Commit graph

1758 commits

Author SHA1 Message Date
Simon Glass
73c5c39997 Makefile: Drop unnecessary -dtb suffixes
When OF_CONTROL is enabled, u-boot-dtb.* files are the same as u-boot.*
files. So we can use the latter for simplicity.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 20:55:52 -05:00
Simon Glass
dae6e7bf50 Makefile: Make u-boot.img the same as u-boot-dtb.img
Create u-boot.img even when OF_CONTROL is enabled, so that this file can be
used in both cases.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 20:55:50 -05:00
Simon Glass
bd7dc3883b socfpga: Simplify Makefile filenames
We don't need the -dtb suffix anymore, so drop it.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 20:55:48 -05:00
Simon Glass
a9d78260a8 tegra: Always build a boot image with the same filename
Adjust the Makefile to build u-boot-tegra.bin which contains a device tree
if OF_SEPARATE is enabled, and does not if not. This mirrors U-Boot's new
approach of using u-boot.bin to handle both cases.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 20:55:43 -05:00
Simon Glass
ad1ecd2063 fdt: Build a U-Boot binary without device tree
At present u-boot.bin holds the plain U-Boot binary without the device tree.
This is somewhat annoying since you need either u-boot.bin or u-boot-dtb.bin
depending on whether device tree is used.

Adjust the build such that u-boot.bin includes a device tree (if enabled),
and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin remains
the same.

This should be acceptable since:

- without OF_CONTROL, u-boot.bin still does not include a device tree
- with OF_CONTROL, u-boot-dtb.bin does not change

The main impact is build systems which are set up to use u-boot.bin as
the output file and then add a device tree. These will have to change to use
u-boot-nodtb.bin instead.

Adjust tegra rules so it continues to produce the correct files.

Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 20:55:32 -05:00
Simon Glass
580cc03312 tegra: Clarify generation of -nodtb file with OF_CONTROL
Fix the ALL-y logic in the Makefile so that is clear that we always want
the -nodtb file.

Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-01 20:55:13 -05:00
Simon Glass
72a8cf8dcc Move all command code into its own directory
There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-25 10:39:43 -05:00
Masahiro Yamada
8b7fb78d48 kbuild: drop workaround for old style CONFIG_SYS_TEXT_BASE defines
Now, there is no board defining CONFIG_SYS_TEXT_BASE by its config.mk,
so this workaround is no longer needed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stefan Roese <sr@denx.de>
2016-01-20 10:19:37 -05:00
Stefan Roese
f4db6c976c arm: mvebu: Add runtime detection of UART (xmodem) boot-mode
This patch adds runtime detection of the Marvell UART boot-mode (xmodem
protocol). If this boot-mode is detected, SPL will return to the
BootROM to continue the UART booting.

With this patch its now possible, to generate a U-Boot image that
can be booted either from the strapped boot-device (e.g. SPI NOR, MMC,
etc) or via the xmodem protocol from the UART. In the UART case,
the kwboot tool will dynamically insert the UART boot-device type
into the image. And also patch the load address in the header, so
that the mkimage header will be skipped (as its not expected by the
Marvell BootROM).

This simplifies the development for Armada XP / 38x based boards.
As no special images need to be generated by selecting the
MVEBU_BOOTROM_UARTBOOT Kconfig option.

Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any
more, its now completely removed.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
2016-01-14 14:08:59 +01:00
Tom Rini
fa85e826c1 Prepare v2016.01
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-12 09:06:54 -05:00
Aneesh Bansal
c2b233cbec arm, Makefile: correct compilation flag for u-boot-dtb
The compilation of u-boot-dtb.img should be controlled by
CONFIG_OF_CONTROL and not CONFIG_DM.
CONFIG_DM may be defined even without Device Tree requirement.

This was added in commit 947cee1127.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
CC: Alison Wang <alison.wang@freescale.com>
2016-01-08 10:15:43 -05:00
Tom Rini
7cd1a1235b Prepare v2016.01-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-04 16:37:15 -05:00
Tom Rini
f84c2b665b Prepare v2016.01-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-21 21:07:04 -05:00
Tom Rini
8356431bf8 Prepare v2016.01-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-12-07 14:23:45 -05:00
Nathan Rossi
08598d6ee9 ARM: zynq: Add target for building bootable SPL image for Zynq
Add a build target to generate 'boot.bin' which includes SPL. This is
used by the platforms BootROM to load SPL directly.

