Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-17 16:53:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/qemu-ppce500_defconfig

68 lines
1.6 KiB
Text
Raw Normal View History

kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_PPC=y
powerpc: mpc85xx: Set TEXT_BASE addresses to real base values Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are manually increased by 0x1000 due to .bootpg section. This section has size of 0x1000 bytes and is manually put by linker script before .text section (and therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Due to this fact lot of other config options are manually increased by 0x1000 value to make correct layout. Note that entry point is not on CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image). Cleanup handling of .bootpg section when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Put .bootpg code directly into .text section and move text base address to the start of .bootpg code. And finally remove +0x1000 value from lot of config options. With this removal custom PHDRS is not used anymore, so remove it too. After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at address -0x1000 anymore. Tested on P2020 board with SPL and proper U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-16 12:19:44 +00:00
CONFIG_SYS_TEXT_BASE=0xf00000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
arm: qemu-ppce500: Add a devicetree file This uses QEMU virt which creates its own devicetree. Add an empty version of this file, so that we can at least build this board when devicetrees are required. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:19 +00:00
CONFIG_DEFAULT_DEVICE_TREE="qemu-ppce500"
Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-14 18:36:40 +00:00
CONFIG_SYS_CLK_FREQ=33000000
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_MPC85xx=y
Convert CONFIG_CMD_ERRATA to Kconfig This converts the following to Kconfig: CONFIG_CMD_ERRATA Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:15 +00:00
# CONFIG_CMD_ERRATA is not set
kconfig: add board Kconfig and defconfig files This commit adds: - arch/${ARCH}/Kconfig provide a menu to select target boards - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig set CONFIG macros to the appropriate values for each board - configs/${TARGET_BOARD}_defconfig default setting of each board (This commit was automatically generated by a conversion script based on boards.cfg) In Linux Kernel, defconfig files are located under arch/${ARCH}/configs/ directory. It works in Linux Kernel since ARCH is always given from the command line for cross compile. But in U-Boot, ARCH is not given from the command line. Which means we cannot know ARCH until the board configuration is done. That is why all the "*_defconfig" files should be gathered into a single directory ./configs/. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 05:08:14 +00:00
CONFIG_TARGET_QEMU_PPCE500=y
Convert CONFIG_ENABLE_36BIT_PHYS to Kconfig This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-15 16:03:45 +00:00
CONFIG_ENABLE_36BIT_PHYS=y
Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig This converts the following to Kconfig: CONFIG_SYS_MPC85XX_NO_RESETVEC Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 02:59:37 +00:00
CONFIG_SYS_MPC85XX_NO_RESETVEC=y
Kconfig: Move CONFIG_FIT and related options to Kconfig There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-23 05:55:43 +00:00
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
powerpc: mpc85xx: Set TEXT_BASE addresses to real base values Currently CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE addresses are manually increased by 0x1000 due to .bootpg section. This section has size of 0x1000 bytes and is manually put by linker script before .text section (and therefore before base address) when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Due to this fact lot of other config options are manually increased by 0x1000 value to make correct layout. Note that entry point is not on CONFIG_SPL_TEXT_BASE (image+0x1000) but it is really on address CONFIG_SPL_TEXT_BASE-0x1000 (means at the start of the image). Cleanup handling of .bootpg section when CONFIG_SYS_MPC85XX_NO_RESETVEC is set. Put .bootpg code directly into .text section and move text base address to the start of .bootpg code. And finally remove +0x1000 value from lot of config options. With this removal custom PHDRS is not used anymore, so remove it too. After this change entry point would be at CONFIG_SPL_TEXT_BASE and not at address -0x1000 anymore. Tested on P2020 board with SPL and proper U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-16 12:19:44 +00:00
CONFIG_SYS_MONITOR_BASE=0x00F00000
