Commit graph

17306 commits

Author SHA1 Message Date
Marek Vasut
46dcb31065 arm: psci: Add PSCI v1.1 macro
Add macro representing the PSCI v1.1 .

Signed-off-by: Marek Vasut <marex@denx.de>
2023-01-31 15:46:39 +01:00
Detlev Casanova
0b32bc4831 imx6q-sabrelite: Re-add mmc aliases
In commit d0399a46e7, the device tree was
synchronized from linux and the aliases were dropped.

They need to be kept so that the mmc cards are in the right order.
Without the aliases, u-boot reports:
MMC:   FSL_SDHC: 2, FSL_SDHC: 3

With the aliases, u-boot reports:
MMC:   FSL_SDHC: 0, FSL_SDHC: 1

The upstream linux device tree does not contain the same aliases than
u-boot (It keeps the devices order with /dev/mmcblk2 and /dev/mmcblk3).
Because this board has been using different aliases in u-boot
and linux, a imx6q-sabrelite-u-boot.dtsi file is added to be
automatically included in imx6q-sabrelite.dts.

This way, linux and u-boot each keep their own aliases and there
is no breakage on current installations.

This should never be done for new boards as we want to keep linux and
u-boot with the same aliases as much as possible.
This patch is only necessary to avoid breaking existing setups.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-31 15:46:39 +01:00
Peng Fan
1224dd8b15 imx: mx6sxsabreauto: select DM_SERIAL
Select DM_SERIAL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:34 +01:00
Peng Fan
2108db6c92 imx: mx6sllevk: select DM_SERIAL
Select DM_SERIAL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:34 +01:00
Peng Fan
3a6d7ef389 imx: mx6ull/z_14x14_evk: clean up UART iomux
After DM_SERIAL, and set pinctrl_uart1 as pre-reloc, no need initialize
iomux at board file.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-01-31 12:11:33 +01:00
Ye Li
0e28622779 ARM: dts: imx8ulp-evk: Fix iomuxc issue
The property fsl,mux_mask is deleted by commit ed7bda5 (imx8ulp:
synchronise device tree with linux). This causes the pinctrl
driver not work on 8ULP, so fail to print any log.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-01-30 23:23:02 +01:00
Ying-Chun Liu (PaulLiu)
624c9dea92 dts: imx8mp-rsb3720: modify configrations to load fip into memory
The changes of commit 6a21c69521 ("arm: dts: imx8mp: add of-list
support to common imx8mp-u-boot.dtsi") breaks the loading of the fip.
This commit fixes the break by modify the configuration properly.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Ying-Chun Liu (PaulLiu)
8b7036e6aa dts: imx8mp: assign binman_configuration label to config-SEQ
assign a label for config-SEQ so that the board dts can modify
the configuration more easily.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Fabio Estevam
d12618b927 imx8mm-phg: Add board support
Add the board support for the i.MX8MM Cloos PHG board.

This board uses a imx8mm-tqma8mqml SoM from TQ-Group.

imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken
directly from Linux 6.2-rc3.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-30 23:23:02 +01:00
Frieder Schrempf
6e91c06a73 arm64: dts: imx8mm-kontron: Add RTC aliases
Add aliases for the RTCs on the board and on the SoC. This ensures that
the primary RTC is always the one on the board that has a buffered supply
and maximum accuracy.

This is a direct port of the pending commit from linux-next.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Fabio Estevam
c4d79448b0 mx7: clock: Use 60MHz for the I2C clocks
When an I2C clock is enabled inside enable_i2c_clk() the clock rate is
configured as PLL_SYS_MAIN_120M_CLK / 2 = 60MHz.

Currently, the I2C clock is retrieved from I2C1_CLK_ROOT, which
may not be the one that was enabled.

As there is no clock driver for the imx7d, it is better to return 60MHz
for the I2C clock.

This provides a workaround for the imx7d-pico board, where I2C4 is
connected to the PMIC.

With this change, it is possible to convert the imx7d-pico board
to DM_I2C and DM_PMIC.

Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:02 +01:00
Marek Vasut
3f7afddc9c ARM: imx: bootaux: Fix LTO -Wlto-type-mismatch
Commit 56c2dbdaba ("imx: bootaux: cleanup code") introduces the
following LTO related warning:

"
arch/arm/mach-imx/imx_bootaux.c:24:31: warning: type of ‘hostmap’ does not match original declaration [-Wlto-type-mismatch]
   24 | const __weak struct rproc_att hostmap[] = { };
      |                               ^
arch/arm/mach-imx/imx8m/soc.c:1590:24: note: array types have different bounds
 1590 | const struct rproc_att hostmap[] = {
      |                        ^
arch/arm/mach-imx/imx8m/soc.c:1590:24: note: ‘hostmap’ was previously declared here
../aarch64-linux-gnu/bin/ld: warning: u-boot has a LOAD segment with RWX permissions
"

This is because the weak empty array of structures "hostmap" is eventually
replaced by non-empty array of structures with different number of elements.
Fix this by avoiding weak variable size array, instead use a weak function
which returns single pointer to the array.

Fixes: 56c2dbdaba ("imx: bootaux: cleanup code")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-01-30 23:23:02 +01:00
Marek Vasut
4408cd6641 ARM: imx: bootaux: Fix macro misuse
There are no CONFIG_{TOOLS_,SPL_,TPL_,}IMX8M macros, nor is there one for
ARM64. Use plain IS_ENABLED(CONFIG_IMX8M) and IS_ENABLED(CONFIG_ARM64) to
avoid expanding the {TOOLS_,SPL_,TPL_,} part.

Fixes: 56c2dbdaba ("imx: bootaux: cleanup code")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2023-01-30 23:23:02 +01:00
Fabio Estevam
d939c5e0f5 imx6qdl-sabresd: Pass mmc alias
Originally, the mmc aliases node was present in imx6qdl-sabresd.dtsi.

After the sync with Linux in commit d0399a46e7 ("imx6dl/imx6qdl:
synchronise device trees with linux"), the aliases node is gone as
the upstream version does not have it.

This causes a regression in which the SD card cannot be found anymore.

Fix it by passing the alias node in the u-boot.dtsi file to
restore the original behaviour where the SD card (esdhc3) was
mapped to mmc1.

Fixes: d0399a46e7 ("imx6dl/imx6qdl: synchronise device trees with linux")
Reported-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:01 +01:00
Marek Vasut
d51b38762d ARM: imx: Reinstate decode ECSPI env location from i.MX8M ROMAPI tables
Decode ECSPI boot device in env_get_location() from i.MX8M ROMAPI tables.
This is necessary to correctly identify env is in SPI NOR when the system
boots from SPI NOR attached to ECSPI.

This reinstates change from commit:
e26d0152d6 ("ARM: imx: Decode ECSPI env location from i.MX8M ROMAPI tables")
which has been dropped in commit:
b0a284a7c9 ("imx: move get_boot_device to common file")

Fixes: b0a284a7c9 ("imx: move get_boot_device to common file")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 23:23:01 +01:00
Jagan Teki
1a45a031d7 Revert "rockchip: Only call binman when TPL available"
This reverts commit f5315dd629.

[why]
TPL is not mandatory for not all Rockchip SoCs, some SoCs like
RK356x, and RK3588 still use mainline u-boot without TPL as
their ddr init programs are accessed via binaries provided by
Rockchip instead of ddr source code.

Marking TPL build makes it not able to build u-boot.itb on
RK356x targets so revert this so that it can build an SPL build
that would support all across Rockchip platforms.

Suggested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Tested-by: Anand Moon <linux.amoon@gmail.com>  # CM3
2023-01-30 15:33:36 -05:00
Andrejs Cainikovs
352c402397 apalis-imx8: add emmc/mmc card pinctrl's for different speeds
Add pinctrl's for high speed eMMC and MMC cards.

Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 21:02:27 +01:00
Dario Binacchi
6629e15904 arm: dts: imx8mn-u-boot: fix DDR3 only support
In case the CONFIG_IMX8M_LPDDR4 and CONFIG_IMX8M_DDR4 options are both
disabled (i. e. BSH boards), binmain fails because DDR4 bin files are
missing.

Fixes: 93c4c0e4dd ("arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-01-30 20:56:23 +01:00
Neil Armstrong
8f5e9de121 ARM: meson: Add support for Odroid-N2L
ODROID-N2L is a variant SBC in small form factor and some peripherals
are removed from ODROID-N2PLUS based on S922X SoC.

