Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 08:57:58 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi

325 lines
8.2 KiB
Text
Raw Normal View History

arm: dts: ti: Add Support for J721E SoC Add initial SoC definition for J721E SoC. Kernel dts posted here: https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:53 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
*
* Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
*/
&cbass_mcu_wakeup {
dmsc: dmsc@44083000 {
compatible = "ti,k2g-sci";
ti,host-id = <12>;
mbox-names = "rx", "tx";
mboxes= <&secure_proxy_main 11>,
<&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x00 0x44083000 0x0 0x1000>;
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
};
k3_clks: clocks {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
ti,scan-clocks-from-dt;
};
k3_reset: reset-controller {
compatible = "ti,sci-reset";
#reset-cells = <2>;
};
};
arm: dts: k3-j721e: Sync CPSW DT node from kernel Sync CPSW DT node from Kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-06 08:06:55 +00:00
mcu_conf: syscon@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40f00000 0x20000>;
phy_gmii_sel: phy@4040 {
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4040 0x4>;
#phy-cells = <1>;
};
};
arm: dts: ti: Add Support for J721E SoC Add initial SoC definition for J721E SoC. Kernel dts posted here: https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:53 +00:00
wkup_pmx0: pinmux@4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c000 0x00 0x178>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
};
wkup_uart0: serial@42300000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 287 0>;
clock-names = "fclk";
};
arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent wkup_i2c0 node Add tps65941 node and dependent wkup_i2c0 node needed for AVS class 0 support Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-10-24 09:30:59 +00:00
wkup_i2c0: i2c@42120000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x42120000 0x0 0x100>;
interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 197 0>;
power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
};
arm: dts: ti: Add Support for J721E SoC Add initial SoC definition for J721E SoC. Kernel dts posted here: https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:53 +00:00
mcu_uart0: serial@40a00000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 0>;
clock-names = "fclk";
};
arm: dts: k3-j721e-mcu: Add MCU domain R5F cluster node The J721E SoCs have 3 dual-core Arm Cortex-R5F processor (R5FSS) subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within the MCU domain, and the remaining two clusters are present in the MAIN domain (MAIN_R5FSS0 & MAIN_R5FSS1). Each of these can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - ATCM and BTCM (further interleaved into two banks). There are some IP integration differences from standard Arm R5 clusters such as the absence of an ACP port, presence of an additional TI-specific Region Address Translater (RAT) module for translating 32-bit CPU addresses into larger system bus addresses etc. Add the DT node for the MCU domain R5F cluster/subsystem, the two R5 cores are added as child nodes to the main cluster/subsystem node. The cluster is configured to run in LockStep mode by default, with the ATCMs enabled to allow the R5 cores to execute code from DDR with boot-strapping code from ATCM. The inter-processor communication between the main A72 cores and these processors is achieved through shared memory and Mailboxes. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-09-04 10:31:37 +00:00
mcu_r5fss0: r5fss@41000000 {
compatible = "ti,j721e-r5fss";
lockstep-mode = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
mcu_r5fss0_core0: r5f@41000000 {
compatible = "ti,j721e-r5f";
reg = <0x41000000 0x00008000>,
<0x41010000 0x00008000>;
reg-names = "atcm", "btcm";
ti,sci = <&dmsc>;
ti,sci-dev-id = <250>;
ti,sci-proc-ids = <0x01 0xFF>;
resets = <&k3_reset 250 1>;
atcm-enable = <1>;
btcm-enable = <1>;
loczrama = <1>;
};
mcu_r5fss0_core1: r5f@41400000 {
compatible = "ti,j721e-r5f";
reg = <0x41400000 0x00008000>,
<0x41410000 0x00008000>;
reg-names = "atcm", "btcm";
ti,sci = <&dmsc>;
ti,sci-dev-id = <251>;
ti,sci-proc-ids = <0x02 0xFF>;
resets = <&k3_reset 251 1>;
atcm-enable = <1>;
btcm-enable = <1>;
loczrama = <1>;
};
};
arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not possible to use OSPI0 and HBMC simultaneously as they are muxed within the Flash Subsystem hence disable HBMC by default as keep OSPI enabled. Bootloader will fixup DT when it detects HyperFlash instead of OSPI. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23 08:00:02 +00:00
fss: fss@47000000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x47000000 0x0 0x100>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
hbmc_mux: hbmc-mux {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x4 0x2>; /* HBMC select */
};
hbmc: hyperbus@47034000 {
compatible = "ti,j721e-hbmc", "ti,am654-hbmc";
reg = <0x0 0x47034000 0x0 0x100>,
<0x5 0x00000000 0x1 0x0000000>;
power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <2>;
#size-cells = <1>;
mux-controls = <&hbmc_mux 0>;
