Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-25 14:10:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/rock-pi-4-rk3399_defconfig

79 lines
2 KiB
Text
Raw Normal View History

rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_ARM=y
Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-28 01:18:30 +00:00
CONFIG_SKIP_LOWLEVEL_INIT=y
configs: set CONFIG_COUNTER_FREQUENCY Set CONFIG_COUNTER_FREQUENCY according to COUNTER_FREQUENCY in config header file. Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: Re-run migration]
2022-04-13 09:47:20 +00:00
CONFIG_COUNTER_FREQUENCY=24000000
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_OFFSET=0x3F8000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rock-pi-4b"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_ROCKCHIP_RK3399=y
rockchip: rk3399: add target type for evb based board There are many boards share the board file and device header file with rk3399 evb, add target type MACRO so that it is fixed instead of default to the first target in "RK3399 board select". Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2020-02-19 09:51:07 +00:00
CONFIG_TARGET_EVB_RK3399=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 14:25:31 +00:00
CONFIG_SYS_LOAD_ADDR=0x800800
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_DEBUG_UART=y
rockchip: rock-pi-4: Enable USB Gadget Enable USB gadget for rock-pi-4 boards. This would help to use fastboot by default. Note: Connect the Host USB cable (Port A or C) to rock-pi-4 Upper USB 3.0 port. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:46 +00:00
# CONFIG_ANDROID_BOOT_IMAGE is not set
arm64: dts: rockchip: Add ROCKPi 4A/4B support Rock PI 4 has 3 variants of hardware platforms called RockPI 4A, 4B, and 4C. - Rock PI 4A has no Wif/BT. - Rock PI 4B has AP6256 Wifi/BT, PoE. - Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enable GPIO pin change compared to 4B, 4C So move common nodes, properties into dtsi file and include on respective variant dts files. Use 4B dts into default rock-pi-4 defconfig until we find any solution for dynamic detection of these variants. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-20 18:55:48 +00:00
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4b.dtb"
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_MISC_INIT_R=y
rockchip: rk3399: defconfig: remove SPL raw image support RK3399 SPL only support FIT image for ATF bl31. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-20 03:47:02 +00:00
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 14:11:23 +00:00
CONFIG_TPL=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
rockchip: rock-pi-4: Enable PCI/NVME Enable PCI/NVME for M.2 Slot on RockPI-4 boards. => nvme info Device 0: Vendor: 0x144d Rev: 2B2QEXM7 Prod: S4EUNG0MC10012Y Type: Hard Disk Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:45 +00:00
CONFIG_CMD_PCI=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
rockchip: rock-pi-4: Enable USB3 Host Enable USB3.0 Host support for RockPI-4 boards. Note that the Upper USB3.0 port is marked as otg and lower USB3.0 port marked as host, so this below log capture when USB3.0 mass storage plug in at lower USB 3.0 port. Log: Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:44 +00:00
CONFIG_MISC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-24 21:08:41 +00:00
CONFIG_ROCKCHIP_EFUSE=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
nvme: Split out PCI support Apple SoCs have an integrated NVMe controller that isn't connected over a PCIe bus. In preparation for adding support for this NVMe controller, split out the PCI support into its own file. This file is selected through a new CONFIG_NVME_PCI Kconfig option, so do a wholesale replacement of CONFIG_NVME with CONFIG_NVME_PCI. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-01-22 19:38:11 +00:00
CONFIG_NVME_PCI=y
rockchip: rock-pi-4: Enable PCI/NVME Enable PCI/NVME for M.2 Slot on RockPI-4 boards. => nvme info Device 0: Vendor: 0x144d Rev: 2B2QEXM7 Prod: S4EUNG0MC10012Y Type: Hard Disk Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:45 +00:00
CONFIG_PCI=y
rockchip: rock-pi-4: Enable USB3 Host Enable USB3.0 Host support for RockPI-4 boards. Note that the Upper USB3.0 port is marked as otg and lower USB3.0 port marked as host, so this below log capture when USB3.0 mass storage plug in at lower USB 3.0 port. Log: Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:44 +00:00
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:11:27 +00:00
CONFIG_RAM_RK3399_LPDDR4=y
rockchip: rock-pi-4: Enable USB3 Host Enable USB3.0 Host support for RockPI-4 boards. Note that the Upper USB3.0 port is marked as otg and lower USB3.0 port marked as host, so this below log capture when USB3.0 mass storage plug in at lower USB 3.0 port. Log: Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:44 +00:00
CONFIG_DM_RESET=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
rockchip: rock-pi-4: Enable USB3 Host Enable USB3.0 Host support for RockPI-4 boards. Note that the Upper USB3.0 port is marked as otg and lower USB3.0 port marked as host, so this below log capture when USB3.0 mass storage plug in at lower USB 3.0 port. Log: Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... cannot reset port 1!? 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (5 Gb/s, 224mA) SanDisk Dual Drive 040130e3ee554b7078843f4eb331646 Cc: Tom Cubie <tom@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:44 +00:00
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
rockchip: rock-pi-4: Enable HDMI output Enable config options to get HDMI output on RockPI-4 boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:47 +00:00
CONFIG_USB_KEYBOARD=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-27 01:10:37 +00:00
CONFIG_USB_GADGET=y
rockchip: rock-pi-4: Enable HDMI output Enable config options to get HDMI output on RockPI-4 boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-07-07 13:50:47 +00:00
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_DISPLAY_ROCKCHIP_HDMI=y
rockchip: rk3399: Add Rock PI 4 support Add initial support for Rock PI 4 board. Specification - Rockchip RK3399 - LPDDR4 - eMMC - SD card slot - RTL8211E 1Gbps - HDMI In/Out, DP, MIPI DSI/CSI - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-rock-pi-4.dts sync from Linux 5.1-rc2: "arm64: dts: rockchip: add ROCK Pi 4 DTS support" (sha1: 1b5715c602fda7b812af0e190eddcce2812e5417) Signed-off-by: Akash Gajjar <akash@openedev.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-17 10:29:41 +00:00
CONFIG_SPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y
Reference in a new issue Copy permalink