Commit graph

442 commits

Author SHA1 Message Date
Jagannadha Sutradharudu Teki
d08a1baf61 sf: Set quad enable bit support
This patch provides support to set the quad enable bit on flash.

quad enable bit needs to set before performing any quad IO
operations on respective SPI flashes.

Currently added set  quad enable bit for winbond and spansion flash
devices. stmicro flash doesn't require to set as qeb is volatile.
remaining flash devices support will add in future patches.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:13:26 +05:30
Jagannadha Sutradharudu Teki
6cba6fdf96 sf: ops: Add configuration register writing support
This patch provides support to program a flash config register.

Configuration register contains the control bits used to configure
the different configurations and security features of a device.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:13:25 +05:30
Jagannadha Sutradharudu Teki
3163aaa63f sf: Add quad read/write commands support
This patch add quad commands support like
- QUAD_PAGE_PROGRAM => for write program
- QUAD_OUTPUT_FAST ->> for read program

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:13:11 +05:30
Jagannadha Sutradharudu Teki
4e09cc1e2c sf: Add extended read commands support
Current sf uses FAST_READ command, this patch adds support to
use the different/extended read command.

This implementation will determine the fastest command by taking
the supported commands from the flash and the controller, controller
is always been a priority.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11 15:10:28 +05:30
Poddar, Sourav
ac5cce38de driver: mtd: sf_ops: claim bus while doing memcpy
claim spi bus while doing memory copy, this will set up
the spi controller device control register before doing
a memory read.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Yebio Mesfin <ymesfin@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-12-19 12:23:22 +05:30
Luka Perkov
57af475389 sf: probe: add support for MX25L2006E
Add support for Macronix MX25L2006E SPI flash.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-12-18 23:23:41 +05:30
Luka Perkov
28303f617a sf: probe: Hex values are in lower case
All other hex values in sf_probe.c are in lower case so we should
fix this one too.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-12-18 23:23:41 +05:30
Tom Rini
65b7fe28a1 Merge branch 'spi' of git://git.denx.de/u-boot-x86 2013-12-10 09:36:23 -05:00
Mike Frysinger
ffdb20bea1 sandbox: spi: Add new SPI flash driver
This adds a SPI flash driver which simulates SPI flash clients.
Currently supports the bare min that U-Boot requires: you can
probe, read, erase, and write.  Should be easy to extend to make
it behave more exactly like a real SPI flash, but this is good
enough to merge now.

sjg@chromium.org added a README and tidied up code a little.
Added a required map_sysmem() for sandbox.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-09 12:22:39 -07:00
Simon Glass
0efc02499f spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node
This allows us to put the SPI flash chip inside the SPI interface node,
with U-Boot finding the correct bus and chip select automatically.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-09 12:22:12 -07:00
Priyanka Jain
7aa6c455c3 powerpc: spiflash:Add corenet devices support in eSPI SPL
Existing eSPI SPL framework assumes booting from spi-image
with boot_format header which contains final u-boot Image
offset and size. No such header is present in case of
corenet devices like T1040 as corenet deivces use PBI-RCW
based intialization.

So, for corenet deives, SPL bootloader use values provided
at compilation time. These values can be defined in board
specific config file.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-12-04 14:54:34 -08:00
Masahiro Yamada
2fc7ef6196 drivers: mtd: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:22:13 -04:00
Bo Shen
21497ded5d sf: probe: Add missing Atmel at25df321 flash
As the spi flash transfer to multiple parts, it is forgot to add
Atmel AT25DF321 spi flash support, which broken several Atmel EK
boards which this chip. So, add it

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-10-16 00:14:03 +05:30
Jagannadha Sutradharudu Teki
0c88a84ac6 sf: Add GPL-2.0+ SPDX-License-Identifier for missing ones
Added GPL-2.0+ SPDX-License-Identifier for missed sf
source files.

Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-10-16 00:14:01 +05:30
Jagannadha Sutradharudu Teki
469146c097 sf: Minor cleanups.
- Add comments.
- Renamed few macros.
- Add tabs.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-10-16 00:14:00 +05:30
Jagannadha Sutradharudu Teki
6152dd1528 sf_ops: Unify bank_sel calculation code
Unified the bank_sel calculation code for erase and
write ops.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-16 00:14:00 +05:30
Jagannadha Sutradharudu Teki
adbb5860e5 sf: ramtron: Remove page_size print
There is no page_size for ramtron flashes,
so just print the detected flash and it's size.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 19:35:09 +05:30
Jagannadha Sutradharudu Teki
ce22b922dd sf: Minor cleanups
- Add spaces, tabs
- Commenting.
- Rearrange code.
- Add static qualifier for missing func.
- Remove memory_map from ramtron.c
- Ramtron: spi_flash_internal.h -> sf_internal.h

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 19:34:56 +05:30
Poddar, Sourav
004f15b600 sf: Add memory mapped read support
Qspi controller can have a memory mapped port which can be used for
data read. Added support to enable memory mapped port read.

This patch enables the following:
- It enables exchange of memory map address between mtd and qspi
through the introduction of "memory_map" flag.
- Add support to communicate to the driver that memory mapped
 transfer is to be started through introduction of new flags like
"SPI_XFER_MEM_MAP" and "SPI_XFER_MEM_MAP_END".

