Commit graph

64 commits

Author SHA1 Message Date
Tang Yuantian
3067547502 powerpc/mpc85xx: Make boot flag effective
bootflag as a parameter is passed to board_init_f().
But it is not actually used in this function.
Make it effective by assigned it to gd->flags.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-12 12:26:47 -07:00
Boschung, Rainer
919e05520f powerpc: mpc85xx watchdog init added to init_func
When CONFIG_WATCHDOG is defined the board initialization just performs
a WATCHDOG_RESET, an initialization of the watchdog is not done.
This has been modified fot the MPC85xx, the board initialization calls
its watchdog initialitzation allowing for full watchdog configuration
very early in the boot phase.

Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01 14:18:28 -07:00
Tang Yuantian
7cb7272365 mpc85xx/t104x: Enable L2 and CPC cache when resume
When resume from deep sleep, uboot needs to enable L2 and CPC
cache, or they would be keeping unusable in kernel because
kernel didn't enble or initialized them.
This patch didn't change the existing L2 cache enabling code,
just put them in a function.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-07-22 16:25:55 -07:00
Simon Glass
9272a9b4f6 m68k: powerpc: Clean up do_mdm_init
This code seems unnecessarily complex. We really just need to check the
global_data. Now that is it all in one place, and not arch-specific, this
is pretty easy.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:49:33 -04:00
Masahiro Yamada
8e2615752e bd_info: remove bi_barudrate member from struct bd_info
gd->bd->bi_baudrate is a copy of gd->baudrate.

Since baudrate is a common feature for all architectures,
keep gd->baudrate only.

It is true that bi_baudrate was passed to the kernel in that structure
but it was a long time ago.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu> (For microblaze)
2014-05-12 15:19:45 -04:00
Tang Yuantian
aade20046b mpc85xx/t104x: Add deep sleep framework support
When T104x soc wakes up from deep sleep, control is passed to the
primary core that starts executing uboot. After re-initialized some
IP blocks, like DDRC, kernel will take responsibility to continue
to restore environment it leaves before.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:49 -07:00
Masahiro Yamada
58dac32764 powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260
Before this commit, CONFIG_MPC8260 and CONFIG_8260
were used mixed-up.

All boards with mpc8260 cpu defined both of them:
  - CONFIG_MPC8260 was defined in board config headers
      and include/common.h
  - CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk

We do not need to have both of them.
This commit keeps only CONFIG_MPC8260.

This commit does:
 - Delete CONFIG_8260 and CONFIG_MPC8260 definition
   in config headers and include/common.h
 - Rename CONFIG_8260 to CONFIG_MPC8260
    in arch/powerpc/cpu/mpc8260/config.mk.
 - Rename #ifdef CONFIG_8260 to #ifdef CONFIG_MPC8260

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
2014-03-07 10:59:06 -05:00
York Sun
e38661634b common: Add get_effective_memsize() to memsize.c
This function has been around for powerpc. It is used for systems with
memory more than CONFIG_MAX_MEM_MAPPED. In case of non-contiguous memory,
this feature can limit U-boot to one block without going over the limit.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2014-02-21 11:06:13 -05:00
Valentin Longchamp
13287e3d47 powerpc: cast bi_memsize to ulong for %ld usage
When exporting the new memsize without reserved PRAM area, the -Wformat
option produces a warning since %ld is used for snprintf and bi_memsize
is phys_size_t.

This patch removes this warning for all PRAM PowerPC boards.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2013-10-24 09:35:15 -07:00
Tom Rini
c2120fbfbc Merge branch 'master' of git://git.denx.de/u-boot-i2c
The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.

