Commit graph

9 commits

Author SHA1 Message Date
Tom Rix
7a2aa8b681 OMAP3 Move cache routine to cache.S
v7_flush_dcache_all, because it depends on omap ROM code is not
generic.  Rename the function to 'invalidate_dcache' and move it
to the omap cpu directory.

Collect the other omap cache routines l2_cache_enable and
l2_cache_disable with invalide_dcache into cache.S.  This
means removing the old cache.c file that contained l2_cache_enable
and l2_cache_disable.

The conversion from cache.c to cache.S was done most through
disassembling the uboot binary.  The only significant change was
to change the comparision for the return of get_cpu_rev from

   cmp	r0, #0
   beq	earlier_than_label

Which was lost information to

   cmp	r0, #CPU_3XX_ES20
   blt	earlier_than_label

The paths through the enable routine were verified by
adding an infinite loop and seeing the hang.  Then
removing the infinite loop and seeing it continue.

The disable routine is similar enough that it was not
tested with this method.

Run tested by cold booting from nand on beagle and zoom1.
Compile tested on MAKEALL arm.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-10-13 06:17:33 -05:00
Dirk Behme
97a099eaa4 omap3: remove typedefs for configuration structs
Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-08-08 11:33:23 +02:00
Tom Rix
549b98306d OMAP3 Remove twl4030 defines
These defines have been subplanted by the equivelent defines in
include/twl4030.h

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Heiko Schocher <hs@denx.de>
2009-07-29 09:57:45 +02:00
Sanjeev Premi
cba0b778dd OMAP3: Print correct silicon revision
The function display_board_info() displays incorrect
silicon revision - based on the return value from
function get_cpu_rev().

This patch fixes the problem.

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-04-29 21:11:49 +02:00
Sanjeev Premi
90006e9b33 OMAP3: Remove unused board-types
The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.

This patch removes all uses of board-type, related definitions
and functions.

Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-04-29 21:11:40 +02:00
Dirk Behme
e6a6a70415 OMAP3: Add support for OMAP3 die ID
Read and store OMAP3 die ID in U-Boot environment.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-03-13 23:17:43 +01:00
Dirk Behme
aba45c85b2 OMAP3: Clean up MMC code
Clean up OMAP3 MMC code:

* Convert register access to struct & readx/writex style
* Replace hardcode values by macros
* Remove macro defined twice

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-02-22 18:29:10 +01:00
Dirk Behme
f956fd0338 OMAP3: Beagle: Add board revision detection
With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
which might need different software handling. For this, GPIO pin 171 (GPIO
module 6, offset 11) can be used to check for board revision. If this pin
is low, we have a rev C board. Else it must be a revision Ax or Bx board.

To handle board differences you can call function beagle_get_revision().
E.g.:

if (beagle_get_revision()) {

/* do special revision C stuff here */

}

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-02-22 18:29:10 +01:00
Dirk Behme
a8b6450546 OMAP3: Add OMAP3, memory and function prototype headers
Add OMAP3, memory and function prototype header files for OMAP3.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-01-24 17:51:20 +01:00