This will enable the spi controller to do memory mapped configurations
if required.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-10-07 17:55:51 +05:30
Priyanka Jain
0ab449beec sf: probe: Add support for EN25S64
Add support for EON EN25S64 SPI flash.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:50 +05:30
Jagannadha Sutradharudu Teki
898e76c938 sf: Rename spi_flash files
Renamed:
spi_flash.c -> sf.c
spi_flash_internal.h -> sf_internal.h
spi_flash_ops.c -> sf_ops.c
spi_flash_probe.c -> sf_probe.c

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:50 +05:30
Jagannadha Sutradharudu Teki
a5e8199a13 sf: spi_flash cleanups
More cleanups on spi_flash side:
- Removed unneeded comments.
- Rearranged macros in proper location.
- Rearranged func declerations
- Renamed few function names.
- Added License headers.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:49 +05:30
Jagannadha Sutradharudu Teki
9719695b24 sf: probe: Add support for MX25L51235F
Add support for Macronix MX25L51235F SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:48 +05:30
Jagannadha Sutradharudu Teki
0665538632 sf: probe: Add support for MX25L25635F
Add support for Macronix MX25L25635F SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:48 +05:30
Jagannadha Sutradharudu Teki
532f2f111c sf: ops: Add static qualifier to spi_flash_cmd_bankaddr_write
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:48 +05:30
Jagannadha Sutradharudu Teki
3ea708f0d3 sf: probe: Print erase_size while printing flash details
Included erase_size while printing probed flash details.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:48 +05:30
Jagannadha Sutradharudu Teki
567901c8e0 sf: probe: Use print_size arg as page_size
Use flash->page_size arg in print_size() instead of
flash->sector_size while printing detected flas part details.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:47 +05:30
Jagannadha Sutradharudu Teki
af878522b5 sf: probe: Add support for S25FL512S_256K
Add support for Spansion S25FL512S_256K SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:47 +05:30
Jagannadha Sutradharudu Teki
f0be6ded71 sf: probe: Add support for S25FL256S_256K
Add support for Spansion S25FL256S_256K SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:46 +05:30
Jagannadha Sutradharudu Teki
fda41259b8 sf: probe: Add support for EN25Q64
Add support for EON EN25Q64 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:46 +05:30
Jagannadha Sutradharudu Teki
6af8dc3ebc sf: Remove unneeded flash drivers files
Now the common probing is handled in spi_flash_probe.c
hence removed the unneeded flash drivers.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:46 +05:30
Jagannadha Sutradharudu Teki
af1679bc30 sf: ramtron: Add support for separate flash driver
Compared to other spi flashes, ramtron has a different
probing and implementation on flash ops, hence moved
ramtron probe code into ramtron driver.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:46 +05:30
Jagannadha Sutradharudu Teki
32ebd1a7d5 sf: probe: Simply the BAR configuration logic
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:45 +05:30
Jagannadha Sutradharudu Teki
0f6232801c sf: probe: Add support for flag status polling
From Micron, 512MB onwards, flash requires to poll flag status
instead of read status- hence added E_FSR flag on spectific
flash parts.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:45 +05:30
Jagannadha Sutradharudu Teki
f4f51a8ff8 sf: probe: Add support for erase sector selection flag
SECT_4K, SECT_32K and SECT_64K opeartions are performed to
to specific flash by adding a SECT* flag on respective
spi_flash_params.flag param.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:45 +05:30
Jagannadha Sutradharudu Teki
54024c1566 sf: probe: Add support to clear flash BP# bits
Few of the flashes(Atmel, Macronix and SST) require to
clear BP# bits in flash power ups.

So clear these BP# bits at probe time, so-that the flash
is ready for user operations.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:44 +05:30
Jagannadha Sutradharudu Teki
10ca45d005 sf: probe: Add support for SST_WP
Most of the SST flashes needs to write up using SST_WP, AAI
Word Program, so added a flag param on spi_flash_params table.

SST flashes, which supports SST_WP need to use a WP write
sst_write_wp instead of common flash write.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:44 +05:30
Jagannadha Sutradharudu Teki
b7797422e3 sf: probe: Give proper spacing on flash table params
Given proper spacing between flash table params.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:44 +05:30
Jagannadha Sutradharudu Teki
a74db0a4f3 sf: probe: Add support for AT45DB* flash parts
Added AT45DB* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:44 +05:30
Jagannadha Sutradharudu Teki
26dcc5415b sf: probe: Add support for SST25* flash parts
Added SST25* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-10-07 17:55:43 +05:30
Jagannadha Sutradharudu Teki
74bec16eb5 sf: probe: Add support for S25FL* flash parts
Added S25FL* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:43 +05:30
Jagannadha Sutradharudu Teki
80701e54d3 sf: probe: Add support for W25* flash parts
Added W25* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:43 +05:30
Jagannadha Sutradharudu Teki
db7e258412 sf: probe: Add support for MX25L* flash parts
Added MX25L* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:42 +05:30
Jagannadha Sutradharudu Teki
18500e26ce sf: probe: Add support for GD25* flash parts
Added GD25* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:42 +05:30
Jagannadha Sutradharudu Teki
0d7663fe7d sf: probe: Add support for EN25Q* flash parts
Added EN25Q* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:42 +05:30
Jagannadha Sutradharudu Teki
53752c90e0 sf: probe: Add support for M25P* flash parts
Added M25P* parts are which are avilable in spi_flash_probe_legacy.c.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:42 +05:30
Jagannadha Sutradharudu Teki
4d4ec9927f sf: probe: Add new spi_flash_probe support
Added new spi_flash_probe support, currently added N25Q*
flash part attributes support.

Updated the sector_size attributes as per the flash parts.
Looks fine for with this sector_size for computing the size
of flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:41 +05:30
Jagannadha Sutradharudu Teki
4d5e29a680 sf: Divide spi_flash into multiple parts
Divided the spi_flash framework into mutiple parts for
- spi_flash.c:
        spi flash core file, interaction for spi/qspi driver to
        spi_flash framework.
- spi_flash_ops.c
        spi flash preffered operations, erase,write and read.
- spi_flash_probe.c
        spi flash probing, easy to extend probing functionality.