Conflicts:
	board/sandburst/common/ppc440gx_i2c.c
	board/sandburst/common/ppc440gx_i2c.h

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:50:24 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Heiko Schocher
ea818dbbcd i2c, soft-i2c: switch to new multibus/multiadapter support
- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2013-07-23 05:54:29 +02:00
Heiko Schocher
3f4978c713 i2c: common changes for multibus/multiadapter support
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Cc: Henrik Nordström <henrik@henriknordstrom.net>
2013-07-23 05:54:28 +02:00
Wolfgang Denk
d6ed322222 Power: remove support for Freescale MPC8220
The Freescale MPC8220 Power Architecture processors have long reached
EOL; Freescale does not even list these any more on their web site.

Remove the code to avoid wasting maitaining efforts on dead stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
2013-05-15 08:41:03 -04:00
Andreas Bießmann
d2eae43ba8 lib: consolidate hang()
Delete all occurrences of hang() and provide a generic function.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
[trini: Modify check around puts() in hang.c slightly]
Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01 16:41:08 -04:00
Simon Glass
6f6430d72b Introduce generic post-relocation board_r.c
This file handles common post-relocation init for boards which use
the generic framework.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15 16:13:59 -04:00
Simon Glass
a6741bce50 Declare watchdog functions in watchdog.h
These functions are only available for powerpc and are not declared in a
header file. We want to use the rest function in two places (board_f and
board_r), so declare the functions in watchdog.h.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15 16:13:59 -04:00
Simon Glass
3929fb0a14 Replace __bss_end__ with __bss_end
Note this is a tree-wide change affecting multiple architectures.

At present we use __bss_start, but mostly __bss_end__. This seems
inconsistent and in a number of places __bss_end is used instead.

Change to use __bss_end for the BSS end symbol throughout U-Boot. This
makes it possible to use the asm-generic/sections.h file on all
archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15 16:13:54 -04:00
Simon Glass
1c356135fa ppc: Move mpc8220 clocks to arch_global_data
Move these fields into arch_global_data and tidy up. The bExtUart field
does not appear to be used, so punt it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-04 09:05:43 -05:00
Simon Glass
fefb098b18 ppc: Move mpc512x clocks to arch_global_data
Move ips_clk and csb_clk into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-04 09:05:43 -05:00
Simon Glass
b28774966c ppc: Move mpc5xxx clocks to arch_global_data
Move ipb_clk and pci_clk into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-04 09:05:43 -05:00
Simon Glass
67ac13b1b9 ppc: Move lbc_clk and cpu to arch_global_data
Move these fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Update for bsc9132qds.c, b4860qds.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-02-04 09:04:57 -05:00
Simon Glass
748cd0591a ppc: Move clock fields to arch_global_data
Move vco_out, cpm_clk, scc_clk, brg_clk into arch_global_data and tidy
up. Leave pci_clk on its own since this should really depend only on
CONFIG_PCI and not any particular chip type.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-01 15:42:45 -05:00
Simon Glass
1206c18403 ppc: Move brg_clk to arch_global_data
Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-02-01 15:42:45 -05:00
Joe Hershberger
ec8a252cd4 env: Use getenv_yesno() more generally
Move the getenv_yesno() to env_common.c and change most checks for
'y' or 'n' to use this helper.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-12-13 11:46:55 -07:00
Kim Phillips
20051f2ab2 arch/powerpc/lib/board.c, *traps.c: sparse fixes
traps.c:*:1: warning: symbol 'print_backtrace' was not declared. Should it be static?
traps.c:93:1: warning: symbol '_exception' was not declared. Should it be static?
board.c:166:6: warning: symbol '__board_add_ram_info' was not declared. Should it be static?
board.c:174:5: warning: symbol '__board_flash_wp_on' was not declared. Should it be static?
board.c:187:6: warning: symbol '__cpu_secondary_init_r' was not declared. Should it be static?
board.c:265:12: warning: symbol 'init_sequence' was not declared. Should it be static?
board.c:348:5: warning: symbol '__fixup_cpu' was not declared. Should it be static?
board.c:405:53: warning: Using plain integer as NULL pointer

