Commit graph

3153 commits

Author SHA1 Message Date
Mike Frysinger
2b66f08f25 Blackfin: punt old unused mem_init.h header
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:50 -04:00
Mike Frysinger
bcc121a016 Blackfin: delete unused page_descriptor_table_size define
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:49 -04:00
Mike Frysinger
30fb9d24ae Blackfin: fix typo in boot mode comment and add NAND define
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:49 -04:00
Ben Maan
2e5cbe5461 Blackfin: fix port mux defines for BF54x
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:49 -04:00
Mike Frysinger
0656ef2ba2 Blackfin: update anomaly lists
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:49 -04:00
Mike Frysinger
50ca954028 Blackfin: unify DSPID/DBGSTAT MMR definitions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-10-23 05:03:49 -04:00
Anton Vorontsov
3bf1be3c0c mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
With this patch u-boot can fixup the dr_mode and phy_type properties
for the Dual-Role USB controller.

While at it, also remove #ifdefs around includes, they are not needed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:40:01 -05:00
Anton Vorontsov
b3379f3fd1 mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
Though NAND chip is replaceable on the MPC837XE-MDS boards, the
current settings don't work with the default chip on the board.
Nevertheless Freescale's U-Boot sets the option register correctly,
so I just dumped the register from the working u-boot. My guess is
that the old settings were applicable for some pilot boards, not
found in the production.

This patch also enables FSL ELBC driver so that we could access
the NAND storage in the u-boot.

The NAND support costs about 45KB, so the u-boot no longer fits
into two 128KB NOR flash sectors, thus we also have to adjust
environment location: add another 128KB to the monitor length.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>

It is due to hardware design and logic defect, that is the
I/O[0:7] of NAND chip is connected to LAD[7:0], so when
the NAND chip connected to nLCS3,  you have to set up the
OR3[BCTLD] = '1' for normal operation, otherwise it will have
bus contention due to the pin 48/25 of U60 is enabled.

Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
asserted upon access to the NAND chip, keep the default state.

Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:34:17 -05:00
Anton Vorontsov
00f7bbae92 mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
standalone or acting as a PCI agent. User's Guide says:

- When the CPLD recognizes its location on the PIB it automatically
  configures RCW to the PCI Host.
- If the CPLD fails to recognize its location then it is automatically
  configured as an Agent and the PCI is configured to an external arbiter.

This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
any arbiter bad things will happen (here the board hangs during any config
space reads).

In this situation we must disable the PCI. And in case of anybody really
want to use an external arbiter, we provide "pci_external_aribter"
environment variable.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:34:14 -05:00
Anton Vorontsov
1da83a63d8 mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
This involves configuring the SerDes and fixing up the flags and
PHY addresses for the TSECs.

For Linux we also fix up the device tree.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:34:08 -05:00
Anton Vorontsov
e6d9c8916d mpc83xx: add TSECs' HRCWH masks for MPC837x processors
We'll use these masks to parse TSEC modes out of HRCWH.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:34:05 -05:00
Anton Vorontsov
6f9cc6608b mpc83xx: serdes: add forgotten shifts for rfcks
The rfcks should be shifted by 28 bits left. We didn't notice the bug
because we were using only 100MHz clocks (for which rfcks == 0).

Though, for SGMII we'll need 125MHz clocks.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:34:01 -05:00
Anton Vorontsov
5c2ff323a9 mpc83xx: mpc8360emds: rework LBC SDRAM setup
Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
it difficult to use (b/c then the memory is discontinuous and
there is quite big memory hole between the DDR/SDRAM regions).

This patch reworks LBC SDRAM setup so that now we dynamically
place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
DDR memory).

With this patch we're able to:

- Boot without external DDR memory;
- Use most "DDR + SDRAM" setups without need to support for
  sparse/discontinuous memory model in the software.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-10-21 18:31:07 -05:00
Wolfgang Denk
def0819e92 FDT: don't use private kernel header files
On some systems (for example Fedora Core 4) U-Boot builds with the
following wanrings only:

...
In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
                 from fdt.c:51:
		 /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!

This patch fixes this problem.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 21:35:44 +02:00
Wolfgang Denk
06c2942218 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2008-10-21 21:19:35 +02:00
Stefan Roese
43cbce69d4 ppc4xx: Correctly setup ranges property in ebc node
Previously only the NOR flash mapping was written into the ranges
property of the ebc node. This patch now writes all enabled chip
select areas into the ranges property.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:35:02 +02:00
Dirk Eibach
d7b26d5832 ppc4xx: Add GDSys neo 405EP board support
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:35:02 +02:00
Niklaus Giger
c11da19454 ppc4xx: Update configs for Netstal boards
I reorganized my config files, putting the common stuff into netstal-common.h
(got the idea by looking a amcc-common.h from Stefan).

Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:34:57 +02:00
Adam Graham
c9c11d751e ppc4xx: Add routine to retrieve CPU number
Provide a weak defined routine to retrieve the CPU number for
reference boards that have multiple CPU's.  Default behavior
is the existing single CPU print output.  Reference boards with
multiple CPU's need to provide a board specific routine.
See board/amcc/arches/arches.c for an example.

Signed-off-by: Adam Graham <agraham@amcc.com>
Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:34:56 +02:00
Adam Graham
f09f09d389 ppc4xx: Add AMCC Arches board support (dual 460GT)
The Arches Evaluation board is based on the AMCC 460GT SoC chip.
This board is a dual processor board with each processor providing
independent resources for Rapid IO, Gigabit Ethernet, and serial
communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
FLASH, UART, EEPROM and temperature sensor, along with a shared debug
port. The two 460GT's will communicate with each other via shared
memory, Gigabit Ethernet and x1 PCI-Express.

Signed-off-by: Adam Graham <agraham@amcc.com>
Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:34:46 +02:00
Wolfgang Denk
055b12f2ff TQM8260: environment in flash instead EEPROM, baudrate 115k
Several customers have reported problems with the environment in
EEPROM, including corrupted content after board reset. Probably the
code to prevent I2C Enge Conditions is not working sufficiently.

We move the environment to flash now, which allows to have a backup
copy plus gives much faster boot times.

Also, change the default console initialization to 115200 bps as used
on most other boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:27:53 +02:00
Wolfgang Denk
d50c7d4be1 strmhz(): Round numbers when printing clock frequencies
Round clock frequencies for printing.

Many boards printed off clock frequencies like 399 MHz instead of the
exact 400 MHz because numberes were not rounded. This is fixed now.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:35 +02:00
Timur Tabi
681c02d05b 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
to add a comment that the correct value disagrees with the 8544 reference
manual.  The changelog for that commit is also wrong, as it says "bit 28"
when it should be "bit 24".

Signed-off-by: Timur Tabi <timur@freescale.com>
2008-10-21 11:15:20 +02:00
Markus Klotzbuecher
50bd0057ba Merge git://git.denx.de/u-boot into x1
Conflicts:

	drivers/usb/usb_ohci.c
2008-10-21 09:18:01 +02:00
Wolfgang Denk
f82642e338 Merge 'next' branch
Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-18 21:59:44 +02:00
Heiko Schocher
360fe71e82 mgcoge: add redundant environment sector
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:08 +02:00
Heiko Schocher
53ebf0c470 mgsuvd: update size of environment
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:08 +02:00
Jason Jin
2e26d837f1 Enabled the Freescale SGMII riser card on 8536DS
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2008-10-18 21:54:08 +02:00
Liu Yu
7e183cad0c Enabled the Freescale SGMII riser card on 8572DS
This patch based on Andy's work.
Including command 'pixis_set_sgmii' support.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
2008-10-18 21:54:07 +02:00
Liu Yu
bff188baf9 Make pixis_set_sgmii more general to support MPC85xx boards.
The pixis sgmii command depend on the FPGA support on the board, some 85xx
boards support SGMII riser card but did not support this command, define
CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.

Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
PIXIS_VCFGEN1_MASK in header file for both boards.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
2008-10-18 21:54:07 +02:00
Haiying Wang
4ca06607d6 Add ddr interleaving suppport for MPC8572DS board
* Add board specific parameter table to choose correct cpo, clk_adjust,
write_data_delay, 2T based on board ddr frequency and n_ranks.

* Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.

* Set memory controller interleaving mode to bank interleaving, and disable
bank(chip select) interleaving mode by default, because the default on-board
DDR DIMMs are 2x512MB single-rank.

* Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:05 +02:00
Haiying Wang
dfb49108e4 Pass dimm parameters to populate populate controller options
Because some dimm parameters like n_ranks needs to be used with the board
frequency to choose the board parameters like clk_adjust etc. in the
board_specific_paramesters table of the board ddr file, we need to pass
the dimm parameters to the board file.

