Commit graph

13387 commits

Author SHA1 Message Date
Ioana Ciornei
8cbef912ee board: ls2080aqds: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
is activated.  Also, force the PCI devices to be enumerated at probe
time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
791ec1b9e0 board: ls1088aqds: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
is activated.  Also, force the PCI devices to be enumerated at probe
time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
b62526282a arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support
Add support for selecting the appropriate DTS file depending on the
SERDES protocol used. The fsl-ls2088a-qds DTS will be used by default if
there isn't a DTS file specifically made for the current SERDES
protocol.

This patch adds support for the on-board ports (DPMAC 1,2 and 4,5) found
on the SERDES protocols 21(0x15) and 29(0x1d) for SD#1.

On the LS1088AQDS board EMDIO1 is used with two onboard RGMII PHYs
(Realtek RTL8211FD-CG), as well as 2 input/output connectors for
mezzanine cards. Configuration signals from the Qixis FPGA control the
routing of the external MDIOs.

Register 0x54 of the Qixis FPGA controls the routing of the EMDIO1 one
of the 2 IO slots. As a consequence, a new node is added to
describe register 0x54 as a MDIO mux controlled with child nodes
describing all the IO slots as MDIO buses.

Also, in case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled
implement the board_fit_config_name_match() function in order to choose
the appropriate DTS.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:08 +05:30
Ioana Ciornei
f49613f4aa board: lx2160aqds: implement board_fit_config_name_match
In case CONFIG_DM_ETH and CONFIG_MULTI_DTB_FIT are enabled implement the
board_fit_config_name_match() function in order to choose the
appropriate DTS for the current SERDES protocol configuration.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:07 +05:30
Ioana Ciornei
4057bddaa2 board: lx2160aqds: transition to DM_ETH
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
is activated.  Also, force the PCI devices to be enumerated at probe
time.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:07 +05:30
Simon Glass
cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
07e1114671 Fix some checkpatch warnings in calls to udelay()
Fix up some incorrect code style in calls to functions in the linux/time.h
header, mostly udelay().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
1af3c7f422 common: Drop linux/stringify.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
eb41d8a1be common: Drop linux/bug.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
25a5818ff8 common: Drop asm/ptrace.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
3c7dded8e1 Fix some checkpatch warnings in calls to debug()
Fix up some incorrect code style in calls to functions in the log.h
header, mostly debug().

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:57 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
52f2423804 common: Drop bootstage.h from common header
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
0528979fa7 part: Drop disk_partition_t typedef
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
90526e9fba common: Drop net.h from common header
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.

Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:31 -04:00
Simon Glass
c3dc39a2f8 arm: Don't include common.h in header files
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.

Update some header files in arch/arm to drop this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:54:24 -04:00
Simon Glass
b79fdc7697 common: Drop flash.h from common header
Move this uncommon header out of the common header.

Fix up some style problems in flash.h while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Simon Glass
a595a0e910 flash: Tidy up coding style for flash functions
Some functions use the wrong code style and generate checkpatch errors.
Fix these.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 14:53:28 -04:00
Ilias Apalodimas
8a76363712 configs: lx2160a: Add default config for lx2160a using StMM in OP-TEE
Previous patches allow UEFI secure variables to be stored in an RPMB
device using OPTEE. Add a config for the lx2160a hardware so the feature
gets at least compiled.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Remove superfluous differences to lx2160ardb_tfa_defconfig.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Michael Walle
714497e327 efi_loader: round the memory area in efi_add_memory_map()
Virtually all callers of this function do the rounding on their own.
Some do it right, some don't. Instead of doing this in each caller,
do the rounding in efi_add_memory_map(). Change the size parameter
to bytes instead of pages and remove aligning and size calculation in
all callers.

There is no more need to make the original efi_add_memory_map() (which
takes pages as size) available outside the module. Thus rename it to
efi_add_memory_map_pg() and make it static to prevent further misuse
outside the module.

Signed-off-by: Michael Walle <michael@walle.cc>
Add missing comma in sunxi_display.c.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17 21:59:53 +02:00
Trevor Woerner
bb0fb4c0f4 rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
Have this symbol follow the pattern of all other such symbols.
This patch also removes a TODO from the code.

Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15 14:47:35 -04:00
Tom Rini
e2b86e23ce - stm32mp1: migrate MTD and DFU configuration in Kconfig
- stm32mp1: add command stm32prog
 - stm32mp1: several board and arch updates
 - stm32mp1: activate data cache in SPL and before relocation
 - Many improvment for AV96 board and DHCOR SoM
   (add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM
    Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM)
 - clk: stm32mp1: fix CK_MPU calculation
 - DT alignment of stm32mp1 device tree with Linux 5.7-rc2
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAl69FWMACgkQ4rK92eCq
 k3Vy9wgAmFLZ+u2C87A9Cs8i73QX/hs9TsjTJJPxsQWy3bOILgw8ZqBtzqD0qPvc
 Mpqq7UEIZ17OW/lZCi3hqC0nGj7bT3N9rDpUQfu5Voq3GoO80yZqvCQU04AXGGpW
 Aj0fjI5a6JRxQfR7XVoNw7UXPDUrDlchvBDR1GMK4cj4Sw/B+pXNDjkoJ1UWbxG6
 INDgQQKhOCdMzbIsMLiUe4zkT6E8ADI0eJzgti3kWBzrdkwXZg40iEJu/MbMPRKE
 Y22QZ6EkEMFTVYeCPXLU8keo4UbBIKDXWmVDbDeDbNa0QrKZ2IZ0TijajWeMWxZV
 Q9J7JgpSchWcVB14vYNx+HXPUHANTA==
 =bhlu
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-stm32-20200514' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- stm32mp1: migrate MTD and DFU configuration in Kconfig
- stm32mp1: add command stm32prog
- stm32mp1: several board and arch updates
- stm32mp1: activate data cache in SPL and before relocation
- Many improvment for AV96 board and DHCOR SoM
  (add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM
   Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM)
- clk: stm32mp1: fix CK_MPU calculation
- DT alignment of stm32mp1 device tree with Linux 5.7-rc2
2020-05-14 08:44:06 -04:00
Tom Rini
fe16786149 - fix phy configuration for RPi4's bcmgenet
- sync RPi4's env size with other RPi configs
 - add kconfig option to reserver more pages in the EFI mem map
 - add support for SDMA which is used by RPi4
 - fix corner case boot bug for RPi3 32-bit
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl69A9oSHG1icnVnZ2Vy
 QHN1c2UuY29tAAoJEC9tfk32wqh+/vYP/1UaHpYRyjW4AbiKeQHUA/orMx7CxNH2
 wMLl59iIA7Ef5m2lON2RpJxFhEWTeBRD6gRenKZnGp7wESEeDlCmocXRuOSWVBHG
 hjo52f9QXIm1WTlS21aZh6fVuBHNHbn89pBhBRcBI3uaZADkWnM3p3ZB3WCoYAqw
 SRE4T5FtDGBXF0vpyRJq90B6cgK74XifowXlVxsJolI0PYjm3mQunnh1Z3jAPn1i
 IVdFW4453o38N4sx8nsLVJYhYDvFOlxJx66zJN3Ac6fqAPN/6XPaO46+A0a64Rpw
 Bs8a90fLhkUze4Mmk2ZlEBgXvQG5Zlu8cqxxapFNINxO7eEFC6YHAEllRz8lNx1N
 KwfXMwU0HAoDhxQJ7z86iA0rGN7yHkeZps/dCpbqER+7GdZFmr2Rwmdk0L9B6cP1
 LJ5nbtgZcsTdflyBcMTds3rdPEwHXHSZUcGEBuwDnD56V0jOvmmDiIXU+4IRD9lZ
 HhNQqdj6lSJgCqBkdkC+1AQHfEWxvTfJHaQwJ7r8sOP50Uch8IEYTNNgaGoBlhvq
 icBoH1CAakkboBtjLmgmU157JjPRiYfjHXIeZQigtb8gWJ7xJnGbTDGfcdwPrYod
 HMHQ5KXPhFDiAPpfE2By8embM3J/ogWS8SV5l2bxHb5ZDI31aoT66elF2s4gMDS7
 d92/1HzkKEKl
 =66oV
 -----END PGP SIGNATURE-----

Merge tag 'rpi-next-2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

- fix phy configuration for RPi4's bcmgenet
- sync RPi4's env size with other RPi configs
- add kconfig option to reserver more pages in the EFI mem map
- add support for SDMA which is used by RPi4
- fix corner case boot bug for RPi3 32-bit
2020-05-14 08:43:33 -04:00
Marek Vasut
92ca0f7446 ARM: dts: stm32: Synchronize DDR setttings on DH SoMs
Add custom DDR DRAM settings for the DHCOR and DHCOM SoMs and put them
into use by the board file instead of the default ones. These new DRAM
settings are a better fit for the SoMs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrice Chotard
5eff168470 stm32mp1: Fix warning display when 1.5A power supply is used
On DK1/2 board, when a 1.5A power supply is detected, a warning
message is displayed. In this message, "1.5mA" is displayed instead
of "1.5A".

