Commit graph

61817 commits

Author SHA1 Message Date
Heinrich Schuchardt
37db55b7e9 linux/types.h: fix typo unchar
unsigned char should be called uchar and not unchar.

This fixes a build error in lib/crypto/x509_cert_parser.c.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-09 10:35:30 -05:00
Tom Rini
2f02845817 Fixes for 2020.01
-----------------
 
 - imx8qxp_mek: increase buffer sizes and args number
 - Fixes for imx7ulp
 - imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
 - colibri_imx7: reserve DDR memory for Cortex-M4
 - vining2000: fixes and convert to ethernet DM
 - imx8m: fix rom version check to unbreak some B0 chips
 - tbs2910: Disable VxWorks image booting support
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl3uLqsPHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3YEEL/jAKMnREGNHCjvwvxkVVZ7sWHeRtqh+OXb8V
 VnZB0glptth1NDxWyHFZkcsVqjpRlUsm3/lA91xaFXcUB8EWnJMKVReHkB7v0bZW
 zHziN0rNPoTBVocRlpgPXt3zeSOR3Qg+rFesg4zmlXNIVPyvBanpDCxXDK60gdIi
 JDrAdIarP0UMK0roIFLIyvnJ+J/ib1ky1aJI8cdktXb+nSyVrMw5VDdmSBtTCp10
 6o/fJGtWfzXp59a8y9XnnVxNsU2c0URcsswub4fvWhhwJ86xiWGSEfm5Sybql6kS
 6PYjB7jGmdWJjYug7rFthl1Hnn1FULIH9qrxPePtD2ooUUjHPlDmElQqWkHoVlib
 yUAlWG87ZdjhmEMR1iSFlkcBpOD7SlmcvfYZdeedCdtzTwW0kj6lcX9fUKHE+17e
 3SJQtPxpMrVfnUDRn0ciAbwg8+1Tow6sv39j6iYi7jAITny9q16ErdRGup0wB19Y
 tZkmRdnhtjCalrfDoEaRGXZJDE15XQ==
 =L2zo
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20191209' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

Fixes for 2020.01
-----------------

- imx8qxp_mek: increase buffer sizes and args number
- Fixes for imx7ulp
- imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
- colibri_imx7: reserve DDR memory for Cortex-M4
- vining2000: fixes and convert to ethernet DM
- imx8m: fix rom version check to unbreak some B0 chips
- tbs2910: Disable VxWorks image booting support
2019-12-09 10:32:08 -05:00
Patrick Wildt
6a4b07e086 imx8m: fix rom version check to unbreak some B0 chips
Recently the version check was improved to be able to determine that
we're running on SoC revision 2.1.  A check for B0 was tightened so
that it now must equal 0x20 instead of being bigger than 0x20.  On
some B0 chips the value returned is 0x1020 instead of 0x20.  This
means even though it's B0, the check will fail and code relying on
the correct chip revision will make wrong decisions.  There is no
documentation of those bits, but it seems that NXP always uses a
byte to encode the revision.  Thus remove the upper bits to fix the
regression.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
2019-12-09 11:52:06 +01:00
Tom Rini
b38c3a641f Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- 16-bit start up codes clean up
2019-12-08 10:51:00 -05:00
Masahiro Yamada
90ab311a7c x86: simplify ljmp to 32-bit code
You can directly specify the label as the operand for ljmp.

This commit saves 4-byte code.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: fixed the gas warning]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-08 19:10:21 +08:00
Masahiro Yamada
0d915a9aa4 x86: use data32 directive instead of macro for operand-size prefix
This file defines 'a32' and 'o32' macros to avoid magic numbers
of operand/address-size prefixing.

