mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
ARM: rmobile: Update E2 Silk
The E2 Silk port was broken since some time. This patch updates
the E2 Silk port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
NOTE: The port is missing support for I2C1 for DA9063 reset, since the
I2C driver needs to be converted to DM and DT probing. That's not
an issue for this patch though, since the reset was broken on Silk
since forever.
This commit is contained in:
Marek Vasut
parent
1ddbcf46bf
commit
f7aa3cd4a8
7 changed files with 563 additions and 183 deletions
|
|
@ -8,3 +8,7 @@
|
|||
|
||||
#include "r8a7794-silk.dts"
|
||||
#include "r8a7794-u-boot.dtsi"
|
||||
|
||||
&scif2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -68,6 +68,9 @@ config TARGET_SILK
|
|||
bool "Silk board"
|
||||
select DM
|
||||
select DM_SERIAL
|
||||
select SUPPORT_SPL
|
||||
select USE_TINY_PRINTF
|
||||
select SPL_TINY_MEMSET
|
||||
|
||||
config TARGET_PORTER
|
||||
bool "Porter board"
|
||||
|
|
|
|||
|
|
@ -7,4 +7,8 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
#
|
||||
|
||||
obj-y := silk.o qos.o ../rcar-common/common.o
|
||||
ifdef CONFIG_SPL_BUILD
|
||||
obj-y := silk_spl.o
|
||||
else
|
||||
obj-y := silk.o qos.o
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -30,7 +30,6 @@
|
|||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define CLK2MHZ(clk) (clk / 1000 / 1000)
|
||||
void s_init(void)
|
||||
{
|
||||
struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
|
||||
|
|
@ -44,150 +43,65 @@ void s_init(void)
|
|||
qos_init();
|
||||
}
|
||||
|
||||
#define TMU0_MSTP125 (1 << 25)
|
||||
#define SCIF2_MSTP719 (1 << 19)
|
||||
#define ETHER_MSTP813 (1 << 13)
|
||||
#define IIC1_MSTP323 (1 << 23)
|
||||
#define MMC0_MSTP315 (1 << 15)
|
||||
#define SDHI1_MSTP312 (1 << 12)
|
||||
#define TMU0_MSTP125 BIT(25)
|
||||
#define MMC0_MSTP315 BIT(15)
|
||||
|
||||
#define SD1CKCR 0xE6150078
|
||||
#define SD1_97500KHZ 0x7
|
||||
#define SD_97500KHZ 0x7
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/* TMU */
|
||||
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
|
||||
|
||||
/* SCIF2 */
|
||||
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
|
||||
/* Set SD1 to the 97.5MHz */
|
||||
writel(SD_97500KHZ, SD1CKCR);
|
||||
|
||||
/* ETHER */
|
||||
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
|
||||
|
||||
/* IIC1 / sh-i2c ch1 */
|
||||
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
|
||||
|
||||
#ifdef CONFIG_SH_MMCIF
|
||||
/* MMC */
|
||||
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SH_SDHI
|
||||
/* SDHI1 */
|
||||
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI1_MSTP312);
|
||||
|
||||
/*
|
||||
* Set SD1 to the 97.5MHz
|
||||
*/
|
||||
writel(SD1_97500KHZ, SD1CKCR);
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* LSI pin pull-up control */
|
||||
#define PUPR3 0xe606010C
|
||||
#define PUPR3_ETH 0x006FF800
|
||||
#define PUPR1 0xe6060104
|
||||
#define PUPR1_DREQ0_N (1 << 20)
|
||||
#define ETHERNET_PHY_RESET 56 /* GPIO 1 24 */
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