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-11-04 11:00:35 -07:00
York Sun
eb53941206 powerpc/mpc85xx: software workaround for DDR erratum A-004468
Boot space translation utilizes the pre-translation address to select
the DDR controller target. However, the post-translation address will be
presented to the selected DDR controller. It is possible that the pre-
translation address selects one DDR controller but the post-translation
address exists in a different DDR controller when using certain DDR
controller interleaving modes. The device may fail to boot under these
circumstances. Note that a DDR MSE error will not be detected since DDR
controller bounds registers are programmed to be the same when configured
for DDR controller interleaving.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-22 14:31:28 -05:00
Marek Vasut
036036d79c serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
York Sun
123bd96d53 powerpc/mpc8xxx: use topology registers to calculate number of cores
We have actual topology infomation to find out exactly which core is present.
Calculate the number of cores if not specified.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-23 12:16:54 -05:00
Joakim Tjernlund
7de8a7169e powerpc: Stack Pointer not properly aligned
The code first aligns the SP to 16 then subtract 8, making it
8 bytes aligned. Furthermore the initial stack frame not
quite correct either.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-08-22 16:07:42 -05:00
Mike Frysinger
de30122bb5 net: move bootfile init into eth_initialize
All arches init this the same way, so move the logic into the core
net code to avoid duplicating it everywhere else.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:33 -05:00
Mike Frysinger
50a47d0523 net: punt bd->bi_ip_addr
This field gets read in one place (by "bdinfo"), and we can replace
that with getenv("ipaddr").  After all, the bi_ip_addr field is kept
up-to-date implicitly with the value of the ipaddr env var.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:05 -05:00
Simon Glass
770605e4f9 bootstage: Replace show_boot_progress/error() with bootstage_...()
These calls should not be made directly any more, since bootstage
will call the show_boot_...() functions as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:41:39 +01:00
Simon Glass
8ade950638 bootstage: Convert progress numbers 20-41 to enums
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-18 21:16:22 +01:00
Simon Glass
5ddb118da4 bootstage: Use show_boot_error() for -ve progress numbers
Rather than the caller negating our progress numbers to indicate an
error has occurred, which seems hacky, add a function to indicate this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-18 20:56:00 +01:00
Simon Glass
d01b17611b ppc: Change memsz variable to signed char
This seems to be unsigned char for no good reason. Tidy this up and
remove the casts.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2012-03-03 16:56:51 +01:00
Wolfgang Denk
1c2931d4ec arch/powerpc/lib/board.c: fix build warning
Fix:
board.c: In function 'board_init_r':
board.c:633:8: warning: unused variable 's' [-Wunused-variable]

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07 22:09:35 +01:00
Wolfgang Denk
9b998b0c52 arch/powerpc/lib/board.c: make (mostly) checkpatch-clean
CodingStyle cleanup.

Accepted (in this cleanup) checkpatch messages:

- externs should be avoided
  (to be cleaned up later)
- no spaces at the start of a line
  (accepted in multi-line #if's)
- Macros with complex values
  (false reports)
- do not use assignment in if condition
  (accepted in one place, where avoiding it would have required an
  additional level of nesting, resulting in less readable code)

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07 22:09:31 +01:00
Wolfgang Denk
a9f4fc3fe5 arch/powerpc/lib/board.c: fix build warning
Commit 1272592 "powerpc: Use getenv_ulong() in place of getenv(),
strtoul" instroduced a build warning for some PPC systems:

board.c: In function 'board_init_r':
board.c:626: warning: unused variable 's'

Fix it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Heiko Schocher <hs@denx.de>
2011-11-03 20:37:27 +01:00
Simon Glass
aab773a47a powerpc: Correct build warning introduced by getenv_ulong() patch
Commit 1272592 introduced a warning since the variable 's' is no longer
always used, depending on the CONFIG options.

Signed-off-by: Simon Glass <sjg@chromium.org>
2011-10-24 21:13:15 +02:00
Bernhard Kaindl
9d256b67f6 powerpc/lib/board.c: Call run_post(POST_ROM) before relocating
The call to run_post(POST_ROM) which can run the POST memory test
is currently called too late when gd has already been copied to DRAM.