GAS supports 'data32' and 'addr32' for that purpose.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-08 19:10:12 +08:00
Tom Rini
d79ae6aa30 Merge branch '2019-12-06-master-imports'
- Allow for the sysboot command, which is used to parse extlinux.conf
  files to be used without PXE support.  There is no functional change
  here aside from fixing distro boot in a few cases where we actually
  lacked the ability to parse the extlinux.conf file
- Add the x509/pkcs7 parsers from Linux, a pre-requisite to EFI Secure
  Boot support.
2019-12-06 16:45:46 -05:00
Tom Rini
fb013eee68 Makefile: Ensure tools directory exists in output prior to use
With the change to make tools/version.h a file we need to make sure that
the output directory exists first otherwise we will get a build failure.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 4d90f6cd98 ("tools: Avoid creating symbolic links for tools/version.h")
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-12-06 16:45:32 -05:00
AKASHI Takahiro
f523400f60 test: add asn1 unit test
This test will exercise asn1 compiler as well as asn1 decoder functions
via various parsers.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
e85a787c7d lib: crypto: add pkcs7 message parser
Imported from linux kernel v5.3:
 pkcs7.asn1 without changes
 pkcs7.h with changes marked as __UBOOT__
 pkcs7_parser.h without changes
 pkcs7_parser.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
b4adf627d5 lib: crypto: add x509 parser
Imported from linux kernel v5.3:
 x509.asn1 without changes
 x509_akid.asn1 without changes
 x509_parser.h without changes
 x509_cert_parser.c with changes marked as __UBOOT__
 x509_public_key.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
9b933bf6f4 lib: crypto: add rsa public key parser
Imported from linux kernel v5.3:
rsapubkey.asn1 without changes
rsa.h without changes
rsa_helper.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
c4e961ecec lib: crypto: add public key utility
Imported from linux kernel v5.3:
 asymmetric-type.h with changes marked as __UBOOT__
 asymmetric_type.c with changes marked as __UBOOT__
 public_key.h with changes marked as __UBOOT__
 public_key.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
a9b45e6e83 lib: add oid registry utility
Imported from linux kernel v5.3:
 build_OID_registry without changes
 oid_registry.h without changes
 oid_registry.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
e2c04fafc8 doc: add README for asn1 compiler and decoder
This document gives a brief description about ASN1 compiler as well as
ASN1 decoder.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
ab8a0e069d lib: add asn1 decoder
Imported from linux kernel v5.3:
 lib/asn1_decoder.c with changes marked as __UBOOT__

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
ed3dead9b7 Makefile: add build script for asn1 parsers
This rule will be used to build x509 and pkcs7 parsers.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
2b12196dc1 cmd: add asn1_compiler
Imported from linux kernel v5.3:
 asn1.h without changes
 asn1_ber_bytecode.h without changes
 asn1_decoder.h without changes
 asn1_compiler.c without changes

This host command will be used to create a ASN1 parser, for example,
for pkcs7 messages or x509 certificates. More specifically, it will
generate *byte code* which will be interpreted by asn1 decoder library.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-06 16:44:20 -05:00
AKASHI Takahiro
bd3c3dd7fb linux/time.h: include vsprintf.h
Without this commit, time.h possibly causes a build error as
asctime_r() uses sprintf().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
29852bfc22 include: kernel.h: include printk.h
Adding "printk.h" will help improve portability from linux kernel
code (in my case, lib/asn1_decoder.c and others) where printf and
pr_* variant functions are used.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
1872311727 lib: add mktime64() for linux compatibility
This function will be used  in lib/crypto/x509_cert_parser.c, which
will also be imported from linux code in a later commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
05429b6cf5 rtc: move date.c from drivers/rtc/ to lib/
In the next commit, rtc_mktime(), for compatibility with linux, will be
implemented using rtc_mktime(), which is no longer drivers/rtc specific.
So move this file under lib/.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
09030e0361 rtc.h: add struct udevice declaration
Without this change, including rtc.h solely will cause a build error.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-12-06 16:44:19 -05:00
AKASHI Takahiro
4839e86892 linux_compat: move kmemdup() from ubifs.c to linux_compat.c
linux_compat.c is the best place for kmemdup(), which is currenly used
only in ubifs.c, but will also be used when other kernel files
(in my case, lib/crypto/x509_cert_parser.c and pkcs7_parser.c) will be
imported. So just move it.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-06 16:44:19 -05:00
Patrice Chotard
31839dc2d2 cmd: pxe: Fix checkpatch WARNING/CHECK
Fix checkpatch WARNING and CHECK issues

