Commit graph

10630 commits

Author SHA1 Message Date
Heiko Schocher
ece91016c4 arm: am335x: siemens board use in DFU mode fullspeed only
Siemens boards are now using DFU in fullspeed only. For
this CONFIG_USB_GADGET_DUALSPEED is undefined.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Liu Bin <b-liu@ti.com>
Cc: Lukas Stockmann <lukas.stockmann@siemens.com>
2014-10-06 14:50:43 +02:00
Hans de Goede
8a8a2257ec usb: kbd: Allow "usb reset" to continue when an usb kbd is used
Use the new force parameter to make the stdio_deregister succeed, replacing
stdin with a nulldev, and assume that the usb keyboard will come back after
the reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:43 +02:00
Hans de Goede
32d019265d stdio: Add force parameter to stdio_deregister
In some cases we really want to move forward with a deregister, add a force
parameter to allow this, and replace the dev with a nulldev in this case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:43 +02:00
Masahiro Yamada
5894ca007d ARM: UniPhier: add UniPhier SoC support code
These are used by Panasonic UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-05 14:10:09 +09:00
DrEagle
8ca21cbea2 ARM: sheevaplug: add HUSH parser
This patch add HUSH command parser

Signed-off-by: Gerald Kerma <drEagle@doukki.net>

 Changes in v1:
 - add HUSH command parser
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01 07:05:09 -04:00
DrEagle
1e3d640316 ARM: sheevaplug: redefine MTDPARTS
This patch redefine MTDPARTS

Signed-off-by: Gerald Kerma <drEagle@doukki.net>

 Changes in v1:
 - redefine MTDPARTS
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01 07:05:02 -04:00
DrEagle
65ae9523d9 ARM: sheevaplug: add MTD defaults
This patch add MTDIDS and MTDPARTS defaults settings to sheevaplug

Signed-off-by: Gerald Kerma <drEagle@doukki.net>

 Changes in v1:
 - add MTDIDS and MTDPARTS default to sheevaplug
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01 07:04:55 -04:00
DrEagle
0f88a5a98e ARM: sheevaplug: add MVSATA driver
This patch add MVSATA driver to sheevaplug

Signed-off-by: Gerald Kerma <drEagle@doukki.net>

 Changes in v1:
 - add MVSATA driver to sheevaplug
 - enable ext4 FS support
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01 07:04:47 -04:00
DrEagle
4dfb0e4d3e ARM: sheevaplug: change env location
This patch move the environment offset in sheevaplug.
The size of the u-boot binary is become too big.
Fix saving environments was result of corrupting the u-boot.

Signed-off-by: Gerald Kerma <drEagle@doukki.net>

 Changes in v2:
 - patch description

 Changes in v1:
 - fix sheevaplug environment offset
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2014-10-01 07:04:32 -04:00
Fabio Estevam
9f87640c03 wandboard: Select CONFIG_CMD_FUSE
Select CONFIG_CMD_FUSE so that the fuse API commands can be used.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-10-01 09:13:29 +02:00
Ye.Li
661139faf7 imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards
Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2
arm2 board. Since the LPDDR2 arm2 board has different DDR size, use
CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-30 12:21:14 +02:00
Ye.Li
b357503f1c imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board
This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
pin-pin compatible with i.MX6Q.

The patch also support the DDR 32-BIT mode option. Please define
CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
mode.But due to the board design, it's 64bit DDR buswidth physically,
so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-30 12:21:14 +02:00
Marek Vasut
febae49a2b arm: m53evk: Enable FS_GENERIC
Enable the CONFIG_CMD_FS_GENERIC on m53evk to avoid per-fs specific commands
and tweak the environment to cater for this new option.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-09-29 11:38:44 +02:00
Marek Vasut
fc532a921a arm: m28evk: Enable FS_GENERIC
Enable the CONFIG_CMD_FS_GENERIC on m28evk to avoid per-fs specific commands
and tweak the environment to cater for this new option.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-09-29 11:37:16 +02:00
Marek Vasut
14b256e5c0 arm: m53evk: Test if bootscript exists before loading it
Make sure the boot.scr exists on the card before loading it
from the card to avoid annoying message on the console.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-09-29 11:36:55 +02:00
Marek Vasut
4ba9b1c2e3 arm: m28evk: Test if bootscript exists before loading it
Make sure the boot.scr exists on the card before loading it
from the card to avoid annoying message on the console.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-09-29 11:35:54 +02:00
Ye.Li
adca1875c8 imx: mx6qarm2: Change the mmcroot and mmcpart env value
1. Set the image load partition to the first FAT partition.
2. Set the kernel rootfs partition to the second partition.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-29 10:12:41 +02:00
Ye.Li
e7380a1fdc imx: mx6qarm2: Add the kernel FDT Loading support
To support loading FDT file for kernel, add the fdt address,
file and loading script to arm2 board default environment.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-29 10:12:41 +02:00
Tom Rini
be9f643ae6 Merge branch 'for-tom' of git://git.denx.de/u-boot-dm 2014-09-26 20:10:48 -04:00
Simon Glass
248a0488bf spi: Add brackets and tidy defines in spi.h
Some of the #defines in spi.h are not bracketed. To avoid future mistakes
add brackets. Also add an explanatory comment for SPI_CONN_DUAL_...