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
5ef642c173 board: stm32mp1: add timeout for I/O compensation ready
This patch avoids infinite loop when I/O compensation failed,
it adds a 1s timeout to detect error.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
3cab9aae45 board: stm32mp1: remove bootdelay configuration for usb or serial boot
It is not allowed to change the user setting of bootdelay, so
remove the check of the boot-source to disable it dynamically
in board_late_init()

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
99f6743d63 board: stm32mp1: set environment variable fdtfile
For booting Linux in the generic distro mechanism and support of
FDTDIR in extlinux.conf , cmd/pxe.c retrieves the FDT file name
from "fdtfile" environment variable.

Dynamically build this variable with compatible of STMicroelectronics
boards.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
055065a8ac board: stm32mp1: gt9147 IRQ before reset on EV1
Software workaround for I2C issue on EV1 board,
configure the IRQ line for touchscreen before LCD reset
to fix the used I2C address.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
0c95295e17 board: stm32mp1: update management of boot-led
Force boot-led ON and no more rely on default-state.
This patch avoid device-tree modification for U-Boot.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrice Chotard
cadd1bfd2d board: stm32mp1: Keep error led ON in case of low power detection
Since commit commit dd2810851e ("stm32mp1: board: support of
error led on ed1/ev1 board") the attended behavior was no more
respected in case of low power source detection on DK2.

The expected behavior is either the error LED keeps blinking for ever,
or blinks 2 or 3 times and must stay ON.

Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
8f035f7b48 stm32mp: stm32prog: adapt the MTD partitions
Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog
command detects in the parsed flash layout files:
- a fsbl partition in NOR.
- a tee partition in NOR/NAND/SPI-NAND

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
954bd1a923 stm32mp: add the command stm32prog
Add a specific command stm32prog for STM32MP soc family
witch allows to program the boot devices with the tool
STM32CubeProgrammer (http://www.st.com/STM32CubeProg).

This command uses the same UART STM32 protocol than MCU
STM32 with or USB with DFU protocol v1.1 (ithe MCU ST
extension are no supported).

The executed actions are based on a tab separated value file
with a stm32 header, the FlashLayout file
(https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout).

This file is parsed by the U-Boot command to:
- initialize the devices
- create the partition table on each device
- initialize the DFU backend to access to not volatile memory
  (NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC)

Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout.

The communication between U-Boot and STM32CubeProgrammer is done with
the specific alternate configuration (see "AN5275: USB DFU/USART protocols
used in STM32MP1 Series bootloaders" for details).

The command stm32prog is executed when a boot from USB is detected
(selected with bootpins) and we can program the boot devices with
a simple command (on Windows or Linux):

PC $>  STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv

1/ the ROM code loads TF-A in embedded RAM (DFU or uart)
2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart)
3/ U-Boot executes the stm32prog command (DFU or uart)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
23229d0309 board: stm32mp1: adapt MTD partition for BOOT from NOR or NAND
Dynamically adapt the MTD partitions in NAND and SPI-NAND when boot from
NOR or NAND/SPI-NAND is detected.

This patch avoids to define the save MTD partition name for NOR and NAND
devices and issue with latest kernel: only the needed MTD partitions
are defined.

For boot from NOR
1/ bootloader (TF-A, U-Boot and OP-TE) in NOR
2/ one large UBI partition in NAND

For boot from NAND
1/ bootloader (TF-A, U-Boot and OP-TE) in MTD raw partition
2/ one large UBI partition

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
b664a74537 board: stm32mp1: support boot from spi-nand
Manage BOOT_FLASH_SPINAND, with boot_device="spi-nand"
and treat this value in bootcmd_stm32mp.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
ccf6e9ff95 configs: stm32mp1: remove optee defconfig
As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig
is identical to stm32mp15_trusted_defconfig and can be removed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
43df0a159d stm32mp1: dynamically detect op-tee presence
Activate OP-TEE driver for trusted and optee defconfig.