- On-board ethernet is removed
- On-board RTC is removed
- USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports
  are available
- Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink
  is recommended or a tall passive sink is optional
- 3.5mm earjack is removed
- IR remote receiver is removed
- MIPI DSI port is added

It doesn't use the odroid-n2 board support since ADC revision
collides with Odroid-N2+ and since it doesn't have on-board ethernet
no need to load the MAC address from eFuses.

Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-2-c60f695e0f6c@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-30 14:24:17 +01:00
Neil Armstrong
5017e305ee ARM: dts: Import Odroid-N2L support
Import Odroid-N2L support posted at [1] and merged for Linux v6.3-rc1.

[1] https://lore.kernel.org/all/20230122-topic-odroid-n2l-upstream-initial-v2-0-8d3fea6d403d@linaro.org/

Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-1-c60f695e0f6c@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-30 14:24:17 +01:00
Mark Kettenis
bdebb00d83 pci: Add Apple PCIe controller driver
This driver supports the PCIe controller on the Apple M1 and
M2 SoCs.  The code is adapted from the Linux driver.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-01-27 14:47:58 -05:00
Sinthu Raja
ca04b7da6d arm: dts: k3-am68-sk: Add r5 specific dt support
Add initial support for AM68 SK device tree that runs on R5.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-27 12:51:27 -05:00
Sinthu Raja
cc07b6c346 arm: dts: Add support for A72 specific AM68 Starter Kit Base Board
The SK architecture comprises of baseboard and a SOM board. The
AM68 Starter Kit's baseboard contains most of the actual connectors,
power supply etc. The System on Module (SoM) is plugged on to the base
board. Therefore, add support for peripherals brought out in the base
board.

Schematics: https://www.ti.com/lit/zip/SPRR463

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-27 12:51:27 -05:00
Sinthu Raja
3499deaf28 arm: dts: Add initial support for AM68 Starter Kit System on Module
AM68 Starter Kit (SK) is a low cost, small form factor board designed
for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high
performance vision accelerators, hardware accelerators, latest C71x
DSP, high bandwidth real-time IPs for capture and display. The SoC is
power optimized to provide best in class performance for industrial
applications.

        AM68 SK supports the following interfaces:
        * 16 GB LPDDR4 RAM
        * x1 Gigabit Ethernet interface
        * x1 USB 3.1 Type-C port
        * x2 USB 3.1 Type-A ports
        * x1 PCIe M.2 M Key
        * 512 Mbit OSPI flash
        * x2 CSI2 Camera interface (RPi and TI Camera connector)
        * 40-pin Raspberry Pi GPIO header

SK's System on Module (SoM) contains the SoC, PMIC, DDR and OSPI flash.
Therefore, add support for the components present on the SoM.

Schematics: https://www.ti.com/lit/zip/SPRR463
TRM: http://www.ti.com/lit/pdf/spruj28

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2023-01-27 12:51:27 -05:00
Sinthu Raja
fca27ee8b9 arch: mach-k3: Update board specific API name to K3 generic API name
Although the board_init_f API initialises the SoC, the API name is
incorrectly specified and misleads the functionality. This file should
only include k3-specific functionality. Change the API's name to something
more K3-specific and separate the function to make it more modular.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-27 12:51:27 -05:00
Jim Liu
337bc26f05 arm: npcm8xx: add security feature header
The NPCM driver can use on npcm7xx/npcm8xx
so add npcm8xx header for driver.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-01-27 12:51:26 -05:00
Jim Liu
04bd6c8997 ARM: dts: npcm8xx: add npcm845 function node
Add functaion node list as below:
1. i2c
2. gmac
3. otp
4. aes
5. sha
6. rng
7. serial