configs: Re-sync BOOTDELAY changes With updated moveconfig.py and an better default, re-generate the migration of BOOTDELAY to the defconfig. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-13 13:45:14 +00:00
CONFIG_BOOTDELAY=1
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr"
common: Add DISPLAY_BOARDINFO Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12 01:33:46 +00:00
# CONFIG_DISPLAY_BOARDINFO is not set
treewide: Migrate CONFIG_LAST_STAGE_INIT to Kconfig Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 12:38:16 +00:00
CONFIG_LAST_STAGE_INIT=y
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 01:37:19 +00:00
CONFIG_HUSH_PARSER=y
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=276
Convert CONFIG_CMD_REGINFO to Kconfig This patch converts CONFIG_CMD_REGINFO to Kconfig Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:40 +00:00
CONFIG_CMD_REGINFO=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GREPENV=y
ppc: qemu: Enable driver model At present QEMU ppce500 target has not been migrated to driver model yet. As a start, let's enable driver model and the 'dm' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:31 +00:00
CONFIG_CMD_DM=y
ppc: qemu: Enable GPIO support QEMU ppce500 target integrates a GPIO controller that is compatible with the QorIQ GPIO controller. Enable the DM GPIO driver for it and the 'gpio' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:51 +00:00
CONFIG_CMD_GPIO=y
Convert CONFIG_CMD_PCI to Kconfig This converts the following to Kconfig: CONFIG_CMD_PCI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-04 22:34:34 +00:00
CONFIG_CMD_PCI=y
ppc: qemu: Enable support for power off via GPIO The QEMU ppce500 target provides the power off functionality via the GPIO pin#0, and we can support this using the sysreset gpio poweroff driver. Let's enable it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:53 +00:00
CONFIG_CMD_POWEROFF=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
Convert CONFIG_CMD_HASH to Kconfig This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:25 +00:00
# CONFIG_CMD_HASH is not set
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_EXT2=y
disk: convert CONFIG_DOS_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-27 10:00:37 +00:00
CONFIG_DOS_PARTITION=y
ppc: qemu: Enable OF_CONTROL The QEMU ppce500 machine generates a device tree blob and passes it to U-Boot during boot. Let's enable OF_CONTROL with OF_BOARD and provide board_fdt_blob_setup() in the board codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:30 +00:00
CONFIG_OF_CONTROL=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_BOOTFILE to Kconfig This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:48 +00:00
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
ppc: qemu: Enable eTSEC support QEMU ppce500 target can dynamically instantiate an eTSEC device if "-device eTSEC" is given to QEMU. This commit enables eTSEC driver and the required fixed PHY driver to create a usable network configuration using eTSEC. Unlike a real world 85xx board that usually stores the eTSEC MAC address in an EEPROM, CONFIG_NET_RANDOM_ETHADDR is required for QEMU otherwise U-Boot ethernet initialization complains no valid ethernet address is set. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-14 12:15:05 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
ppc: qemu: Enable driver model At present QEMU ppce500 target has not been migrated to driver model yet. As a start, let's enable driver model and the 'dm' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:31 +00:00
CONFIG_DM=y
ppc: qemu: Create a virtual memory mapping of the platform bus QEMU ppce500 target can dynamically instantiate an eTSEC device on a platform bus if "-device eTSEC" is given to QEMU. It is presented as a "simple-bus" in the device tree, with an additional compatible string "qemu,platform". Let's create a virtual memory mapping for it in misc_init_r(), in preparation to adding eTSEC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-14 12:15:04 +00:00
CONFIG_SIMPLE_BUS_CORRECT_RANGE=y
ppc: qemu: Enable VirtIO BLK support Enable VirtIO BLK driver so that we can store a kernel image to a disk image and boot from there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:48 +00:00
CONFIG_BLK=y
CONFIG_HAVE_BLOCK_DEVICE=y
Convert CONFIG_LBA48 et al to Kconfig This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 02:59:28 +00:00
CONFIG_LBA48=y
Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig This converts the following to Kconfig: CONFIG_CHIP_SELECTS_PER_CTRL Cc: Alison Wang <alison.wang@nxp.com> Cc: Pramod Kumar <pramod.kumar_1@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:53 +00:00
CONFIG_CHIP_SELECTS_PER_CTRL=0
ppc: qemu: Enable GPIO support QEMU ppce500 target integrates a GPIO controller that is compatible with the QorIQ GPIO controller. Enable the DM GPIO driver for it and the 'gpio' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:51 +00:00