/* Init PFC controller */
|
||||
r8a7794_pinmux_init();
|
||||
|
||||
/* Ether Enable */
|
||||
gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
|
||||
gpio_request(GPIO_FN_ETH_RX_ER, NULL);
|
||||
gpio_request(GPIO_FN_ETH_RXD0, NULL);
|
||||
gpio_request(GPIO_FN_ETH_RXD1, NULL);
|
||||
gpio_request(GPIO_FN_ETH_LINK, NULL);
|
||||
gpio_request(GPIO_FN_ETH_REFCLK, NULL);
|
||||
gpio_request(GPIO_FN_ETH_MDIO, NULL);
|
||||
gpio_request(GPIO_FN_ETH_TXD1, NULL);
|
||||
gpio_request(GPIO_FN_ETH_TX_EN, NULL);
|
||||
gpio_request(GPIO_FN_ETH_MAGIC, NULL);
|
||||
gpio_request(GPIO_FN_ETH_TXD0, NULL);
|
||||
gpio_request(GPIO_FN_ETH_MDC, NULL);
|
||||
gpio_request(GPIO_FN_IRQ8, NULL);
|
||||
|
||||
/* PHY reset */
|
||||
mstp_clrbits_le32(PUPR3, PUPR3, PUPR3_ETH);
|
||||
gpio_request(GPIO_GP_1_24, NULL);
|
||||
mstp_clrbits_le32(PUPR1, PUPR1, PUPR1_DREQ0_N);
|
||||
|
||||
gpio_direction_output(GPIO_GP_1_24, 0);
|
||||
/* Force ethernet PHY out of reset */
|
||||
gpio_request(ETHERNET_PHY_RESET, "phy_reset");
|
||||
gpio_direction_output(ETHERNET_PHY_RESET, 0);
|
||||
mdelay(20);
|
||||
gpio_set_value(GPIO_GP_1_24, 1);
|
||||
gpio_direction_output(ETHERNET_PHY_RESET, 1);
|
||||
udelay(1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define CXR24 0xEE7003C0 /* MAC address high register */
|
||||
#define CXR25 0xEE7003C8 /* MAC address low register */
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
#ifdef CONFIG_SH_ETHER
|
||||
int ret = -ENODEV;
|
||||
u32 val;
|
||||
unsigned char enetaddr[6];
|
||||
|
||||
ret = sh_eth_initialize(bis);
|
||||
if (!eth_env_get_enetaddr("ethaddr", enetaddr))
|
||||
return ret;
|
||||
|
||||
/* Set Mac address */
|
||||
val = enetaddr[0] << 24 | enetaddr[1] << 16 |
|
||||
enetaddr[2] << 8 | enetaddr[3];
|
||||
writel(val, CXR24);
|
||||
|
||||
val = enetaddr[4] << 8 | enetaddr[5];
|
||||
writel(val, CXR25);
|
||||
|
||||
return ret;
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
int ret = -ENODEV;
|
||||
|
||||
#ifdef CONFIG_SH_MMCIF
|
||||
/* MMC0 */
|
||||
gpio_request(GPIO_GP_4_31, NULL);
|
||||
gpio_direction_output(GPIO_GP_4_31, 1);
|
||||
|
||||
ret = mmcif_mmc_init();
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SH_SDHI
|
||||
gpio_request(GPIO_FN_SD1_DATA0, NULL);
|
||||
gpio_request(GPIO_FN_SD1_DATA1, NULL);
|
||||
gpio_request(GPIO_FN_SD1_DATA2, NULL);
|
||||
gpio_request(GPIO_FN_SD1_DATA3, NULL);
|
||||
gpio_request(GPIO_FN_SD1_CLK, NULL);
|
||||
gpio_request(GPIO_FN_SD1_CMD, NULL);
|
||||
gpio_request(GPIO_FN_SD1_CD, NULL);
|
||||
|
||||
/* SDHI 1 */
|
||||
gpio_request(GPIO_GP_4_26, NULL);
|
||||
gpio_request(GPIO_GP_4_29, NULL);
|
||||
gpio_direction_output(GPIO_GP_4_26, 1);
|
||||
gpio_direction_output(GPIO_GP_4_29, 1);
|
||||
|
||||
ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
|
||||
#endif
|
||||
return ret;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
|
||||
if (fdtdec_setup_memory_size() != 0)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init_banksize(void)
|
||||
{
|
||||