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2023-01-27 12:51:26 -05:00
Tom Rini
9ddbd70ff9 Xilinx chnages for v2023.04-rc1
makefile:
 - Add multi_dtb_fit dependency
 
 clk:
 - Handle error cases
 
 microblaze:
 - Disable falcon mode and cleanup code around
 
 xilinx:
 - Enable regular expression matching in board_fit_config_name_match()
 - Fix FRU handling for 0xC1 format
 - Fix Xilinx legacy format eeprom parsing
 
 zynqmp:
 - Some DT updates/cleanups
 - Fix IDcode for xck24
 - Remove empty mini config files
 - Add support for k24
 
 versal:
 - Remove empty mini config files
 
 versal_net:
 - Setup timer when runs in EL3
 - Build u-boot.elf for mini configurations
 
 zynq-gem:
 - Add support for new compatible strings
 - Remove support for Avnet Ultrazedev SOM
 - Handle SGMII with PCS phy
 
 spi:
 - Add support for gigadevice parts
 
 misc:
 - Remove CONFIG_TARGET_VENUS ifdef
 - Add missing headers to remove sparse warnings
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCY9PmzwAKCRDKSWXLKUoM
 IYWxAJwNgiXtFT17pBy+1M0JvSWgyvWF3QCfTQG2Krnw0+d65PF5A7UFTDL7SZM=
 =cMrc
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx chnages for v2023.04-rc1

makefile:
- Add multi_dtb_fit dependency

clk:
- Handle error cases

microblaze:
- Disable falcon mode and cleanup code around

xilinx:
- Enable regular expression matching in board_fit_config_name_match()
- Fix FRU handling for 0xC1 format
- Fix Xilinx legacy format eeprom parsing

zynqmp:
- Some DT updates/cleanups
- Fix IDcode for xck24
- Remove empty mini config files
- Add support for k24

versal:
- Remove empty mini config files

versal_net:
- Setup timer when runs in EL3
- Build u-boot.elf for mini configurations

zynq-gem:
- Add support for new compatible strings
- Remove support for Avnet Ultrazedev SOM
- Handle SGMII with PCS phy

spi:
- Add support for gigadevice parts

misc:
- Remove CONFIG_TARGET_VENUS ifdef
- Add missing headers to remove sparse warnings
2023-01-27 10:15:39 -05:00
Jonas Karlman
7e215ad05f rockchip: Use atf as firmware and move u-boot to loadables in FIT
The FIT generated after the switch to using binman is using different
values for firmware and loadables properties compared to the old script.

With the old script:
 firmware = "atf-1";
 loadables = "u-boot", "atf-2", ...;

After switch to binman:
 firmware = "u-boot";
 loadables = "atf-1", "atf-2", ...;

This change result in SPL jumping directly into U-Boot proper instead of
initializing TF-A.

With this patch the properties change back to:
 firmware = "atf-1";
 loatables = "u-boot", "atf-2", ...;

Fixes: e0c0efff2a ("rockchip: Support building the all output files in binman")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-26 10:47:45 -07:00
Jonas Karlman
99e3a2cd4e rockchip: Add sha256 hash to FIT images
Add sha256 hash to FIT images when CONFIG_SPL_FIT_SIGNATURE=y.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-26 10:47:45 -07:00
Jonas Karlman
5ad03fc77d rockchip: Align FIT image data to SD/MMC block length
SPL load FIT images by reading the data aligned to block length.
Block length aligned image data is read directly to the load address.
Unaligned image data is written to an offset of the load address and
then the data is memcpy to the load address.

This adds a small overhead of having to memcpy unaligned data, something
that normally is not an issue.

However, TF-A may have a segment that should be loaded into SRAM, e.g.
vendor TF-A for RK3568 has a 8KiB segment that should be loaded into the
8KiB PMU SRAM. Having the image data for such segment unaligned result
in segment being written to and memcpy from beyond the SRAM boundary, in
the end this results in invalid data in SRAM.

Aligning the FIT and its external data to MMC block length to work
around such issue.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-26 10:47:45 -07:00
Michal Simek
2fe2be2d27 arm64: zynqmp: Add support for Kria K24 SOM
SOM itself from PS point of view is using the same configuration as K26
that's why reuse that files and only change compatible strings.