This change also conditionally changes what the 'boot.bin' target
generates depending on the SoC. Leaving the behaviour unchanged for the
AT91 targets.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-19 13:09:21 +01:00
Tom Rini
3d4825446e Prepare v2016.01-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-16 20:29:51 -05:00
Tom Rini
cad0499071 Merge branch 'master' of git://git.denx.de/u-boot-arm 2015-11-10 13:38:08 -05:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Albert ARIBAUD
62e92077a8 arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD
When building a Thumb-1-only target with CONFIG_SYS_THUMB_BUILD,
some files fail to build, most of the time because they include
mcr instructions, which only exist for Thumb-2.

This patch introduces a Kconfig option CONFIG_THUMB2 and uses
it to select between Thumb-2 and ARM mode for the aforementioned
files.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2015-11-10 15:03:48 +01:00
Alison Wang
947cee1127 arm: ls1021a: Add QSPI or IFC support in SD boot
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in
SD boot now. For the customer's demand, QSPI needs to be supported in SD
boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is
used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is
used to support QSPI in SD boot.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-26 09:09:57 -07:00
Tom Rini
858dbdf841 Merge git://git.denx.de/u-boot-x86 2015-10-21 20:47:40 -04:00
Bin Meng
a34b46768f Makefile: Generate U_BOOT_DMI_DATE for SMBIOS
Add U_BOOT_DMI_DATE (format mm/dd/yyyy) generation to be used by
SMBIOS tables, as required by SMBIOS spec 3.0 [1]. See chapter 7.1,
BIOS information structure offset 08h for details.

[1] http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.0.0.pdf

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Stefan Roese
9cffb2335c arm: mvebu: Add DM (driver model) support
This patch adds driver model support for some Marvell MVEBU SoC's. Including
Armada XP and 38x. All 3 currently mainlined boards are converted. DM is now
selected automatically for MVEBU platforms.

With this DM support now available for MVEBU, hardcoding the base addresses
and other information is not necessary any more. Probing should be done
by using the values provided via the device tree now instead. For this
the driver also need to be converted to DM. Patches for some of the drivers
will follow.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-21 02:25:01 +02:00
Stefan Roese
944c7a3176 arm: mvebu: Add option to use UART xmodem protocol via kwboot
This patch enables the use of the kwboot tool, to boot mainline U-Boot
on the Marvell Armada XP/38x SoC's. This is done by returning to the
SoC's BootROM after SPL has initialized the SDRAM. We need to make sure
to not reconfigure the internal register space and MBARs. Otherwise
the BootROM will not be able to continue after SPL jumps back to it.

To use this feature, please don't forget to change the BOOT_FROM line
in your board specfic kwbimage.cfg file this way:

    BOOT_FROM uart

Tested on these Marvell eval boards:
DB-MV784MP-GP - Armada XP
DB-88F6820-GP - Armada 38x

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-10-21 02:25:00 +02:00
Tom Rini
5ec0003b19 Prepare v2015.10
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 19:59:38 -04:00
Tom Rini
87a9595709 Prepare v2015.10-rc5
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-12 11:14:27 -04:00
Tom Rini
1f8836396d Prepare v2015.10-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-09-28 16:57:42 -04:00
Tom Rini
efde6a579f Prepare v2015.10-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-09-07 08:56:35 -04:00
Andreas Bießmann
2d9efa1227 Makefile: fix SOURCE_DATE_EPOCH for *BSD host
The SOURCE_DATE_EPOCH mechanism for reproducible builds require some date(1)
with -d switch to print the relevant date and time strings of another point of
time.

In other words it requires some date(1) that behaves like the GNU date(1) [1].
The BSD date(1) [2] on the other hand has the same switch but with a different
meaning.

Respect this and check the date(1) abilities before usage, error on non
working version.  Use the well known pre- and suffixes for the GNU variant of
a tool on *BSD hosts to search for a working date(1) version.

[1] http://man7.org/linux/man-pages/man1/date.1.html [2]
http://www.freebsd.org/cgi/man.cgi?query=date

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-28 12:33:19 -04:00
Nishanth Menon
cd43ddc019 ARM: keystone2: move the custom build rules out to keystone specific makefile
Keystone has build rules introduced by commit ef509b9063 ("k2hk: add
support for k2hk SOC and EVM") and commit 0e7f2dbac6 ("keystone: add
support for NAND gpheader image").

