Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.
Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Sheevaplug board has 512K CONFIG_BOARD_SIZE_LIMIT. Recently, DM_SERIAL has
pushed the image size a few hundred bytes over that limit. So explicitly
deselect some configs that are unrelated to this board
(and gain back a bit over 2K).
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
CONFIG_SYS_NS16550 is required when DM_SERIAL is enabled for
Kirkwood boards.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
A command called with incorrect parameters should set $? to 1 (false).
Instead of calling cmd_usage(cmdtp) and then returning 0 just return
CMD_RET_FAILURE.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Stefan Roese <sr@denx.de>
Enable driver to fetch the optional parameter (fifo-depth) from device
tree. If the parameter is not found in the device tree, it will use
the default value declared in the driver.
Signed-off-by: Pei Yue Ho <peiyue.ho@starfivetech.com>
Reviewed-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Eng Lee Teh <englee.teh@starfivetech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Add description for fifo-depth parameter that can be used
in the device tree.
Signed-off-by: Pei Yue Ho <peiyue.ho@starfivetech.com>
Reviewed-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Eng Lee Teh <englee.teh@starfivetech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
The i2c driver have global register that i2c bus use
ofnode_get_parent to get parent register address.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Add i2c new register mode driver to support AST2600 i2c
new register mode. AST2600 i2c controller have legacy and
new register mode. The new register mode have global register
support 4 base clock for scl clock selection, and new clock
divider mode.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Printing the I2C controller base address in decimal notation
is not helpful.
Change it to hex notation, which is the standard format found
in the Reference Manual and devicetree.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
At the moment every subcommand of "fdt", except "addr" itself, requires
the DT address to be set first. We explicitly check for that before even
comparing against the subcommands' string.
This early bailout also affects the "move" subcommand, even though that
does not require or rely on a previous call to "fdt addr". In fact it
even sets the FDT address to the target of the move command, so is a
perfect beginning for a sequence of fdt commands.
Move the check for a previously set FDT address to after we handle the
"move" command also, so we don't need a dummy call to "fdt addr" first,
before being able to move the devicetree.
This skips one pointless "fdt addr" call in scripts which aim to alter
the control DT, but need to copy it to a safe location first (for
instance to $fdt_addr_r).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The "fdt move" subcommand was using the provided DTB addresses directly,
without trying to "map" them into U-Boot's address space. This happened
to work since on the vast majority of "real" platforms there is a simple
1:1 mapping of VA to PAs, so either value works fine.
However this is not true on the sandbox, so the "fdt move" command fails
there miserably:
=> fdt addr $fdtcontroladdr
=> cp.l $fdtcontroladdr $fdt_addr_r 40 # simple memcpy works
=> fdt move $fdtcontroladdr $fdt_addr_r
Segmentation fault
Use the proper "map_sysmem" call to convert PAs to VAs, to make this
more robust in general and to enable operation in the sandbox.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At present we show 'main section' as the top-level section name. It may
be more helpful to show the actual image name. This is tricky because
Image is a parent class of Entry_section, so there is no distinction
between an image and a section.
Update it to show the image name.
Signed-off-by: Simon Glass <sjg@chromium.org>
Previously, the TX LED would flash but nothing would appear on the
serial port, and the board would appear dead with a build of the
socfpga_cyclone5_defconfig. I have verified that adding the frequency to
the uart will fix the serial console on my board.
Thanks to @ehoffman on the Rocketboards forum:
https://forum.rocketboards.org/t/cyclonev-programming-fpga-from-u-boot/2230/30
Signed-off-by: Jade Lovelace <lists@jade.fyi>
Reviewed-by: Marek Vasut <marex@denx.de>
This contains various fixes and small features. I've included a reset patch as
well since it was in the same series as a clock patch.
-----BEGIN PGP SIGNATURE-----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=+n5i
-----END PGP SIGNATURE-----
Merge tag 'clk-2023.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-clk
Clock changes for 2023.04-rc1
This contains various fixes and small features. I've included a reset patch as
well since it was in the same series as a clock patch.
- A fix for a long standing bug that has been exposed by commit
50128aeb0f ("cyclic: get rid of cyclic_init()") preventing 8xx boards
from booting since u-boot 2023.01
- A GPIO driver for powerpc 8xx chip
- Fixup for powerpc 8xx SPI driver
- A new powerpc 8xx board
- The two devices having that board.
This allows devm_reset_control_get(dev, NULL) to work and get the first
reset control, which is common in code ported from Linux.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230122000252.53642-2-samuel@sholland.org
This allows devm_clock_get(dev, NULL) to work and get the first clock,
which is common in code ported from Linux.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20230122000252.53642-1-samuel@sholland.org
The clock UCLASS need to be probed to allow availability of the
private data (struct clk *), get in show_clks() with dev_get_clk_ptr()
before use them.
Without this patch the clock dump can cause crash because all the
private data are not available before calling the API clk_get_rate().
It is the case for the SCMI clocks, priv->channel is needed for
scmi_clk_get_rate() and it is initialized only in scmi_clk_probe().
This issue causes a crash for "clk dump" command on STM32MP135F-DK board
for SCMI clock not yet probed.
Fixes: 1a725e2290 ("clk: fix clock tree dump to properly dump out every registered clock")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221213145708.v2.1.Ia0bc6b272f1e2e3f37873c61d79138c2663c4055@changeid
[backport from linux commit bedcf9d1dcf88ed38731f0ac9620e5a421e1e9d6]
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.
