Commit graph

24 commits

Author SHA1 Message Date
Tom Rini
148b8bb4b6 imx: Finish migration of IMX_CONFIG to Kconfig
- Provide a default Kconfig value of the default script
- Largely continue to define this via the board Kconfig file
- For the boards that select a script based on defconfig rather than
  TARGET, keep this within the defconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:46:37 -04:00
Priit Laes
f94ce9eb05 imx: imx8: Update README with somewhat correct firmware versions
Current setup instructions for i.MX8QM MEK board include somewhat
conflicting instructions, so here's an attempt to fix it.

After trying both sets of firmwares, I can conclude that both of
them fail to work:

- no boot at all with imx-sc-firmware-0.7 / firmware-imx-7.6

- partial success with imx-sc-firmware-1.1 / firmware-imx-8.0:

U-Boot 2021.04-rc3-00135-ge0669a43c8 (Mar 08 2021 - 16:49:08 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
mu_hal_receivemsg timeout
Build: SCFW 65afe5f6, SECO-FW 65afe5f6, ATF a-20190
mu_hal_receivemsg timeout
sc_misc_get_boot_dev: res:16
Boot:  SD0
DRAM:  mu_hal_sendmsg timeout
sc_rm_is_memreg_owned: mr:0 res:21
...

Signed-off-by: Priit Laes <priit.laes@paf.com>
2021-05-02 12:46:54 +02:00
Harald Seiler
35b65dd8ef reset: Remove addr parameter from reset_cpu()
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00
Simon Glass
401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
Masahiro Yamada
b75d8dc564 treewide: convert bd_t to struct bd_info by coccinelle
The Linux coding style guide (Documentation/process/coding-style.rst)
clearly says:

  It's a **mistake** to use typedef for structures and pointers.

Besides, using typedef for structures is annoying when you try to make
headers self-contained.

Let's say you have the following function declaration in a header:

  void foo(bd_t *bd);

This is not self-contained since bd_t is not defined.

To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h>

  #include <asm/u-boot.h>
  void foo(bd_t *bd);

Then, the include direcective pulls in more bloat needlessly.

If you use 'struct bd_info' instead, it is enough to put a forward
declaration as follows:

  struct bd_info;
  void foo(struct bd_info *bd);

Right, typedef'ing bd_t is a mistake.

I used coccinelle to generate this commit.

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  typedef bd_t;
  @@
  -bd_t
  +struct bd_info
  </smpl>

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-17 09:30:13 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
691d719db7 common: Drop init.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Simon Glass
4d72caa5b9 common: Drop image.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Peng Fan
e825d3089a imx: imx8qm: update fdt_file according to m4 state
Update fdt_file according to m4 parts state

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Peng Fan
231401de2e imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot
Make sure that all devices that are powered up by SPL are powered down
before entering into the u-boot. Otherwise the subsystem/device will
never be powered down by SCFW, due to SPL and u-boot are in different
partitions.

Benefiting from power domain driver, this patch implements the function
"imx8_power_off_pd_devices" to power off all active devices.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-10 20:55:20 +02:00
Tom Rini
ad647690b1 ---------------------------------
imx8: cleanup, fix warnings
 imx6ull: add VisionSOM SoM and EVK
 mx7ulp: fix warning due network, cleanup
 mx7dsabre: Fix dm probe pmic
 imx6: fixed for vining2000
 
 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
 -----BEGIN PGP SIGNATURE-----
 
 iQHDBAABCgAtFiEEiZClFGvhzbUNsmAvKMTY0yrV63cFAl4m+D4PHHNiYWJpY0Bk
 ZW54LmRlAAoJECjE2NMq1et3hz0L/Rm48j733TNi7ZokndEr0+caMqk6PmJWE0Dy
 Uq4MwhhCkbPWP+uLQUY6yq64HXdx1fNaQnRzPiiaX2Ng9E/E9piOaYOKtKKs1j4q
 W+RiWfrGebgMemb8f2j4cot23KMUVk5/rv+EFn+oJkX7HD4ou/ikB4269/7b75Dg
 1HsrsjWQq7Wsi4baVZZcfs92xTXltpkGEzgKFURt1tqU1TT1I+PX92aM/Df+qUYu
 ++DQTMr0kZ/yMlzxTvUJYN0KRkMnn6W07X/qQyU1YwioQmC1ZJ7zYBNZfoAG1XFs
 0g6+XqfgLsDrTIeqz4/b98exXPdQqFNgRlUFnbVa0hZcehwxFUsb8J9edPl60k3r
 SYTOaIB8KuKstaNnaWJZm678THDrAXwpxSH9/ORRLX9tCnGBOY1Uy9Q+TJtpQ4K+
 YGEeoKhMTMFcWxxZvpT75tvJMtcRdUw9rT+a5yuyD56NdYUmwiEw5c8hBa3vc26X
 C9P5jBxXbZIQQW67wMt0fFT1QdU5RA==
 =qKsO
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-imx-20200121' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