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-26 15:01:15 -06:00
Simon Glass
5e74934d40 sandbox: config: Enable all SPI flash chips
Sandbox may as well support everything. This increases the amount of code
that is built/tested by sandbox, and also provides access to all the
supported SPI flash devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-09-26 15:00:48 -06:00
Tom Rini
2c2277f15c Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq 2014-09-26 09:57:52 -04:00
Tom Rini
2c3dc792b6 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2014-09-26 09:51:18 -04:00
York Sun
c7eae7fcb1 board/ls1021aqds: Add DDR4 support
LS1021AQDS has a variant with DDR4 slot. This patch adds a new defconfig
for this variant to enable DDR4 support. RAW timing parameters are not
added for DDR4. The board timing parameters are only tuned for single-
rank 1600 and 1800MT/s with Micron DIMM 9ASF51272AZ-2G1A1 due to DIMM
availability.

Signed-off-by: York Sun <yorksun@freescale.com>
CC: Alison Wang <alison.wang@freescale.com>
2014-09-25 09:12:12 -07:00
York Sun
8aeb893a8e ARMv8/ls2085a: Move u-boot location to make room for RCW
When booting with SP, RCW resides at the beginning of IFC NOR flash.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:19 -07:00
York Sun
8bfa301b0a ARMv8/ls2085a: Enable secondary cores
Spin table is at the very beginning of boot code. Each core has an individual
release address within the spin table, the ft_cpu_setup fn updates the
"cpu-release-addr" property of each cpu node with the corresponding release
address.

Also fix CPU_RELEASE_ADDR to point to secondary_boot_func.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
2014-09-25 08:36:19 -07:00
Arnab Basu
f43b4356a7 fdt_support: Make of_bus_default_count_cells non static
of_bus_default_count_cells can be used to get the #address-cells
and #size-cells defined by the current node's parent node. This
is required when using of_read_number to read from FDT nodes that
can be 32 or 64 bytes depending on values defined by the parent.

Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
2014-09-25 08:36:19 -07:00
Arnab Basu
08df4a21c7 fdt_support: Move of_read_number to fdt_support.h
This is being done so that it can be used outside 'fdt_support.c'. Making
life more convenient when reading device node properties that can be 32
or 64 bits long.

Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
2014-09-25 08:36:19 -07:00
York Sun
bb5783224b driver/ddr/fsl: Fix tXP and tCKE
The driver was written using old DDR3 spec which only covers low speeds.
The value would be suboptimal for higher speeds. Fix both timing according
to latest DDR3 spec, remove tCKE as an config option.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:18 -07:00
York Sun
d9c68b1444 ARMv8/ls2085a_emu: Enable DP-DDR as standalone memory block
DP-DDR is used for DPAA, separated from main memory pool for general
use. It has 32-bit bus width and use a standard DDR4 DIMM (64-bit).

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:18 -07:00
York Sun
1d71efbb03 driver/ddr: Restruct driver to allow standalone memory space
U-boot has been initializing DDR for the main memory. The presumption
is the memory stays as a big continuous block, either linear or
interleaved. This change is to support putting some DDR controllers
to separated space without counting into main memory. The standalone
memory controller could use different number of DIMM slots.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:18 -07:00
Prabhakar Kushwaha
e211c12e77 board/ls2085a: Add support of NOR and NAND flash for simulator
Add support of NOR and NAND flash for simulator target.
Here
  IFC - CS0: NOR flash
  IFC - CS1: NAND flash

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-25 08:36:17 -07:00
Masahiro Yamada
f1ef2b6233 kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig
This option specifies the default Device Tree used for the run-time
configuration of U-Boot.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Michal Simek <michal.simek@xilinx.com>
2014-09-25 09:31:24 -04:00
Masahiro Yamada
783e6a72b8 kconfig: move CONFIG_OF_* to Kconfig
This commit moves:
  CONFIG_OF_CONTROL
  CONFIG_OF_SEPARATE
  CONFIG_OF_EMBED
  CONFIG_OF_HOSTFILE

Because these options are currently not supported for SPL,
the "Device Tree Control" menu does not appear in the SPL
configuration.

Note:
zynq-common.h should be adjusted so as not to change the
default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-09-25 09:27:50 -04:00
Jeroen Hofstee
0a5051ce6e compiler_gcc: prevent redefining attributes
The libc headers on FreeBSD and likely related projects as well contain an
header file, cdefs.h which provides similiar functionality as linux/compiler.h.
It provides compiler independent defines like __weak __packed, to allow
compiling with multiple compilers which might have a different syntax for such
extension.

Since that header file is included in multiple standard headers, like stddef.h
and stdarg.h, multiple definitions of those defines will be present if both are
included. When compiling u-boot the compiler will warn about it hundreds of
times since e.g. common.h will include both files indirectly.

commit 7ea50d5284 "compiler_gcc: do not redefine
__gnu_attributes" prevented such redefinitions, but this was undone by commit
fb8ffd7cfc "compiler*.h: sync
include/linux/compiler*.h with Linux 3.16".