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:19 -05:00
Patrice Chotard
51843eaba6 cmd: sysboot: Fix checkpatch WARNING/CHECK
Fix checkpatch WARNING and CHECK issues

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:19 -05:00
Patrice Chotard
8cb22a66a7 cmd: pxe_utils: Fix checkpatch WARNING/CHECK
Fix checkpatch WARNING and CHECK issues

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:19 -05:00
Patrice Chotard
993c912d30 cmd: sysboot: Create a sysboot command dedicated file
Extract all sysboot command related code from pxe.c to new sysboot.c
Update Kconfig to insure that DISTRO_DEFAULT select new CMD_SYSBOOT
command.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:18 -05:00
Patrice Chotard
2373cba3d2 cmd: Prepare sysboot command independence
As sysboot and pxe commands are sharing piece of code, migrate this
common code into a new file pxe_utils.c to prepare sysboot command
code extraction from pxe.c

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:18 -05:00
Patrice Chotard
1ac2cb9741 cmd: Migrate from_env() from pxe.c to nvedit.c
Migrate from_env() from pxe.c to nvedit.c as it's not pxe specific.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-12-06 16:44:18 -05:00
Tom Rini
bead4f2f2c Merge tag 'u-boot-rockchip-20191206' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- rockchip pwm driver update to support all the SoCs
- RK3308 GMAC and pinctrl support
- More UART interface support on PX30 and pmugrf reg fix
- Fixup on misc for eth_addr/serial#
- Other updates on variant SoCs
2019-12-06 10:35:18 -05:00
Tom Rini
edbb8e0918 Revert "spl: fix entry_point equal to load_addr"
Due to the (seemingly bogus) assumption of a default
CONFIG_SYS_UBOOT_START value we will revert this change for now and
evaluate it again for the next release along with changes to
CONFIG_SYS_UBOOT_START.

This reverts commit d3e97b53c1.

Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-06 09:56:03 -05:00
Anatolij Gustschin
5c1c7c1ef8 imx: imx8qxp_mek: increase buffer sizes and args number
The default value of CONFIG_SYS_CBSIZE is too small when we need
to input long commands or when using long kernel command line.

The default value of CONFIG_SYS_MAXARGS is too small to add a long
command line, and the kernel might not boot as intended without the
complete bootargs. Increase argument buffer sizes and the number of
arguments.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-12-06 13:57:42 +01:00
Frieder Schrempf
f5edb0d86d clk: imx: imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
The 24MHz oscillator clock is referenced by "clock-osc-24m" and not
"osc_24m".

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-12-06 13:57:42 +01:00
Marek Vasut
ed22a88385 ARM: imx: vining2000: Align SOC and ARM LDO voltages
The board has both VDD_SOC_IN and VDD_ARM_IN rails connected to the same
PMIC rail, align the LDO voltages to avoid leaking inside the MX6SX SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
edaec53212 ARM: imx: vining2000: Repair PCIe support
Ever since the conversion to DM PCI, the board was missing the PCIe DT
nodes, hence the PCI did not really work. Fill in the DT nodes and add
missing PCIe device reset.