This change will support to extend the functionality in a
proper manner.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-07 17:55:41 +05:30
York Sun
bf90256623 SPDX-License-Identifier: clean up license header
This patch cleans up license header in these files:
	board/freescale/p1022ds/spl.c
	drivers/mmc/fsl_esdhc_spl.c
	drivers/mtd/spi/fsl_espi_spl.c

Signed-off-by: York Sun <yorksun@freescale.com>
2013-08-20 10:15:37 -07:00
Ying Zhang
fdf8529afc powerpc : spi flash : Support to start from eSPI with SPL
This patch introduces SPL to enable a loader stub that being loaded by
the code from the internal on-chip ROM. It loads the final uboot image
into DDR, then jump to it to begin execution.

The SPL's size is sizeable, the maximum size must not exceed the size of L2
SRAM. It initializes the DDR through SPD code, and copys final uboot image
to DDR. So there are two stage uboot images:
	* spl_boot, 96KB size. The env variables are copied to L2 SRAM, so that
	ddr spd code can get the interleaving mode setting in env. It loads
	final uboot image from offset 96KB.
	* final uboot image, size is variable depends on the functions enabled.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-08-20 09:47:47 -07:00
Jagannadha Sutradharudu Teki
04e15648ce sf: sst: Add support for SST25WF080
Add support for SST25WF080 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-07 01:10:04 +05:30
Jagannadha Sutradharudu Teki
5928b9a865 sf: Fix code cleanups
- CHECK: Alignment should match open parenthesis
- trailing whitespace

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-08-07 01:05:06 +05:30
Jagannadha Sutradharudu Teki
fd35ca5c20 sf: Fix code cleanup
- line over 80 characters.
- CHECK: Alignment should match open parenthesis

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-08-06 23:58:43 +05:30
Jagannadha Sutradharudu Teki
d0be616fe8 sf: stmicro: Fix code cleanup
- line over 80 characters
- foo * bar -> foo *bar
- removed unnecessary for single statement blocks.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-08-06 23:58:43 +05:30
Jagannadha Sutradharudu Teki
4f44148322 sf: sst: Fix code cleanup
- line over 80 characters
- add spaces
- add tabs

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-08-06 23:58:43 +05:30
Jagannadha Sutradharudu Teki
5a9109f657 sf: eon|spansion|ramtron: Fix code cleanup
- line over 80 characters
- insert the expression in same line

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-08-06 23:58:43 +05:30
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Tom Rini
f9c1456cf6 Merge branch 'master' of git://git.denx.de/u-boot-spi 2013-06-24 16:37:01 -04:00
Jagannadha Sutradharudu Teki
b9e31be0f8 sf: Warn to use BAR for > 16MiB flashes
Warning for > 16MiB flashes to #define CONFIG_SPI_FLASH_BAR

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:10:36 +05:30
Jagannadha Sutradharudu Teki
29fbfc10f4 sf: Add debug messages on spi_flash_read_common
- Added debug's on spi_flash_read_common()
- Added space

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:10:36 +05:30
Jagannadha Sutradharudu Teki
95e779e4f4 sf: Place the sf calls in proper order
Placed the sf calls in proper order - erase/write/read

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:10:36 +05:30
Jagannadha Sutradharudu Teki
acc237544a sf: Unify spi_flash write code
Move common flash write code into spi_flash_write_common().

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:10:35 +05:30
Jagannadha Sutradharudu Teki
615a156167 sf: Add flag status register polling support
Flag status register polling is required for micron 512Mb flash
devices onwards, for performing erase/program operations.

Like polling for WIP(Write-In-Progress) bit in read status register,
spi_flash_cmd_wait_ready will poll for PEC(Program-Erase-Control)
bit in flag status register.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:51 +05:30
Jagannadha Sutradharudu Teki
ba549de6c5 sf: Remove spi_flash_cmd_poll_bit()
There is no other call other than spi_flash_cmd_wait_ready(),
hence removed spi_flash_cmd_poll_bit and use the poll status code
spi_flash_cmd_wait_ready() itself.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:51 +05:30
Jagannadha Sutradharudu Teki
76e98d4817 sf: spansion: Add support for S25FL512S_64K
Add support for Spansion S25FL512S_64K SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:02:51 +05:30
Jagannadha Sutradharudu Teki
4e2904311d sf: stmicro: Add support for N25Q1024A
Add support for Numonyx N25Q1024A SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:02:51 +05:30
Jagannadha Sutradharudu Teki
221cb084ad sf: stmicro: Add support for N25Q1024
Add support for Numonyx N25Q1024 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:02:51 +05:30
Jagannadha Sutradharudu Teki
fd60c0ac31 sf: stmicro: Add support for N25Q512A
Add support for Numonyx N25Q512A SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:02:51 +05:30
Jagannadha Sutradharudu Teki
0569f3b9be sf: stmicro: Add support for N25Q512
Add support for Numonyx N25Q512 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:02:50 +05:30
Jagannadha Sutradharudu Teki
f76b1bd08b sf: Use spi_flash_addr() in write call
Use the existing spi_flash_addr() for 3-byte addressing
cmd filling in write call.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:50 +05:30
Jagannadha Sutradharudu Teki
1dcd6d0381 sf: Add bank addr code in CONFIG_SPI_FLASH_BAR
Defined bank addr code on CONFIG_SPI_FLASH_BAR macro, to reduce the
size for existing boards which has < 16Mbytes SPI flashes.

It's upto user which has provision to use the bank addr code for
flashes which has > 16Mbytes.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:50 +05:30
Jagannadha Sutradharudu Teki
fc207ee4db sf: Update sf read to support all sizes of flashes
This patch updated the spi_flash read func to support all
sizes of flashes using bank reg addr facility.

