Commit 19a91f2464 ("Create a new boot/ directory") moved the
android_ab.c code under boot/android_ab but did not update
the MAINTAINERS entry.
Update it so that the maintainer will get cc'ed again.
Fixes: 19a91f2464 ("Create a new boot/ directory")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
main_timer0 is used by u-boot as the tick-timer. Add it to the soc
devices list so it an be enabled via the k3 power controller.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Bryan Brattlof <bb@ti.com> says:
Hello Again Everyone!
This series gets the am65x booting again along with syncing the device
tree files with v6.7-rc1 Linux.
The bulk of these patches unify the WKUP SPL board file with the arm64
files to make future syncs from Linux much easier. In the end the DTBs
should look a lot like what the DTBs look like for the am64x which
is fairly similar to the am65x.
For those interested in what UART boot looks like:
https://paste.sr.ht/~bryanb/7df8a645dc548912cd806abd5ecab967ef3287bc
Many nodes are reused between WKUP SPL, MAIN SPL, and U-Boot. Using
bootph-pre-ram is causing these nodes to be present in SPL builds but
pruned away during the U-Boot build. Convert these nodes to bootph-all
so they will remain no matter which dtb build is happening.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate mcu secure proxy node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
The dummy_clock node is used to help the drivers probe the IO needed to
setup consoles and boot media to load firmware into the SoC.
This dummy_clock isn't a device that exists nor does it exist in the
mcu domain. So move it from cbass_mcu to the root node to avoid any
confusion.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
These aliases are not needed in U-Boot. Remove them
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we have duplicate
properties in the root node. Remove them
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate vtt_pinmux node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate mdio node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
The pinmux for usb0 is missing from the Linux board dtb file. Remove it
until we can introduce it in Linux
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate ospi0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate wkup_i2c0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate sdhci1 pinmux node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have
a duplicate sdhci0 pinmux node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate main_uart0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified we now have a
duplicate mcu_uart0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Ethernet is one of a few IPs in U-Boot that depend on DMA to operate.
However there are a few missing registers ranges in the udmap nodes
need to properly setup DMA for the am65x.
A fix has been added to the Linux kernel[0] to add these ranges however
they have not made it to a Linux tag. To keep DMA operational until the
next DT sync from Linux, add these ranges to the *-u-boot.dtsi with a
note for our future selves.
[0] https://lore.kernel.org/r/20231213135138.929517-2-vigneshr@ti.com
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate mcu_udmap node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified, we now have a
duplicate mcu_ringacc node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
timer1 is really just the mcu_timer0 node redefined for the WKUP SPL.
Remove the timer1 and replace it with the mcu_timer0 from the Linux
device tree we imported into U-Boot.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board files unified, we now have a duplicate
wkup_uart0 node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
With the Linux and U-Boot board dtb files unified we now have a
duplicate vtt_supply node. Remove it
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
To make things as organized as possible, start from the Linux board dtbs
and apply all properties needed for U-Boot in our *-u-boot.dtsi file for
the MAIN SPL and U-Boot builds.
We can then include these files for the WKUP SPL build making further
edits to the needed properties and nodes for the WKUP SPL bootloader's
view of the am65x.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
In order to unify the R5 board dtb file with the Linux board dtb file,
we will need to copy all bootph-pre-ram properties to the *-u-boot.dtsi
overlay.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Pull in dtb updates for the am654 base board from v6.7-rc1 of Linux
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
The R5 board file for U-Boot should be the same as the board file copied
from Linux with a few alterations to work with the R5's view of the SoC.
First we need to unify the R5 board file and it's U-Boot overlay before
we can unify the Linux board file with this one.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
We do not have a need to share a single console with the evaluation
board and disabling this option reduces the complexity of configuring
the consoles. Disable CONSOLE_MUX
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Some of the regulators we need to successfully boot are fixed
regulators. Enable the driver to properly probe them.
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
TEGRA114_CLK_MIPI_CAL is a fixed child of PLLP and is used
as clock source of the MIPI PHY calibration mechanism.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Recently, the U-Boot installation process has changed significantly.
This should be depicted in documentation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
align bloblist with v0.9 of Firmware Handoff spec
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmWS9jwRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreZvYggAnc11fzAPnWZK5Nz7RxqoT1vMl/xAaSMJ
gKaL8V0vAY7I0s3+jMoEfed29OAIkxs68nfEV0Hu4RKc2ER6gIYjun5VOP8G6B9j
B1S/IbWgMtz+Vn/TQNy72zbWcU/FeypU2ZICAEN7v1hksjZoM7jbytLa/OkPjSA1
ONEIZTwYL+pXFSneAcXU1cugQX2RO+L5gYNlZF8yv6Jb5DQj0noOvhbvW1s9XvF3
VognW1UVDmBr0KPaJVufMm0YGaurwsjeb7SaKzgk/9CUY+j6AqpfqqBaK6+KoPku
MOjyc7shsxmJsBiLVflzSVE7WAvlTcRN6hLzoJd/4JVs+/fazz9P1A==
=b5aT
-----END PGP SIGNATURE-----
Merge tag 'dm-next-1124' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
support propagating supernode properties with bootph schema
align bloblist with v0.9 of Firmware Handoff spec
Align the documentation with the v0.9 spec.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Allow the alignment to be specified when creating a bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The v0.9 spec provides for a 24-byte header. Update the implementation
to match this.
Rename the fields of the bloblist header to align to the spec.
Adds an alignment field into the bloblist header.
Update the related bloblist APIs and UT testcases.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The v0.9 spec provides for an 8-byte header for each blob, with fewer
fields.
The blob data start address should be aligned to the alignment specified
by the bloblist header.
Update the implementation to match this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Rather than setting the alignment using the header size, add an entirely
new entry to cover the gap left by the alignment.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use a sinple 8-bit checksum for bloblist, as specified by the spec
version 0.9.
Spec v0.9 specifies that the entire bloblist area is checksummed,
including unused portions. Update the code to follow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Drop spare value from bloblist record header.
For now it is still present in the header, with an underscore, so that
tests continue to pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Convert accesses to tag and hdr_size via function for grouping tag and
hdr_size together later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The new bloblist for v0.9 has version 1 so update this value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This uses a new value with spec v0.9 so change it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The updated bloblist structure stores the alignment as a power-of-two
value in its structures. Adjust the API to use this, to avoid needing to
calling ilog2().
Update the bloblist alignment from 16 bytes to 8 bytes.
Drop a stale comment while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Align bloblist tags with the FW handoff spec v0.9.
The most common ones are from 0.
TF related ones are from 0x100.
All non-standard ones from 0xfff000.
Added new defined tags:
BLOBLISTT_OPTEE_PAGABLE_PART for TF.
BLOBLISTT_TPM_EVLOG and BLOBLISTT_TPM_CRB_BASE for TPM.
Signed-off-by: Simon Glass <sjg@chromium.org>
Co-developed-by: Raymond Mao <raymond.mao@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use this flag so that the bootph binding is obeyed correctly.
Add a comment about what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/12
Reviewed-by: Tom Rini <trini@konsulko.com>