fdtdec_setup_memory_banksize();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* porter has KSZ8041RNLI */
|
||||
#define PHY_CONTROL1 0x1E
|
||||
#define PHY_LED_MODE 0xC0000
|
||||
#define PHY_LED_MODE_ACK 0x4000
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1);
|
||||
ret &= ~PHY_LED_MODE;
|
||||
ret |= PHY_LED_MODE_ACK;
|
||||
ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -198,22 +112,38 @@ const struct rmobile_sysinfo sysinfo = {
|
|||
|
||||
void reset_cpu(ulong addr)
|
||||
{
|
||||
u8 val;
|
||||
struct udevice *dev;
|
||||
const u8 pmic_bus = 1;
|
||||
const u8 pmic_addr = 0x58;
|
||||
u8 data;
|
||||
int ret;
|
||||
|
||||
i2c_set_bus_num(1); /* PowerIC connected to ch1 */
|
||||
i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
|
||||
val |= 0x02;
|
||||
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
|
||||
ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev);
|
||||
if (ret)
|
||||
hang();
|
||||
|
||||
ret = dm_i2c_read(dev, 0x13, &data, 1);
|
||||
if (ret)
|
||||
hang();
|
||||
|
||||
data |= BIT(1);
|
||||
|
||||
ret = dm_i2c_write(dev, 0x13, &data, 1);
|
||||
if (ret)
|
||||
hang();
|
||||
}
|
||||
|
||||
static const struct sh_serial_platdata serial_platdata = {
|
||||
.base = SCIF2_BASE,
|
||||
.type = PORT_SCIF,
|
||||
.clk = 14745600,
|
||||
.clk_mode = EXT_CLK,
|
||||
};
|
||||
enum env_location env_get_location(enum env_operation op, int prio)
|
||||
{
|
||||
const u32 load_magic = 0xb33fc0de;
|
||||
|
||||
U_BOOT_DEVICE(silk_serials) = {
|
||||
.name = "serial_sh",
|
||||
.platdata = &serial_platdata,
|
||||
};
|
||||
/* Block environment access if loaded using JTAG */
|
||||
if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) &&
|
||||
(op != ENVOP_INIT))
|
||||
return ENVL_UNKNOWN;
|
||||
|
||||
if (prio)
|
||||
return ENVL_UNKNOWN;
|
||||
|
||||
return ENVL_SPI_FLASH;
|
||||
}
|
||||
|
|
|
|||
425
board/renesas/silk/silk_spl.c
Normal file
425
board/renesas/silk/silk_spl.c
Normal file
|
|
@ -0,0 +1,425 @@
|
|||
/*
|
||||
* board/renesas/silk/silk_spl.c
|
||||
*
|
||||
* Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <malloc.h>
|
||||
#include <dm/platform_data/serial_sh.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/io.h>
|
||||
#include <linux/errno.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/arch/rmobile.h>
|
||||
#include <asm/arch/rcar-mstp.h>
|
||||
|
||||
#include <spl.h>
|
||||
|
||||
#define TMU0_MSTP125 BIT(25)
|
||||
#define SCIF2_MSTP719 BIT(19)
|
||||
#define QSPI_MSTP917 BIT(17)
|
||||
|
||||
#define SD1CKCR 0xE6150078
|
||||
#define SD_97500KHZ 0x7
|
||||
|
||||
struct reg_config {
|
||||
u16 off;
|
||||
u32 val;
|
||||
};
|
||||
|
||||
static void dbsc_wait(u16 reg)
|
||||
{
|
||||
static const u32 dbsc3_0_base = DBSC3_0_BASE;
|
||||
|
||||
while (!(readl(dbsc3_0_base + reg) & BIT(0)))
|
||||
;
|
||||
}
|
||||
|
||||
static void spl_init_sys(void)
|
||||
{
|
||||
u32 r0 = 0;
|
||||
|
||||
writel(0xa5a5a500, 0xe6020004);
|
||||
writel(0xa5a5a500, 0xe6030004);
|
||||
|
||||
asm volatile(
|
||||
/* ICIALLU - Invalidate I$ to PoU */
|
||||
"mcr 15, 0, %0, cr7, cr5, 0 \n"