The same support has been added in below patch for erase/write
spi_flash functions:
"sf: Support all sizes of flashes using bank addr reg facility"
(sha1: c956f600cbb0943d0afe1004cdb503f4fcd8f415)

With these new updates on sf framework, the flashes which has < 16MB
are not effected as per as performance is concern and but the
u-boot.bin size incrased ~460 bytes.

sf update(for first 16MBytes), Changes before:
U-Boot> sf update 0x1000000 0x0 0x1000000
- N25Q256
  16777216 bytes written, 0 bytes skipped in 199.72s, speed 86480 B/s
- W25Q128BV
  16777216 bytes written, 0 bytes skipped in 351.739s, speed 48913 B/s
- S25FL256S_64K
  16777216 bytes written, 0 bytes skipped in 65.659s, speed 262144 B/s

sf update(for first 16MBytes), Changes before:
U-Boot> sf update 0x1000000 0x0 0x1000000
- N25Q256
  16777216 bytes written, 0 bytes skipped in 198.953s, speed 86480 B/s
- W25Q128BV
  16777216 bytes written, 0 bytes skipped in 350.90s, speed 49200 B/s
- S25FL256S_64K
  16777216 bytes written, 0 bytes skipped in 66.521s, speed 262144 B/s

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:50 +05:30
Jagannadha Sutradharudu Teki
e3ff9d51ec sf: Update sf to support all sizes of flashes
Updated the spi_flash framework to handle all sizes of flashes
using bank/extd addr reg facility

The current implementation in spi_flash supports 3-byte address mode
due to this up to 16Mbytes amount of flash is able to access for those
flashes which has an actual size of > 16MB.

As most of the flashes introduces a bank/extd address registers
for accessing the flashes in 16Mbytes of banks if the flash size
is > 16Mbytes, this new scheme will add the bank selection feature
for performing write/erase operations on all flashes.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:50 +05:30
Jagannadha Sutradharudu Teki
e612ddf593 sf: Read flash bank addr register at probe time
Read the flash bank addr register to get the state of bank in
a perticular flash. and also bank write happens only when there is
a change in bank selection from user.

bank read only valid for flashes which has > 16Mbytes those are
opearted in 3-byte addr mode, each bank occupies 16Mytes.

Suppose if the flash has 64Mbytes size consists of 4 banks like
bank0, bank1, bank2 and bank3.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:50 +05:30
Jagannadha Sutradharudu Teki
cf6b11dcda sf: Discover the bank addr commands
Bank/Extended addr commands are specific to particular
flash vendor so discover them based on the idocode0.

Assign the discovered bank commands to spi_flash members
so-that the bank read/write will use their specific operations.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-23 22:02:49 +05:30
Jagannadha Sutradharudu Teki
c9fcb59d7d sf: Add bank address register writing support
This patch provides support to program a flash bank address
register.

extended/bank address register contains an information to access
the 4th byte addressing in 3-byte address mode.

reff' the spec for more details about bank addr register
in Page-63, Table 8.16
http://www.spansion.com/Support/Datasheets/S25FL128S_256S_00.pdf

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2013-06-23 22:02:49 +05:30
Jagannadha Sutradharudu Teki
1e77deec6e sf: winbond: Add support for W25QXXXFV
Add support for Winbond W25QXXXFV SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-22 23:08:01 +05:30
Jagannadha Sutradharudu Teki
f0293fb595 sf: winbond: Add support for W25Q16DW
Add support for Winbond W25Q16DW SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-22 23:08:01 +05:30
Jagannadha Sutradharudu Teki
920559f19e sf: winbond: Add support for W25Q128FW
Add support for Winbond W25Q128FW SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-22 23:08:00 +05:30
Jagannadha Sutradharudu Teki
e9fd312088 sf: winbond: Update the names for W25Q 0x40XX ID's flash parts
Use the exact names for W25Q 0x40XX ID's flash parts, as the same
sizes of flashes comes with different ID's. so-that the distinguishes
becomes easy with this change.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-22 23:08:00 +05:30
Jagannadha Sutradharudu Teki
6fd1000224 sf: spansion: Correct name of S25FL128S 64K Sector part
Corrected the name of S25FL128S 64K sector part SPI flash,
S25FL128S supported has been added in below commit
"sf: spansion: Add support for S25FL128S"
(sha1: 1bfb9f156a)

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-22 23:08:00 +05:30
Tom Rini
348e47f766 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-06-22 07:38:12 -04:00
Albert ARIBAUD
69f14dc2fd Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Conflicts:
	spl/Makefile
2013-06-19 12:53:59 +02:00
Tom Rini
f0df254663 Merge branch 'master' of git://git.denx.de/u-boot-spi 2013-06-13 15:18:35 -04:00
Jagannadha Sutradharudu Teki
ea7fcc5aeb sf: winbond: Correct the nr_blocks used for W25Q32DW
This patch corrected the nr_blocks used for W25Q32DW SPI flash.

nr_blcoks are incorrectly assigned on below patch
"sf: winbond: add W25Q32DW"
(sha1: 772ba15474)

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-13 23:42:46 +05:30
Jagannadha Sutradharudu Teki
fc2d721992 sf: winbond: Add support for W25Q80BW
Add support for Winbond W25Q80BW SPI flash.

This patch corrected the flash name, nr_blocks and
also commit message header from below patch.
"sf: winbond: add W25Q32"
(sha1: c969abc470)

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-13 23:42:46 +05:30
Jagannadha Sutradharudu Teki
59120ca365 sf: spansion: Update the name for S25FL256S flash
As the per the ID tabl the flash is under Uniform 64-kB sector
architecture, hence updated with proper name.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-06-13 23:42:46 +05:30
Jagannadha Sutradharudu Teki
60b6614ac8 cmd_sf: Add print mesgs on sf read/write commands
This patch adds a print messages while using 'sf read' and
'sf write' commands to make sure that how many bytes read/written
from/into flash device.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Tom Rini <trini@ti.com>
2013-06-03 00:04:41 +05:30
Jagannadha Sutradharudu Teki
96bbf55651 cmd_sf: Add print mesg for 'sf erase' command
This patch adds a print messages while using 'sf erase' command
to make sure that how many bytes erased in flash device.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Tom Rini <trini@ti.com>
2013-06-03 00:04:40 +05:30
Jagannadha Sutradharudu Teki
0d3b596aa3 sf: Fix sf read for memory-mapped SPI flashes
Missing return after memcpy is done for memory-mapped SPI flashes,
hence added retun 0 after memcpy done.

