Commit graph

12 commits

Author SHA1 Message Date
Ben Warren
89973f8a82 Introduce netdev.h header file and remove externs
This addresses all drivers whose initializers have already
been moved to board_eth_init()/cpu_eth_init().

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2008-09-02 21:18:16 -07:00
Haavard Skinnemoen
b8ec9fb736 Merge branch 'eth-cleanup' of git://git.denx.de/u-boot-avr32 2008-07-30 10:07:02 +02:00
Ben Warren
c8c845cfdc Moved initialization of AVR32 Ethernet controllers to board_eth_init()
Renamed initialization functions for atngw100 and atstk1000.
Removed initializations for these boards from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-24 12:37:26 +02:00
Haavard Skinnemoen
7f4b009f42 avr32: Fix printf() format warnings
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-23 16:15:01 +02:00
Haavard Skinnemoen
5f723a3b98 avr32: Enable SPI flash support on ATNGW100
The ATNGW100 has 8MB DataFlash on board. Give users access to it through
the new SPI flash framework.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-20 12:46:48 +02:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Haavard Skinnemoen
a23e277c4a avr32: Rework SDRAM initialization code
This cleans up the SDRAM initialization and related code a bit, and
allows faster booting.

  * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
  * Remove memory test from sdram_init() and make caller responsible
    for verifying the SDRAM and determining its size.
  * Remove base_address member from struct sdram_config (was sdram_info)
  * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
  * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:31 +02:00
Haavard Skinnemoen
caf83ea888 avr32: Use the same entry point for reset and exception handling
Since the reset vector is always aligned to a very large boundary, we
can save a couple of KB worth of alignment padding by placing the
exception vectors at the same address.

Deciding which one it is is easy: If we're handling an exception, the
CPU is in Exception mode. If we're starting up after reset, the CPU is
in Supervisor mode. So this adds a very minimal overhead to the reset
path (only executed once) and the exception handling path (normally
never executed at all.)

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:30 +02:00
Haavard Skinnemoen
44453b25b0 avr32: Clean up the HMATRIX code
Rework the HMATRIX configuration interface so that it becomes easier
to configure the HMATRIX for boards with special needs, and add new
parts.

The HMATRIX header file has been split into a general,
chip-independent part with register definitions, etc. and a
chip-specific part with SFR bitfield definitions and master/slave
identifiers.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Haavard Skinnemoen
781eb9a1e4 avr32: Get rid of the .flashprog section
The .flashprog section was only needed back when we were running
directly from flash, and it's even more useless on NGW100 since it
uses the CFI flash driver which never used this workaround in the
first place.

Remove it on STK1000 as well, and get rid of all the associated code and
annotations.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Haavard Skinnemoen
d38da53794 AVR32: Make SDRAM refresh rate configurable
The existing code assumes the SDRAM row refresh period should always
be 15.6 us. This is not always true, and indeed on the ATNGW100, the
refresh rate should really be 7.81 us.

Add a refresh_period member to struct sdram_info and initialize it
properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
panic() until the refresh_period member is updated properly.

Big thanks to Gerhard Berghofer for pointing out this issue.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05 12:14:27 +01:00
Haavard Skinnemoen
6b44394442 AVR32: ATNGW100 board support
Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-18 09:53:18 +01:00