Commit graph

36888 commits

Author SHA1 Message Date
Michal Simek
1f4f3d33c7 ARM64: zynqmp: Add support for ZCU102 platform
Add new board support.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
52be5c05a0 ARM64: zynqmp: Remove netdev.h from board file
Including netdev.h is causing compilation warning:
+ int fecmxc_register_mii_postcall(struct eth_device *dev, int
(*cb)(int));
+                                         ^
w+In file included from ../board/xilinx/zynqmp/zynqmp.c:9:0:
w+../include/netdev.h:204:41: warning: ‘struct eth_device’ declared
inside parameter list [enabled by default]
w+../include/netdev.h:204:41: warning: its scope is only this definition
or declaration, which is probably not what you want [enabled by default]

This patch removes it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
658b3a5639 ARM64: zynqmp: Make DDR detection code work on 32bit system
Define u64 types to be usable on 32bit system because of 64bit address
and size cells and 32bit shifts in the code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
aa5b52f56c ARM64: zynqmp: Extend early malloc space to be able to run DM drivers
DM drivers need more malloc space for early DM models allocation.
Use 4k instead of 1k.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
885581a56b ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
There are mini configurations which need to be fit to OCM that's why
these options shouldn't be enabled by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Punnaiah Choudary Kalluri
4521202760 ARM64: zynqmp: Add missing nand node for ep108
Add missing nand node for ep108.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Anurag Kumar Vulisha
ac8f6913c4 ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
This patch adds the sata port phy OOB timing values in the sata
device-tree node.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
85d1142eb6 ARM64: zynqmp: Use 64bit size cell format for memory node
Enable option to support more then 4GB memories in single size block.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
a84de48e75 ARM64: zynqmp: Fix DWC3 binding with the kernel
Use the same binding as is used in mainline Linux kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:05 +02:00
Michal Simek
786db82bd5 ARM64: zynqmp: Add serdes address space dp driver
For run time serdes adjustment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Michal Simek
c588d15444 ARM64: zynqmp: Align register description
Separate register space and put it on more lines.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Hyun Kwon
939cfeafec ARM64: zynqmp: dp: Add default properties to zynqmp.dtsi
Add some default properties to zynqmp.dtsi.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Hyun Kwon
695d75a122 ARM64: zynqmp: Use correct addresses in node names
Reflect actual silicon addresses in DT node names.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Michal Simek
4e31d27b9c ARM64: zynqmp: Align node address with parent node for dpdma
Use right addresses for channel names

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Michal Simek
ca2f5878d6 ARM64: zynqmp: Add backward compatible string for uart
Mainline kernel has no r1p12 compatible string that's why console stops
to work with the latest DTS files. Append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Michal Simek
91a8b0ee69 ARM64: zynqmp: Fix coding style for pcie
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Bharat Kumar Gogada
33aec51742 ARM64: zynqmp: Extend pcie node to support legacy interrupts
Modifying device tree node to support legacy interrupts.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Michal Simek
7c38ca36cb ARM64: zynqmp: Add interrupt-controller property to gpio nodes
GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.

Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
Naga Sureshkumar Relli
908690098c ARM64: zynqmp: Add ddrc node in dts
This patch adds ddrc memory controller node in dts.
size mentioned in dts is 0x30000, because we need to access DDR_QOS
INTR registers located at fd090208 from this driver.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:04 +02:00
VNSL Durga
b34d11de18 ARM64: zynqmp: Added clocks to DT
ZynqMP DMA's main clock and apb clock are added
in zynqmp DT.

Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
2016-04-13 18:29:04 +02:00
Michal Simek
ff50d21bd2 ARM64: zynqmp: Add CCI-400 node
Add CCI-400 node to DTSI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Michal Simek
14cd9eabb8 ARM64: zynqmp: Add missing interrupt-parent to PMU node
ZynqMP is not using global interrupt-parent setting that's why
it has to be listed in every node separately. PMU node missed it and
this patch is adding it.

