Commit graph

254 commits

Author SHA1 Message Date
Mark Kettenis
0ae3c79b7c doc: board: apple: Update Apple M1 documentation
U-Boot now supports NVMe storage and on the laptop models, the
SPI keyboard.  Since we now disable the debug console by default
provide instructions on how the enable the debug console including
a table listing the appropriate UART base address for each of the
supported SoCs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-21 08:35:40 -05:00
Anup Patel
7c08680aa3 doc: qemu-riscv: Update documentation for QEMU spike machine
We can now use same U-Boot images on both QEMU virt machine and QEMU
spike machine so let's update the QEMU RISC-V documentation.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-02-10 11:19:15 +08:00
Marcel Ziswiler
2bc2f817ce board: toradex: add verdin imx8m plus support
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB
IT V1.0B module. They are strapped to boot from eFuses which are factory
fused to properly boot from their on-module eMMC. U-Boot supports
booting from the on-module eMMC only, SDP support is disabled for now
due to missing i.MX 8M Plus USB support.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Ethernet both on-module eQoS and FEC (requires PHY on carrier board)
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into a FIT image,
loaded by SPL.

Boot:
U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
Quad die, dual rank failed, attempting dual die, single rank configuration.
Normal Boot
WDT:   Started watchdog@30280000 with servicing (60s timeout)
Trying to boot from BOOTROM
Find img info 0x&48025a00, size 872
Need continue download 1024
Download 779264, Total size 780424
NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
NOTICE:  BL31: Built : 16:52:37, Aug 26 2021

U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)

CPU:   Freescale i.MX8MP[8] rev1.1 at 1200 MHz
Reset cause: POR
DRAM:  8 GiB
Core:  78 devices, 18 uclasses, devicetree: separate
WDT:   Started watchdog@30280000 with servicing (60s timeout)
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
Setting variant to wifi
Net:   Hard-coding pdata->enetaddr
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot:  0
Verdin iMX8MP #

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-07 16:33:22 +01:00
Heiko Thiery
16c7369ede board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05 15:49:02 +01:00
Andrey Zhizhikin
94588ff395 imx8mn-ddr4-evk: generate single bootable image
As suggested in commit 028abfd9b1 ("imx8mm-evk: Generate a single
bootable flash.bin again") for imx8mm_evk, it is possible to produce
single bootable image via binman. This restores the original behavior in
distros, where only one boot container is used to create target image.

Perform similar adaptions in order to provide single bootable image for
imx8mn-ddr4-evk derivate.

Update documentation to drop additional step of copying u-boot.itb

Fixes: 353dfe4b43 ("imx8mn-ddr4-evk: switch to use binman")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 15:49:01 +01:00
Fabio Estevam
23b1d8e24a doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-02-05 15:49:01 +01:00
Fabio Estevam
59c3b712ad doc: sl-mx8mm: Remove ATF_LOAD_ADDR export
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-02-05 15:49:01 +01:00
Fabio Estevam
9482a60de9 doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.

Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-02-05 15:49:01 +01:00
Ariel D'Alessandro
c4c1ed68c1 imx8mn_var_som: Add support for Variscite VAR-SOM-MX8M-NANO board
Add support for iMX8MN VAR-SOM-MX8M-NANO board. Enables support for:

- 1GiB DDR4 RAM
- 16 GiB eMMC
- SD card
- Gigabit ethernet
- USBOTG1 peripheral - fastboot

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05 13:38:39 +01:00
Heinrich Schuchardt
ab37facd46 doc: describe MSEL settings for booting from SD card
unmatched.rst describes booting from SD card or from SPI. But only for
booting from SPI the boot selection settings are described.

Add the missing information.