The return is missing in below patch
"sf: Enable FDT-based configuration and memory mapping"
(sha1: bb8215f437)

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-06-03 00:04:40 +05:30
Kuo-Jung Su
ed03f41778 sf: winbond: Add support for W25PXX SPI flash
Add support for Winbond's W25PXX SPI flash.
These devices is used on Faraday A369 evaluation board.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
CC: Tom Rini <trini@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-28 13:09:04 +05:30
Jagannadha Sutradharudu Teki
47ccaa2e7d sf: winbond: Add support for W25Q256
Add support for Winbond W25Q256 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-28 13:08:47 +05:30
Marek Vasut
e90f7bde15 sf: spansion: Add Spansion S25FL064P IDs
This is a S25FL064A successor. It supports up to 104MHz bus
speed.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Wolfgang Denk <wd@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-05-28 12:48:57 +05:30
Xie Xiaobo
1bfb9f156a sf: spansion: Add support for S25FL128S
SPANSION recommend S25FL128S supersedes S25FL129P, and the two flash
memory have the same device ID and Memory architecture. So they can
use the same config parameters.

Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-24 16:54:13 -05:00
Rajeshwari Shinde
f10b4c0e65 SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
This patch adds driver for the gigabyte devices
GD25LQ and GD25Q64B required for Snow Board.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-05-20 13:47:22 +09:00
Albert ARIBAUD
009d75ccc1 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	drivers/spi/tegra20_sflash.c
	include/fdtdec.h
	lib/fdtdec.c
2013-03-28 18:50:01 +01:00
Allen Martin
772ba15474 sf: winbond: add W25Q32DW
Add support for Winbond W25Q32DW 32Mbit part

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-03-25 09:56:06 -07:00
Simon Glass
bb8215f437 sf: Enable FDT-based configuration and memory mapping
Enable device tree control of SPI flash, and use this to implement
memory-mapped SPI flash, which is supported on Intel chips.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:37 -07:00
Simon Glass
1e566bc6db sf: Respect maximum SPI write size
Some SPI flash controllers (e.g. Intel ICH) have a limit on the number of
bytes that can be in a write transaction. Support this by breaking the
writes into multiple transactions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:37 -07:00
Simon Glass
c0f87dd4ff sf: Use spi_flash_alloc() in each SPI flash driver
Rather than each device having its own way to allocate a SPI flash
structure, use the new allocation function everywhere. This will make it
easier to extend the interface without breaking devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:36 -07:00
Simon Glass
b5aec1424d sf: Add spi_flash_alloc() to create a new SPI flash struct
At present it is difficult to extend the SPI flash structure since
all devices allocate it themselves, and few of them zero all fields.
Add a new function spi_flash_alloc() which can be used by SPI devices
to perform this allocation, and thus ensure that all devices can
better cope with SPI structure changes.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:36 -07:00
Jagannadha Sutradharudu Teki
d62ef5619c sf: stmicro: Add support for N25Q256A
Add support for Numonyx N25Q256A SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-06 10:10:00 -05:00
Jagannadha Sutradharudu Teki
b1431dac32 sf: stmicro: Add support for N25Q32A
Add support for Numonyx N25Q32A SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-06 10:10:00 -05:00
Jagannadha Sutradharudu Teki
c75c92122f sf: stmicro: Add support for N25Q32
Add support for Numonyx N25Q32 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-06 10:10:00 -05:00
Jagannadha Sutradharudu Teki
f785fcb631 sf: stmicro: Add support for N25Q64A
Add support for Numonyx N25Q64A SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-06 10:10:00 -05:00
Jagannadha Sutradharudu Teki
5818a09d70 sf: winbond: Add W25Q64W
Add support for Winbond's W25Q64W SPI flash.
This device is used on xilinx zynq emulation platform.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-06 10:10:00 -05:00
Jagannadha Sutradharudu Teki
4e994c168f sf: spansion: Correct the first byte of idcode1 for S25FL256S part
This patch corrected the first byte of idcode1 for S25FL256S SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-06 10:10:00 -05:00
Jagannadha Sutradharudu Teki
3981d02e0b sf: stmicro: add support for N25Q064
Add support for Numonyx N25Q064 SPI flash.

Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2013-02-04 09:14:21 -05:00
Albert ARIBAUD
1c27059a2f Merge remote-tracking branch 'u-boot/master' 2012-09-30 23:49:17 +02:00
Tom Rini
a4cc1c4877 SPL: SPI: Enhance spi_spl_load to match the other load functions
Signed-off-by: Tom Rini <trini@ti.com>
2012-09-27 11:20:27 -07:00
Bo Shen
83fd09a049 spiflash: at25: using common spi flash operation
Using common spi flash operation function to replace private operation
funtion

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-17 19:00:31 +02:00
Bo Shen
053a4d1f5d spi: add atmel at25df321 serial flash support
Add atmel at25df321 serial flash support

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2012-09-17 18:50:47 +02:00
Michal Simek
4a4cb4e111 sf: spansion: Add support for S25FL256S
Add support for Spansion S25FL256S SPI flash.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-14 11:45:50 -04:00
Stephen Warren
c75942c7b7 sf: winbond: fix page_size
Commit a4ed3b6 "sf: inline data constants" modified winbond.c's page_size
from 256 to 4096. This prevents either/both of "sf write" writing the
correct data, or "sf read" from reading the correct data back.

