Commit graph

84508 commits

Author SHA1 Message Date
Tom Rini
b95de034c5 meson64: Fix missing CFG_SYS_BAUDRATE_TABLE migration
CONFIG_SYS_BAUDRATE_TABLE has already been migrated to CFG_SYS but this
instance was missed, correct.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
f3b516852e CONFIG_SYS_MPC8xxx_GUTS_ADDR: Migrate to CFG_SYS
Due to whitespace, CONFIG_SYS_MPC8xxx_GUTS_ADDR wasn't migrated to
CFG_SYS previously. Do this now.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
ade03b55c4 env: nvram: Drop CONFIG_SYS_NVRAM_ACCESS_ROUTINE
This option is unused anywhere and likely untested for quite a long
while. Drop this support code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
5388aa2851 Convert CONFIG_FSL_ESDHC_PIN_MUX to Kconfig
This converts the following to Kconfig:
   CONFIG_FSL_ESDHC_PIN_MUX

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
3a581af21a Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig
This converts the following to Kconfig:

   CONFIG_FLASH_SPANSION_S29WS_N
   CONFIG_FLASH_VERIFY
   CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
   CONFIG_FSL_ISBC_KEY_EXT
   CONFIG_FSL_TRUST_ARCH_v1
   CONFIG_FSL_SDHC_V2_3
   CONFIG_MAX_DSP_CPUS
   CONFIG_MIU_2BIT_INTERLEAVED
   CONFIG_SERIAL_BOOT
   CONFIG_SPI_BOOTING
   CONFIG_X86EMU_RAW_IO

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
98fbad631f Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig
This converts the following to Kconfig:
   CONFIG_FLASH_SHOW_PROGRESS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00
Tom Rini
21491883d2 fec_mxc: Remove CONFIG_FEC_FIXED_SPEED support
This option is only used on one platform currently. However, with PHYLIB
enabled, which this platform also does, this option is not checked and
the functional use case is handled. Remove this code.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
9b0240f8c6 Convert CONFIG_DM9000_BYTE_SWAPPED et al to Kconfig
This converts the following to Kconfig:
   CONFIG_DM9000_BYTE_SWAPPED
   CONFIG_DM9000_NO_SROM
   CONFIG_DM9000_USE_16BIT
   CONFIG_DM9000_DEBUG
   CONFIG_MXC_GPT_HCLK
   CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
6bd2372094 env: Rework ENV_IS_EMBEDDED and related logic slightly
- Drop CONFIG_BUILD_ENVCRC as this is never set directly but instead
  means ENV_IS_EMBEDDED, so reference that in code and rename the Makefile
  usage to BUILD_ENVCRC.
- Remove extra-$(CONFIG_ENV_IS_EMBEDDED) line as it could never be true,
  and likely why there is an extra- line for CONFIG_ENV_IS_IN_FLASH (the
  only use case today of embedded environments).
- With these slight changes we can then see that using the calculated
  symbol of ENV_IS_EMBEDDED is the right thing to use in any code which
  needs to know this situation and can remove CONFIG_ENV_IS_EMBEDDED
  entirely.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
2440b5bb52 Convert CONFIG_HSMMC2_8BIT to Kconfig
This converts the following to Kconfig:
   CONFIG_HSMMC2_8BIT