Fix a typo 'uSD'.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-01-29 10:23:40 +01:00
Pali Rohár
92a0940796 Nokia RX-51: Convert documentation to rst format
Convert documentation to rst format

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-29 10:23:40 +01:00
Tom Rini
93ee2bbe14 doc: samsung: axy17lte: Fix underlines
A few sections had underlines that were too short, correct.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-19 11:06:07 -05:00
Tom Rini
b24b201b60 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung
- Updates for a{3,7}y17lte platforms
2022-01-19 08:09:34 -05:00
Andre Przywara
46620d21a6 doc: add Arm Juno board documentation
The Juno Arm development board is an open, vendor-neutral, Armv8-A
development platform.
Add documentation that briefly outlines the hardware, and describes
building and installation of U-Boot.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-15 10:57:21 +01:00
Henrik Grimler
e93158beb3 doc: board: avoid ambiguous names for axy17lte
Model names are SM-A{3,5,7}20, just SM-{3,5,7}20 could also refer to
SM-J{3,5,7}20 or SM-T{3,5,7}20.

Fixes: 3e2095e960 ("board: samsung: add support for Galaxy A series
of 2017 (a5y17lte)")
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2022-01-13 14:33:00 +09:00
Tom Rini
fe04d885fb Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-10 14:01:57 -05:00
Patrick Wildt
b05cebb5f2 imx8mq: Generate a single bootable flash.bin again
All i.MX8MQ boards have been converted to binman, which makes it
necessary to flash both flash.bin and u-boot.itb to get a bootable
system. Prior to the conversion, only flash.bin was needed.

Such new requirement breaks existing distro mechanisms to generate the
final binary because the extra u-boot.itb is now required.

Generate a final flash.bin that can be used again as a single bootable
binary to keep the original behavior.

After this change the SPL binary is called spl.bin, which is a more
descriptive name for its purpose, and can still be used standalone (for
example, for secure boot purposes).

Also update imx8mq_evk.rst to remove the u-boot.itb copy step.

This is a cherry-pick of 028abfd9b1 ("imx8mm-evk: Generate a single
bootable flash.bin again") adjusted to apply to i.MX8MQ.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-01-08 11:16:03 -05:00
Peng Fan
70e59a0d17 doc: imx8mq_evk: update doc after using binman
Update doc after using binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-01-07 15:42:41 -05:00
Peter Hoyes
6c2f16b3c9 doc: Add documentation for the Arm VExpress64 board configs
Create a new documentation section for Arm Ltd boards with a sub-page
for the VExpress64 boards (FVP-A and Juno).

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00
Andre Przywara
eaaa5fbbe4 sunxi: add board documentation
Add some long overdue instructions for building and installing U-Boot on
Allwinner SoC based boards.
This describes the building process, including TF-A and crust, plus
installation to SD card, eMMC and SPI flash, both from Linux and U-Boot
itself. Also describe FEL booting.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-31 06:44:51 +01:00
Simon Glass
c3c1614537 arm: riscv: qemu: Explain how to extract the generated dt
QEMU currently generates a devicetree for use with U-Boot. Explain how to
obtain it.

Also explain how to merge it to produce a devicetree with the U-Boot
features included.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23 10:24:39 -05:00
Simon Glass
6d7636c946 arm: qemu: Mention -nographic in the docs
Without this option QEMU appears to hang. Add it to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-23 10:24:39 -05:00
Tom Rini
4afab30cae Prepare v2022.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmHArDwACgkQFHw5/5Y0
 tyzxyAv/SjZjoEwG8nu7ptVZqTsZfm+tVwwWmQEBAA40MXy/KSccDtbUwB5GCO6f
 Uvk+qFFDbCkbGZh5VKbQusMmUoB02Xu9zUoSxKxcXL4WfC6Bg5GV/UWN9s8G3Tm6
 4wcP0l8WFcQjjr89UfXugiZH58psvFu6PBbWVY4rMH9gZ5ds0AkNOF0L+HbdVmMR
 a5HBfrcySRY2kiTQuKF+RVlMW6BtaOqJp/XIyy8w6bH09ykMomj/u7z3JP3y9ZzL
 w3FXqCLlIEnvdDcqfWvfjoJ/gm0WcLulgSVpTFGS0jgJpnbeAURtZcuVgj6aPRUW
 FRon+u0tj3wpFjibs2cpyXWd+gw/bLLFpDXx78AUAPjxG31tEKbnR1j8R8wBZJ0B
 TqWZ3pCne/LPOT90y2KW2z6ty2n/yEn6qEFFT9MN9R4L0N+U0er//sYJC/nn/e6u
 fjvQ9OPLbnAfHVrad3ZeIkePrLOIF6XYwNQpsjt9aE2kU9IvV5sTa8TxZuQgasBU
 A46FgXtC
 =MEG2
 -----END PGP SIGNATURE-----

