomm.merciai@gmail.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-21 09:08:40 -04:00
Marek Vasut
5c7399ec90 Revert "env: Load env when ENV_IS_NOWHERE is only location selected"
This reverts commit 8d61237edb.

This commit broke environment on literally every board I have access
to, with this revert in place, environment works as it should again.
The problem I observe with this patch is that saved environment in
either SPI NOR or eMMC is never used, the system always falls back
to default environment. The 'saveenv' command does succeed, but then
after reset, the default env is again used.

Furthermore, the commit introduced duplicate code in env_init(), this:
"
	if (!prio) {
		gd->env_addr = (ulong)&default_environment[0];
		gd->env_valid = ENV_INVALID;

		return 0;
	}

	if (ret == -ENOENT) {
		gd->env_addr = (ulong)&default_environment[0];
		gd->env_valid = ENV_INVALID;

		return 0;
	}
"

Furthermore, the commit is missing DCO SoB line.

Also note that upstream does not support UltraZed EG board, so
this might have been a patch pulled from downstream which did
depend on some other downstream behavior.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Felix.Vietmeyer@jila.colorado.edu <felix.vietmeyer@jila.colorado.edu>
Cc: Tom Rini <trini@konsulko.com>
2022-04-10 11:20:16 -04:00
He Yong
eb68ead2d3 env: fat: Allow overriding interface, device and partition
For platform which can boot on different device, this allows
to override interface, device and partition from board code

Signed-off-by: He Yong <hyyoxhk@163.com>
2022-04-07 16:50:53 -04:00
Felix.Vietmeyer@jila.colorado.edu
8d61237edb env: Load env when ENV_IS_NOWHERE is only location selected
This patch prevent u-boot from hanging on a UltraZed EG board (zynqmp).

Without the patch,
(drv = env_driver_lookup(ENVOP_INIT, prio))
evaluates to 0, causing prio = 0
Then, (!prio) is hit, returning -ENODEV causing a stall.

With the patch,
instead of returning -ENODEV and causing a stall, we
set gd->env_addr (is this really needed?)
and then
mark gd->env_valid = ENV_INVALID to use the default env.
2022-04-07 13:52:36 -04:00
Tom Rini
0e14cdfaf3 Convert CONFIG_ETHPRIME to Kconfig
This converts the following to Kconfig:
   CONFIG_ETHPRIME

This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME
similar to other options that are not always set and control environment
variables.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 12:48:17 -04:00
Tom Rini
2abf048ab7 Prepare v2022.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmIvp/8ACgkQFHw5/5Y0
 tyyI6wwApR++p9BBlWEZn1B5sivCXcs9oCX3Vs8vegpiiRbs/pGsyKV6pfEHHYV5
 lhw1YNZ0accKmqBmX19tdpQ2ZzHq3+g0eGJL8xioXU3hRoZZNsDewAF8KS+aHPpk
 qMuA+xbDi08I6z2qtrIpaDd//DO2jAkFF+/TKOzSgUSxBaomQiziZaB2x28bIBH2
 zsLMP4vzZ03uCSZVSd7HMBz0qiGhioJo5Ch2eU4TTJW19CXeMTAuav6SDq+6vJGi
 cIUe31YEe742jOVmtf2RuJQ+mDjsEfT11wvRajcbOlH/Ho7E5iFxQkmOEThpvybE
 YD5d5uLLpQj42PfBpSvx4nMJcvyOmqxdizUJxCgi/q5HrhdzcO6LwLLON0T4W4zG
 Vsue+iTjOKXgLdD8g/VogL38iHxhpfY7zsFB98vvHcoLwhEXvfvhO8Dj/lwLw4Ic
 88B6uz3TqAPNqSnTWphJPCwG8STwyqlvLXwTF+eICbtQW3uuHEtnmlsXQJeFmdUa
 fGK8dUfr
 =wyE5
 -----END PGP SIGNATURE-----

Merge tag 'v2022.04-rc4' into next

Prepare v2022.04-rc4
2022-03-14 17:40:36 -04:00
Andre Przywara
753a85fd15 env: sunxi: enable ENV_IS_IN_SPI_FLASH
Now that sunxi uses CONFIG_SPI more sanely, and can also now properly
load the environment from SPI flash, let's enable the symbol that
actually considers the SPI flash when accessing the environment.

As this symbol depends on CONFIG_SPI, which we now only enable if the
board has a SPI flash, we can make if "default y" for all Allwinner
boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-03-10 17:34:11 +05:30
Andre Przywara
2bdf213f91 env: sunxi: Define location in SPI flash
To allow loading and storing the environment from SPI flash, adjust the
raw offset variables for Allwinner boards to make sense there.

