Commit graph

10 commits

Author SHA1 Message Date
Pau Pajuelo
195dc23185 igep00x0: merge igep0020 and igep0030 defconfigs to igep00x0_defconfig
Update igep00x0 code with the following features:
- Add board and revision detection for the boards:
  - IGEP0020-RF
  - IGEP0020-RC
  - IGEP0030-RG
  - IGEP0030-RE
- Merge IGEP0020 and IGEP0030 mux tables
- Add suport to use GPIO_126, GPIO_127 and GPIO_129
- board_name and board_rev environment variables display board and
  revision informations
- Move dtb name selection from code to boot script

Signed-off-by: Pau Pajuelo <ppajuel@gmail.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Pau Pajuelo <ppajuel@gmail.com>
2017-08-26 14:56:12 -04:00
Ladislav Michl
cccdb1965b igep00x0: remove useless setup_net_chip declaration
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:17 -04:00
Ladislav Michl
b7e042d6af igep00x0: move sysinfo into C file
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2016-07-22 14:46:15 -04:00
Enric Balletbo i Serra
f3b4bc458d OMAP3: igep00x0: Fix boot hang and add support for status LED.
Use the STATUS_LED APIs for indicating a boot progress instead of
show_boot_progress.

This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3:
Move to driver model for GPIO and serial). After that commit the board doesn't
boot. Looks like the problem is the gpio_request call inside the function
show_boot_progress.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2015-01-29 12:00:50 -05:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Enric Balletbo i Serra
d9aacf4190 OMAP3: igep00x0: Add new IGEP COM PROTON.
The IGEP COM PROTON is a new ultra compact module design with an
on-board ethernet controller.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-02-18 13:51:19 -05:00
Enric Balletbo i Serra
4c21b4c4ad OMAP3: igep00x0: use official board names.
This trivial patch only changes current boards names for the official
names.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
2013-02-18 13:51:19 -05:00
Javier Martinez Canillas
3e857d041f OMAP3: igep00x0: fix a build warning on IGEP boards
commit b689cd5 OMAP3: use a single board file for IGEP devices

introduced the following build warning:

igep00x0.h:168:24: warning: backslash-newline at end of file [enabled
by default]

This patch fixes the issue.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-02-07 10:36:26 -05:00
Javier Martinez Canillas
9d4f542123 OMAP3: igep00x0: add boot status GPIO LED
This patch adds an GPIO LED boot status for IGEP boards.

The GPIO LED used is the red LED0 while the Linux kernel
uses the green LED0 as the boot status.

By using different GPIO LEDs, the user can know in which
step of the boot process the board currently is.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2013-02-07 10:36:25 -05:00
Javier Martinez Canillas
77eea28074 OMAP3: use a single board file for IGEP devices
Even when the IGEPv2 board and the IGEP Computer-on-Module
are different from a form factor point of view, they are
very similar in the fact that share many components and how
they are wired.

So, it is possible (and better) to have a single board file
for both devices and just use the CONFIG_MACH_TYPE to make
a differentiation between each board when needed.

This change avoids code duplication by removing 298 lines of
code and makes future maintenance easier.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2013-02-07 10:36:25 -05:00
Renamed from board/isee/igep0030/igep0030.h (Browse further)