|
||||
/* BPIALL - Invalidate branch predictors */
|
||||
"mcr 15, 0, %0, cr7, cr5, 6 \n"
|
||||
/* Set SCTLR[IZ] */
|
||||
"mrc 15, 0, %0, cr1, cr0, 0 \n"
|
||||
"orr %0, #0x1800 \n"
|
||||
"mcr 15, 0, %0, cr1, cr0, 0 \n"
|
||||
"isb sy \n"
|
||||
:"=r"(r0));
|
||||
}
|
||||
|
||||
static void spl_init_pfc(void)
|
||||
{
|
||||
static const struct reg_config pfc_with_unlock[] = {
|
||||
{ 0x0090, 0x00018040 },
|
||||
{ 0x0094, 0x00000000 },
|
||||
{ 0x0098, 0x00000000 },
|
||||
{ 0x0020, 0x94000000 },
|
||||
{ 0x0024, 0x00000006 },
|
||||
{ 0x0028, 0x40000000 },
|
||||
{ 0x002c, 0x00000155 },
|
||||
{ 0x0030, 0x00000002 },
|
||||
{ 0x0034, 0x00000000 },
|
||||
{ 0x0038, 0x00000000 },
|
||||
{ 0x003c, 0x00000000 },
|
||||
{ 0x0040, 0x60000000 },
|
||||
{ 0x0044, 0x36dab6db },
|
||||
{ 0x0048, 0x926da012 },
|
||||
{ 0x004c, 0x0008c383 },
|
||||
{ 0x0050, 0x00000000 },
|
||||
{ 0x0054, 0x00000140 },
|
||||
{ 0x0004, 0xffffffff },
|
||||
{ 0x0008, 0x00ec3fff },
|
||||
{ 0x000c, 0x5bffffff },
|
||||
{ 0x0010, 0x01bfe1ff },
|
||||
{ 0x0014, 0x5bffffff },
|
||||
{ 0x0018, 0x0f4b200f },
|
||||
{ 0x001c, 0x03ffffff },
|
||||
};
|
||||
|
||||
static const struct reg_config pfc_without_unlock[] = {
|
||||
{ 0x0100, 0x00000000 },
|
||||
{ 0x0104, 0x4203fdf0 },
|
||||
{ 0x0108, 0x00000000 },
|
||||
{ 0x010c, 0x159007ff },
|
||||
{ 0x0110, 0x80000000 },
|
||||
{ 0x0114, 0x00de481f },
|
||||
{ 0x0118, 0x00000000 },
|
||||
};
|
||||
|
||||
static const struct reg_config pfc_with_unlock2[] = {
|
||||
{ 0x0060, 0xffffffff },
|
||||
{ 0x0064, 0xfffff000 },
|
||||
{ 0x0068, 0x55555500 },
|
||||
{ 0x006c, 0xffffff00 },
|
||||
{ 0x0070, 0x00000000 },
|
||||
};
|
||||
|
||||
static const u32 pfc_base = 0xe6060000;
|
||||
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) {
|
||||
writel(~pfc_with_unlock[i].val, pfc_base);
|
||||
writel(pfc_with_unlock[i].val,
|
||||
pfc_base | pfc_with_unlock[i].off);
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++)
|
||||
writel(pfc_without_unlock[i].val,
|
||||
pfc_base | pfc_without_unlock[i].off);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(pfc_with_unlock2); i++) {
|
||||
writel(~pfc_with_unlock2[i].val, pfc_base);
|
||||
writel(pfc_with_unlock2[i].val,
|
||||
pfc_base | pfc_with_unlock2[i].off);
|
||||
}
|
||||
}
|
||||
|
||||
static void spl_init_gpio(void)
|
||||
{
|
||||
static const u16 gpio_offs[] = {
|
||||
0x1000, 0x2000, 0x3000, 0x4000
|
||||
};
|
||||
|
||||
static const struct reg_config gpio_set[] = {
|
||||
{ 0x2000, 0x24000000 },
|
||||
{ 0x4000, 0xa4000000 },
|
||||
{ 0x5000, 0x0084c000 },
|
||||
};
|
||||
|
||||
static const struct reg_config gpio_clr[] = {
|
||||
{ 0x1000, 0x01000000 },
|
||||
{ 0x2000, 0x24000000 },
|
||||
{ 0x3000, 0x00000000 },
|
||||
{ 0x4000, 0xa4000000 },
|
||||
{ 0x5000, 0x00044380 },
|
||||
};
|
||||
|
||||
static const u32 gpio_base = 0xe6050000;
|
||||
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
|
||||
writel(0, gpio_base | 0x20 | gpio_offs[i]);
|
||||
writel(BIT(23), gpio_base | 0x5020);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(gpio_offs); i++)