U-Boot (including SPL and other blobs) is loaded from the beginning of
SPI flash, so move the environment location as far back as possible, to
not create unnecessary limits. As those offsets are shared with (now
mostly unused) raw MMC environment, we should respect the common one
megabyte limit, which also makes sense on SPI flash.

So limit the environment for those raw locations to 64KB, and place it
just below 1MB (@960KB).

Those values are currently unused, unless someone forcibly enables the
raw MMC environment. In this case it would break as of now, as the
current offset of 544KB is far too low for the current (arm64) U-Boot
proper.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-03-10 17:33:23 +05:30
Tom Rini
fdfb17b1f5 Convert CONFIG_BOOTFILE to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTFILE

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03 16:51:20 -05:00
Heinrich Schuchardt
185f812c41 doc: replace @return by Return:
Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19 18:11:34 +01:00
Peter Robinson
f6f27be146 env: fat: Add new lines at the end of print statements
Add some new line feeds at the end of print messages to make things
easier to read on the console. The other env options do this so
this is just an omission for FAT env.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2022-01-14 14:36:57 -05:00
Tom Rini
7e6a6fd821 Convert CONFIG_ENV_SPI_BUS et al to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_SPI_BUS
   CONFIG_ENV_SPI_CS
   CONFIG_ENV_SPI_MAX_HZ
   CONFIG_ENV_SPI_MODE

As part of this, we use Kconfig to provide the defaults now that were
done in include/spi_flash.h.  We also in some cases change from using
CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in
use anyhow as ENV was not enabled.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 08:40:33 -05:00
Simon Glass
7839865272 bootm: Tidy up use of autostart env var
This has different semantics in different places. Go with the bootm method
and put it in a common function so that the behaviour is consistent in
U-Boot. Update the docs.

To be clear, this changes the way that 'bootelf' and standalone boot
work. Before, if autostart was set to "fred" or "YES", for example, they
would consider that a "yes". This may change behaviour for some boards,
but the only in-tree boards which mention autostart use "no" to disable
it, which will still work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Wolfgang Denk <wd@denx.de>
2021-11-16 14:35:09 -05:00
Simon Glass
86b9c3e4e4 env: Allow U-Boot scripts to be placed in a .env file
At present U-Boot environment variables, and thus scripts, are defined
by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
to this file and dealing with quoting and newlines is harder than it
should be. It would be better if we could just type the script into a
text file and have it included by U-Boot.

Add a feature that brings in a .env file associated with the board
config, if present. To use it, create a file in a board/<vendor>
directory, typically called <board>.env and controlled by the
CONFIG_ENV_SOURCE_FILE option.

The environment variables should be of the form "var=value". Values can
extend to multiple lines. See the README under 'Environment Variables:'
for more information and an example.

In many cases environment variables need access to the U-Boot CONFIG
variables to select different options. Enable this so that the environment
scripts can be as useful as the ones currently in the board config files.
This uses the C preprocessor, means that comments can be included in the
environment using /* ... */

Also support += to allow variables to be appended to. This is needed when
using the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Behún <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
2021-11-16 14:35:08 -05:00
Marek Behún
4e7c8b2a1c env: Simplify env_get_default()
Instead of pretending that we don't have environment to force searching
default environment in env_get_default(), get the data from the
default_environment[] buffer directly.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-13 08:16:39 -07:00
Marek Behún
e8459c12fd env: Fix env_get() when returning empty string using env_get_f()
The env_get_f() function returns -1 on failure. Returning 0 means that
the variable exists, and is empty string.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-13 08:16:39 -07:00
Marek Behún
c9db4c5440 env: Don't set ready flag if import failed in env_set_default()
Do not set GD_FLG_ENV_READY nor GD_FLG_ENV_DEFAULT if failed importing
in env_set_default().

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-13 08:16:39 -07:00
Marek Behún
37f3758a25 env: Use static_assert() to check if default_environment is too large
Check sizeof(default_environment) against ENV_SIZE in a static_assert()
instead of runtime.
Only check if !USE_HOSTCC (for in fw_env tool ENV_SIZE expands to a
variable, and cannot be checked statically) nad
!DEFAULT_ENV_INSTANCE_EMBEDDED, for in that case the default_environment
variable is not set.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
c5cbbe35fd env: Always use char for default_environment
Sometimes we use uchar and sometimes char for the default environment
array. By always using char, we can get rid of some explicit casts.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
ee483902ae env: flash: Cosmetic fix
Change tab to space in env_flash_init().