Merge tag 'v2022.01-rc4' into next

Prepare v2022.01-rc4
2021-12-20 17:12:04 -05:00
Andre Przywara
35f3ef93d6 doc: board: Add Calxeda Highbank/Midway documentation
The Calxeda servers are using U-Boot as the primary bootloader, which
was shipped as part of a firmware upgrade package.
Even though the machines are considered legacy at this point, the port
still works, so deserves some documentation.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-18 12:05:19 +01:00
Thomas Skibo
6a863894ad riscv: Support booting SiFive Unmatched from SPI.
Configure SPI flash devices into SPL.  Add SPI boot option to spl.c.
Document how to format flash for booting.

Signed-off-by: Thomas Skibo <thomas-git@skibo.net>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02 16:43:56 +08:00
Padmarao Begari
ffb78a7c71 doc: board: Update Microchip MPFS Icicle Kit doc
UART1 use for U-Boot and Linux console instead of UART0 and
UART0 is reserved for Hart Software Services(HSS).

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-12-02 16:43:52 +08:00
Patrick Delaunay
c7c06fa776 board: stm32mp1: add support of nor1 device in dfu command
Add support of mtd backend for nor1 when this device is present on the
board, on STM32MP157C-EV1 for example, as the support of several MTD
spi-nor instance are now supported with commit b7f060565e ("mtd:
spi-nor: allow registering multiple MTDs when DM is enabled").

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-30 16:43:28 +01:00
Heinrich Schuchardt
9d2465347c doc: qemu-arm peripherials
* add description how to add RNG device
* for a disk specify format=raw to avoid a warning
* fix a typo

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-30 09:23:27 +01:00
Ivan Mikhaylov
2f7c7aeb5c board: iot2050: update build documentation for OP-TEE
Set ta-target explicitly to correspond with OP-TEE recipe in
siemens/meta-iot2050.

Errors without explicit set of ta-target:
aarch64-linux-gnu-gcc: error: unrecognized command-line option ‘-mthumb’
aarch64-linux-gnu-gcc: error: unrecognized command-line option ‘-mno-unaligned-access’
aarch64-linux-gnu-gcc: error: unrecognized command-line option ‘-mfloat-abi=hard’
make: *** [mk/compile.mk:159: out/arm-plat-k3/ta_arm32-lib/libdl/dlfcn.o] Error 1

Signed-off-by: Ivan Mikhaylov <ivan.mikhaylov@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-11-29 11:15:37 -05:00
Tom Rini
b8a156f54e Pull request for efi-2022-01-rc2-2
UEFI:
 * fix measurement of BootOrder variable for TCG2 protocol
 
 TPM:
 * TIS mmio driver. This driver supports QEMU's emulated TPM.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmGQD7kACgkQxIHbvCwF
 GsStWA/9HmYlBuc0ZNNVVvBtD9QKe1rliXnGubVA52ZhnZHlIijdbpXSZBbA2uQy
 auMox1eQ7isdQFgC8GGZF5O3VpwdT5E/mz1BYukkvHUFdYmwOSKfH++7Tt88P+Uc
 ZK/uIfhZApl9UiuzzLr6M/8T7K/NWg7BtsdNivSe6sBHPIBfAfl0K1CGxU9v1lm1
 0DvPDaby5J3SbZUiln6mzxZ9Yjmqz85s3W7IUvY7I7xWgApaP6IuvQa4pkrGzDeQ
 ofICVozr75yCk1kW+xB5lSQ/iI//ppOL4Ng7aL87eSoAzp1W+5TZrWA6pIYGfWVD
 bgmMI3OileCFrU3uNGKY7dbObP7FZz7lVykXoejMfHNG/Zfmo+f+2qS9PgT83Rnr
 KC4eMqS+0wYiO2Qru+ZJwija9JsS5SO9v7Vp2L0vT2u+CU35dDuy5epi1IHzfSL0
 bO1feAtUYwK/An2jwlSG7EO4AxJ7Yh+WlxL5TgsSqJGdyL/uI3pussuXRnHHshrS
 2xmV9M8dSFy2RQTNO958nloj01XNzPRmcBl5uVF5htye0PI5VFk7Lo8oUj6UzuXt
 14gNl1pumnihkEl4C+/TR7HL9/Q/tgm4EEYIU7+kbEyS0MFEzsjOt0y+Sm12qD7S
 wQ1jnLcstp88e7erMyursv/HUlD8Kn5HWckpGT+wnBKsN4xMSQk=
 =VSW9
 -----END PGP SIGNATURE-----