|
||||
writel(0, gpio_base | 0x00 | gpio_offs[i]);
|
||||
writel(BIT(23), gpio_base | 0x5000);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(gpio_set); i++)
|
||||
writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(gpio_clr); i++)
|
||||
writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off);
|
||||
}
|
||||
|
||||
static void spl_init_lbsc(void)
|
||||
{
|
||||
static const struct reg_config lbsc_config[] = {
|
||||
{ 0x00, 0x00000020 },
|
||||
{ 0x08, 0x00002020 },
|
||||
{ 0x30, 0x2a103320 },
|
||||
{ 0x38, 0xff70ff70 },
|
||||
};
|
||||
|
||||
static const u16 lbsc_offs[] = {
|
||||
0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8
|
||||
};
|
||||
|
||||
static const u32 lbsc_base = 0xfec00200;
|
||||
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) {
|
||||
writel(lbsc_config[i].val,
|
||||
lbsc_base | lbsc_config[i].off);
|
||||
writel(lbsc_config[i].val,
|
||||
lbsc_base | (lbsc_config[i].off + 4));
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++)
|
||||
writel(0, lbsc_base | lbsc_offs[i]);
|
||||
}
|
||||
|
||||
static void spl_init_dbsc(void)
|
||||
{
|
||||
static const struct reg_config dbsc_config1[] = {
|
||||
{ 0x0018, 0x21000000 },
|
||||
{ 0x0018, 0x11000000 },
|
||||
{ 0x0018, 0x10000000 },
|
||||
{ 0x0280, 0x0000a55a },
|
||||
{ 0x0290, 0x00000001 },
|
||||
{ 0x02a0, 0x80000000 },
|
||||
{ 0x0290, 0x00000004 },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config2[] = {
|
||||
{ 0x0290, 0x00000006 },
|
||||
{ 0x02a0, 0x0005c000 },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config3r2[] = {
|
||||
{ 0x0290, 0x0000000f },
|
||||
{ 0x02a0, 0x00181224 },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config4[] = {
|
||||
{ 0x0290, 0x00000010 },
|
||||
{ 0x02a0, 0xf004649b },
|
||||
{ 0x0290, 0x00000061 },
|
||||
{ 0x02a0, 0x0000006d },
|
||||
{ 0x0290, 0x00000001 },
|
||||
{ 0x02a0, 0x00000073 },
|
||||
{ 0x0020, 0x00000007 },
|
||||
{ 0x0024, 0x0f030a02 },
|
||||
{ 0x0030, 0x00000001 },
|
||||
{ 0x00b0, 0x00000000 },
|
||||
{ 0x0040, 0x00000009 },
|
||||
{ 0x0044, 0x00000007 },
|
||||
{ 0x0048, 0x00000000 },
|
||||
{ 0x0050, 0x00000009 },
|
||||
{ 0x0054, 0x000a0009 },
|
||||
{ 0x0058, 0x00000021 },
|
||||
{ 0x005c, 0x00000018 },
|
||||
{ 0x0060, 0x00000005 },
|
||||
{ 0x0064, 0x00000020 },
|
||||
{ 0x0068, 0x00000007 },
|
||||
{ 0x006c, 0x0000000a },
|
||||
{ 0x0070, 0x00000009 },
|
||||
{ 0x0074, 0x00000010 },
|
||||
{ 0x0078, 0x000000ae },
|
||||
{ 0x007c, 0x00140005 },
|
||||
{ 0x0080, 0x00050004 },
|
||||
{ 0x0084, 0x50213005 },
|
||||
{ 0x0088, 0x000c0000 },
|
||||
{ 0x008c, 0x00000200 },
|
||||
{ 0x0090, 0x00000040 },
|
||||
{ 0x0100, 0x00000001 },
|
||||
{ 0x00c0, 0x00020001 },
|
||||
{ 0x00c8, 0x20042004 },
|
||||
{ 0x0380, 0x00020003 },
|
||||
{ 0x0390, 0x0000001f },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config5[] = {
|
||||
{ 0x0244, 0x00000011 },
|
||||
{ 0x0290, 0x00000003 },
|
||||
{ 0x02a0, 0x0300c4e1 },
|
||||
{ 0x0290, 0x00000023 },
|
||||
{ 0x02a0, 0x00fcb6d0 },
|
||||
{ 0x0290, 0x00000011 },