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
cf89c5180a env: flash: Let generic env_init() assign default environment
env_flash_init() (both implementations) assigns default environment if
ENV_INVALID, but this is done in the generic env_init() function, which
calls this initializer, so drop it from here.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
9fc3106219 env: nowhere: Cosmetic fix
Use spaces instead of tabs in assignments, since there are no lines to
align assignment values to.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
5aab7f5dec env: nowhere: Let generic env_init() assign default environment
env_nowhere_init() assigns default environment if ENV_INVALID, but this
is done in the generic env_init() function, which calls this
initializer, so drop it from here.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
a73c1f006c env: nvram: Cosmetic fix in env_nvram_init()
Use spaces consistently in assignments instead of tabs.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
4735de4ffc env: nvram: Let generic env_init() assign default environment
env_nvram_init() assigns default environment if ENV_INVALID, but this is
done in the generic env_init() function, which calls this initializer,
so drop it from here.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
07dcd82546 env: nand: Put ENV_INVALID into gd->env_valid if default environment
env_nand_init() says the environment is valid even if it is assigning
default environment due to not being able to access nand pre-reloaction
(determined by macro values). Change this to ENV_INVALID and let the
generic env_init() function, which calls this initializer, assign the
default environment.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
af8149e9ac env: sf: Put ENV_INVALID into gd->env_valid on CRC failure
env_sf_init_addr() says the environment is valid even if it is assigning
default environment due to CRC failure. Change this to ENV_INVALID and
let the generic env_init() function, which calls this initializer,
assign the default environment.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
87221bd66c env: sf: Use ENV_VALID enum names instead of literals
The function env_sf_init_addr() assigns number literals (1) instead of
ENV_VALID to gd->env_valid. Fix this.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Marek Behún
9ab30d2baf env: sf: Cosmetic fix in env_sf_init_addr()
In the if clause we use tabs and in the else clause spaces. Let's use
spaces in the if clause too.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 12:26:44 -06:00
Heinrich Schuchardt
28ab12ad14 env: superfluous check before free()
Free() checks if its argument in NULL. There is no need for the caller to
do the same.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-26 15:26:45 -04:00
Marek Vasut
d11d1becbd env: mmc: Add support for redundant env in both eMMC boot partitions
Currently the MMC environment driver supports storing redundant environment
only in one eMMC partition at different offsets. This is sub-optimal, since
if this one boot partition is erased, both copies of environment are lost.
Since the eMMC has two boot partitions, add support for storing one copy of
environment in each of the two boot partitions.

To enable this functionality, select CONFIG_SYS_REDUNDAND_ENVIRONMENT to
indicate redundant environment should be used. Set CONFIG_SYS_MMC_ENV_PART
to 1 to indicate environment should be stored in eMMC boot partition. Set
CONFIG_ENV_OFFSET equal to CONFIG_ENV_OFFSET_REDUND, and both to the offset
from start of eMMC boot partition where the environment should be located.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-10-25 14:33:13 -04:00
Marek Vasut
f47f87f257 env: mmc: Add missing eMMC bootpart restoration to env erase
If the environment is stored in eMMC hardware boot partition, the environment
driver first stores the currently selected eMMC boot partition, then does the
requested operation, and then restores the original boot partition settings.
In case the environment operation fails, the boot partition settings are also
restored.

The 'env erase' implementation in the MMC environment driver lacks the path
which restores the boot partition. This could lead to various failure modes,
like the system boots the wrong copy of bootloader etc. Fix this by filling
in the missing restoration path.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
2021-10-25 14:29:37 -04:00
Tom Rini
355d1e24f6 Merge https://source.denx.de/u-boot/custodians/u-boot-spi
- Fix mtd erase with mtdpart (Marek Behún)
- NXP fspi driver fixes (Kuldeep Singh)
2021-10-23 10:49:28 -04:00
Marek Behún
0d1ecc99cb mtd: Remove mtd_erase_callback() entirely
The original purpose of mtd_erase_callback() in Linux at the time it was
imported to U-Boot, was to inform the caller that erasing is done (since
it was an asynchronous operation).

All supplied callback methods in U-Boot do nothing, but the
mtd_erase_callback() function was (until previous patch) grossly abused
in U-Boot's mtdpart implementation for completely different purpose.

Since we got rid of the abusement, remove the mtd_erase_callback()
function and the .callback member from struct erase_info entirely, in
order to avoid such problems in the future.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-23 15:47:33 +05:30
Marek Behún
f231566475 env: Move non-cli env functions to env/common.c
Move the following functions from cmd/nvedit.c to env/common.c:
  env_set_ulong()
  env_set_hex()
  env_get_hex()
  eth_env_get_enetaddr()
  eth_env_set_enetaddr()
  env_get()
  from_env()
  env_get_f()
  env_get_ulong()
since these functions are not specific for U-Boot's CLI.

We leave env_set() in cmd/nvedit.c, since it calls _do_env_set(), which
is a static function in that file.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
52f9ed34cb env: Inline env_get_char() into its only user
This function is a relic from the past when environment was read from
underlying device one character at a time.