This allows U-Boot running on Compulab Tegra to upgrade itself.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-14 11:34:30 -04:00
Michal Simek
d945ce9704 sf: stmicro: add support for N25Q128A
Add support for Numonyx N25Q128A SPI flash.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-10 11:31:04 -04:00
Stephan Linz
6ad6c6dc1e sf: stmicro: add support N25Q128 parts
Adds support for Numonyx's N25Q128 SPI flash. These devices
are used on (among others) Avnet Spartan-6 LX9 micro-evaluation
boards. Tested with "sf" commands and CONFIG_ENV_IS_IN_SPI_FLASH.

Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 20:41:54 -04:00
Stephan Linz
63ff6a66ae sf: stmicro: support JEDEC standard two-byte signature
There are more than the M25Pxx serial flashs that can be
used with the stmicro driver, for example: the M25PXxx or
N25Qxx serie. All these chips have burned in the original
stmicro manufacture id 0x20 together with a standard
two-byte signature.

In preperation to support all these chips the stmicro driver
have to decode the full two-byte signature.

Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 20:41:54 -04:00
Rajeshwari Shinde
c969abc470 sf: winbond: add W25Q32
SMDK EVT1  has a different Winbond part, added its part details
to the SPI flash table.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-08-09 20:41:54 -04:00
Jérôme Carretero
b54d1f26ff sf: stmicro: add geometrical info for N25Q256 from Micron
Note: because 4-byte addressing is not supported yet,
at the moment only the first 16MiB of the device are available.

Signed-off-by: Jérôme Carretero <cJ@zougloub.eu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-04-08 10:55:55 +00:00
Mike Frysinger
41e1713425 sf: unify status register writing (and thus block unlocking)
The only two drivers to write the status register do it in the same
way, so unify the implementations.  This also makes the block unlock
logic the same.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:18:17 -05:00
Mike Frysinger
7a6d2a7ec1 sf: sst: inline duplicate write enable helper funcs
The local sst enable/disable write funcs don't really add anything
over the common API, so just inline the common calls directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:12:23 -05:00
Mike Frysinger
04a3e90eaf sf: eon: drop duplicate id
Looks like Shaohui Xie's patch got merged twice.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 23:08:37 -05:00
Mike Frysinger
c4e932ce73 sf: unify erase commands
Analysis of the flash drivers shows that they all use 0x20 if the erase
size is 4KiB, or 0xd8 if it's larger.  So with this info in hand, we can
unify all the erase functionality in one place.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 22:35:50 -05:00
Mike Frysinger
a4ed3b6531 sf: inline data constants
I imagine much of these constants are due to copy & pasting previous
drivers rather than an actual reflection of the hardware layout.  At
any rate, inline the info that we don't care about externally as it
shrinks things nicely.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-04 22:56:52 -05:00
Mike Frysinger
7d72b80a90 sf: spansion: inline useless id defines
No need for dedicated defines when these really only get used once.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-20 00:41:36 -04:00
Mike Frysinger
b4c87d658c sf: drop unused/duplicate command defines
In an effort to unify the spi flash drivers further, drop all the
unused and/or duplicate command defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-20 00:41:36 -04:00
Stephen Warren
1edaf094dc sf: winbond: Add support for the Winbond W25Q80BL
This chip is present on the Compulab TrimSlice.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-07-07 14:07:20 +02:00
Mike Frysinger
8b463dab93 sf: eeprom_m95xxx: set a sane default timeout
Every board currently defines this to the same value, so just default
to that to avoid having to make everyone do the same thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:18:28 -05:00
Mike Frysinger
a1f77b696d sf: eeprom_m95xxx: fix up style
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-02-12 15:18:28 -05:00
Christian Riesch
32b1127397 sf: Add spi_boot() to allow booting from SPI flash in an SPL
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Heiko Schocher <hs@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-24 10:23:30 +01:00
Vadim Bendebury
1f6734cf50 sf: fix erase debug output
We want to show the length, so multiplying by sector size makes no sense.
This is a hold over from the erase code before the big refactor.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-05 21:55:24 +01:00
Shaohui Xie
23d8f778c8 spi/eon: add support for new EON spi flash EN25Q32B
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
2011-10-23 23:32:43 +02:00
Shaohui Xie
bd75c63a94 sf: eon: add support for EN25Q32B parts
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-29 16:51:16 -04:00
Vadim Bendebury
3f96ee3347 sf: fix debug format string warning
On some systems, we get a warning when %lu is used with size_t's, so
use the correct format string.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-21 23:05:15 +02:00
James Le Cuirot
ad8e3bd657 sf: winbond: Add support for the Winbond W25X40
The Winbond W25X40 is now being used in the IP02 (and possibly IP04).
Tested and working on the actual device.
2011-09-05 16:03:00 +02:00
Simon Guinot
7432ed05a3 sf: macronix: disable write protection when initializing
Signed-off-by: Simon Guinot <sguinot@lacie.com>
2011-08-02 22:02:34 +02:00
Shaohui Xie
9445ce0873 sf: spansion: add support for S25FL129P_64K
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Cc: Mike Frysinger <vapier@gentoo.org>
2011-08-02 22:01:27 +02:00
Macpaul Lin
2d722e0549 mtd/spi/macronix.c: add MX25L4005 and MX25L8005
Add support of MX25L4005 and MX25L8005 according to the datasheet
http://www.mct.net/download/macronix/mx25l8005.pdf