These are not reused by other platforms for the build, hence there is no
clear benefit is maintaining them in the generic makefile as a build
target. move these to the keystone specific make option

Original idea of using config.mk by Lokesh Vutla <lokeshvutla@ti.com>

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-08-28 12:33:15 -04:00
Chris Packham
70d39f5714 Makefile: Use correct timezone for U_BOOT_TZ
When building with SOURCE_DATE_EPOCH the timezone is in UTC. When
building normally the timezone is taken from the build machine's locale
setting.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-28 12:33:12 -04:00
Simon Glass
b098032387 x86: ifdtool: Support collating microcode into one place
The Intel Firmware Support Package (FSP) requires that microcode be provided
very early before the device tree can be scanned. We already support adding
a pointer to the microcode data in a place where early init code can access.

However this just points into the device tree and can only point to a single
lot of microcode. For boards which may have different CPU types we must
support multiple microcodes and pass all of them to the FSP in one place.

Enhance ifdtool to scan all the microcode, place it together in the ROM and
update the microcode pointer to point there. This allows us to pass multiple
microcode blocks to the FSP using its existing API.

Enable the flag in the Makefile so that this feature is used by default for
all boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:10 -07:00
Tom Rini
0d339cf9a9 Prepare v2015.10-rc2
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-17 17:32:23 -04:00
Marek Vasut
333b7209ed Makefile: Add target for building bootable SPL image for SoCFPGA
Add build target for generating boot partition images recognised by
the SoCFPGA BootROM. The SoCFPGA BootROM expects four copies of the
u-boot-spl-dtb.sfp at the beginning of boot partition. Those are
u-boot-spl-dtb.bin augmented by a header with which the BootROM can
work. The u-boot-dtb.img uImage is appended to this to produce a
full boot partition image, the u-boot-with-spl-dtb.sfp . This is
the name of the final target.

Signed-off-by: Marek Vasut <marex@denx.de>
2015-08-08 14:14:10 +02:00
Dinh Nguyen
9bbd2132e3 driver/ddr/altera: Add DDR driver for Altera's SDRAM controller
This patch enables the SDRAM controller that is used on Altera's SoCFPGA
family. This patch configures the SDRAM controller based on a configuration
file that is generated from the Quartus tool, sdram_config.h.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-08-08 14:14:05 +02:00
Simon Glass
96a8d409a7 efi: Add 64-bit payload support
Most EFI implementations use 64-bit. Add a way to build U-Boot as a 64-bit
EFI payload. The payload unpacks a (32-bit) U-Boot and starts it. This can
be enabled for x86 boards at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
476476e73b efi: Add support for loading U-Boot through an EFI stub
It is useful to be able to load U-Boot onto a board even if is it already
running EFI. This can allow access to the U-Boot command interface, flexible
booting options and easier development.

The easiest way to do this is to build U-Boot as a binary blob and have an
EFI stub copy it into RAM. Add support for this feature, targeting 32-bit
initially.

Also add a way to detect when U-Boot has been loaded via a stub. This goes
in common.h since it needs to be widely available so that we avoid redoing
initialisation that should be skipped.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Simon Glass
08aeb8b5fe efi: Support building a u-boot-app.efi executable
Add support for building U-Boot as an EFI application with a .efi suffix.
This can be loaded by EFI provided that EFI has the same bit width (32-
or 64-bit) as U-Boot. This unfortunate limitation is imposed by EFI.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:05 -06:00
Simon Glass
e020c88a3c Allow objcopy to work without filling gaps with 0xff
This is currently done for all targets, since 0xff is the default erased
value for most flash devices. In some cases this is not what we want (e.g.
for EFI images) so provide a command to do a vanilla objcopy.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:40 -06:00
Tom Rini
c109dd0079 Prepare v2015.10-rc1
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-03 10:52:14 -04:00
Tom Rini
8968b914be Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2015-07-31 20:16:21 -04:00
Aneesh Bansal
467a40dfe3 powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041
Secure Boot Target is added for NAND for P3041.
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In case of secure boot, this default address maps to Boot ROM.
The Boot ROM code requires that the bootloader(U-boot) must lie
in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF.

In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is
configured as SRAM. U-Boot binary will be located on SRAM configured
at address 0xBFF00000.
In the U-Boot code, TLB entries are created to map the virtual address
0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:50:18 -07:00
Paul Kocialkowski
f3f431a712 Reproducible U-Boot build support, using SOURCE_DATE_EPOCH
In order to achieve reproducible builds in U-Boot, timestamps that are defined
at build-time have to be somewhat eliminated. The SOURCE_DATE_EPOCH environment
variable allows setting a fixed value for those timestamps.