Reported-by: John Linn <John.Linn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Soren Brinkmann
8f4e3972a0 ARM64: zynqmp: DT: Add power domains
Add power-domains to the DT and attach devices to them.
The power-domains are all logical domains as understood by firmware.
Each PD is identified by a unique identifier that the platform firmware
understands.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
P L Sai Krishna
bd750e7a6c ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes
This patch adds broken-tuning property to SD and
eMMC nodes.

Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Michal Simek
da2ad7843c ARM64: zynqmp: Sync GEM nodes with Linux
Remove jumbo properties which are handled in the driver directly
and use mainline compatible string which is already handled by the
driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Edgar E. Iglesias
7f1d7d974b ARM64: zynqmp: Hook up the GEMs to the SMMU
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Edgar E. Iglesias
88a85aac9f ARM64: zynqmp: Correct IRQ nr for the SMMU
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
P L Sai Krishna
b8bf553992 ARM64: zynqmp: Add 8-bit bus width property.
This patch add 8-bit bus width property to eMMC node.

Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Ranjit Waghmode
eaae2b5d0c ARM64: zynqmp: dt: Change qspi node compatible string
This patch makes compatible string as "m25p80" for qspi node in
ep108 device tree file

Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Michal Simek
beaf7955b7 ARM64: zynqmp: Add missing mmc aliases
Add missing mmc aliases.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Alistair Francis
02e782c6cd ARM64: zynqmp: Use C pre-processor for includes in dts
Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This brings all ZynqMP device trees inline
with each other.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:03 +02:00
Siva Durga Prasad Paladugu
407b76f970 ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file
Move kernel and fdt offsets and sizes to board config file
as the flash size varies across boards

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
1e8d3830f3 ARM: zynq: Do not perform reset at the end of thor
Setup reset off for lthor.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
758f29d0f8 ARM: zynq: Support systems with more memory banks
This is example how to change u-boot to support more memory banks read
from DT.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
c1584e2a21 ARM: zynq: Use memory initialization based on DTS file
Remove hardcoded memory sizes. Use information from DT memory node.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
a195ed3359 ARM: zynq: Fix usb phy node for Zybo
Compatible property should be the first.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
371fc580d2 ARM: zynq: Extend microzed board support
Add missing DT nodes and enable USB.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13 18:29:02 +02:00
Michal Simek
74720dc395 ARM: zynq: Add missing qspi for xm013
Add missing qspi node and make qspi as spi0.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
b347c14426 ARM: zynq: Create empty line below headers
Sync with others zynq DTS files.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
a95d54b490 ARM: zynq: Align spi and qspi node locations
Keep nodes alphabelitally sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13 18:29:02 +02:00
Christian Kohn
ac2c407490 ARM: zynq: zc706: Add adv7511 on i2c bus
Add missing adv7511 and configure to match Base TRD.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Christian Kohn
169050e4f5 ARM: zynq: zc702: Add adv7511 on i2c bus
Add bindings for adv7511.

Signed-off-by: Christian Kohn <christian.kohn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Punnaiah Choudary Kalluri
c9132b1e44 ARM: zynq: DT: Add ethernet phy reset information
Added phy reset gpio information for gem0.

Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
936bbc5d16 ARM: zynq: Fix bootargs in board dtsi
- Sync with Linux kernel
- Remove rootfs
- Remove earlyprintk

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
77bb73decb ARM: zynq: Align devcfg node
- Have compatible string as the first property
- Sync with Linux kernel dtsi
- Add missing interrupt properties

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Moritz Fischer
20fe3f1791 ARM: dts: Updated devicetree bindings for Zynq 7000 platform
Added addtional bindings required for FPGA Manager operation
of the Xilinx Zynq Devc configuration interface.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Moritz Fischer
4c987271b3 ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Michal Simek
58fab4cd9c ARM: zynq: Add interrupt-controller property to gpio nodes
GPIO driver supports an input interrupt that's why gpio node itself can
be labeled as interrupt controller.

Reported-by: John Linn <linnj@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:01 +02:00
Tom Rini
bbf8bef196 Prepare v2016.05-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-11 22:22:25 -04:00
Steve Rae
e3793541b1 fastboot: sparse: remove unnecessary logging
remove logging of the 'skipped' blocks

Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-04-11 20:48:29 -04:00