* move ddr dimm parameters header file from /cpu to /include directory.
* add ddr dimm parameters to populate board specific options.
* Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Haiying Wang
dbbbb3abef Make DDR interleaving mode work correctly
Fix some bugs:
  1. Correctly set intlv_ctl in cs_config.
  2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
  3. Set base_address and total memory for each ddr controller in memory
     controller interleaving mode.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Kumar Gala
1c9aa76bf9 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-18 21:54:04 +02:00
Kumar Gala
54e091d3b6 85xx: Export invalidate_{i,d}cache and add flush_dcache
Added the ability for C code to invalidate the i/d-cache's and
to flush the d-cache.  This allows us to more efficient change mappings
from cache-able to cache-inhibited.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-18 21:54:04 +02:00
Heiko Schocher
a21ca95f8b mgsuvd: fix compiler warning when using soft_i2c driver
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:04 +02:00
Heiko Schocher
cac9cf7875 mgsuvd: fix coding style
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:04 +02:00
Heiko Schocher
e02d4a9904 mgcoge: added CONFIG_FIT to support the new u-boot image format
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Kumar Gala
b799cb4c0e Expose command table search for sub-commands
Sub-command can benefit from using the same table and search functions
that top level commands have.  Expose this functionality by refactoring
find_cmd() and introducing find_cmd_tbl() that sub-command processing
can call.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-18 21:54:02 +02:00
Heiko Schocher
f7e51b2750 mgsuvd, mgcoge: added BOOTCOUNT feature.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:02 +02:00
Heiko Schocher
8f64da7f83 mgcoge, mgsuvd: added support for the IVM EEprom.
The EEprom contains some Manufacturerinformation,
which are read from u-boot at boot time, and saved
in same hush shell variables.

Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:02 +02:00
Heiko Schocher
81473f6781 hush: add showvar command for hush shell.
This new command shows the local variables defined in
the hush shell:

=> help showvar
showvar
    - print values of all hushshell variables
showvar name ...
    - print value of hushshell variable 'name'

Also make the set_local_var() and unset_local_var ()
no longer static, so it is possible to define local
hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
is defined, u-boot calls hush_init_var (), where
boardspecific code can define local hush shell
variables at boottime.

Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:02 +02:00
Heiko Schocher
67b23a3228 I2C: adding new "i2c bus" Command to the I2C Subsystem.
With this Command it is possible to add new I2C Busses,
which are behind 1 .. n I2C Muxes. Details see README.

Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:02 +02:00
Heiko Schocher
c24853644d mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
As documented in doc/I2C_Edge_Conditions, adding a
board specific deblocking mechanism via CFG_I2C_INIT_BOARD
for the mgcoge and mgsuvd board.

This code was originally written by Keymile in association
with Anatech and Atmel in 1998. The Code toggels the SCL
until the SCA line goes to HIGH (max. 16 times).
And after this, a start condition is sent.

This is another approach to deblock the I2C Bus. The
soft I2C driver actually sends 9 clocks with SDA High,
and then a stop at the end, to deblock the I2C Bus.

Maybe we should use the approach from Keymile as
the new standard?

Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:02 +02:00
Heiko Schocher
e5e4edd9f1 mgcoge, mgsuvd: add DTT (LM75) support.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:02 +02:00
Heiko Schocher
f2202450c7 mgcoge, mgsuvd: added EEprom support.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:01 +02:00
Heiko Schocher
9661bf9d12 mgcoge, mgsuvd: add I2C support.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:01 +02:00
Heiko Schocher
98aed37958 soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
This patch fixes the following warnings, when using
the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
systems:

soft_i2c.c: In function 'send_reset':
soft_i2c.c:93: warning: unused variable 'immr'
soft_i2c.c: In function 'send_start':
soft_i2c.c:124: warning: unused variable 'immr'
soft_i2c.c: In function 'send_stop':
soft_i2c.c:146: warning: unused variable 'immr'
soft_i2c.c: In function 'send_ack':
soft_i2c.c:171: warning: unused variable 'immr'
soft_i2c.c: In function 'write_byte':
soft_i2c.c:196: warning: unused variable 'immr'
soft_i2c.c: In function 'read_byte':
soft_i2c.c:244: warning: unused variable 'immr'

Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:01 +02:00
Dirk Eibach
1c6fe6eac7 hwmon: Add LM63 support
This patch adds support for the National LM63 temperature
sensor with integrated fan control. It's used on the GDSys
Neo board (405EP) which will be submitted later.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Stefan Roese <sr@denx.de>
2008-10-18 21:54:01 +02:00