u-boot/arch/arm/mach-lpc32xx/cpu.c

81 lines
1.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <net.h>
#include <netdev.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/arch/wdt.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
void reset_cpu(ulong addr)
{
/* Enable watchdog clock */
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
/* To be compatible with the original U-Boot code:
* addr: - 0: perform hard reset.
* - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */
if (addr == 0) {
/* Reset pulse length is 13005 peripheral clock frames */
writel(13000, &wdt->pulse);
/* Force WDOG_RESET2 and RESOUT_N signal active */
writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1
| WDTIM_MCTRL_M_RES2, &wdt->mctrl);
} else {
/* Force match output active */
writel(0x01, &wdt->emr);
/* Internal reset on match output (no pulse on "RESOUT_N") */
writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl);
}
while (1)
/* NOP */;
}
#if defined(CONFIG_ARCH_CPU_INIT)
int arch_cpu_init(void)
{
/*
* It might be necessary to flush data cache, if U-Boot is loaded
* from kickstart bootloader, e.g. from S1L loader
*/
flush_dcache_all();
return 0;
}
#else
#error "You have to select CONFIG_ARCH_CPU_INIT"
#endif
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
printf("CPU: NXP LPC32XX\n");
printf("CPU clock: %uMHz\n", get_hclk_pll_rate() / 1000000);
printf("AHB bus clock: %uMHz\n", get_hclk_clk_rate() / 1000000);
printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
return 0;
}
#endif
#ifdef CONFIG_LPC32XX_ETH
int cpu_eth_init(struct bd_info *bis)
{
lpc32xx_eth_initialize(bis);
return 0;
}
#endif