This driver allows detection of TEE presence for boot from flash;
CONFIG_STM32MP1_OPTEE is also removed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
28a28ba976 stm32mp1: move MTDPART configuration in Kconfig
This patch reduces the stm32mp1 environment size and builds
dynamically the MTD partitions with information from defconfig
(CONFIG_MTDPARTS_...).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
31325e1b8b stm32mp1: dynamically build DFU_ALT_INFO
This patch reduces the stm32mp1 environment size and
builds dynamically the DFU board configuration with gpt
and mtd partitions and information from defconfig
(CONFIG_DFU_ALT_RAM0).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
ec2933e543 board: stm32mp1: move set_dfu_alt_info in st common directory
Move the stm32mp1 common code set_dfu_alt_info() in common directory,
this patch reduce the maintenance effort on this generic part (not board
dependent).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Patrick Delaunay
939ba160aa board: stm32mp1: move board_get_mtdparts in st common directory
Move the stm32mp1 common code board_get_mtdparts() in common directory,
this patch reduce the maintenance effort on this generic part (not board
dependent).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
2d68365da1 ARM: stm32: Implement DDR3 coding on DHCOR SoM
The DHCOR board does exist in multiple variants with different DDR3
DRAM sizes. To cater for all of them, implement DDR3 code handling.
There are two GPIOs which code the DRAM size populated on the SoM,
read them out and use the value to pick the correct DDR3 config.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Marek Vasut
731fd50e27 ARM: stm32: Implement board coding on AV96
The AV96 board does exist in multiple variants. To cater for all of
them, implement board code handling. There are two GPIOs which code
the type of the board, read them out and use the value to pick the
correct device tree from an fitImage.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-05-14 09:02:12 +02:00
Marek Vasut
ec1ee5a927 ARM: stm32: Add default config for DHCOR
Add default U-Boot configuration for the DHCOR SoM on AV96 board.

Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00
Eugeniy Paltsev
a8eb9b2672 ARC: HSDK: anounce state of BIM switch
Anounce state of BIM switch which defines if U-boot is loaded
and started by preloader or not.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-05-13 18:16:37 +03:00
Kyle Evans
82aef6c6f8 rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES
Some systems may use a slightly larger stub to do PSCI for booting the RPi
family.  The number of pages has been made configurable so that operating
systems building U-Boot for use in these kinds of environments can reserve
more memory in the EFI memory map.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13 14:04:50 +02:00
Kyle Evans
c6badda85c rpi: Kconfig option for initial page reservation
While the nearly-universal default for the Raspberry Pi family is to use
spin tables and the spin table implementation provided by the Raspberry Pi
Foundation, FreeBSD and others may use a PSCI implementation instead.

Accommodate these setups by allowing them to configure for more than one
page to be reserved in the initial reservation.  The default reservation
remains as one page.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-13 14:04:49 +02:00
Tom Rini
bb488ac34d Merge tag 'ti-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Fix boot issues on Nokia RX-51
- Configure AM6 CPSW for 10Mbps in rgmii mode.
- Minor changes for J721e
2020-05-11 12:04:54 -04:00
Pali Rohár
b5f7cf5017 Nokia RX-51: Remember setup_console_atag option
When variable setup_console_atag is unset then read default value from OMAP
atags which passed NOLO bootloader to U-Boot.

This would allow to boot Maemo Linux kernel from U-Boot with serial console
settings configured in NOLO bootloader (which loads U-Boot).

So serial console needs to be enabled only at one place, globally in NOLO.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11 10:16:49 +05:30
Pali Rohár
f5cfdbf9c9 Nokia RX-51: Remove PART* macros
Now when code for defining partitions is duplicated at two locations
(option CONFIG_MTDPARTS_DEFAULT in nokia_rx51_defconfig file and macro
OMAP_TAG_PARTITION_CONFIG in rx51.c file) there is no need to have common
macros. Lets inline PART* macros to rx51.c file.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11 10:16:49 +05:30
Pali Rohár
778907d213 Nokia RX-51: Move comment about CONFIG_SYS_TEXT_BASE to correct place
In commit commit 278b90ce78 ("configs: Migrate CONFIG_SYS_TEXT_BASE") was
moved definition for CONFIG_SYS_TEXT_BASE option but author probably forgot
to move also comment for lines which are moving. So do it now!