|
||||
{ 0x02a0, 0x1000040b },
|
||||
{ 0x0290, 0x00000012 },
|
||||
{ 0x02a0, 0x85589955 },
|
||||
{ 0x0290, 0x00000013 },
|
||||
{ 0x02a0, 0x1a852400 },
|
||||
{ 0x0290, 0x00000014 },
|
||||
{ 0x02a0, 0x300210b4 },
|
||||
{ 0x0290, 0x00000015 },
|
||||
{ 0x02a0, 0x00000b50 },
|
||||
{ 0x0290, 0x00000016 },
|
||||
{ 0x02a0, 0x00000006 },
|
||||
{ 0x0290, 0x00000017 },
|
||||
{ 0x02a0, 0x00000010 },
|
||||
{ 0x0290, 0x0000001a },
|
||||
{ 0x02a0, 0x910035c7 },
|
||||
{ 0x0290, 0x00000004 },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config6[] = {
|
||||
{ 0x0290, 0x00000001 },
|
||||
{ 0x02a0, 0x00000181 },
|
||||
{ 0x0018, 0x11000000 },
|
||||
{ 0x0290, 0x00000004 },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config7[] = {
|
||||
{ 0x0290, 0x00000001 },
|
||||
{ 0x02a0, 0x0000fe01 },
|
||||
{ 0x0304, 0x00000000 },
|
||||
{ 0x00f4, 0x01004c20 },
|
||||
{ 0x00f8, 0x012c00be },
|
||||
{ 0x00e0, 0x00000140 },
|
||||
{ 0x00e4, 0x00081450 },
|
||||
{ 0x00e8, 0x00010000 },
|
||||
{ 0x0290, 0x00000004 },
|
||||
};
|
||||
|
||||
static const struct reg_config dbsc_config8[] = {
|
||||
{ 0x0014, 0x00000001 },
|
||||
{ 0x0290, 0x00000010 },
|
||||
{ 0x02a0, 0xf00464db },
|
||||
{ 0x0010, 0x00000001 },
|
||||
{ 0x0280, 0x00000000 },
|
||||
};
|
||||
|
||||
static const u32 dbsc3_0_base = DBSC3_0_BASE;
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++)
|
||||
writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off);
|
||||
|
||||
dbsc_wait(0x2a0);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config2); i++)
|
||||
writel(dbsc_config2[i].val, dbsc3_0_base | dbsc_config2[i].off);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config3r2); i++) {
|
||||
writel(dbsc_config3r2[i].val,
|
||||
dbsc3_0_base | dbsc_config3r2[i].off);
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++)
|
||||
writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off);
|
||||
|
||||
dbsc_wait(0x240);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++)
|
||||
writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off);
|
||||
|
||||
dbsc_wait(0x2a0);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++)
|
||||
writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off);
|
||||
|
||||
dbsc_wait(0x2a0);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++)
|
||||
writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off);
|
||||
|
||||
dbsc_wait(0x2a0);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++)
|
||||
writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off);
|
||||
|
||||
}
|
||||
|
||||
static void spl_init_qspi(void)
|
||||
{
|
||||
mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917);
|
||||
|
||||
static const u32 qspi_base = 0xe6b10000;
|
||||
|
||||
writeb(0x08, qspi_base + 0x00);
|
||||
writeb(0x00, qspi_base + 0x01);
|
||||
writeb(0x06, qspi_base + 0x02);
|
||||
writeb(0x01, qspi_base + 0x0a);
|
||||
writeb(0x00, qspi_base + 0x0b);
|
||||
writeb(0x00, qspi_base + 0x0c);
|
||||
writeb(0x00, qspi_base + 0x0d);
|
||||
writeb(0x00, qspi_base + 0x0e);
|
||||
|
||||