Merge tag 'efi-2022-01-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2022-01-rc2-2

UEFI:
* fix measurement of BootOrder variable for TCG2 protocol

TPM:
* TIS mmio driver. This driver supports QEMU's emulated TPM.
2021-11-13 18:13:35 -05:00
Ilias Apalodimas
be2868f097 doc: qemu: Add instructions for swtpm usage
A previous patch added support for an mmio based TPM.
Add an example in QEMU on it's usage

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-10 20:57:54 +01:00
Michael Walle
cbdc4c974f board: sl28: add update image documentation
Document the update image and how to use the EFI UpdateCapsule.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 14:50:21 +05:30
Frieder Schrempf
f06add11f0 doc: board: kontron: sl28: Reduce section levels and change title
In order to add other Kontron boards to the docs alongside the existing sl28 board,
we need to reduce the levels of the sections and change the title.

Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09 14:50:21 +05:30
Dzmitry Sankouski
3e2095e960 board: samsung: add support for Galaxy A series of 2017 (a5y17lte)
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones.
U-boot can be used as chain-loaded bootloader to gain control
on booting vanilla linux(and possibly others) kernels

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31 11:25:39 -04:00
Dzmitry Sankouski
80565ec6f0 board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) board
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone,
for China \ Hong Kong markets.
Has unlockable bootloader, unlike SM-G960U (American market version),
which allows running u-boot as a chain-loaded bootloader.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2021-10-31 11:25:38 -04:00
Mark Kettenis
91ce6bf20b doc: board: apple: Add Apple M1 documentation
Provide preliminary instructions on how to get U-Boot to run on
Apple Silicon Macs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31 08:46:44 -04:00
Stefano Babic
5fac11e6d5 Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
2021-10-21 13:58:13 +02:00
Tom Rini
79b8849d4c u-boot-imx-20211020
-------------------
 
 First PR from u-boot-imx for 2022.01
 
 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535
 
 - new board: kontron-sl-mx8mm
 - imx8m:
 	- fix secure boot
 - imx ESDHC: fixes
 - i.MX53: Support thum2, bmode and fixes for Menlo board
 	  usbarmory switch to Ethernet driver model
 - imx6 :
 	- DDR calibration for Toradex boards
 - imx7:
 	- Fixes
 - Updated gateworks boards (ventana / venice)
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQS2TmnA27QKhpKSZe309WXkmmjvpgUCYXAPLA8cc2JhYmljQGRl
 bnguZGUACgkQ9PVl5Jpo76ZZdwCfQBZyd9IWYk3vY0lYgCZsBYl8oXoAn0o9BjVu
 tMJRAcFOLxegM4CJAeqC
 =zg72
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20211020' of https://source.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20211020
-------------------

First PR from u-boot-imx for 2022.01

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535

- new board: kontron-sl-mx8mm
- imx8m:
	- fix secure boot
- imx ESDHC: fixes
- i.MX53: Support thum2, bmode and fixes for Menlo board
	  usbarmory switch to Ethernet driver model
- imx6 :
	- DDR calibration for Toradex boards
- imx7:
	- Fixes
- Updated gateworks boards (ventana / venice)

# gpg verification failed.
2021-10-20 14:24:09 -04:00
Marek Vasut
e03aa34bdf doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown
On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are
placed at different offset than on iMX8MM with Fast Boot fuse NOT
blown. List both options and both offsets to avoid confusion.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20 17:58:58 +02:00
Marek Vasut
d0223ff169 doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10
The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the
text which currently says it is in GPR0 while using the correct address
of GPR10.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2021-10-20 17:56:57 +02:00
Fabio Estevam
028abfd9b1 imx8mm-evk: Generate a single bootable flash.bin again
After the conversion to binman in commit 8996e6b7c6 ("imx8mm_evk: switch
to use binman to pack images"), it is necessary to flash both flash.bin and
u-boot.itb to get a bootable system. Prior to this commit, only flash.bin
was needed.