Moreover, bring the PCIe power domain up before booting Linux. This is
mandatory to keep old broken vendor kernels working, as they do not do
so and depend on the bootloader to bring the power domain up.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
b6b6c1d7bd ARM: imx: vining2000: Enable fitImage support
The fitImage support was enabled in the downstream U-Boot port and the
kernel images on the device are fitImage, yet this functionality is not
enabled in mainline U-Boot. Enable it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
26822fd23c ARM: imx: vining2000: Convert to ethernet DM
Convert the board to ethernet DM support. Adjust board file accordingly,
as the board_eth_init() contains custom clock configuration required for
this board to work. Furthermore, enable FEC1 clock to make FEC1 work as
well.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
5b97abab55 ARM: imx: vining2000: Enable DDR DRAM calibration
Enable DRAM calibration in SPL to improve behavior of the board
in edge conditions of the thermal envelope of the board and make
it even more stable.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
7d84f4469f ARM: imx: vining2000: Convert to SPL framework
In preparation for use of DDR DRAM fine-tuning upon boot,
convert the board to SPL framework instead of using DCD
tables to bring up DRAM and pinmux.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Silvio Fricke <silvio.fricke@softing.com>
Cc: Stefano Babic <sbabic@denx.de>
2019-12-06 13:57:42 +01:00
Marek Vasut
df1b721f60 ARM: mx6: pmu: Expose PMU LDO configuration interface
Make the PMU LDO configuration interface available to board code,
so that board code can reconfigure the internal LDOs of the SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Eric Nelson <eric@nelint.com>
2019-12-06 13:57:42 +01:00
Igor Opaniuk
c671d8af0b board: colibri_imx7: reserve DDR memory for Cortex-M4
i.MX 7's Cortex-M4 core can run from DDR and uses DDR memory for
the rpmsg communication. Both use cases need a fixed location of
memory reserved. For the rpmsg use case the reserved area needs
to be in sync with the kernel's hardcoded vring descriptor location.

Use the linux,usable-memory property to carve out 1MB of memory
in case the M4 core is running. Also make sure that the i.MX 7
specific rpmsg driver does not get loaded in case we do not carve
out memory.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-12-06 12:09:30 +01:00
Igor Opaniuk
949b5a969d common: fdt_support: add support for setting usable memory
Add support for setting linux,usable-memory property in the memory
node of device tree for the kernel [1].

This property holds a base address and size, describing a
limited region in which memory may be considered available for use by
the kernel. Memory outside of this range is not available for use.

[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/chosen.txt

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-12-06 12:09:25 +01:00
Fabio Estevam
1fae23899c warp7: Fix U-Boot corruption after saving the environment
U-Boot binary has grown in such a way that it goes beyond the reserved
area for the environment variables.

Running "saveenv" followed by a "reset" causes U-Boot to hang because
of this overlap.

Fix this problem by increasing the CONFIG_ENV_OFFSET size.

Also, in order to prevent this same problem in the future, use
CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.

CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare
CONFIG_ENV_OFFSET with its direct value instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Acked-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-12-06 12:09:25 +01:00
Fabio Estevam
d396f1384c mx6: Allow configuring the NoC registers on i.MX6QP
The NoC registers on i.MX6QP needs to be configured, otherwise some
usecases in the kernel behave incorrectly, such as rotation and resize.

Currently the NoC registers are not configured in the kernel, so
configure them in U-Boot like it is done in the NXP U-Boot tree.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2019-12-06 12:09:25 +01:00
Fabio Estevam
87970cda6f mx6cuboxi: Add Baruch as maintainer
Add Baruch Siach as a mx6cuboxi maintainer.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
2019-12-06 12:05:08 +01:00
Fabio Estevam
2d4b87f867 mx7ulp: Sync the device tree related files
Sync the mx7ulp device tree related files with the one from
NXP U-Boot vendor tree (imx_v2019.04_4.19.35_1.0.0).

The mainline support for i.MX7ULP is very premature at this stage.

We should probably re-sync with mainline Linux dts when it gets
in better shape, but for now sync with the U-Boot vendor code.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-06 12:05:08 +01:00
Fabio Estevam
d136eb9bfe mx7ulp: scg: Remove unnused scg_a7_apll_init()
scg_a7_apll_init() is not called anywhere, so remove such dead code

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-06 12:05:08 +01:00
Fabio Estevam
0619af0942 mx7ulp: Remove the _RUN notation from the PMC1 LDOVL definitions
The LDOVL definitions is common to all the modes, not only RUN mode,
so in order to avoid confusion, remove the _RUN notation from the PMC1
LDOVL definitions.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-06 12:05:08 +01:00
Fabio Estevam
b8cabb0e3d mx7ulp: Introduce the CONFIG_LDO_ENABLED_MODE option
Introduce the CONFIG_LDO_ENABLED_MODE option so that i.MX7ULP boards
designed to operate with LDO enabled mode can work with 0.95V at LDO
output in RUN mode as per the datasheet.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-12-06 12:05:08 +01:00