It is used only in the case when getting an environemnt variable prior
relocation, and the function is simple enough to be inlined there.

Since env_get_char() is being changed to simple access to an array, we
can drop the failing cases and simplify the code (this could have been
done before, since env_get_char() did not fail even before).

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Marek Behún
dd1c5a7f80 env: Drop env_get_char_spec() and old, unused .get_char() implementations
Commit b2cdef4861 ("env: restore old env_get_char() behaviour")
dropped the .get_char() method from struct env_driver, but left the two
existing implementations (eeprom and nvram) in case someone would use
them by overwriting weak function env_get_char_spec().

Since this was never done in the 3.5 years, let's drop these methods and
simplify the code.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Simon Glass
7de8bd03c3 treewide: fdt: Move fdt_get_config_... to ofnode_conf_read...
The current API is outdated as it requires a devicetree pointer.

Move these functions to use the ofnode API and update this globally. Add
some tests while we are here.

Correct the call in exynos_dsim_config_parse_dt() which is obviously
wrong.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-25 09:46:15 -06:00
Tom Rini
2c14ff5879 Revert "env: Make _init() expect _INVALID when _IS_NOWHERE"
Upon further discussion, this is not required now.

This reverts commit f6bc5d17af.

Link: https://lore.kernel.org/r/ebd92337-669a-9a0a-0af3-d06b957f3b40@denx.de/
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-24 07:43:22 -04:00
Pierre-Clément Tosi
f6bc5d17af env: Make _init() expect _INVALID when _IS_NOWHERE
Avoid applying the "fix" introduced by commit 5557eec01c ("env: Fix
invalid env handling in env_init()") to the environment "nowhere".

This is necessary as that commit, by setting the return value of
env_init() to -ENOENT if gd->env_valid is ENV_INVALID, forces that
function to reset gd->env_valid to ENV_VALID. By doing so, it breaks the
assumption (required by ENV_IS_NOWHERE) that gd->env_valid must be
ENV_INVALID.

This, in turn, results in env_relocate() calling env_load() (it should
not), which itself, calls U_BOOT_ENV_LOCATION(nowhere).load() i.e.
env_nowhere_load(). That function, being implemented under the
assumption mentioned above, calls env_set_default(), which in turn,
seeing that gd->env_valid is ENV_VALID (it should not), tries to
dereference whatever lies in gd->env_addr (most likely garbage), leading
to a faulty memory access.

Note that other env_locations might be concerned by this bug but that
this commit only intends to fix it for when ENV_IS_NOWHERE.

Fixes: 5557eec01c ("env: Fix invalid env handling in env_init()")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
2021-09-23 08:55:06 -04:00
Michal Simek
b4c2c151b1 Kconfig: Remove all default n/no options
default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00
Tom Rini
88cd7d0ea9 Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to Kconfig
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
  based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
  CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  to Kconfig.  We move these symbols around a bit and add appropriate
  dependencies to them.  In some cases, we now add a correct default value
  as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:06 -04:00
Tom Rini
c18afbe0ab eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usage
At this point in time, there's no systems with "U-Boot environment
exists on an EEPROM which is accessed over the I2C bus" that sets this
option.  Drop it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:06 -04:00
Kuldeep Singh
9b90e0d08f env: Kconfig: Add default option for PHY_CORTINA
Add PHY_CORTINA as default option in SYS_MMC_ENV_DEV Kconfig entry as
PHY_CORTINA require SYS_MMC_ENV_DEV value similar to FMAN_ENET or QE.
This helps in resolving compilation failure.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-08-18 15:55:15 +05:30
Samuel Holland
1011ebc72b sunxi: Select environment MMC based on boot device
Currently, the environment is always stored in eMMC if eMMC is enabled
in the config. This means images written to SD and eMMC will cross-
contaminate their environments unless the configuration is changed.

By dropping the device number from the environment location string and
implementing mmc_get_env_dev, we will always use the environment from
the boot device when booting from SD/eMMC.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-01 00:11:34 +01:00
Tom Rini
1c58857ad7 ppc: Remove sbc8641d board
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  This is also the last
of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-07 19:52:24 -04:00
Tom Rini
ed7fe2bee1 ppc: Remove xpedite boards
These boards have not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove them.  As this includes
the last ARCH_MPC8572 platform, remove that as well.

Cc: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Peter Tyser <ptyser@xes-inc.com>
2021-07-07 19:52:24 -04:00
Tom Rini
9b7993bba9 m68k: Remove M5475x boards
These board has not been converted to CONFIG_DM_PCI by the deadline.
Remove them.  As this is the last of the mcf547x_8x family of boards,
remove that support as well.

Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07 19:52:22 -04:00