writew(0xe080, qspi_base + 0x10);
|
||||
|
||||
writeb(0xc0, qspi_base + 0x18);
|
||||
writeb(0x00, qspi_base + 0x18);
|
||||
writeb(0x00, qspi_base + 0x08);
|
||||
writeb(0x48, qspi_base + 0x00);
|
||||
}
|
||||
|
||||
void board_init_f(ulong dummy)
|
||||
{
|
||||
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
|
||||
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
|
||||
|
||||
/* Set SD1 to the 97.5MHz */
|
||||
writel(SD_97500KHZ, SD1CKCR);
|
||||
|
||||
spl_init_sys();
|
||||
spl_init_pfc();
|
||||
spl_init_gpio();
|
||||
spl_init_lbsc();
|
||||
spl_init_dbsc();
|
||||
spl_init_qspi();
|
||||
}
|
||||
|
||||
void spl_board_init(void)
|
||||
{
|
||||
/* UART clocks enabled and gd valid - init serial console */
|
||||
preloader_console_init();
|
||||
}
|
||||
|
||||
void board_boot_order(u32 *spl_boot_list)
|
||||
{
|
||||
const u32 jtag_magic = 0x1337c0de;
|
||||
const u32 load_magic = 0xb33fc0de;
|
||||
|
||||
/*
|
||||
* If JTAG probe sets special word at 0xe6300020, then it must
|
||||
* put U-Boot into RAM and SPL will start it from RAM.
|
||||
*/
|
||||
if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) {
|
||||
printf("JTAG boot detected!\n");
|
||||
|
||||
while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic)
|
||||
;
|
||||
|
||||
spl_boot_list[0] = BOOT_DEVICE_RAM;
|
||||
spl_boot_list[1] = BOOT_DEVICE_NONE;
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
/* Boot from SPI NOR with YMODEM UART fallback. */
|
||||
spl_boot_list[0] = BOOT_DEVICE_SPI;
|
||||
spl_boot_list[1] = BOOT_DEVICE_UART;
|
||||
spl_boot_list[2] = BOOT_DEVICE_NONE;
|
||||
}
|
||||
|
||||
void reset_cpu(ulong addr)
|
||||
{
|
||||
}
|
||||
|
|
@ -1,17 +1,37 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y
|
||||
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
|
||||
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
||||
CONFIG_ARCH_RMOBILE=y
|
||||
CONFIG_SYS_TEXT_BASE=0xE6304000
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_SYS_TEXT_BASE=0x50000000
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_R8A7794=y
|
||||
CONFIG_TARGET_SILK=y
|
||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="r8a7794-silk-u-boot"
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
|
||||
CONFIG_FIT=y
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_VERSION_VARIABLE=y
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
||||
CONFIG_SPL_RAM_SUPPORT=y
|
||||
CONFIG_SPL_RAM_DEVICE=y
|
||||
CONFIG_SPL_SPI_LOAD=y
|
||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_XIMG is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_SDRAM=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
|
|
@ -19,22 +39,43 @@ CONFIG_CMD_USB=y
|
|||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_EXT2=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_CLK_RENESAS=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_RCAR_GPIO=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_RCAR_IIC=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_SH_MMCIF=y
|
||||
