Commit graph

2138 commits

Author SHA1 Message Date
Tom Rini
c590e62d3b Merge git://git.denx.de/u-boot-fsl-qoriq 2018-05-11 07:09:21 -04:00
Fabio Estevam
53deb24dda board/freescale: Remove invalid fsl email addresses
These fsl email addresses are no longer valid and they do not have a
correspondent nxp.com entry.

Remove all invalid fsl email addresses and mark the boards as orphan.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-10 20:38:33 -04:00
Fabio Estevam
ba74491e24 p1022ds: Change Timur's email address
timur@freescale.com is not a valid email for quite some time, so change
it to Timur's updated email.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Timur Tabi <timur@tabi.org>
2018-05-10 20:38:33 -04:00
Ashish Kumar
7d3a532d5d armv8: ls1088: Update 1900MT/s DDR timing to bring consistency
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Ashish Kumar
11d5f7d895 armv8: ls1088aqds: Enable mdio commands on u-boot prompt
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09 09:17:51 -05:00
Tom Rini
83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
Fabio Estevam
08ae21af96 MAINTAINERS: Switch nxp.com domain
freescale.com domain is no longer reachable, so switch the
maintainers' emails to nxp.com domain instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-01 22:38:10 -04:00
Tom Rini
b25f8e2112 Merge git://git.denx.de/u-boot-imx 2018-04-30 07:14:05 -04:00
Tom Rini
d024236e5a Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27 14:54:48 -04:00
Fabio Estevam
feb14c6348 mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target
mx7dsabresd_secure_defconfig was introduced to allow booting NXP kernel
that has CAAM support and needs to boot in secure mode.

Instead of keeping two different config targets for the same board,
remove mx7dsabresd_secure_defconfig and select
CONFIG_ARMV7_BOOT_SEC_DEFAULT inside mx7dsabresd_defconfig so that
this target could be used to boot both mainline and the vendor kernel.

This makes maintenance task easier and avoid potentially confusion
for the end user.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2018-04-26 08:57:52 +02:00
Tom Rini
ebca902aeb Merge git://git.denx.de/u-boot-imx
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 08:43:50 -04:00
Tom Rini
448fc44fb8 mx31ads: Delete
This platform has been marked as orphaned since September 2013, remove.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 11:54:02 +02:00
Calvin Johnson
28e3c39e53 board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb
This patch enables ethernet support for ls1012a2g5rdb.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:30 -05:00
Calvin Johnson
7ab16479e1 board: freescale: ls1012ardb: enable network support on ls1012ardb
This patch enables ethernet support for ls1012ardb.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:30 -05:00
Calvin Johnson
a141f33af5 board: freescale: ls1012afrdm: enable network support on ls1012afrdm
This patch enables ethernet support for ls1012afrdm.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:29 -05:00
Calvin Johnson
7a8df8ba33 board: freescale: ls1012aqds: enable network support on ls1012aqds
This patch enables ethernet support for ls1012aqds.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-03-22 15:05:29 -05:00
Ashish Kumar
c1c597e8a8 armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
IFC-NOR and QSPI-NOR pins are multiplexed on SoC, so they cannot be
accessed simultaneously. IFC-NOR can be accessed along with SD-BOOT.

Ls1088aqds_sdcard_ifc_defconfig is default config for SD boot and
IFC-NOR to be used as flash. This allows writing to IFC-NOR flash.
QSPI and DSPI cannot be accessed in this defconfig.
IFC-NOR image is generated using ls1088aqds_defconfig.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:27:13 -07:00
Ashish Kumar
169d493bb7 armv8: ls1088a: Add i2c_early_init() func for LS1088AQDS
This function is required for enabling access to early i2c function
for correct usage of QIXIS_READ and QIXIS_WRITE.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:26:52 -07:00
Ashish Kumar
d12b166a00 armv8: ls1088a: Add clock related function in CONFIG_SPL_BUILD
get_board_ddr_clk(), get_board_sys_clk() and if_board_diff_clk() is
now available for SPL build.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-03-20 08:26:02 -07:00
Masahiro Yamada
b08c8c4870 libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include <libfdt.h>      -> #include <linux/libfdt.h>
  #include <libfdt_env.h>  -> #include <linux/libfdt_env.h>

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-05 10:16:28 -05:00
Eric Nelson
0093b3fcd8 mx6memcal: enable SDP support
The initial implementation of mx6memcal reset the CPU after
running the memory calibration procedure because the generic
board has no information about which boot devices are available.

Now that we have SDP support in SPL, use it to allow a full
U-Boot to be uploaded (i.e. to use "mtest").

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-04 12:00:58 +01:00
Patrick Bruenn
55e83d2e36 arm: imx: mx53loco: remove usage of mx53_dram_size
Static variables are not available during board_init_f().
'static uint32_t mx53_dram_size[2];' was used in board specific
dram_init(), dram_init_banksize() and get_effective_memsize() to avoid
multiple calls to get_ram_size().