The reason for creating own set of files is just in case when versions
start to diverge because of HW change, supply chain issue, etc.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/61f877ec0b480c5bd368a1211fc73ff7465016bd.1674043915.git.michal.simek@amd.com
2023-01-24 13:59:33 +01:00
Michal Simek
8489b6d2e3 arm64: zynqmp: Fill model name for SOM CCs
When U-Boot do DTB reselection origin model for SOM is used and from log it
is not visible if DTB was switched or not. That's why add model directly to
CC (carrier card) to show new model if reselection was successful.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/49ba1007218496c48d287454e84a5b8c08abc692.1674043452.git.michal.simek@amd.com
2023-01-24 13:58:49 +01:00
Andre Przywara
382b837134 sunxi: eMMC: support TOC0 on boot partitions
To determine whether we have been booted from an eMMC boot partition, we
replay some of the checks that the BROM must have done to successfully
load the SPL. This involves a checksum check, which currently relies on
the SPL being wrapped in an "eGON" header.

If a board has secure boot enabled, the BROM will only accept the "TOC0"
format, which is internally very different, but uses the same
checksumming algorithm. Actually the only difference for calculating the
checksum is that the size of the SPL is stored at a different offset.

Do a header check to determine whether we deal with an eGON or TOC0
format, then set the SPL size accordingly. The rest of the code is
unchanged.

This fixes booting from an eMMC boot partition on devices with secure
boot enabled, like the Remix Mini PC.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-01-23 01:18:23 +00:00
Andre Przywara
456093b4a3 sunxi: remove CONFIG_MMC?_CD_PIN
For legacy reasons we were defining the card detect GPIO for all sunxi
boards in each board's defconfig.
There is actually no need for a card-detect check in the SPL code (which
consequently has been removed already), and also in U-Boot proper we
have DM code to query the CD GPIO name from the device tree.

That means we don't have any user of that information left, so can
remove the definitions from the defconfigs.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Andre Przywara
7f0938eac5 sunxi: fel: drop redundant "control register" save/restore
For some reasons shrouded in mystery, the code saving the FEL state was
saving the SCTLR register twice, with the second copy trying to justify
itself by using its ancient "control register" alias name.

Drop the redundant second copy, both from the fel_stash data structure,
and also the code saving and restoring it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Andre Przywara
4871650c95 sunxi: armv8: fel: load only 32-bit values
Both the values and the MMIO addresses that we need during the 64-bit FEL
restore are smaller than 2^32, so we don't need to do any 64-bit loads.

Change the loads to only load 32 bits worth of data, that saves us some
bytes for storing the values.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Andre Przywara
3baa0fbe6b sunxi: f1c100s: Drop no-MMC hack
When support for the Allwinner F1C100s SoC was originally introduced,
its DT lacked any MMC nodes, which upset our sunxi-u-boot.dtsi overlay,
when it tried to add an alias to the SD card.  To quickly fix this back
then, we guarded that alias with a preprocessor macro.

Now the F1C100s family has gained MMC nodes, so we don't need the
special treatment anymore. Just remove this guard.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-01-21 01:32:23 +00:00
Tom Rini
6e7df1d151 global: Finish CONFIG -> CFG migration
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00
Tom Rini
a84fa1bef4 nxp: Finish migration of SYS_FSL_SRDS_[12] to Kconfig
As this is used on both ARM and PowerPC platforms, this needs to be
listed in arch/Kconfig.nxp and match how they're currently used by
select'ing them under the required PowerPC ARCH_xxx options.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:23 -05:00
Tom Rini
89c90cadf3 nxp: Finish migration of SYS_FSL_IFC_BANK_COUNT to Kconfig
As this is used on both ARM and PowerPC platforms, this needs to be
asked in arch/Kconfig.nxp.  Set the PowerPC defaults based on
arch/powerpc/include/asm/config_mpc85xx.h and remove the default set in
drivers/mtd/nand/raw/fsl_ifc_nand.c

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
80c75ce00d fsl-layerscape: Rework usage of CONFIG_CLUSTER_CLK_FREQ
In the case where CONFIG_CLUSTER_CLK_FREQ is not defined, simply set
cluster_clk to get_board_sys_clk().