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
5125e136a9 arm: trats2: Set mmcdev directly
Only this platform sets mmcdev via CONFIG_MMC_DEFAULT_DEV so we
hard-code that default directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
5732cf24dd x530: Remove unused symbols
The symbols CONFIG_UBI_PART and CONFIG_UBIFS_VOLUME are not referenced
anywhere, drop them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:47 -05:00
Tom Rini
b41eb5a27e p1_p2_rdb: Remove unused environment sections
The CONFIG_USB_FAT_BOOT, CONFIG_USB_EXT2_BOOT and CONFIG_NORBOOT defines
are not referenced anywhere, so remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:37 -05:00
Tom Rini
4475d017c5 arm: exynos5: Migrate USB_BOOTING to Kconfig
This symbol is enabled for all exynos5 platforms, move to Kconfig and
select it.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21 19:04:33 -05:00
Tom Rini
7d212af2b1 usb: Update USB_STORAGE dependencies
As it's no longer possible to have !DM_USB set, we can remove these
dependencies.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-21 19:04:33 -05:00
Tom Rini
14f43797d0 Prepare v2023.01-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmOgaw0ACgkQFHw5/5Y0
 tyxIeQv8DfAAB8hN+wWeDhQAJBXBLvV+RrocGJ2lpuWN0DUgT955l0zSjP4eD5I/
 sSsT8iJ15obkbWHq61V9W81Velw5qR+gHW9IAzFKiQBfvdcdfgWFeme9fWp/gqxn
 vvPc2sULA9utkc+kQ+qJy2hmTM7I0ZbKzUwTXSv+Tp9on3vlc0quKSHiZ1EvHNww
 8tW13d1r+Be+CC+GVPrhJojfKBcYVJhW21rJMgb4JdfGNWKmpUpF6fUzHe0wiy2P
 HSnScr44E099t9RDZabw0V1fEgQqxIAmL1qQamXf9ddLZQM9Sq63lygTtGsqg61+
 qeHCZVjPg9cXayGfRVesH8sko3vW+IPuo0Q6Ox0vAyRSyzTpOcTuzn3RcMrq+mfu
 ZRF32aFJKVvAI3xesOj1aCBBYjl4POiHA8i3yeP9KcjqW3So0aphDtxp1idgwOZl
 kIxuC4ItWyF7xoyng/7RWwr2VjcKSyw58stRjfV+WNcByV4+ud1A59vsgZOqO49m
 0bLx5dGu
 =EX/F
 -----END PGP SIGNATURE-----

Merge tag 'v2023.01-rc4' into next

Prepare v2023.01-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-21 13:09:01 -05:00
Tom Rini
1154e965d0 Pull request for efi-2023-01-rc5
UEFI:
 
 * Improve parameter checking in efi_get_next_variable_name_mem()
 * Fix a bugs in management of security database via the eficonfig command
 
 Other:
 
 * Allow sound command to play multiple sounds
 -----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCABAFiEEK7wKXt3/btL6/yA+hO4vgnE3U0sFAmOh4MsiHGhlaW5yaWNo
 LnNjaHVjaGFyZHRAY2Fub25pY2FsLmNvbQAKCRCE7i+CcTdTS6WLEADGtNSMvG+x
 qNBH+2jZc8PnslzXY3FfugSpk29FOFKj4SHwt3p/Du1VPhw1KHWl5gOYTTw/GizI
 t7yfHavyttzUuHoCa2uKUTYN6RDTCHUgzpyGaXCuh89ls1xilzq3YxVcQ9RYeKM1
 lmNIC9rGmTxsWui5VgczkrBzsp8gBj2hs0C+nqJIP+JPGQT1XlA5KXmECsZn8+fi
 GRvGuuflSDzszHOdRClzrtWNt6kLTpNu8D6UormIrTGrHSdDBwO9QFXOyt9qOnA+
 /aboHSd5Oc5BApatTUtRwGoxm0Jm7hujA1EhX6wDsILE/+zMXjmsXS/mbRegYFXY
 Xzu/Wif4ARexECMe0zxHPHf+VA8QYi9QmELzic8Xen5WzHSRBVQd8BtLK/1ItYDT
 LrgPtoyY5eWd3gcjlhgimPPUEqsK45aYXftsv7NcH8K64Yj7UolJL1fcJm8tMkHt
 0ziiO4ZKZjJkJc4c4XUkWQadCnjqDciJkWfAp922PjoV2jBbf7EtNaynUnsiM/R8
 C4oZ7bD1m5gVFLvDsJ9OBy6qHdwRJTn/ETG5H8BlIJ60I9ZZxT4VoUqit+1HQjLx
 zvH98T8OM/N6d/+Q1fJvKg1QIQQxKHnExYBUBn/WxbeWupVe6K77C7TRE7HTz0tO
 A+VslTXg5i2XB1SfFrvvF7EpUtX/kqMOMQ==
 =d09r
 -----END PGP SIGNATURE-----

Merge tag 'efi-2023-01-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2023-01-rc5

UEFI:

* Improve parameter checking in efi_get_next_variable_name_mem()
* Fix a bugs in management of security database via the eficonfig command

Other:

* Allow sound command to play multiple sounds
2022-12-20 12:50:48 -05:00
Tom Rini
566bc672a7 fTPM privileged login
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEgWII69YpahbL5iK5gS8AYozs+qIFAmOhZqUACgkQgS8AYozs
 +qLoRg/+P/g+JiaJuxPTK37xR+qt+5zqBZhTwXTh72J7HO87zvjmIf5zSh6XSHFz
 c8GVNMfu9US+SwXcnivuuOWY8uJ01Nv9zGV+HkQ6o6XUsFfJRS847IiTle7PaNCF
 U5l2KX1k+RGRg2N8RHRFE5m3PU+F8ohz468kL2IMnvQCiAI30q4zYlwUTHURlM/Y
 XyH4qzs5WEDS223M1WJHy36e1FdJjpPa2GPcxZb4SZugcPXpI8Ptlf6H1iLolYmQ
 M3YpgtXxzmof95YLct9kaQX/722WCnwokB7P1H2Y7gblhkWdjytjmdexvQdt9UFk
 0tTMJZK/+P0teTOeylNhxSgMOvt4FaFRtGzGMd+8X2KuxzsGpdcVWjAKU+JVWE/g
 rL3k9G/GKYTnFQNX6YRM8nqo3kmnJHzo4lc+nDLKyc1M9m7zVPu6Nl8BebED3VMu
 N1CR2lG69VZUQfqA78NtCHNsjiHQbKiuLfzh1lfRLSEHcUE2yqmjFR0Dgw2sOjlM
 Um4ao+7Yef43DFub58Q9W5W51Kpwlg3ltGHpif3a2jCJfoAdnXoVKCN+I6/YvBUf
 8Mlwhtt0Zl8kMe321R6KPlYQRt0/b8lIr/IBWEvU0QD9rNuzOjN7WjN2qvBX6sS6
 1uh1+aYCyiiGsW9htLZRHZ0kxuntlx6QLQarHC5f5x3PbW/JnaE=
 =bvqT
 -----END PGP SIGNATURE-----

Merge tag 'tpm-20122022' of https://source.denx.de/u-boot/custodians/u-boot-tpm

fTPM privileged login
2022-12-20 12:50:24 -05:00
Masahisa Kojima
ad50ca5019 eficonfig: EFI_VARIABLE_APPEND_WRITE is not set for null key
The signed null key with authenticated header is used to clear
the PK, KEK, db and dbx. When CONFIG_EFI_MM_COMM_TEE is enabled
(StMM and OP-TEE based RPMB storage is used as the EFI variable
storage), clearing KEK, db and dbx by enrolling a signed null
key does not work as expected if EFI_VARIABLE_APPEND_WRITE
attritube is set.

This commit checks the selected file is null key, then
EFI_VARIABLE_APPEND_WRITE attibute will not be used for the null key.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-20 16:06:48 +01:00
Heinrich Schuchardt
9ba35e64fa efi_selftest: conformance test for GetNextVariableName
Test that GetNextVariableName() checks the parameters.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Heinrich Schuchardt
70a4ac693d efi_loader: fix efi_get_next_variable_name_mem()
The VariableNameSize parameter is in bytes but u16_strnlen() counts u16.

Fix the parameter check for null termination.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Masahisa Kojima
645502743a eficonfig: avoid SetVariable between GetNextVariableName calls
The current code calls efi_set_variable_int() to delete the
invalid boot option between calls to efi_get_next_variable_name_int(),
it may produce unpredictable results.

This commit moves removal of the invalid boot option outside
of the efi_get_next_variable_name_int() calls.
EFI_NOT_FOUND returned from efi_get_next_variable_name_int()
indicates we retrieved all EFI variables, it should be treated
as EFI_SUCEESS.

To address the checkpatch warning of too many leading tabs,
combine two if statement into one.

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Masahisa Kojima
ce3270849b eficonfig: carve out efi_get_next_variable_name_int calls
To retrieve the EFI variable name by efi_get_next_variable_name_int(),
the sequence of alloc -> efi_get_next_variable_name_int ->
realloc -> efi_get_next_variable_name_int is required.
In current code, this sequence repeatedly appears in
the several functions. It should be curved out a common function.

This commit also fixes the missing free() of var_name16
in eficonfig_delete_invalid_boot_option().

Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Heinrich Schuchardt
f823e32388 test: add unit test for u16_strnlen()
Add the missing unit test. It can be executed with:

    ut unicode u16_strnlen

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 16:06:48 +01:00
Heinrich Schuchardt
f9178e19a1 doc: correct heading level in printenv man-page
The 'Configuration' heading should be on level 2, not on level 1.

Fixes: eaa268589e ("doc: man-page for the printenv command")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-20 16:06:48 +01:00
Heinrich Schuchardt
ea58b9a404 cmd: allow sound command to play multiple sounds
Currently the sound command accepts only one value each for duration and
frequency. Allowing more duration and frequency arguments enables playing a
tune.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-20 16:06:48 +01:00
Eugen Hristev
8374617637 ARM: dts: at91: sama5d2: fix wrong interrupt-cells property
The PMC node is not an interrupt provider, so it must not have
interrupt-cells.

