Some devices need to inject extra code into the Differentiated System
Descriptor Table (DSDT). Add a method to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct one typo in inject_dsdt() comments]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Call the new core function to write the SSDT. This is made up of fragments
generated by devices that have the fill_ssdt() method.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a /chosen property to control the order in which the data appears
in the SSDT. This allows matching up U-Boot's output from a dump of the
known-good data obtained from within Linux.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It is useful to be able to control the order of data written to the SSDT
so that we can compare the output against known-good kernel dumps.
Add code to record each item that is added along with the device that
added it. That allows us to reorder things later if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Put this table before MCFG so that it matches the order that coreboot uses
when passing tables to Linux. This is a cosmetic change since the order of
the tables does not otherwise matter.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some devices need to generate code for the Secondary System Descriptor
Table (SSDT). Add a method to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a way for devices to enable and disable themselves using ACPI code
that updates GPIOs. This takes several timing parameters and supports
enable, reset and stop.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Power to some devices is controlled by GPIOs. Add a way to generate ACPI
code to enable and disable a GPIO so that this can be handled within an
ACPI method.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
These are used in ACPI to disable power to various pats of the system when
in sleep. Add a way to create a power resource, with the caller finishing
off the details.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add more functions to handle some miscellaneous ACPI opcodes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some drivers in Linux support both device tree and ACPI. U-Boot itself
uses Linux device-tree bindings for its own configuration but does not use
ACPI.
It is convenient to copy these values over to the ACPI DP table for
passing to linux. Add some convenience functions to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Allowing writing out a reference to a GPIO within the ACPI output. This
can be used by ACPI code to access a GPIO at runtime.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
More complex device properties can be provided to drivers via a
device-specific data (_DSD) object.
To create this we need to build it up in a separate data structure and
then generate the ACPI code, due to its recursive nature.
Add an implementation of this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
ACPI supports writing a UUID in a special format. Add a function to handle
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
ACPI supports storing names which are made up of multiple path components.
Several special cases are supported. Add a function to emit a name.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
ACPI supports storing a simple null-terminated string. Add support for
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
ACPI supports storing integers in various ways. Add a function to handle
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
A package collects together several elements. Add an easy way of writing
a package header and updating its length later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
It is convenient to write a length value for preceding a block of data.
Of course the length is not known or is hard to calculate a priori. So add
a way to mark the start on a stack, so the length can be updated when
known.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a function to write a SPI descriptor to the generated ACPI code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a function to write a GPIO descriptor to the generated ACPI code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Some devices use interrupts but some use GPIOs. Since these are fully
specified in the device tree we can automatically produce the correct ACPI
descriptor for a device.
Add a function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a function to write a GPIO descriptor to the generated ACPI code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: Drop comment about the type always being ACPI_GPIO_TYPE_IO]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Add support for output of strings and streams of bytes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When generating ACPI tables we need to convert GPIOs in U-Boot to the ACPI
structures required by ACPI. This is a SoC-specific conversion and cannot
be handled by generic code, so add a new GPIO method to do the conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a function to write an interrupt descriptor to the generated ACPI
code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a new file to handle generating ACPI code programatically. This is
used when information must be dynamically added to the tables, e.g. the
SSDT.
Initial support is just for writing simple values. Also add a 'base' value
so that the table can be freed. This likely doesn't happen in normal code,
but is nice to do in tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
When generating ACPI tables we need to convert IRQs in U-Boot to the ACPI
structures required by ACPI. This is a SoC-specific conversion and cannot
be handled by generic code, so add a new IRQ method to do the conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
At present U-Boot does not support the different ACPI status values, but
it is best to put this logic in a central place. Add a function to get the
device status.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add a function to build up the ACPI path for a device and another for its
scope.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This always has a fixed ACPI name so add it as a driver function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With DDR4, Intel SOCs take quite a long time to init their memory. During
this time, if the user is watching, it looks like SPL has hung. Add a
message in this case.
This works by adding a return code to fspm_update_config() that indicates
whether MRC data was found and a new property to the device tree.
Also add one more debug message while starting.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
At present this enables a few arch-specific members of the global_data
struct which are otherwise not part of the struct. As a result we have to
use #ifdef in various places.
The cost of always having these in the struct is small. Adjust things so
that we can use compile-time code instead of #ifdefs.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Enable this feature on chromebook_coral to speed up the display.
With this change, the time taken to print the environment to the display
without CONFIG_CONSOLE_SCROLL_LINES is reduced from 1830ms to 62ms.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The current get_timer_us() uses 64-bit arithmetic on 32-bit machines.
When implementing microsecond-level timeouts, 32-bits is plenty. Add a
new function that uses an unsigned long. On 64-bit machines this is
still 64-bit, but this doesn't introduce a penalty. On 32-bit machines
it is more efficient.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Currently it is possible to select the P2SB driver without selecting the
P2SB uclass, which can't work. Fix this by adding a "depends on" in
Kconfig.
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
In Intel's documentation the term P2SB stands for "Primary to Sideband
Bridge".
Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Improvements for the UEFI subsystem include:
* support for read-only TEE-backed variables
* allow to compile PK, KEK, db, dbx fixed values into U-Boot
* bug fixes
Python testing related changes comprise:
* enable 'bootefi hello' for better test coverage
* remove SKIP messages in UEFI Python tests
The fitupd command is dropped.
Build errors for the lsblk command are fixed.
-----BEGIN PGP SIGNATURE-----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=y4Dr
-----END PGP SIGNATURE-----
Merge tag 'efi-2020-10-rc1-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2020-10-rc1 (4)
Improvements for the UEFI subsystem include:
* support for read-only TEE-backed variables
* allow to compile PK, KEK, db, dbx fixed values into U-Boot
* bug fixes
Python testing related changes comprise:
* enable 'bootefi hello' for better test coverage
* remove SKIP messages in UEFI Python tests
The fitupd command is dropped.
Build errors for the lsblk command are fixed.
Currently default output of 'printenv -e' is restricted to variables with
GUID EFI_GLOBAL_VARIABLE. This excludes db and dbx. As the number of
variables is small there is no need for this restriction.
If no GUID is provided, print all matching variables irrespective of GUID.
Always show the numeric value of the GUID.
If the GUID provided to 'setenv -e' is invalid, return CMD_RET_USAGE.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Include a file with the initial values for non-volatile UEFI variables
into the U-Boot binary. If this variable is set, changes to variable PK
will not be allowed.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
To determine if a varible is on the of the authentication variables
PK, KEK, db, dbx we have to check both the name and the GUID.
Provide a function converting the variable-name/guid pair to an enum and
use it consistently.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The file based and the OP-TEE based UEFI variable store are mutually
exclusive. Define them as choice options in Kconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Some distributions provide UEFI binaries like Shim that have been signed
using a Microsoft certificate. Provide the download paths for the public
keys.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Update the UEFI secure state when variable 'PK' is updated in the TEE
variables implementation.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
When using secure boot functions needed both for file and TEE based UEFI
variables have to be moved to the common code module efi_var_common.c.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
A previous commit adds support for displaying variables RO flag.
Let's add it on the TEE backed variable storage as well.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Skip messages should only be written if the setup is not suitable for
testing.
If DHCP is enabled, we should not write a skip message if no static network
configuration is supplied.
Likewise if a static network configuration is supplied, we should not write
a skip message if DHCP is not enabled.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
In our Python tests we want to run 'bootefi hello'. Enable it by default
when compiling with CMD_BOOTEFI_SELFTEST.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