This patch has been tested with MX25L4005 and MX25L8005

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
2011-08-02 21:54:40 +02:00
Mike Frysinger
8875bdb341 sf: sst: support newer standardized flashes
Newer SST flashes have dropped the Auto Address Increment (AAI) word
programming (WP) modes in favor of the standard page programming mode
that most flashes now support.  So add a flags field to the different
flashes to support both modes with new and old styles.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:32:59 +02:00
Mike Frysinger
66ecb7cdb0 sf: unify write disable commands
Every spi flash uses the same write disable command, so unify this in
the common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Fixed commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-07-26 16:32:15 +02:00
Mike Frysinger
fba2c44e46 sf: eon/stmicro: inline useless ID defines
These defines are used in only one place, so just inline them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:31:07 +02:00
Mike Frysinger
b06afa75fa sf: kill off now-unused local state
Now that the common spi_flash structure tracks all the info that these
drivers need, kill off their local state indirection and use just what
the common code provides.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:29:59 +02:00
Mike Frysinger
d4aa500913 sf: unify write funcs
Once we add a new page_size field for write lengths, we can unify the
write methods for most of the spi flash drivers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:29:27 +02:00
Mike Frysinger
2744a4e688 sf: unify write enable commands
Every spi flash uses the same write enable command, so unify this in
the common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-26 16:28:21 +02:00
Graeme Russ
a60d1e5b8e Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-07-16 11:55:00 +02:00
Patrick Sestier
bd0d19cc5f sf: kick watchdog when polling
The status polling can take a while, so make sure we kick the
watchdog after each successful poll.

Signed-off-by: Patrick Sestier <psestier@mircom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-01 22:21:42 +02:00
James Kosin
1c091f59a0 sf: sst: add support for SST25VF064C
Signed-off-by: James Kosin <jkosin@intcomgrp.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 15:39:08 -04:00
Mike Frysinger
493c360721 sf: use print_size() for sector_size output
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:30:25 -04:00
Mike Frysinger
f8f0757dcb sf: localize erase funcs
No need for these to be exported as they are only accessed indirectly
via function pointers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:56 -04:00
Mike Frysinger
c5910874ba sf: sst: setup read func
The previous unification patch missed setting up the sst read func.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:54 -04:00
Richard Retanubun
4e6a515899 sf: add struct spi_flash.sector_size parameter
This patch adds a new member to struct spi_flash (u16 sector_size)
and updates the spi flash drivers to start populating it.

This parameter can be used by spi flash commands that need to round
up units of operation to the flash's sector_size.

Having this number in one place also allows duplicated code to be
further collapsed into one common location (such as erase parameter
and the detected message).

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12 02:15:37 -04:00
Mike Frysinger
cdb6a00fb8 sf: atmel: undo unification of status polling
The AT45 flashes are completely different (at the command set and
status register level) from all other SPI flashes, so we can't unify
their logic with common code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 23:41:09 -04:00
Mike Frysinger
a4c3b40b33 sf: unify read functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:55 +02:00
Mike Frysinger
e7b44eddbe sf: unify erase functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:54 +02:00
Mike Frysinger
6163045bcd sf: unify status polling for ready bit
All of the spi flash drivers implement the status register polling for
detecting the device ready state, so unify them all in a new helper
function -- spi_flash_wait_ready.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:53 +02:00
Mike Frysinger
000044d8bf sf: unify read/write helpers
These functions largely do the same exact thing, so unify them all
into one basic function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-11 21:00:49 +02:00
Wojtek Skulski
93eab86bfd sf: winbond: add support for W25Q16/32/128 parts
While we're here, cut out the useless id defines too.

Signed-off-by: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 08:53:55 -05:00
Chong Huang
d1d9065647 sf: new driver for EON devices
Signed-off-by: Chong Huang <chuang@ucrobotics.com>
Signed-off-by: Haitao Zhang <minipanda@linuxrobot.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-17 08:53:55 -05:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Reinhard Meyer
e0987e251f sf: ramtron: new spi fram driver
Supports most types that support Read-Id and the FM25H20.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-11-10 04:26:18 -05:00
Reinhard Meyer
0d3fe2b153 sf: turn probe switch into a lookup table
This allows for arbitrarily long manufacturer ids following the JEDEC
standard of 0x7f continuation bytes.  It also makes adding new entries
easier as it's just one element in an array.  The downside is that it
increases code size a bit, but we're talking ~50 bytes.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-12 21:08:25 -04:00
David Jander
ff0dc2c433 sf: spansion: add support for S25FL032P parts
This patch introduces an extra mask-field in spansion_spi_flash_params
to support flash chips with 1-byte extended ID (like the S25FL032P).

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-06 20:50:38 -04:00
Marc-André Hébert
c3cb09207f sf: spansion: fixing erasing when sector size >64KiB
The spansion_erase currently only works when the sector size is 64KB.
cmd[1] should contain the higher 8 bit of the 24 bit address of the
sector to be erased. Currently it is holding the sector index to be
erased which happens to be the same thing when the sector size is
64KB.

Signed-off-by: Marc-Andre Hebert <marc-andre.hebert@humanware.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-06 20:50:38 -04:00
Graeme Smecher
74f9e0d8a0 sf: winbond: add support W25Q64 parts
Adds support for Winbond's W25Q64 SPI flash. These devices are used on
(among others) Xilinx' SP601 and SP605 Spartan-6 evaluation boards.
Tested with "sf" commands.

Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-06 03:34:10 -04:00
Mike Frysinger
b376bbb49f sf: move useful messages from debug to printf
At the moment, the default SPI flash subsystem is quite terse.  Errors and
successes both result in a generic message.  So move the useful errors and
useful successes to printf output by default.

While we're here, also convert the messages to use print_size().