Reused dram initialization functions from arch/arm/mach-imx/mx5/mx53_dram.c

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2018-02-04 12:00:58 +01:00
York Sun
58932ec68c armv8: ls2088ardb: Add 3DS RDIMM support
Tested with MTA72ASS8G72PSZ-2S6G1. This is 3DS RDIMM module with x4
DDR chips. LS2088ARDB needs to be modified to connect all DQS signals.
Some of them are grounded by default for x8 chips. Tested with RDIMM
MTA18ASF2G72PDZ on main memory controllers. DP-DDR doesn't support
RDIMM. Dropped related timing table.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-01-30 09:14:07 -08:00
York Sun
f513de6c82 armv8: ls1046ardb: Add RDIMM support
This adds 2Rx8 RDIMM on LS1046ARDB board. Tested with RDIMM
MTA18ASF2G72PDZ and MTA9ASF1G72PZ.

Signed-off-by: York Sun <york.sun@nxp.com>
2018-01-30 09:14:07 -08:00
Ashish Kumar
fe997689c3 fsl: common: qixis: Add ifc and emmc switching via qixis
Currently only SD, NAND can be secondary boot sources controlled
by FPGA/CPLD via qixis commands. For SoC like LS1088 IFC-NOR
can be secondary boot source, while QSPI-NOR is the primary.
Add options in qixis to switch to other boot sources including
ifc and emmc.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:22:12 -08:00
Rajesh Bhagat
980d61a270 armv8: ls1088a: vid: Compiling VID specific functions for SPL
Enables and compiles VID specific functions for SPL.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:21:00 -08:00
Rajesh Bhagat
ef0789b7c6 ls1088a: Add VID support for QDS and RDB platforms
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems.
It reads the fusesr register and changes the VDD accordingly by adjusting
the voltage via LTC3882 regulator.

This patch also takes care of the special case of 0.9V VDD is present in
fusesr register. In that case,it also changes the SERDES voltage by
disabling the SERDES, changing the SVDD and then re-enabling SERDES.

Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:20:53 -08:00
Rajesh Bhagat
1fab98fb90 common: board_f: vid: Add VID specific API to adjust core voltage
Adds a VID specific API in init_sequence_f and spl code flow
namely init_func_vid which is required to adjust core voltage.

VID specific code is required in spl, hence moving flag CONFIG_VID
out of spl flags.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:20:46 -08:00
Rajesh Bhagat
75ad48153f ls1088a: ddr: configure DDR for 0.9v for VID support
When VID feature is supported, check the contents of fuse register
and configure DDR operate at 0.9v.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:20:28 -08:00
Rajesh Bhagat
23a12cb3d0 board: common: vid: Add support for LTC3882 voltage regulator chip
Restructures common driver to support LTC3882 voltage regulator
chip.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:19:56 -08:00
Rajesh Bhagat
6f2d0a5020 Kconfig: Add LTC3882 voltage regulator config
Adds below LTC3882 voltage regulator config:
CONFIG_VOL_MONITOR_LTC3882_READ
CONFIG_VOL_MONITOR_LTC3882_SET

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:19:49 -08:00
Rajesh Bhagat
9458316a3a board: common: vid: Move IR chip specific code in flag
Moves IR chip (IR36021) specific code in flag to resolve
compilation issue where it is not present. For example,
LS1088A is having a new LTC3882 voltage chip.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:19:38 -08:00
Rajesh Bhagat
3607570b11 board: common: vid: Add board specific vdd adjust API
Adds a board specific API namely board_adjust_vdd which
is required to define the board VDD adjust settings.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:19:25 -08:00
Rajesh Bhagat
c535ad4e91 board: common:vid: Add LS1088A VID Supported voltage values
Adds below voltage values supported by LS1088A Soc:
1.025V(default), 0.9875V, 0.9750V, 0.9V, 1.0V, 1.0125V, 1.0250V.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:18:35 -08:00
Tuomas Tynkkynen
7dd97af523 powerpc: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_CYRUS
CONFIG_IDS8313
CONFIG_MPC8308_P1M
CONFIG_MPC8308RDB
CONFIG_MPC8349EMDS
CONFIG_MPC8349ITXGP
CONFIG_SBC8349
CONFIG_SBC8548
CONFIG_SBC8641D
CONFIG_TQM834X
CONFIG_VE8313
CONFIG_XPEDITE5140
CONFIG_XPEDITE5200
CONFIG_XPEDITE550X

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Acked-by: Mario Six <mario.six@gdsys.cc>
2018-01-19 15:49:32 -05:00
Tuomas Tynkkynen
e6e5ecc5e2 m68k: Drop unreferenced CONFIG_* defines
The following config symbols are only defined once and never referenced
anywhere else:

CONFIG_AMCORE
CONFIG_ASTRO5373L
CONFIG_M52277EVB
CONFIG_M5253DEMO
CONFIG_M5253EVBE
CONFIG_M5275EVB
CONFIG_M54418TWR
CONFIG_STMARK2

Most of them are config symbols named after the respective boards which
seems to have been a standard practice at some point.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19 15:49:32 -05:00
Tom Rini
086ebcd40e Merge git://git.denx.de/u-boot-fsl-qoriq 2018-01-17 13:48:35 -05:00
Tom Rini
1f0ce3259e freescale: Ensure common commands are not included in SPL binary
Both the "qixis_reset" and esbc_validate" commands can only be used in
full U-Boot so do not build them in SPL.  As part of this rework the
qixis code to declare things as static and make use of __weak for
function aliases.

Cc; York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:30:45 -08:00
Tom Rini
68ae7772af arm: ls1021atwr: Rework local commands to not be included in SPL
Move some of the code for the "lane_bank" and "cpld" code local
commands so that they are not built for SPL as they can only be
used in full U-Boot.  This means we can mark a few functions as
static as well now.

Cc: Alison Wang <alison.wang@freescale.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Alison Wang <alison.wang@nxp.com>
Tested-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:24 -08:00
Tom Rini
3a72a0efcc powerpc: P1010RDB: Rework local command to not be included in SPL
Add a CONFIG_SPL_BUILD guard around the code for the "mux" command so
it is not included in SPL.

Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Reviewed-by: Qiang Zhao <qiang.zhao@nxp.com>
2018-01-15 12:44:24 -08:00
Priyanka Jain
da28a03ed4 board/ls2081ard: Correct code to get QMAP value in checkboard
QMAP value contains information about QSPI chip-selects. These bits
are used to display information of boot device in checkboard()
function.

QMAP value is stored in most significant 3-bits of 8-bit register
brdcfg[0] in Qixis, this patch corrects code to get QMAP bits using
below logic:
	(brdcfg[0] >> 5) & 0x7

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:23 -08:00
Priyanka Jain
f436fbfeb1 board/ls2081ardb: Update board related prints
Remove Board Arch print as its value is always constant '1' and does
not contain any important information to display during boot.
Add print to display Board FPGA version.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:23 -08:00
Sumit Garg
86c773fe83 configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
As part of chain of trust with confidentiality along with distro
boot, linux kernel image needs to be stored in encrypted form on
ext4 boot partition. So enable CONFIG_CMD_EXT4_WRITE in case of
Secure boot on ARM based platforms.

Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 12:44:23 -08:00
Bhaskar Upadhaya
b0ce187b1f board: ls1012a: LS1012A-2G5RDB board support
LS1012A-2G5RDB belongs to LS1012A family with features 2 2.5G SGMII
PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-15 11:56:33 -08:00
Fabio Estevam
0f194018f2 mx6memcal: spl: Disambiguate the error message
Currently mmdc_do_dqs_calibration() and mmdc_do_write_level_calibration()
show the same error message, which is confusing for debugging.

Disambiguate the mmdc_do_dqs_calibration() error message.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Fabio Estevam
941fcabfa7 mx6memcal: spl: Also take i.MX6ULL into account
i.MX6ULL also does not support 64-bit DDR bus, so add it to the
check logic.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Fabio Estevam
db00e921fd mx6memcal: Fix the UART ports for mx6sabresd/auto boards
mx6sabresd board uses the following pins for console:

PAD_CSI0_DAT10__UART1_TX_DATA
PAD_CSI0_DAT11__UART1_RX_DATA

,so put it in the same config option as wandboard.

mx6sabreauto board uses the following pins for console:

PAD_KEY_COL0__UART4_TX_DATA
PAD_KEY_ROW0__UART4_RX_DATA

So do not mention sabreauto board as part of the UART1_SD3_DAT6_7 option.

The config option for sabreauto can be added later when needed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
e80f9e1a37 imx: mx6sxsabresd: config wdog pinmux
Because kernel set WDOG_B mux before pad with the common pinctrl
framwork now and wdog reset will be triggered once set WDOG_B mux
with default pad setting, we set pad setting here to workaround this.
Since imx_iomux_v3_setup_pad also set mux before pad setting, we set
as GPIO mux firstly here to workaround it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
5dfc9d3766 imx: mx6sxsabresd: Enable DM driver
Enable I2C/MMC/GPIO/REGUALTOR/PMIC/USB DM drivers.
There are some dependency, such as when DM MMC enabled, USB compile error.
Also the i.MX I2C MMC DM driver does not support legacy GPIO interface.
So enable them all together.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00
Peng Fan
f8e450a7f6 board: freescale: common: add pfuze dm code
Add pfuze dm code, this code could be enabled with CONFIG_DM_PMIC_PFUZE100.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-12 14:28:04 +01:00