CONFIG_MPC8XXX_GPIO=y
ppc: qemu: Enable RTC support via I2C The QEMU ppce500 target integrates a Freescale I2C controller and has a Pericom pt7c4338 RTC connected to it. Enable corresponding DM drivers so that 'date' command is actually useful. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:54 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_FSL=y
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-13 17:48:42 +00:00
# CONFIG_MMC is not set
ppc: qemu: Enable eTSEC support QEMU ppce500 target can dynamically instantiate an eTSEC device if "-device eTSEC" is given to QEMU. This commit enables eTSEC driver and the required fixed PHY driver to create a usable network configuration using eTSEC. Unlike a real world 85xx board that usually stores the eTSEC MAC address in an EEPROM, CONFIG_NET_RANDOM_ETHADDR is required for QEMU otherwise U-Boot ethernet initialization complains no valid ethernet address is set. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-14 12:15:05 +00:00
CONFIG_PHY_FIXED=y
CONFIG_DM_MDIO=y
net: Move CONFIG_E1000 options to Kconfig Move config for the E1000 Ethernet driver to Kconfig and tidy up affected boards. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-08-19 15:33:43 +00:00
CONFIG_E1000=y
ppc: qemu: Enable eTSEC support QEMU ppce500 target can dynamically instantiate an eTSEC device if "-device eTSEC" is given to QEMU. This commit enables eTSEC driver and the required fixed PHY driver to create a usable network configuration using eTSEC. Unlike a real world 85xx board that usually stores the eTSEC MAC address in an EEPROM, CONFIG_NET_RANDOM_ETHADDR is required for QEMU otherwise U-Boot ethernet initialization complains no valid ethernet address is set. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-14 12:15:05 +00:00
CONFIG_TSEC_ENET=y
ppc: qemu: Switch over to use DM ETH and PCI At present the board supports non-DM version PCI and E1000 drivers. Switch over to use DM ETH and PCI by: - Rewrite the PCI address map functions using DM APIs - Enable CONFIG_MISC_INIT_R to do the PCI initialization and address map - Drop unnecessary ad-hoc config macros - Remove board_eth_init() in the board codes Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:43 +00:00
CONFIG_PCI_MPC85XX=y
ppc: qemu: Enable RTC support via I2C The QEMU ppce500 target integrates a Freescale I2C controller and has a Pericom pt7c4338 RTC connected to it. Enable corresponding DM drivers so that 'date' command is actually useful. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:54 +00:00
CONFIG_DM_RTC=y
ppc: qemu: Switch over to use DM serial The QEMU ppce500 target integrates 2 NS16550 serial ports. Switch over to use the DM version of the driver by: - drop unnecessary ad-hoc config macros - add get_serial_clock() in the board codes Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:39 +00:00
CONFIG_DM_SERIAL=y
ns16550: move CONFIG_SYS_NS16550 to Kconfig Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-19 13:48:14 +00:00
CONFIG_SYS_NS16550=y
ppc: qemu: Enable support for power off via GPIO The QEMU ppce500 target provides the power off functionality via the GPIO pin#0, and we can support this using the sysreset gpio poweroff driver. Let's enable it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:53 +00:00
CONFIG_SYSRESET=y
# CONFIG_SYSRESET_CMD_RESET is not set
CONFIG_SYSRESET_CMD_POWEROFF=y
CONFIG_POWEROFF_GPIO=y
ppc: qemu: Enable VirtIO NET support By default the QEMU ppce500 machine connects a VirtIO NET to the PCI controller, although it can be replaced to an e1000 NIC via additional command line options. Now that we have switched over to DM PCI, VirtIO support becomes possible. This commit enables the support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:46 +00:00
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_NET=y
ppc: qemu: Enable VirtIO BLK support Enable VirtIO BLK driver so that we can store a kernel image to a disk image and boot from there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:48 +00:00
CONFIG_VIRTIO_BLK=y
powerpc: move ADDR_MAP to Kconfig Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-03 12:43:40 +00:00
CONFIG_ADDR_MAP=y
fdt: Make OF_BOARD a bool option This should not be a separate option from OF_SEPARATE. It is a run-time option to override the devicetree, even if present. Move the option out of the choice. Disable BINMAN_FDT for a few boards which don't actually use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-17 03:59:21 +00:00
# CONFIG_BINMAN_FDT is not set
Move CONFIG_PANIC_HANG to Kconfig Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-04 03:37:00 +00:00
CONFIG_PANIC_HANG=y
Reference in a new issue Copy permalink