Simply by setting SOURCE_DATE_EPOCH to a fixed value, a number of targets can be
built reproducibly. This is the case for e.g. sunxi devices.

However, some other devices might need some more tweaks, especially regarding
the image generation tools.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-27 15:03:14 -04:00
Masahiro Yamada
4d713be139 kbuild: use relative path more to include Makefile
Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
"--include-dir=$(srctree)" becomes effective when Make enters into
sub Makefiles.

To use relative path in any places, this commit moves the option
above the "sub-make" target.

This was imported from Linux (commit a436bb7b8063) and adjusted for
U-Boot.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-07-27 15:01:55 -04:00
Masahiro Yamada
98bd0e0d9b kbuild: sync with Linux 4.1
Update some build scripts to match Linux 4.1.  Commit-based syncing
was done so as not to break U-Boot specific changes.
The previous big sync was from Linux 3.18-rc1 by commit 176d098277
(kbuild: sync misc scripts with Linux 3.18-rc1).

The commits imported from Linux (some with adjustments) are:

[1] commit 9fb5e5372208973984a23ee6f5f025c05d364633
    Author: Robert Richter <rrichter@cavium.com>
    dts, kbuild: Factor out dtbs install rules to Makefile.dtbinst

[2] commit 371fdc77af44f4cb32475fd499e1d912ccc30890
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: collect shorthands into scripts/Kbuild.include

[3] commit a29b82326ed4eb5567b03c85b52c6891578d5a03
    Author: Michal Marek <mmarek@suse.cz>
    kbuild: Remove duplicate $(cmd) definition in Makefile.clean

[4] commit 1846dfbde3e8a53f3673dcb1c1b79fd9b3f8d40d
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: remove redundant -rR flag of hdr-inst

[5] commit 34948e0bbf98640fc1821751b01d2f0cd17d84d5
    Author: Michal Marek <mmarek@suse.cz>
    kbuild: Drop support for clean-rule

[6] commit a16c5f99a28c9945165c46da27fff8e6f26f8736
    Author: Michal Marek <mmarek@suse.cz>
    kbuild: Fix removal of the debian/ directory

[7] commit d0d38cd9e853db11e0242b3df4c9c3c4a663fbb4
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: use mixed-targets when two or more config targets are given

[8] commit dd33c03b18b3f2db791eb6a17c37d2de66e4de18
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: fix cc-ifversion macro

[9] commit 665d92e38f65d70796aad2b8e49e42e80815d4a4
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion

[10] commit 6dcb4e5edf39e3b65a75ca76f087b2fdbee8a808
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: allow cc-ifversion to have the argument for false condition

[11] commit c0a80c0c27e5e65b180a25e6c4c2f7ef9e386cd3
    Author: Heiko Carstens <heiko.carstens@de.ibm.com>
    ftrace: allow architectures to specify ftrace compile options

[12] commit 0b24becc810dc3be6e3f94103a866f214c282394
    Author: Andrey Ryabinin <a.ryabinin@samsung.com>
    kasan: add kernel address sanitizer infrastructure

[13] commit 4218affdf57f938c04e3a916a9685ee27079f377
    Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
    kbuild: remove warning about "make depend"

[14] commit 77479b38e2f58890eb221a0418357502a5b41cd6
    Author: Nathan Rossi <nathan.rossi@xilinx.com>
    kbuild: Create directory for target DTB

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-27 15:01:54 -04:00
Tom Rini
3c9cc70d71 Merge git://git.denx.de/u-boot-marvell 2015-07-23 09:02:28 -04:00
Stefan Roese
c25012b9af Makefile: Fix mvebu build target to use SPL load and exe-address
The u-boot-spl.kwb build target needs the SPL text-base
(CONFIG_SPL_TEXT_BASE) as load and execution address.

Signed-off-by: Stefan Roese <sr@denx.de>
2015-07-23 10:37:48 +02:00
Simon Glass
fa78e0a371 dm: Reduce SPL device tree size
The SPL device tree size must be minimised to save memory. Only include
properties that are needed by SPL - this is determined by the presence
of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of
unused properties from the nodes that remain.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:21 -06:00
Bin Meng
786a08e0dd x86: Move VGA option rom macros to Kconfig
Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig
and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on
HAVE_VGA_BIOS. The new names are consistent with other x86 binary
blob options like HAVE_FSP/FSP_FILE/FSP_ADDR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Tom Rini
33711bdd4a Prepare v2015.07
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-14 13:32:21 -04:00