No functional changes intended.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221219113127.528282-3-dario.binacchi@amarulasolutions.com
[backport from linux commit a429c60baefd95ab43a2ce7f25d5b2d7a2e431df]
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20221219113127.528282-2-dario.binacchi@amarulasolutions.com
In various cases logical memory blocks are coalesced; As a result doing
a strict check whether memory blocks are the same doesn't necessarily
work as a previous addition of a given block might have been merged into
a bigger block.
Fix this by considering a block is already registered if it's a pure
subset of one of the existing blocks.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
To quote the author:
Since U-Boot's tracing feature was originally written, quite a few changes
have taken place in this domain. The original text format used by tracing
is still emitted by Linux, but a new trace-cmd tool has invented a binary
format which is now used by new tools, such as kernelshark.
With recent distributions and the move to Python 3, the old pybootchart
tool does not build or run. Unfortunately there is no 1:1 replacement for
the features that were provided by pybootchart, or at least it is not
obvious. Still, it makes sense to keep with the times.
This series updates proftool to use the new binary format, adding support
for function and funcgraph tracing, so that U-Boot's trace records can be
examined by trace-cmd and kernelshark.
This series also adds support for a flamegraph, which provides a visual
way to see which functions are called a lot, as well as which ones consume
the most time.
Some minor updates to the trace implementation within U-Boot are included,
to provide a little more information and to fix a few problems.
No unit tests are provided by proftool, but a functional test ensures that
sandbox can emit traces which can be processed by proftool, then parsed by
trace-cmd and that the timing of the various formats looks consistent.
Revamp the documentation for the new features, including a description of
the new features and documentation for the trace command.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a test which runs sandbox, collects a trace and makes sure it can
be processed by trace-cmd. This should ensure that this feature continues
to work as U-Boot and trace-cmd evolve.
Signed-off-by: Simon Glass <sjg@chromium.org>
Build trace-cmd as part of the docker image, so that trace tests can be
used. Unfortunately the version provided by distributions is a little old
and has bugs. It also does not support specifying the time base for the
trace, which is required to convert microseconds to nanaseconds.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a second variant of the flame graph that shows records in terms of the
number of microseconds used by each call stack. This is a useful way of
seeing where time is going within the execution of U-Boot.
This requires a call stack that records the start time of each function,
as well as a way of subtracting all time consumed by child functions, so
that this time is not counted twice by the flamegraph. The time values in
the output are just for the function itself, not for its children.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to see how many times each function is called, particularly
in the context of its callers. A flamegraph is a way of showing this.
Support output in this format which can be used by the flamegraph.pl
script, to generate an SVG image for browsing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for writing ftrace records in the 'funcgraph' format, which
shows function entry and exit points as well as the time taken by each
function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the information in the trace header instead of reading it from the
trace records. Add debugging to check that System.map and the trace header
agree on this value.
Signed-off-by: Simon Glass <sjg@chromium.org>
The old text format is not much used anymore. Instead a new trace-cmd tool
has introduced a binary format for trace records.
Add support for generating this format. This involves removing the old
text format, adding various helpers for the new format and adjusting the
code to use an output file instead of stdout.
Signed-off-by: Simon Glass <sjg@chromium.org>
The current use of 'profile' in some places is confusing. Update the code
to use the word 'trace' consistently. Change the flags to better match
their meaning and add some more comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
If something is wrong with a board's timer function such that it calls
functions not marked with notrace, U-Boot will hang.
Detect this, print a message and disable the trace.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the early trace buffer overflows it leaves a gap in the trace buffer
between where the actual data finished and where it would have finished if
there were enough buffer space. This results in corrupted output.
Adjust the logic to resolve this and add a message when the buffer
overflows.
Signed-off-by: Simon Glass <sjg@chromium.org>
The trace does not necessarily start at the top level, so we can see it
go negative. Track this so that we can show an accurate value for the
stack depth.
Signed-off-by: Simon Glass <sjg@chromium.org>
Given that the compiler adds two function calls into each function, the
current spacing is overkill. Drop it down to 16 bytes per function, which
is still plenty. This saves some space in the trace buffer.
Also move the calculation into a function, so it is common code. Add a
check for gd->mon_len being unset, which breaks tracing.
Signed-off-by: Simon Glass <sjg@chromium.org>
It seems better to put the TEXT_BASE value in the file header rather than
in an entry record. While it is true that there is a separate base for
pre-relocation, this can be handled by using offsets in the file.
It is useful to have a version number in case we need to change the trace
format again.
Update the header to make these changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tracing is typically enabled by the time driver model starts up, so there
is no point in adding a 'notrace' to the timer-init function. However,
once the driver model timer is enabled, we do need to be able to access
the timer's private data when reading the timer, so add it to the core
function needed for that.
Update the function's documentation while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reset the serial flags so that the debug UART can be used (if enabled)
in the small window where there is no serial device. This can avoid a hang
in some cases.
Signed-off-by: Simon Glass <sjg@chromium.org>
This change was made for the benefit of RISC-V but broke other
architectures also. In particular, tracing cannot work without this value.
Add it back for architectures which support it.
Fixes: 3c9fc23c44 ("sandbox: don't refer to symbol _init")
Signed-off-by: Simon Glass <sjg@chromium.org>
This file is produced by the moveconfig.py tool. It should never be added
to the repo, so add it to the .gitignore file.
Signed-off-by: Simon Glass <sjg@chromium.org>
