Commit graph

11 commits

Author SHA1 Message Date
Patrice Chotard
e447a18095 ARM: dts: stm32: Use lower-case hex for address for stm32f7-u-boot.dtsi
Replace upper-case hex with lower-case hex for address.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-30 11:15:59 +01:00
Patrice Chotard
61c88ace4b ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
Device tree alignment with kernel v5.10-rc1.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-25 10:29:23 +01:00
Patrice Chotard
2cc83cedc1 ARM: dts: stm32: Use kernel qspi compatible string for stm32f7-uboot.dtsi
For STM32 QSPI driver, "st,stm32-qspi" compatible string was first
introduced in U-boot. But later in kernel side, "st,stm32f469-qspi"
was used.
To simplify, align U-boot QSPI compatible string with kernel one.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-07-22 11:04:52 +02:00
Patrice Chotard
6084e96b99 ARM: dts: stm32: Remove useless "st, stm32-gpio" compatible string
Since pinctrl_stm32 driver update, each gpio bank is now binded
by pinctrl driver. The compatible string "st,stm32-gpio" becomes
useless, remove it.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12 11:50:58 +02:00
Patrice Chotard
60121266c9 ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7
As U-boot stm32f clock driver doesn't support new
bindings for auxiliary clocks (clocks = <&rcc 1 ....>),
restore old bindings for usart1 to get console output.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:21 +02:00
Patrice Chotard
fe63d3cfb7 ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
Synchronize stm32f7 device tree with kernel v4.20.

All pinctrl bindings are updated.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:06 +02:00
Patrice Chotard
01aabf97d1 ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7
In order to prepare and ease future DT synchronization with kernel
DT, migrate all U-boot specific nodes/properties/addons to
U-boot DT files.

Migrate also DT nodes which are not yet available on kernel DT side
as ethernet, ltdc and qspi nodes.

Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-23 15:31:01 +02:00
Patrice Chotard
cd389c03f2 ARM: dts: stm32: Add timer support for STM32F7
Add missing timer node to enable timer5 for STM32F7 SoCs family

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-03-13 21:45:37 -04:00
Patrice Chotard
baf20a7d1a ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot
In order to retrieve the clk_hse fixed clock phandle in clk_stm32f driver,
add "u-boot,dm-pre-reloc" property in Uboot specific DT file.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-28 09:39:05 -05:00
Patrice Chotard
d3651aac46 ARM: DTS: stm32: add pwrcfg node for stm32f746
This node is needed to enable performance mode
when system frequency is set up to 200Mhz.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-11-29 22:30:50 -05:00
Vikas Manocha
f22f3dc996 ARM: DT: STM32F746: add u-boot, dm-pre-reloc property to sub nodes
This patch is required for correct SPL device tree creation by fdtgrep
as fdtgrep looks for u-boot,dm-pre-reloc property of the node to include
it in the spl device tree.

Not adding it in these subnodes ignores the pin muxing of peripherals
which is almost always in the subnodes.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-08 11:57:30 -04:00