assigned-clocks = <&k3_clks 102 0>;
assigned-clock-rates = <250000000>;
};
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
ospi0: spi@47040000 {
compatible = "ti,am654-ospi";
reg = <0x0 0x47040000 0x0 0x100>,
<0x5 0x00000000 0x1 0x0000000>;
interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x0>;
clocks = <&k3_clks 103 0>;
assigned-clocks = <&k3_clks 103 0>;
assigned-clock-parents = <&k3_clks 103 2>;
assigned-clock-rates = <166666666>;
power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
ospi1: spi@47050000 {
compatible = "ti,am654-ospi";
reg = <0x0 0x47050000 0x0 0x100>,
<0x7 0x00000000 0x1 0x00000000>;
interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
cdns,fifo-depth = <256>;
cdns,fifo-width = <4>;
cdns,trigger-address = <0x0>;
clocks = <&k3_clks 104 0>;
arm: dts: k3-j721e-mcu-wakeup: Add assigned-clocks/rates properties for ospi1/qspi Add assigned-clocks/rates properties for ospi1/qspi. This is the expected rate as per ROM configuration. Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-04 04:40:00 +00:00
assigned-clocks = <&k3_clks 104 0>;
assigned-clock-rates = <133333333>;
ARM: dts: k3-j721e: Add OSPI DT nodes Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-02-04 05:39:52 +00:00
power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
};
arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not possible to use OSPI0 and HBMC simultaneously as they are muxed within the Flash Subsystem hence disable HBMC by default as keep OSPI enabled. Bootloader will fixup DT when it detects HyperFlash instead of OSPI. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23 08:00:02 +00:00
};
arm: dts: k3-j721e: Add I2C nodes J721e SoC has 2 I2C instances in MCU domain and 7 I2C instances in main domain. Add DT nodes for the same Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-27 17:52:13 +00:00
mcu_i2c0: i2c@40b00000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b00000 0x0 0x100>;
interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 194 0>;
power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
};
mcu_i2c1: i2c@40b10000 {
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b10000 0x0 0x100>;
interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "fck";
clocks = <&k3_clks 195 0>;
power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
};
arm: dts: k3-am65/j721e: Sync DMA DT bindings from Kernel DT Sync DT bindings from kernel DT and move them to out of -u-boot.dtsi files. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
2020-07-07 08:13:35 +00:00
mcu_navss {
compatible = "simple-mfd";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-coherent;
dma-ranges;
ti,sci-dev-id = <232>;
mcu_ringacc: ringacc@2b800000 {
compatible = "ti,am654-navss-ringacc";
reg = <0x0 0x2b800000 0x0 0x400000>,
<0x0 0x2b000000 0x0 0x400000>,
<0x0 0x28590000 0x0 0x100>,
<0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
ti,sci-dev-id = <235>;
};
mcu_udmap: dma-controller@285c0000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
<0x0 0x2aa00000 0x0 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
#dma-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <236>;
ti,ringacc = <&mcu_ringacc>;
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
<0x0f>; /* TX_HCHAN */
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
<0x0b>; /* RX_HCHAN */
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
};
};
arm: dts: k3-j721e: Sync CPSW DT node from kernel Sync CPSW DT node from Kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-06 08:06:55 +00:00
mcu_cpsw: ethernet@46000000 {
compatible = "ti,j721e-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x46000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
dma-coherent;
clocks = <&k3_clks 18 22>;
clock-names = "fck";
power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
dmas = <&mcu_udmap 0xf000>,
<&mcu_udmap 0xf001>,
<&mcu_udmap 0xf002>,
<&mcu_udmap 0xf003>,
<&mcu_udmap 0xf004>,
<&mcu_udmap 0xf005>,
<&mcu_udmap 0xf006>,
<&mcu_udmap 0xf007>,
<&mcu_udmap 0x7000>;
dma-names = "tx0", "tx1", "tx2", "tx3",
"tx4", "tx5", "tx6", "tx7",
"rx";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
label = "port1";
ti,syscon-efuse = <&mcu_conf 0x200>;
phys = <&phy_gmii_sel 1>;
};
};
davinci_mdio: mdio@f00 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x0 0xf00 0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&k3_clks 18 22>;
clock-names = "fck";
bus_freq = <1000000>;
};
cpts@3d000 {
compatible = "ti,am65-cpts";
reg = <0x0 0x3d000 0x0 0x400>;
clocks = <&k3_clks 18 2>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
};
};
arm: dts: k3-j721e-mcu-wakeup: Introduce chipid node Introduce a chipid node to provide a UCLASS_SOC driver to identify TI K3 SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
2020-07-16 04:40:01 +00:00
chipid: chipid@43000014 {
compatible = "ti,am654-chipid";
reg = <0x0 0x43000014 0x0 0x4>;
};
arm: dts: ti: Add Support for J721E SoC Add initial SoC definition for J721E SoC. Kernel dts posted here: https://lore.kernel.org/lkml/20190522161921.20750-1-nm@ti.com/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-06-13 04:59:53 +00:00
};
Reference in a new issue Copy permalink