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00
Thomas Chou
12c2e3bbbe spi_flash: support old STMicro parts with RES
Some old STMicro parts do not support JEDEC ID (0x9f). This patch
uses RES (0xab) to get Electronic ID and translates it to JEDEC ID.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 23:47:08 -04:00
Albin Tonnerre
f852a0c3bf drivers/mtd/spi/eeprom_m95xxx.c: add missing error checking
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
2010-04-09 23:05:54 +02:00
Mike Frysinger
fcffb680e7 sf: fix stmicro offset setup while erasing
Reported-by: Peter Gombos <gombos@protecta.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-22 23:56:36 +01:00
Jason McMullan
d394a77950 sf: new driver for Winbond W25X16/32/64 devices
Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-22 23:54:18 +01:00
Mike Frysinger
4166ee58d3 sf: add GPL-2 license info
Some of the new spi flash files were missing explicit license lines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-10-24 22:44:18 +02:00
Jean-Christophe PLAGNIOL-VILLARD
a3c5057a6c eeprom_m95xxx: remove unused variable i
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-08-21 23:36:19 +02:00
Albin Tonnerre
3ac374c0f0 Add driver for the ST M95xxx SPI EEPROM
This chip is used in a number of boards manufactured by Calao-Systems
which should be supported soon. This driver provides the necessary
spi_read and spi_write functions necessary to communicate with the chip.

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
2009-08-09 23:45:14 +02:00
Prafulla Wadaskar
2efee52b09 sf: Macronix additional chips supported
new chips supported:-
MX25L1605D, MX25L3205D, MX25L6405D, MX25L12855E
out of which MX25L6405D and MX25L12855E tested on Kirkwood platforms

Modified the Macronix flash support to use 2 bytes of device id instead of 1
This was required to support MX25L12855E

Signed-off-by: Piyush Shah <spiyush@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-06 18:46:20 -04:00
Mike Frysinger
dd54126715 sf: sst: add sst25vf###b ids
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-06 18:46:20 -04:00
Mike Frysinger
7d907f0ea9 sf: sst: fix sector size
Looks like when I was encoding the sector sizes, I forgot to divide by 8
(due to the stupid marketing driven process that declares all sizes in
useless megabits and not megabytes).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-06 18:46:20 -04:00
Prafulla Wadaskar
7ce6031afc sf: new Macronix MX25xx SPI flash driver
Added macronix SF driver for MTD framework
MX25L12805D is supported and tested
TBD: sector erase implementation, other deivces support

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 20:47:18 +02:00
Todor I Mollov
2a6cc58869 sf: atmel: implement power-of-two write/erase funcs
Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-06-12 20:47:18 +02:00
Mike Frysinger
d9596ffbdc sf: stmicro: dont send 4 bytes when reading status register
I can't find anywhere in the datasheet that says the status register needs
3 dummy bytes sent to it before being able to read back the first real
result.  Tests on a Blackfin board show that after writing the opcode, the
status register starts coming back immediately.  So only write out the
read status register opcode before polling the result.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Jason McMullan <mcmullan@netapp.com>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2009-04-02 12:51:28 -04:00
Mike Frysinger
1abe365ffc sf: set common timeouts in seconds, not milliseconds
Since timeouts are only hit when there is a problem in the system, we
don't want to prematurely timeout on a functioning setup.  Thus having
low timeouts (in milliseconds) doesn't gain us anything in the production
case, but rather increases likely hood of causing problems where none
otherwise exist.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 08:11:31 -04:00
Mike Frysinger
2a6ce1115b sf: stmicro: use common page timeout define
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:51:55 -04:00
Mike Frysinger
0dcdbb172c sf: always read 5 bytes for the idcode
Some SPI flash drivers like to have extended id information available
(like the spansion flash), so rather than making it re-issue the ID cmd
to get at the last 2 bytes, have the common code read 5 bytes rather than
just 3.  This also matches the Linux behavior where it always reads 5 id
bytes from all flashes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
CC: Mingkai Hu <Mingkai.hu@freescale.com>
2009-04-02 06:50:21 -04:00
Mike Frysinger
9726ba4aba sf: stmicro: drop redundant id read
The common SPI flash code reads the idcode and passes it down to the SPI
flash driver, so there is no need to read it again ourselves.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
CC: Jason McMullan <mcmullan@netapp.com>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2009-04-02 06:50:17 -04:00
Mike Frysinger
1c5874374e sf: add driver for SST flashes
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:49:58 -04:00
Mike Frysinger
f773a1bbdb sf: drop DEBUG defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-04-02 06:49:49 -04:00
Jean-Christophe PLAGNIOL-VILLARD
6b850a9fa8 mtd: add some at45 spi flash support
- AT45DB321D
 - AT45DB161D
 - AT45DB081D
 - AT45DB041D
 - AT45DB021D
 - AT45DB011D

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:49:38 -04:00
Mingkai Hu
6805e4bf83 mtd: SPI Flash: Support the Spansion Flash
Add MTD SPI Flash support for S25FL008A, S25FL016A,
S25FL032A, S25FL064A, S25FL128P.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:49:30 -04:00
Brad Bozarth
68f8718df2 spi flash: fix crash due to spi flash miscommunication
Higher spi flash layers expect to be given back a pointer that was
malloced so that it can free the result, but the lower layers return
a pointer that is in the middle of the malloced memory. Reorder the
members of the lower spi structures so that things work out.

Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-24 01:57:40 +01:00
Mike Frysinger
84bc72d90c spi/stmicro: fix debug() display of cmd
The stmicro_wait_ready() func tries to show the actual opcode that was sent
to the device, but instead it displays the array pointer.  Fix it to pull
out the opcode from the start of the array.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-12-16 00:48:18 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
TsiChung Liew
7b7a869a8b mtd: SPI Flash: Support the STMicro Flash
Add MTD SPI Flash support for M25P16, M25P20, M25P32,
M25P40, M25P64, M25P80, M25P128.

Signed-off-by: Jason McMullan <mcmullan@netapp.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-09-09 11:57:29 -06:00
Stefan Roese
f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
Haavard Skinnemoen
d25ce7d24c SPI Flash subsystem
This adds a new SPI flash subsystem.

Currently, only AT45 DataFlash in non-power-of-two mode is supported,
but some preliminary support for other flash types is in place as
well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-03 20:31:34 +02:00