---------------------------------

imx8: cleanup, fix warnings
imx6ull: add VisionSOM SoM and EVK
mx7ulp: fix warning due network, cleanup
mx7dsabre: Fix dm probe pmic
imx6: fixed for vining2000

Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-21 08:36:50 -05:00
Alifer Moraes
8edd0f8a7a imx8qm_mek: Remove unused function detail_board_ddr_info()
detail_board_ddr_info() is not used anywhere, so simply remove it.

This function is only used by Layerscape, not by i.MX.

This was detected by the following sparse warning:

board/freescale/imx8qm_mek/imx8qm_mek.c:102:6: warning: no previous
prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]
2020-01-20 15:38:16 +01:00
Alifer Moraes
c83c00ae67 imx8qm_mek: Include fdt_support.h header
Include fdt_support.h header file to fix the following sparse warning:

board/freescale/imx8qm_mek/imx8qm_mek.c:116:5: warning: no previous
prototype for ‘ft_board_setup’ [-Wmissing-prototypes]

Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20 15:38:16 +01:00
Simon Glass
9a3b4ceb37 common: Move reset_cpu() to the CPU header
Move this function out of common.h and into a relevant header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-17 14:02:31 -05:00
Simon Glass
bcee8d6764 dm: gpio: Allow control of GPIO uclass in SPL
At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass
is included in SPL/TPL without any control for boards. Some boards may
want to disable this to reduce code size where GPIOs are not needed in
SPL or TPL.

Add a new Kconfig option to permit this. Default it to 'y' so that
existing boards work correctly.

Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to
preserve the current behaviour. Also update the 74x164 GPIO driver since
it cannot build with SPL.

This allows us to remove the hacks in config_uncmd_spl.h and
Makefile.uncmd_spl (eventually those files should be removed).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15 08:52:29 +08:00
Simon Glass
5255932f01 common: Move some board functions out of common.h
A number of board function belong in init.h with the others. Move them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:21 -05:00
Peng Fan
84abc8d533 imx8qm: mek: enable dm-spl for pm
with u-boot,dm-spl added for imx8qm-pm node, and SPL_SIMPLE_BUS enabled,
the bind and probe code in board file could be removed.

Also we need to enlarge SYS_MALLOC_F_LEN to avoid calloc fail.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-11-05 10:27:18 +01:00
Peng Fan
62f0bfc016 imx8: update README
After u-boot.cnt is padded to flash.bin automatically by script,
no need to burn the image mannually, so drop the step.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:36:36 +02:00
Peng Fan
f31f8b0434 imx8qm_mek: switch to use container image
Because FIT could not be used for AHAB secure boot on i.MX8,
so switch to use container image that could let SPL verify
ATF and U-Boot with AHAB.

Enable HUSH_PARSER in defconfig to make run netboot could work.

Note: The AHAB related code has not been added.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08 16:35:58 +02:00
Simon Glass
e7dcf5645f env: Drop environment.h header file where not needed
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Anatolij Gustschin
d87b2486e6 arm: imx8: don't duplicate build_info()
Move build_info() to common place.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 20:14:50 +02:00
Anatolij Gustschin
64b5f46975 arm: imx8: factor out uart init code
New imx8 boards started adding duplicated UART init code.
Factor out this to common function sc_pm_setup_uart().

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-07-19 20:14:50 +02:00
Peng Fan
0d331c035a imx: support i.MX8QM MEK board
Add i.MX8QM MEK board support.
Included a basic dts, enabled SPL FIT

Boot log as below:
U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
Normal Boot
Trying to boot from MMC2_2

U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)

CPU:   NXP i.MX8QM RevB A53 at 142933 MHz

Model: Freescale i.MX8QM MEK
Board: iMX8QM MEK
Build: SCFW 9330215b
Boot:  SD1
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:
Error: ethernet@5b040000 address not set.
eth-1: ethernet@5b040000
Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-04-25 17:03:25 +02:00