This fixes the warning (on newer DTC):
arch/arm/dts/sama5d2.dtsi:82.22-602.6: Warning (interrupt_provider): /ahb/apb/pmc@f0014000: '#interrupt-cells' found, but node is not an interrupt provider

Fixes: 2c4b2dd289 ("ARM: at91/dt: Add device tree for SAMA5D2 Xplained")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-20 11:59:07 +02:00
Mihai Sain
a60c5a986e ARM: mach-at91: add support for sama7g5 chip id and extended id definition
Add SAMA7G5 series chip id definitions to align with linux SoC driver.
Add support for SAMA7G5 System-In-Package (SIP):
SAMA7G54D1G, SAMA7G54D2G, SAMA7G54D4G.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
2022-12-20 11:59:07 +02:00
Eugen Hristev
4df35b38d1 ARM: dts: at91: sama7g5/sama7g5ek: align DT with kernel 6.1
Align the DT with current Linux 6.1 tree, wherever possible.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-20 11:59:07 +02:00
Eugen Hristev
9859b9a722 sysreset: at91: add compatible with microchip, sama7g5-rstc
As documented in bindings doc in kernel 6.0:
https://elixir.bootlin.com/linux/v6.0/source/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-20 11:59:07 +02:00
Eugen Hristev
f2d6c888f4 dt-bindings: mfd: add at91-usart.h from Linux
Copy include file dt-bindings/mfd/at91-usart.h from Linux

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-12-20 11:59:07 +02:00
Etienne Carriere
33ba80303e tpm2: ftpm: open session with privileged ree login
Opens the fTPM session with TEE_LOGIN_REE_KERNEL as fTPM may restrict
access to that login when Linux based OS is running as applications are
expected to got through the Linux TPMv2 driver.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20 09:37:36 +02:00
Tom Rini
2243922edc Prepare v2023.01-rc4
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-19 08:45:26 -05:00
Tom Rini
daa531cc5c Merge tag 'u-boot-rockchip-20221219' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Only call binman when TPL available;
- rk3128 DTS fix;
- Fix GPT table corruption for rk3399 puma ;
- Fix i2c for rk3399 Pinebookpro;
- Enable UEFI capsule update for RockPi4;
2022-12-19 08:33:24 -05:00
Sughosh Ganu
bdd3a47e02 rockpi4: capsule: Enable UEFI capsule update on RockPi4 boards
Enable the UEFI capsule update functionality on the RockPi4B and
RockPi4C boards. Support is being enabled for updating the idbloader
and u-boot firmware images residing on GPT partitioned uSD card
storage device.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Sughosh Ganu
e86c789ca3 rockpi4: board: Add firmware image information for capsule updates
Add information that will be needed for enabling the UEFI capsule
update feature on the RockPi4 boards. With the feature enabled, it
would be possible to update the idbloader and u-boot.itb images on the
RockPi4B and RockPi4C variants.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Sughosh Ganu
bea9267d7e rockchip: capsule: Add functions for supporting capsule updates
Add functions needed to support the UEFI capsule update feature on
rockchip boards. Currently, the feature is being enabled on the
RockPi4 boards with firmware images residing on GPT partitioned
storage media.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
John Keeping
b5194c2258 phy: rockchip: handle clock without enable function
If a clock doesn't supply the enable hook, clk_enable() will return
-ENOSYS.  In this case the clock is always enabled so there is no error
and the phy initialisation should continue.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Michal Suchanek
216928c772 rockchip: Pinebook Pro: Do not initialize i2c before relocation
The i2c locks up when initialized before relocation, and it stays broken
in Linux as well breaking the ability to boot Linux.

The i2c bus and pmic was not actually used in pre-reloc before
commit ad607512f5 ("power: pmic: rk8xx: Support sysreset shutdown method")

The cause is not known.

This is board-specific, other boards that do not add the option to
include the i2c bus in pre-reloc DT are not affected.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Quentin Schulz
c74f6e748b rockchip: puma: fix GPT table corruption when saving U-Boot environment
The GPT table is taking the first 34 sectors, which amounts to 0x4400
bytes. Saving the environment below this address in storage will corrupt
the GPT table.

While technically the table ends at 0x4400, some tools (e.g. bmaptool)
are rounding everything to the logical block size (0x1000), so it is
safer to make it point to 0x5000 so that the environment could still
persist when flashing a sparse image with bmaptool or similar tools.