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11 10:16:49 +05:30
Pali Rohár
7d0e773bb1 Nokia RX-51: Add README.nokia_rx51 file to MAINTAINERS
This entry was missing in MAINTAINERS file.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11 10:16:49 +05:30
Pali Rohár
5308665315 Nokia RX-51: Update my email address
I'm using a new email address, so reflect this state also in U-Boot.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-05-11 10:16:49 +05:30
Peng Fan
a6c36f15eb imx: imx8qxp: update fdt_file according to m4 state
Update fdt_file according to m4 parts state

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
e825d3089a imx: imx8qm: update fdt_file according to m4 state
Update fdt_file according to m4 parts state

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
ed5b253d0e imx: imx8qm/qxp: check whether m4 partition booted
Add code to check m4 partition booted or not, we will use this
to runtime set device tree file that passed to Linux Kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
231401de2e imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot
Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Adam Ford
f36f8bc627 imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.
Beacon EmbeddedWorks, formerly known as Logic PD, is releasing
a devkit based on the i.MX8M Mini SoC consisting of baseboard +
SOM.

It supports eMMC on the SOM, microSD on the baseboard, various
GPIO, the PINCTRL, and UART.

Signed-off-by: Adam Ford <aford173@gmail.com>
2020-05-10 20:55:20 +02:00
Marek Vasut
b52fb0b0b5 ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ
Add initial support for Technexion Pico-iMX8MQ SoM on PicoPI carrier
board. Currently working is ethernet, serial, eMMC. DT is imported
from Linux 5.4.28 ("462afcd6e7ea") .

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-05-10 13:19:39 +02:00
Ashok Reddy Soma
702de89cc6 treewide: mem: Move mtest related defines to Kconfig
Move below defines which are used by mtest utility to Kconfig.
CONFIG_SYS_MEMTEST_START
CONFIG_SYS_MEMTEST_END

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Fix kmcoge5ne board, re-run migration as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-08 12:02:56 -04:00
Andre Przywara
be0d09695d arm: juno: Use PSCI based reset
So far the Juno board wasn't implementing reset. Let's just use the
already existing PSCI_RESET based method to avoid any extra code.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Andre Przywara
b3270e9138 arm: juno: Enable OF_CONTROL
The Arm Juno board was still somewhat stuck in "hardcoded land", even
though there are stable DTs around, and one happens to actually be on
the memory mapped NOR flash.

Enable the configuration options to let the board use OF_CONTROL, and
add a routine to find the address of the DTB partition in NOR
flash, to use that for U-Boot's own purposes.
This can also passed on via $fdtcontroladdr to any kernel or EFI
application, removing the need to actually load a device tree.

Since the existing "afs" command and its flash routines require
flash_init() to be called before being usable, and this is done much
later in the boot process, we introduce a stripped-down partition finder
routine in vexpress64.c, to scan the NOR flash partitions for the
DT partition. This location is then used for U-Boot to find and probe
devices.

The name of the partition can be configured, if needed, but defaults
to "board.dtb", which is used by Linaro's firmware image provided.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-07 09:01:42 -04:00
Josef Lusticky
ef5a7438ac board: atmel: Fix compiler warning 'board_usb_hw_init()' not used
Wrap definition of board_usb_hw_init() around with #ifdef CONFIG_CMD_USB
to avoid warning: 'board_usb_hw_init' defined but not used
[-Wunused-function] when compiling without CONFIG_CMD_USB.

This patch makes sama5d27_som1_ek, sama5d2_ptc_ek and sama5d2_xplained
consistent with other boards that use the same #ifdef to avoid the warning.

Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Josef Lusticky <josef@lusticky.cz>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
2020-05-06 16:18:53 +03:00
Tom Rini
191ee8aac6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx
- Add DM model for P1010RDB
- Add I2C DM Model support for P1010RDB, T1042RDB, T2080, T4240RDB,
  MPC8548CDS, T1024RDB, P4080, P3041DS, P2041RDB, P2020RDB, P1020RDB,
  P5040DS
- Fix reference to READM.qe_firmware
2020-05-05 09:08:53 -04:00
Tom Rini
425fefa9a3 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Support 64-bit U-Boot as the payload for coreboot x86
2020-05-04 11:06:14 -04:00
Tom Rini
143414c03f i.MX for 2020.07
----------------
 
 - imxrt: fix LCD clock, fix doc
 - new board: Coral Dev
 - imx8: enable Cache in SPL. SNVS, update SCFW API
 - imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
 - MX6ULL : is_imx6ull to include i.MX6ULZ
 - Net: add config to enable TXC delay
 
 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCXq07zQ8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76azngCdG7iFIXq3kg47qliAr44jIa4s/DUAnRzmSTut
 FuQlRhgXrY+Gh94FzrxN
 =MoOz
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200502' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

i.MX for 2020.07
----------------

- imxrt: fix LCD clock, fix doc
- new board: Coral Dev
- imx8: enable Cache in SPL. SNVS, update SCFW API
- imx8MM: fix reset, 8MQ quand and QuadLite, CPU speed grading
- MX6ULL : is_imx6ull to include i.MX6ULZ
- Net: add config to enable TXC delay

Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/682033914
2020-05-04 09:29:42 -04:00
Tom Rini
04da42770b Merge tag 'u-boot-rockchip-20200501' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- dts clean up to use -u-boot for px30, rk3399 boards
- dts sycn from upstream kernel for rk3328, rk3399
- add rockchip rng driver
- new board support: rk3328-roc-cc, rk3399-roc-pc,Nanopi M4 2GB
2020-05-04 07:28:14 -04:00
Simon Glass
538437ed39 x86: Add a 64-bit 'coreboot64' build
Coreboot is a first-stage bootloader mostly used on x86 devices as an
alternative to UEFI. Coreboot runs in 32-bit mode.

U-Boot currently supports booting from coreboot as a second-stage
bootloader, also in 32-bit mode. However it is useful to be able to run
U-Boot in 64-bit mode. To do this we can have a 32-bit SPL which switches
over the CPU and jumps to a 64-bit U-Boot proper.

Add a new 'coreboot64' board for running 64-bit U-Boot from coreboot. This
uses binman to create an image with a 32-bit SPL and a 64-bit U-Boot.

This allows running 64-bit EFI images on x86, for example, without needing
a native U-Boot port for a board.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-04 15:28:28 +08:00
Hou Zhiqiang
177edd82b2 powerpc: P1010RDB: Compile legacy PCIe routines conditionally
Compile the legacy PCIe initialization reoutines for P1010RDB
boards only when DM_PCI is not enabled.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:37 +05:30
Biwen Li
d2e3f7c608 dm: powerpc: T1040/T1042: add i2c DM support
This supports i2c DM for SoC T1040/T1042

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
8e4be6dfb7 dm: powerpc: T2080/T2081: add i2c DM support
This supports i2c DM for SoC T2080/T2081

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
e6bd72f880 dm: ppc: T4240: add i2c DM support
This supports i2c DM for SoC T4240

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
01d97d5f18 dm: ppc: MPC8548CDS: add i2c DM support
This supports i2c DM for board MPC8548CDS

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
2703e640d2 dm: ppc: p1010: add i2c DM support
This supports i2c DM for SoC P1010

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
9e9771a610 dm: powerpc: T1023/T1024: add i2c DM support
This supports i2c DM for SoC T1023/T1024

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Biwen Li
74014dfcd8 dm: powerpc: P1020: add i2c DM support
This supports i2c DM for SoC P1020

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-04 09:12:36 +05:30
Giulio Benetti
2bdfde5a00 imxrt1020-evk: README: change dd command destination
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive
damage.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01 19:03:10 +02:00
Giulio Benetti
e1747cefbd imxrt1050-evk: README: change dd command destination
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive
damage.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-05-01 19:03:02 +02:00
Alifer Moraes
ef99f3d9e8 arm: imx: Add support for Google's Coral Dev Board
Add initial support for Google's Coral Dev Board based on i.MX8MQ.

https://coral.ai/products/dev-board

The Phanbell naming has been used here to match the naming convention
used in Google's U-Boot source tree:

https://coral.googlesource.com/uboot-imx/

Co-developed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
Tested-by: Marco Franchi <marcofrk@gmail.com>
2020-05-01 13:49:15 +02:00
Philippe Schenker
f72e48ba4d board: apalis_imx6: Add KSZ9131 phy skew settings
This patch adds skew register settings for KSZ9131. It checks first
which phy is on the board and then applies the correct skew settings.

Skew settings calculation for the KSZ9131:
The i.MX6 SoC has an output skew tolerance of -100ps to 900ps. All
PCB traces where routed exactly the same length so we can calculate
the skew settings without taking the length into consideration. The
traces are all length matched.

RXC skew (PHY to MAC):
- We use the 2ns DLL controlled delay on the PHY
- We do not use the skew registers

This results in the following values:

		RXC
PHY fixed Delay	2000ps
PHY Added Delay	0ps
T_setup_R min	2.00ns
T_setup_R typ	2.00ns
T_setup_R max	2.00ns
T_hold_R min	1.60ns
T_hold_R typ	2.00ns
T_hold_R max	2.40ns

That means we are well within RGMII specs.