This results in failure to boot Linux after a POST_ROM memory test
tested all RAM while gd was already relocated to DRAM due to gd being
overwritten by the POST_ROM memory test.

Support this by moving the call to run_post(POST_ROM) to run earlier,
before U-Boot has started to move data to DRAM (from late board_init_f
to early board_init_f) where DRAM is initialized, but not used yet.

This allows that an POST memory test can test the whole DRAM,
including the area where the board info struct is located.

Signed-off-by: Bernhard Kaindl <bernhard.kaindl@thalesgroup.com>
Cc: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
2011-10-23 23:34:19 +02:00
Simon Glass
1272592e4b powerpc: Use getenv_ulong() in place of getenv(), strtoul
This changes the board code to use the new getenv_ulong() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Roese <sr@denx.de>
2011-10-23 23:33:19 +02:00
Mike Frysinger
e2a53458a7 net: drop !NET_MULTI code
This is long over due.  All but two net drivers have been converted, but
those have now been dropped.

The only thing left to do is actually delete all references to NET_MULTI
and code that is compiled when that is not defined.  So here we scrub the
core code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05 22:22:16 +02:00
Heiko Schocher
780f13a9e1 hwmon: do not init sensors on startup
The U-Boot Design Principles[1] clearly say:

  Initialize devices only when they are needed within U-Boot, i.e. don't
  initialize the Ethernet interface(s) unless U-Boot performs a download
  over Ethernet; don't initialize any IDE or USB devices unless U-Boot
  actually tries to load files from these, etc. (and don't forget to
  shut down these devices after using them - otherwise nasty things may
  happen when you try to boot your OS).

So, do not initialize and read the sensors on startup.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>
2011-08-04 23:30:38 +02:00
Graeme Russ
5c8404aff1 Timer: Remove set_timer completely 2011-07-26 14:52:17 +02:00
Minkyu Kang
d32a1a4caa Don't grab memory for LCD if FB address is defined
If FB address is defined specific address then don't grab memory for LCD

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Kumar Gala <kumar.gala@freescale.com>
2011-04-27 19:38:11 +02:00
Kumar Gala
f9a33f1c61 powerpc: Add cpu_secondary_init_r to allow for initialization post env setup
We can simplify some cpu/SoC level initialization by moving it to be
after the environment and non-volatile storage is setup as there might
be dependancies on such things in various boot configurations.

For example for FSL SoC's with QE if we boot from NAND we need it setup
to extra the ucode image to initialize the QE.  If we always do this
after environment & non-volatile storage is working we can have the code
be the same regardless of NOR, NAND, SPI, MMC boot.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-04 09:24:41 -05:00
Po-Yu Chuang
44c6e6591c rename _end to __bss_end__
Currently, _end is used for end of BSS section.  We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
2011-03-27 19:18:37 +02:00
Peter Tyser
eddf52b593 Replace "FLASH" strings with "Flash" or "flash"
There's no compelling reason to have the output on bootup or the
"flinfo" command print "flash" in uppercase, so use the proper case
where appropriate.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2011-01-19 00:02:37 +01:00
Kumar Gala
a55bb8340b powerpc/85xx: Introduce CONFIG_SYS_EXTRA_ENV_RELOC
Some systems need to relocate the env_addr pointer early because the
location it points to will get invalidated before env_relocate is
called.  One example is on systems that might use a L2 or L3 cache
in SRAM mode and initialize that cache from SRAM mode back to being
a cache in cpu_init_r.

We set this on the 85xx boards that have support for NAND, SPI, or
SDHC/MMC boot support as they use a secondary cache in SRAM mode and
need the env_addr pointer relocated since we change from SRAM to normal
cache mode in cpu_init_r.

Also removed CONFIG_SYS_SPL as its not used anywhere.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-11-30 22:09:09 +01:00