Commit graph

1314 commits

Author SHA1 Message Date
Kumar Gala
27afa7d966 Merge branch 'mpc83xx' 2006-01-23 16:24:29 -06:00
Kumar Gala
b970480948 Fixed defines for MPC83xx SICRL register to match current specs
Patch by Kumar Gala, 23 Jan 2006
2006-01-23 16:22:57 -06:00
Kumar Gala
b443f7b628 Merge branch 'mpc8349ads' 2006-01-12 19:53:39 -06:00
Kumar Gala
86902b8e36 Added PCI support for MPC8349ADS board
Patch by Kumar Gala 11 Jan 2006
2006-01-12 19:51:38 -06:00
Kumar Gala
06508f1c9b Merge branch 'mpc8349ads' 2006-01-12 15:52:02 -06:00
Kumar Gala
d5e78b7bf4 Merge branch 'pci' 2006-01-12 15:48:43 -06:00
Kumar Gala
bc680b12d0 Added PCI support for MPC8349ADS board
Patch by Kumar Gala 11 Jan 2006
2006-01-12 15:45:58 -06:00
Kumar Gala
dffb70f330 Fixed PCI indirect config ops to handle multiple PCI controllers
We need to adjust the bus number we are trying to access based
on which PCI controller its on
Patch by Kumar Gala 12 Jan 2006
2006-01-12 15:30:24 -06:00
Kumar Gala
1e8f1da65b Merge branch 'mpc8349ads' 2006-01-11 17:12:46 -06:00
Kumar Gala
19ab485189 Added PCI support for MPC8349ADS board
Patch by Kumar Gala 11 Jan 2006
2006-01-11 17:12:07 -06:00
Kumar Gala
21a3cbd0d8 Merge branch 'ft_infr' 2006-01-11 16:54:53 -06:00
Kumar Gala
304ad60f7d Merge branch 'pci' 2006-01-11 16:53:45 -06:00
Kumar Gala
62ec6418d4 Add helper function for generic flat device tree fixups for mpc83xx
Patch by Kumar Gala 11 Jan 2006
2006-01-11 16:48:10 -06:00
Kumar Gala
e559a6901a Add support for passing initrd information via flat device tree
Patch by Kumar Gala 11 Jan 2006
2006-01-11 16:41:35 -06:00
Kumar Gala
c2871f0380 Added OF_STDOUT_PATH and OF_SOC
OF_STDOUT_PATH specifies the path to the device the kernel can use
for console output

OF_SOC specifies the proper name of the SOC node if one exists.
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:59:02 -06:00
Kumar Gala
4e2531378f Allow board code to fixup the flat device tree before booting a
kernel
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:54:17 -06:00
Kumar Gala
e4f880eddd Added CONFIG_ options for bd_t and env in flat dev tree
CONFIG_OF_HAS_BD_T will put a copy of the bd_t
      into the resulting flat device tree.

      CONFIG_OF_HAS_UBOOT_ENV will copy the environment
      variables from u-boot into the flat device tree

Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:49:31 -06:00
Kumar Gala
3411d11761 Report back PCI bus when doing table based device config
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:27:19 -06:00
Kumar Gala
a179012e37 Added support for PCI prefetchable region and BARs
If a host controller sets up a region as prefetchable and
a device's BAR denotes it as prefetchable, allocate the
BAR into the prefetch region.

If a BAR is prefetchable and no prefetchable region has
been setup by the controller we fall back to allocating
the BAR into the normally memory region.
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:24:15 -06:00
Kumar Gala
ec00c33578 Only disable the MPC83xx watchdog if its enabled out of reset.
If its disabled out of reset SW can later enable it if so desired
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:23:01 -06:00
Kumar Gala
a15b44dbfa Allow config of GPIO direction & data registers at boot on 83xx
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:21:14 -06:00
Kumar Gala
ce574ff506 Enable time handling on 83xx
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:19:12 -06:00
Kumar Gala
9260a56151 Make System IO Config Registers board configurable on MPC83xx
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:12:57 -06:00
Wolfgang Denk
c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Wolfgang Denk
97c8d0bbbd Add support for 28F256J3A flash chips 2005-12-22 01:50:50 +01:00
Wolfgang Denk
27e166b875 Fix compiler problem with at91rm9200dk board.
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
Wolfgang Denk
e6b6d16de7 Merge with /home/sr/git/u-boot 2005-12-16 17:39:27 +01:00
Wolfgang Denk
a9e642e2f8 MPC5200: Set PCI retry counter to 0 = infinite retry;
The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005
2005-12-16 15:14:18 +01:00
Stefan Roese
81a3170b15 Changes to Yellowstone & Yosemite 440EP/GR eval boards:
- Changed GPIO setup to enable another address line in order to
  address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
  the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
Wolfgang Denk
e43232dee8 Merge with /home/m8/git/u-boot 2005-12-14 15:05:59 +01:00
Wolfgang Denk
7481266e4e 2005-12-12 16:06:05 +01:00
Marian Balakowicz
3a7b142b62 Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
Wolfgang Denk
a889bd27ef Fix DPRAM offset/size for MPC8541/8555.
Simplify TQM85xx Makefile handling.
2005-12-06 15:02:31 +01:00
Wolfgang Denk
41253be442 Fix data overflow (typo?) in rtc/ds1302.c 2005-12-04 11:20:57 +01:00
Wolfgang Denk
f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Wolfgang Denk
c75eba3b41 Fix U-Boot compilation for MIPS boards using ELDK 4.0 2005-12-01 02:15:07 +01:00
Wolfgang Denk
4a86d779ff Merge with /home/sr/git/u-boot 2005-12-01 01:38:13 +01:00
Wolfgang Denk
b6f8435664 Adjust TQM834x PHY addresses for latest hardware revision. 2005-12-01 01:17:24 +01:00
Wolfgang Denk
d00de23b15 Increase malloc arena on TQM5200 board to 256 kB.
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
2005-12-01 00:55:19 +01:00
Marian Balakowicz
d9785c14bf Fix miiphy global data initialization (problem on 4xx boards when no
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().

Based on initial patch for 4xx platform by Matthias Fuchs.
2005-11-30 18:06:04 +01:00
Stefan Roese
d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked:
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
Stefan Roese
a46726fdba Compile warning fixed
Patch by Stefan Roese, 29 Nov 2005
2005-11-29 19:13:38 +01:00
Stefan Roese
6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
Stefan Roese
1178a412d2 Minor AMCC 4xx board cleanups
Patch by Stefan Roese, 27 Nov 2005
2005-11-29 18:17:41 +01:00
Marian Balakowicz
0a69b26ed6 Increase IPB and PCI clocks for O2DNT board. 2005-11-27 20:15:41 +01:00
Stefan Roese
3d9569b232 Changed PPC44x startup message (cpu info, speed...) to common style:
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
Wolfgang Denk
f08abe311b Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h 2005-11-25 16:38:03 +01:00
Wolfgang Denk
aa7cfc463a Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
The COPYING file was extended to make clear that these files can be
used in non-GPL code, too.
2005-11-25 10:38:43 +01:00
Stefan Roese
5568e613ee Add support for Prodrive P3P440 board:
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
Wolfgang Denk
fe126d8b34 Change all '$(...)' variable references into '${...}'
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00