TXC skew (MAC to PHY):
- We use the 2ns DLL controlled delay on the PHY
- We then subtract ~0.6ns with TXD[0:3] and TXC clock pad skew
  register in a resulting ~1.4ns delay.

This results in the following values under consideration of the
tolerances:

		TXC min	TXC typ	TXC max
MAC min		-100ps	-100ps	-100ps
MAC max		900ps	900ps	900ps
PHY fixed Delay	2000ps	2000ps	2000ps
PHY added Delay	-340ps	-600ps	-859ps
T_setup_T min	1.56ns	1.30ns	1.04ns
T_setup_T typ	2.06ns	1.80ns	1.54ns
T_setup_T max	2.56ns	2.30ns	2.04ns
T_hold_T min	1.04ns	1.30ns	1.56ns
T_hold_T typ	1.94ns	2.20ns	2.46ns
T_hold_T max	2.84ns	3.10ns	3.36ns

This shows that T_hold_T min and T_setup_T min times are out of spec
for RGMII timing. However the KSZ9131 has a minimal value for this time
of 0.8ns which is met under all circumstances.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-05-01 13:46:22 +02:00
Philippe Schenker
c4b650befc board: verdin-imx8mm: Add KSZ9131 phy skew settings
This patch determines which phy is placed on the board with the PHY ID
then it sets the same settings for KSZ9031 as before but for KSZ9131
it enables both RXC and TXC delay lines in the PHY.
This will compensate the missing delay from the MAC. Other skew
settings are not needed as the traces on board are routed exactly the
same length

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01 13:46:22 +02:00
Philippe Schenker
22b56f428d verdin-imx8mm: Change board phy skew values for our ksz9031
This patches uses the existing functions for interacting with the
KSZ9031 and uses the values appropriate for our board.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Tested-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-05-01 13:46:22 +02:00
Fabio Estevam
63fc9d79e5 mx8mq_evk: Remove unrelated comment
The comment does not relate to the setup_i2c() function, so just
remove it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:22 +02:00
Fabio Estevam
d3855c802e imx8mp_evk: Remove unrelated comment
The comment does not relate to the setup_i2c() function, so just
remove it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-05-01 13:46:22 +02:00
Claudius Heine
b9bb1d06e2 imx: imx8m*: Remove do_reset from board files
Use the `do_reset` implementation of `arch/arm/lib/reset.c` in SPL
instead.  It is very close to what is done here, anyway, and plays
more nicely with the rest of U-Boot than adding a custom `do_reset`
implementation into board files.

`do_reset` from `arch/arm/lib/reset.c` calls `reset_cpu` with 0 as the
addr parameter while the boards are passing WDOG1_BASE_ADDR.  This is
ok because the `reset_cpu` implementation uses WDOG1_BASE_ADDR by
default if 0 is passed in.

Co-Authored-by: Harald Seiler <hws@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2020-05-01 13:46:22 +02:00
Franck LENORMAND
242d1cd69b imx8: Configure SNVS
Add a module to configure the tamper and secure violation of
the SNVS using the SCU API.

The module also adds some commands:
 - snvs_cfg: Configure the SNVS HP and LP registers
 - snvs_dgo_cfg: Configure the SNVS DGO bloc if present (8QXP)
 - tamper_pin_cfg: Change the configuration of the tamper pins
 - snvs_clear_status: Allow to write to LPSR and LPTDSR to clear
   status bits

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-01 13:46:22 +02:00
Deepak Das
d597e61374 rockchip: rk3399: Add Nanopi M4 2GB board support
commit b2f5da9dd0 ("rockchip: rk3399: Add Nanopi M4 board support") added
support for Nanopi M4 board with Dual-Channel 4GB LPDDR3-1866 RAM.
This patch adds another variant of NanoPi M4 board with Dual-Channel
2GB DDR3-1866 RAM.

Signed-off-by: Deepak Das <deepakdas.linux@gmail.com>
2020-05-01 18:32:56 +08:00
Suniel Mahesh
f417d71ea7 rk3399: Add ROC-RK3399-PC Mezzanine board
Add Firefly ROC-RK3399-PC Mezzanine board which is an
extension board on top of roc-rk3399-pc.

Will drop the separate defconfig file, once we support
the board detection at runtime.