Such new requirement breaks existing distro mechanisms to generate the
final binary because the extra u-boot.itb is now required.

Generate a final flash.bin that can be used again as a single
bootable binary to keep the original behavior.

After this change the SPL binary is called spl.bin, which is a more
descriptive name for its purpose, and can still be used standalone
(for example, for secure boot purposes).

Also update imx8mm_evk.rst to remove the u-boot.itb copy step.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-20 17:46:09 +02:00
Marcel Ziswiler
5cfa55930b verdin-imx8mm: switch to use binman to pack images
Use binman to pack images.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-20 15:08:26 +02:00
Johan Jonker
3ad88ecc6b doc: rockchip: write all brand names with a capital
Brand names are supposed to be written with a capital,
so change them all.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-10-15 20:56:43 +08:00
Johan Jonker
734dcdcbf2 doc: rockchip: sort rockchip support list for rk3188
In the list of mainline U-boot supported Rockchip boards
rk3188 is placed below under the name rv3188. Give back it's
original name and sort the list in alphabetical order.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-10-15 20:56:43 +08:00
Frieder Schrempf
9cab87f184 imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
The Kontron SoM-Line i.MX8MM (N801x) by Kontron Electronics GmbH is a SoM
module with an i.MX8M-Mini SoC, 1/2/4 GB LPDDR4 RAM, SPI NOR, eMMC and PMIC.

The matching evaluation boards (Board-Line) have 2 Ethernets, USB 2.0, HDMI/LVDS,
SD card, CAN, RS485 and much more.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
2021-10-07 17:31:58 +02:00
Frieder Schrempf
e6f48aad15 imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by
Kontron Electronics GmbH.

Currently there are the following SoM flavors (SoM-Line):
  * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
  * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
  * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND

And the according evaluation boards (Board-Line):
  * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
  * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
  * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...

Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config
options at compile-time. Though the differences are so minor, that for
the scope of these SoMs we just use a single defconfig that is compatible
with both SoCs.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>
2021-10-07 16:53:50 +02:00
Teresa Remmet
42cef89e86 arm: dts: imx8mp: Generate single bootable binary
binman conversion made flashing flash.bin
and u-boot.itb necessary. Update binman config
to create a single flash.bin image again.

This updates imx8mp_evk and phyCORE-i.MX8MP as they share the
same binman config.

Updated also imx8mp_evk documentation.

Tested on phyCORE-i.MX8MP.

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2021-10-07 16:53:50 +02:00
Christian Hewitt
506fd30740 doc: boards: amlogic: update for Radxa Zero
Add documentation bits for the Radxa Zero

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: updated u200 MAINTAINERS]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:46 +02:00
Vyacheslav Bocharov
2ae382285b ARM: amlogic: add JetHub D1/H1 docs
Fix doc/board/amlogic/index.rst:
- Add S905W to S905X column.
- Add JetHub devices to the corresponding columns.
- Fix tabs to spaces for table alignment

Add doc/board/amlogic files:
- jethub-j100.rst
- jethub-j80.rst

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00
Neil Armstrong
fe8b4c1080 ARM: amlogic: add Banana Pi M5
Banana Pi BPI-M5 is a credit card format SBC with the following features:
- Amlogic S905X3 quad core Cortex-A55
- Mali-G31 GPU
- 4GB LPDDR4
- 16GB eMMC flash
- 4 USB 3.0
- 1 GbE ethernet
- HDMI output
- 2x LEDS
- SDCard
- 2.5mm Jack with Stereo Audio + CVBS
- Infrared Received
- ADC Button
- GPIO Button
- 40 pins header + 3pins debug header

[narmstrong: add missing CONFIG_SYS_LOAD_ADDR from defconfig]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00