Add the checks back where necessary to prevent such warnings.

As the original patch this checkpatch warning is ignored:
"WARNING: Adding new packed members is to be done with care"

Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
d660b409dc common.h: remove MIN, MAX, MIN3, MAX3 macros
Now MIN, MAX, MIN3, MAX are not used.
Going forward, use min, max, min3, max3.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24 18:30:29 -04:00
Jeroen Hofstee
87f13aa00d compiler.h: remove duplicated uninitialized_var
Since clang has a different definition for uninitialized_var
it will complain that it is redefined in include/compiler.h.
Since these are already defined in linux/compiler.h just remove
this instance.

Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
97d5e9d149 linker_lists: fix comment
The section name and the C variable name seem to be opposite.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
64147e564c kconfig: remove config_cmd_defaults.h
Now config_cmd_defaults.h is empty so it can be deleted safely.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
1d5c20154f kconfig: move CONFIG_CMD_IMPORTENV to Kconfig
Since CONFIG_CMD_IMPORTENV is defined in config_cmd_defaults.h,
it should be enabled for all the boards except bf506f-ezkit
that undefs it explicitely.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:29 -04:00
Masahiro Yamada
726ac8e4c5 kconfig: move CONFIG_CMD_GO to Kconfig
Since CONFIG_CMD_GO is defined in config_cmd_defaults.h
(and no board undefs it its own header), it can be moved to
Kconfig with the default value "y".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Masahiro Yamada
cccee18918 kconfig: move CONFIG_CMD_EXPORTENV to Kconfig
Since CONFIG_CMD_EXPORTENV is defined in config_cmd_defaults.h,
it should be enabled for all the boards except bf506f-ezkit
that undefs it explicitely.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Masahiro Yamada
ca05ee9d43 kconfig: move CONFIG_CMD_CRC32 to Kconfig
Since CONFIG_CMD_CRC32 is defined in config_cmd_defaults.h,
it is enabled for all the boards except the ones undefining it
explicitly:
  kwb
  tseries_mmc
  tseries_nand
  tseries_spi
  vct_platinum_onenand_small
  vct_platinum_small
  vct_platinumavc_onenand_small
  vct_platinumavc_small
  vct_premium_onenand_small
  vct_premium_small

The default value of this config option should be "y" and
"# CONFIG_CMD_CRC32 is not set" should be added for those exceptions.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Masahiro Yamada
dba1697057 kconfig: move CONFIG_CMD_BOOTM to Kconfig
CONFIG_CMD_BOOTM is defined in config_cmd_defaults.h
which is forcebly included from each board.
So, the default value of "config CMD_BOOTM" should be "y".

For some boards undefining it (bf506f-ezkit, controlcenterd_TRAILBLA,
controlcenterd_TRAILBLAZER_DEVELOP, controlcenterd_TRAILBLAZER),
"# CONFIG_CMD_BOOTM is not set" should be added to their defconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Masahiro Yamada
b0928da648 kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
If this option is enabled, the objects under lib/ directory
are compiled with speed optimization, not size optimization.
(Currently, only used by some Blackfin boards.)

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Hans de Goede
a03bdaa140 config_distro_bootcmd: Run 'scsi scan' before trying scsi disks
Scsi disks need to be probed before we try to access them, otherwise all
accesses fail with: ** Bad device size - scsi 0 **.

Reported-by: Karsten Merker <merker@debian.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Karsten Merker <merker@debian.org>
2014-09-24 18:30:28 -04:00
Steve Rae
c0aebb3382 usb/gadget: fastboot: add eMMC support for flash command
- add support for 'fastboot flash' command for eMMC devices

Signed-off-by: Steve Rae <srae@broadcom.com>
2014-09-24 18:30:27 -04:00
Shaveta Leekha
1de271b487 B4860QDS: Enable mac command support
One of the I2C EEPROM is used to store/save and edit mac
addresses of ports.
this patch add required CONFIG to support the same

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
2014-09-24 13:10:06 -07:00
Shaveta Leekha
38e0e15372 powerpc/b4860: Updated default hwconfig to enable only cpc2
CPC1 is not being enabled by default as powerpc is supposed to
use only CPC2. Though by editing hwconfig en_cpc option,
CPC1 can also be enabled.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-24 13:07:08 -07:00
vijay rai
363fb32aca powerpc/t104xrdb: Add T1042RDB board support
T1042RDB is a Freescale reference board that hosts the T1042 SoC
(and variants). The board is similar to T1040RDB, T1042 is a reduced
personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).

T1042RDB is configured with serdes protocol 0x86 which can support
following interfaces
- 2 RGMII's on DTSEC4, DTSEC5
- 1 SGMII on DTSEC3
DTSEC1, DTSEC2 are not connected on board.

This Patch
- add T1042RDB support
- updates README file for T1042RDB details and update commands for switching
  to alternate banks from vBank0 to vBank4 and vice versa

This patch also does minor clean ups for fdt defines for T1042RDB and
T1042RDB_PI board

Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-09-24 13:02:03 -07:00