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Chen-Yu Tsai
bab972948e rockchip: rk3328: Add support for ROC-RK3328-CC board
The ROC-RK3328-CC from Firefly and Libre Computer Project is a credit
card size development board based on the Rockchip RK3328 SoC, with:

  - 1/2/4 GB DDR4 DRAM
  - eMMC connector for optional module
  - micro SD card slot
  - 1 x USB 3.0 host port
  - 2 x USB 2.0 host port
  - 1 x USB 2.0 OTG port
  - HDMI video output
  - TRRS connector with audio and composite video output
  - gigabit Ethernet
  - consumer IR receiver
  - debug UART pins

The ROC-RK3328-CC has the enable pin of the SD card power switch tied
to GPIO_0_D6. This pin also has the function SDMMC0_PWREN, which is
muxed by default. SDMMC0_PWREN is an active high signal controlled by
the MMC controller, however the switch enable is active low, and
pulled low (enabled) by default to make things work on boot.

As such, we need to mux away from SDMMC0_PWREN and use GPIO to enable
power to the card. The default GPIO state for the pin is pull-down and
input, which doesn't require extra configuration when paired with the
external pull-down and active low switch.

Deal with this by enabling regulator support in SPL, and setting
"u-boot,dm-spl" for the regulator and other device nodes needed for
muxing the pin.

The device tree file is synced from the Linux kernel next-20200324.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-01 18:32:56 +08:00
Tom Rini
b641dd3ec8 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- distro boot support for SPI flash
- sifive spi flash driver
2020-04-30 18:05:15 -04:00
Jagan Teki
286bcdb40f sifive: fu540: Enable spi-nor flash support
HiFive Unleashed A00 support is25wp256 spi-nor flash,
So enable the same and add test result log for future
reference.

Tested on SiFive FU540 board.

Thanks to Sagar for various use cases and tests.

[QUAD mode in dt with spi-tx-bus-width: <4>]
 pp opcode      = 0x34 [QUAD MODE]
 read opcode  = 0x6c  [QUAD MODE]
 erase opcode = 0x21

SPI-NOR:
1. erase entire flash: Pass
2. write entire flash: Pass
3. read entire flash: Pass
4. cmp 32MiB read back data: Pass
5. MMC: Booted Linux and dtb from mmc

[SPI MODE in dt with spi-tx-bus-width: <1>]
pp opcode     = 0x12 [SPI MODE]
read opcode  = 0xc   [SPI MODE]
erase opcode = 0x21

SPI-NOR:
1. erase entire flash: Pass
2. write entire flash: Pass
3. read entire flash: Pass
4. cmp 32MiB read back data: Pass
5. MMC: Booted Linux and dtb from mmc

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-30 22:34:20 +05:30
Tom Rini
6d7dacf726 Xilinx changes for v2020.07-rc2
mmc:
 - Fix dt property handling via generic function
 
 clk:
 - Fix versal watchdog clock setting
 
 nand:
 - Fix zynq nand command comparison
 
 xilinx:
 - Enable ubifs
 - Sync board_late_init configurations with initrd_high setup
 - Make custom distro boot more verbose
 
 zynq:
 - Kconfig alignments
 - Fix nand cse configuration
 
 zynqmp:
 - Fix zcu104 low level qspi configuration
 - Small DT updates
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXqp9yAAKCRDKSWXLKUoM
 IXiuAKCLjBKGQ+o+BkJMvjbydF1JgFdXpwCffFPRe6dTkPsLZhpzW/YQMrjidtg=
 =CQTb
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2020.07-rc2

mmc:
- Fix dt property handling via generic function

clk:
- Fix versal watchdog clock setting

nand:
- Fix zynq nand command comparison

xilinx:
- Enable ubifs
- Sync board_late_init configurations with initrd_high setup
- Make custom distro boot more verbose

zynq:
- Kconfig alignments
- Fix nand cse configuration

zynqmp:
- Fix zcu104 low level qspi configuration
- Small DT updates

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30 11:34:01 -04:00
Tom Rini
b9da77f195 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb,
  ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb.
- Add GICv3 support for ls1028a, ls2088a, ls1088a.
- Add lpuart support on ls1028aqds.
- Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based
  platforms.
2020-04-30 10:06:54 -04:00
Tom Rini
6864fc8704 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sh
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29 10:39:18 -04:00
Madalin Bucur
6eb32a03e0 driver: net: fm: add DM ETH support
Probe the FMan MACs based on the device tree while
retaining the legacy code/functionality.
One notable change introduced here is that, for DM_ETH,
the name of the interfaces is corrected to the fmX-macY
format, that avoids the referral to the MAC block names
which were incorrect for FMan v3 devices (i.e. DTSEC,
TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1).
The legacy code is left unchanged in this respect.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29 11:10:54 +05:30