CONFIG_RENESAS_SDHI=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_BAR=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_PHY_MICREL=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_SH_ETHER=y
|
||||
CONFIG_BAUDRATE=38400
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DM_PCI=y
|
||||
CONFIG_PCI_RCAR_GEN2=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCONF=y
|
||||
CONFIG_PINCTRL_PFC=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_SCIF_CONSOLE=y
|
||||
CONFIG_SH_QSPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_PCI=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
|
|
|
|||
|
|
@ -16,12 +16,8 @@
|
|||
|
||||
#include "rcar-gen2-common.h"
|
||||
|
||||
#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
|
||||
#else
|
||||
#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
|
||||
#endif
|
||||
#define STACK_AREA_SIZE 0xC000
|
||||
#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000
|
||||
#define STACK_AREA_SIZE 0x00100000
|
||||
#define LOW_LEVEL_MERAM_STACK \
|
||||
(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
|
||||
|
||||
|
|
@ -49,45 +45,22 @@
|
|||
/* Board Clock */
|
||||
#define RMOBILE_XTAL_CLK 20000000u
|
||||
#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
|
||||
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
|
||||
#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
|
||||
#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
|
||||
#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
|
||||
|
||||
#define CONFIG_SYS_TMU_CLK_DIV 4
|
||||
#define CONFIG_SYS_TMU_CLK_DIV 4
|
||||
|
||||
/* i2c */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_SH
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
|
||||
#define CONFIG_SYS_I2C_SH_SPEED0 400000
|
||||
#define CONFIG_SYS_I2C_SH_SPEED1 400000
|
||||
#define CONFIG_SYS_I2C_SH_SPEED2 400000
|
||||
#define CONFIG_SH_I2C_DATA_HIGH 4
|
||||
#define CONFIG_SH_I2C_DATA_LOW 5
|
||||
#define CONFIG_SH_I2C_CLOCK 10000000
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"fdt_high=0xffffffff\0" \
|
||||
"initrd_high=0xffffffff\0"
|
||||
|
||||
#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_USB_EHCI_RMOBILE
|
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||
|
||||
/* MMCIF */
|
||||
#define CONFIG_SH_MMCIF_ADDR 0xee200000
|
||||
#define CONFIG_SH_MMCIF_CLK 48000000
|
||||
|
||||
/* SDHI */
|
||||
#define CONFIG_SH_SDHI_FREQ 97500000
|
||||
|
||||
/* Module stop status bits */
|
||||
/* INTC-RT */
|
||||
#define CONFIG_SMSTP0_ENA 0x00400000
|
||||
/* MSIF */
|
||||
#define CONFIG_SMSTP2_ENA 0x00002000
|
||||
/* INTC-SYS, IRQC */
|
||||
#define CONFIG_SMSTP4_ENA 0x00000180
|
||||
/* SCIF2 */
|
||||
#define CONFIG_SMSTP7_ENA 0x00080000
|
||||
/* SPL support */
|
||||
#define CONFIG_SPL_TEXT_BASE 0xe6300000
|
||||
#define CONFIG_SPL_STACK 0xe6340000
|
||||
#define CONFIG_SPL_MAX_SIZE 0x4000
|
||||
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#define CONFIG_CONS_SCIF2
|
||||
#define CONFIG_SH_SCIF_CLK_FREQ 65000000
|
||||
#endif
|
||||
|
||||
#endif /* __SILK_H */
|
||||
|
|
|
|||
Loading…
Reference in a new issue