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
1c88640fc8 arm: lib1funcs.S: Update compatibility with Linux comment slightly
At this point, the Linux code for "lib1funcs" has changed rather
dramatically. While a resync would be beneficial, it's outside the scope
of what we need here.  Simply remove the define for CONFIG_AEABI and
tests for it.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
ae8a922bd2 arm: Rework usage of CONFIG_ARMV[78]_SECURE_BASE in linker scripts
In order to avoid defining CONFIG_ARMV[78_]SECURE_BASE as empty in the
linker scripts, if not already defined, add and use
__ARMV[78_]SECURE_BASE for when the base is not defined and we want the
linker scripts to continue.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Tom Rini
a3fda0d30a global: Remove unused CONFIG defines
Remove some CONFIG symbols and related comments, etc, that are unused
within the code itself at this point.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-20 12:27:06 -05:00
Neil Armstrong
640192d04f ARM: meson: add support for Odroid Go Ultra
This adds initial support for the Hardkernel Odroid Go Ultra.

The Odroid Go Ultra is a portable gaming device with the following
characteristics:
- Amlogic S922X SoC
- RK817 & RK818 PMICs
- 2GiB LPDDR4
- On board 16GiB eMMC
- Micro SD Card slot
- 5inch 854×480 MIPI-DSI TFT LCD
- Earphone stereo jack, 0.5Watt 8Ω Mono speaker
- Li-Polymer 3.7V/4000mAh Battery
- USB-A 2.0 Host Connector
- x16 GPIO Input Buttons
- 2x ADC Analog Joysticks
- USB-C Port for USB2 Device and Charging

The following are not yet handled:
- Battery RK818 Gauge and Charging
- 5inch 854×480 MIPI-DSI TFT LCD

Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-2-f96bab9db396@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-20 16:27:40 +01:00
Neil Armstrong
2acbc33b3d ARM: dts: sync Amlogic ARM64 DT from v6.2-rc1
This syncs the Amlogic G12A, G12B & SM1 base DT + the
Odroid Go Ultra DT from Linux v6.2-rc1 from commmit [1].

[1] 1b929c02afd3 ("Linux 6.2-rc1")

Link: https://lore.kernel.org/r/20230119-u-boot-odroid-go-ultra-v1-1-f96bab9db396@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-20 16:27:40 +01:00
Neil Armstrong
e327e2affd ARM: meson: switch AXG & GX dwc2 otg to DM
With CONFIG_DM_USB_GADGET=y, we no longer need any board_usb_*() logic
because:
* the dwc2 driver is DM compatible, and handles its own clock enabling
* the dwc3-meson-gxl glue drivers handles "force mode switching"

Remove all mach-meson gx & axg usb code and enable CONFIG_DM_USB_GADGET.

Note: Only configs having both CONFIG_USB_DWC3_MESON_GXL=y *and*
      USB_GADGET_DWC2_OTG=y have been updated.

Thanks for the original work from Mattijs at [1]

[1] https://lore.kernel.org/all/20221024-meson-dm-usb-v1-2-2ab077a503b9@baylibre.com/

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20230117-u-boot-usb-gxl-otg-dm-v1-2-2853f6d75b06@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-01-20 16:21:31 +01:00
Tom Rini
53c47c59e6 convert rockchip to use binman
patman fix for checkpatch
 binman optional entries, improved support for ELF symbols
 trace improvements
 minor fdt refactoring
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmPIpV4RHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZuqwgA0UpYQEX6/MegzHSCIx3AMT4rCF1Ytitr
 LS4Cbvj1Q09Rt9jriW7wAV5AobVPwGf2L5SVcnWv2I9+MmypDIXEe8HIrt2fRFu9
 bzn/2GOzXczuXqPFa/CWOUwjvCzTb8Sl9NtRszrP5NvOzuN15x00ZUYaXFO7fgsB
 zZMzOKxemwjdtLaox+x+VIJ95HMDEkYrWTAqTPg74CNVSjRbbLNqNq0zqkHB8SnH
 ubgphtIKYItTeIXcfIa9V4LeQp0ZitkzSfAibX+nIPCMPg9jbG9MrQQ+VvSZDjnM
 y8wa8gFj47Ek+gGNFXMHIpO6tBd83uHRgtf2x+zhcovLELYnZ6fDGw==
 =1K6m
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-18jan23' of https://source.denx.de/u-boot/custodians/u-boot-dm

convert rockchip to use binman
patman fix for checkpatch
binman optional entries, improved support for ELF symbols
trace improvements
minor fdt refactoring
2023-01-19 09:46:57 -05:00
Simon Glass
12c3e948ee rockchip: Drop the FIT generator script
This is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-18 14:55:40 -07:00