Obviously, the default 0x4000 environment size does not work anymore, so
let's set it to 0x3000 so it does fill the gap between the GPT table
(rounded to 0x1000) and the start of the idbloader.img.

Fixes: 56f580d3eb ("rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
FUKAUMI Naoki
75a364eb05 arm: dts: rockchip: enable ums/rockusb command for ROCK Pi 4
this patch add USB mass storage function and Rockusb function for
Radxa ROCK Pi 4 series.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Manoj Sai
22e443c76d configs:rockchip:roc-rk3399-pc:Enable more configs
This patch enables the following:

1) use preboot configuration to enable usb devices.

2) Enable USB configs so keyboards and other USB devices work,
   update the number of ports of the usb root hub.

   - with this addition the updated USB device Tree:

	1  Hub (12 Mb/s, 0mA)
	U-Boot Root Hub
	1  Hub (12 Mb/s, 0mA)
	|   U-Boot Root Hub
	|
	+-2  Hub (12 Mb/s, 100mA)
	USB 2.0 Hub [MTT]

	1  Hub (5 Gb/s, 0mA)
	U-Boot XHCI Host Controller

3) enable crypto RNG support.

4) Change SPI speed and frequency:
    - increase the maximum SPI slave device speed,
      SPI flash max frequency for the environment from 10Mhz to 30MHz.

    - performance stats for speed update from 10MHz to 30MHz:

    	with 10Mhz speed update:
    	 => sf update 0x300000 0x800000 0x400000
    	    4194304 bytes written, 0 bytes skipped in 36.819s, speed 119837 B/s

        with 30Mhz speed update:
    	 => sf update 0x300000 0x800000 0x400000
    	    4194304 bytes written, 0 bytes skipped in 20.319s, speed 220752 B/s

Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Da Xue <da.xue@libretech.co>
Signed-off-by: dsx724 <da@lessconfused.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
58eb6675da arm: dts: rockchip: rk3128: fix clocks, compatible and phys
Fix rk3128 clocks, compatible and phys, so that they match the bindings.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
565d77b4c0 arm: dts: rockchip: rk3128: fix DT node names
The rk3128 DT node names should be generic.
Rename them to the pattern defined in the DT bindings.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
b919d43af5 arm: dts: rockchip: move all rk3128 u-boot specific properties in separate dtsi files
Move all rk3128 u-boot specific properties in separate dtsi files.
Sort emmc node.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
c643468849 arm: dts: rockchip: rk3128: bulk convert gpios to their constant counterparts
Bulk convert rk3128 DT gpios to their constant counterparts.

sed -i -f script.sed rk3128.dtsi
sed -i -f script.sed rk3128-evb.dts

================================

/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]*  *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]*  *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]*  *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]*  *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]*  *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]*  *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]*  *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]*  *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]*  *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]*  *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]*  *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]*  *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]*  *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]*  *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]*  *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]*  *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]*  *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]*  *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]*  *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]*  *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]*  *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]*  *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]*  *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]*  *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]*  *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]*  *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]*  *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]*  *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]*  *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]*  *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]*  *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]*  *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)RK_FUNC_\([1-9]\) /<\1\2 /g

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Johan Jonker
4d89330b8a rockchip: rk3128-cru: sync the clock dt-binding header from Linux
In order to update the DT for rk3128
sync the clock dt-binding header.
This is the state as of v6.0 in Linux.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
FUKAUMI Naoki
96d926cac3 rockchip: enable fdt overlays for ROCK Pi 4 series
add CONFIG_OF_LIBFDT_OVERLAY=y to support fdt overlays.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19 10:56:12 +08:00
Kever Yang
f5315dd629 rockchip: Only call binman when TPL available
Rockchip platform use TPL to do the DRAM initialize for all the SoCs,
if TPL is not available, means no available DRAM init program, and the
u-boot-rockchip.bin is not functionable.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Change-Id: I2299f1eddce5aa7d5fb1a3fb4d8aeaa995b397fa
2022-12-19 10:55:58 +08:00
Tom Rini
93685d0dcb Makefile: With BINMAN_ALLOW_MISSING=1 don't error on missing
When the user builds with BINMAN_ALLOW_MISSING=1 they're explicitly
setting the flag to allow for additional binaries to be missing and so
have acknowledged the output might not work. In this case we want to
default to not passing a non-zero exit code.

Cc: Simon Glass <sjg@chromium.org>
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-18 20:50:40 -05:00