armv8: Add sata support on Layerscape ARMv8 board

Freescale ARM-based Layerscape contains a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds SATA feature on ls2080aqds, ls2080ardb and
ls1043aqds boards.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

arch/arm/cpu/armv8/fsl-layerscape/soc.c

@@ -6,6 +6,8 @@
 
 #include <common.h>
 #include <fsl_ifc.h>
+#include <ahci.h>
+#include <scsi.h>
 #include <asm/arch/soc.h>
 #include <asm/io.h>
 #include <asm/global_data.h>
@@ -157,7 +159,44 @@ void fsl_lsch3_early_init_f(void)
 	erratum_a008336();
 }
 
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int sata_init(void)
+{
+	struct ccsr_ahci __iomem *ccsr_ahci;
+
+	ccsr_ahci  = (void *)CONFIG_SYS_SATA2;
+	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+	ccsr_ahci  = (void *)CONFIG_SYS_SATA1;
+	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+	ahci_init((void __iomem *)CONFIG_SYS_SATA1);
+	scsi_scan(0);
+
+	return 0;
+}
+#endif
+
 #elif defined(CONFIG_LS1043A)
+#ifdef CONFIG_SCSI_AHCI_PLAT
+int sata_init(void)
+{
+	struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
+
+	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY_2_CFG);
+	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY_3_CFG);
+	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
+
+	ahci_init((void __iomem *)CONFIG_SYS_SATA);
+	scsi_scan(0);
+
+	return 0;
+}
+#endif
+
 void fsl_lsch2_early_init_f(void)
 {
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -183,6 +222,10 @@ void fsl_lsch2_early_init_f(void)
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
+#ifdef CONFIG_SCSI_AHCI_PLAT
+	sata_init();
+#endif
+
 	return 0;
 }
 #endif

arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h

@@ -69,6 +69,10 @@
 #define TZASC_REGION_ATTRIBUTES_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x110)
 #define TZASC_REGION_ID_ACCESS_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x114)
 
+/* SATA */
+#define AHCI_BASE_ADDR1				(CONFIG_SYS_IMMR + 0x02200000)
+#define AHCI_BASE_ADDR2				(CONFIG_SYS_IMMR + 0x02210000)
+
 /* PCIe */
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)

arch/arm/include/asm/arch-fsl-layerscape/soc.h

@@ -51,6 +51,37 @@ struct cpu_type {
 #define SVR_SOC_VER(svr)	(((svr) >> 8) & SVR_WO_E)
 #define IS_E_PROCESSOR(svr)	(!((svr >> 8) & 0x1))
 
+/* ahci port register default value */
+#define AHCI_PORT_PHY_1_CFG    0xa003fffe
+#define AHCI_PORT_PHY_2_CFG    0x28184d1f
+#define AHCI_PORT_PHY_3_CFG    0x0e081509
+#define AHCI_PORT_TRANS_CFG    0x08000029
+
+/* AHCI (sata) register map */
+struct ccsr_ahci {
+	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
+	u32 pcfg;	/* port config */
+	u32 ppcfg;	/* port phy1 config */
+	u32 pp2c;	/* port phy2 config */
+	u32 pp3c;	/* port phy3 config */
+	u32 pp4c;	/* port phy4 config */
+	u32 pp5c;	/* port phy5 config */
+	u32 axicc;	/* AXI cache control */
+	u32 paxic;	/* port AXI config */
+	u32 axipc;	/* AXI PROT control */
+	u32 ptc;	/* port Trans Config */
+	u32 pts;	/* port Trans Status */
+	u32 plc;	/* port link config */
+	u32 plc1;	/* port link config1 */
+	u32 plc2;	/* port link config2 */
+	u32 pls;	/* port link status */
+	u32 pls1;	/* port link status1 */
+	u32 pcmdc;	/* port CMD config */
+	u32 ppcs;	/* port phy control status */
+	u32 pberr;	/* port 0/1 BIST error */
+	u32 cmds;	/* port 0/1 CMD status error */
+};
+
 #ifdef CONFIG_FSL_LSCH3
 void fsl_lsch3_early_init_f(void);
 #elif defined(CONFIG_FSL_LSCH2)

include/configs/ls1043aqds.h

@@ -88,6 +88,23 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
 #endif
 
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 /*
  * IFC Definitions
  */

include/configs/ls2080aqds.h

@@ -40,6 +40,24 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
 
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
+#define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)

include/configs/ls2080ardb.h

@@ -42,6 +42,24 @@ unsigned long get_board_sys_clk(void);
 #endif
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
 
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
+#define CONFIG_SYS_SATA2			AHCI_BASE_ADDR2
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)