Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-30 06:53:09 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/usb/host/Kconfig

439 lines
12 KiB
Text
Raw Normal View History

usb: add basic USB configs in Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-07 09:48:31 +00:00
#
# USB Host Controller Drivers
#
comment "USB Host Controller Drivers"
usb: add (move) CONFIG_USB_HOST to Kconfig The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:34 +00:00
config USB_HOST
bool
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
select DM_USB
usb: add (move) CONFIG_USB_HOST to Kconfig The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:34 +00:00
usb: add basic USB configs in Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-07 09:48:31 +00:00
config USB_XHCI_HCD
bool "xHCI HCD (USB 3.0) support"
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on DM && OF_CONTROL
usb: add (move) CONFIG_USB_HOST to Kconfig The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:34 +00:00
select USB_HOST
usb: add basic USB configs in Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-07 09:48:31 +00:00
---help---
The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
"SuperSpeed" host controller hardware.
if USB_XHCI_HCD
usb: move CONFIG_USB_XHCI_DWC3 to Kconfig Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-06-03 22:35:04 +00:00
config USB_XHCI_DWC3
bool "DesignWare USB3 DRD Core Support"
help
Say Y or if your system has a Dual Role SuperSpeed
USB controller based on the DesignWare USB3 IP Core.
usb: host: Add simple of glue driver for DWC3 USB Controllers integration This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 15:08:00 +00:00
config USB_XHCI_DWC3_OF_SIMPLE
bool "DesignWare USB3 DRD Generic OF Simple Glue Layer"
usb: dwc3-of-simple: Fix dependencies This simple glue layer does not require CONFIG_MISC, but it does require CONFIG_DM_USB. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-12 08:41:10 +00:00
depends on DM_USB
usb: dwc3-of-simple: Add support for RK3399 Add compatible string for RK3399 and enable it by default on Rockchip platforms with USB3 support. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-30 16:01:54 +00:00
default y if ARCH_ROCKCHIP
usb: dwc3-of-simple: Add support for DRA7/AM57 platforms. Add the compatibility with "ti,dwc3" and enable it by default if DM_USB is enabled. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-12 08:41:11 +00:00
default y if DRA7XX
usb: host: Add simple of glue driver for DWC3 USB Controllers integration This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-11 15:08:00 +00:00
help
Support USB2/3 functionality in simple SoC integrations with
USB controller based on the DesignWare USB3 IP Core.
Convert CONFIG_USB_XHCI_EXYNOS et al to Kconfig This converts the following to Kconfig: CONFIG_USB_XHCI_EXYNOS CONFIG_USB_EHCI_EXYNOS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 03:03:00 +00:00
config USB_XHCI_EXYNOS
bool "Support for Samsung Exynos5 family on-chip xHCI USB controller"
depends on ARCH_EXYNOS5
default y
help
Enables support for he on-chip xHCI controller on Samsung Exynos5
SoCs.
xhci: mediatek: Add support for MTK xHCI host controller This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 09:35:18 +00:00
config USB_XHCI_MTK
bool "Support for MediaTek on-chip xHCI USB controller"
usb: xhci-mtk: add support for MediaTek MT7621 SoC This patch makes xhci-mtk driver available for MediaTek MT7621 SoC Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-05-20 03:22:56 +00:00
depends on ARCH_MEDIATEK || SOC_MT7621
xhci: mediatek: Add support for MTK xHCI host controller This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 09:35:18 +00:00
help
Enables support for the on-chip xHCI controller on MediaTek SoCs.
usb: xhci: Add Marvell MVEBU xHCI support This patch adds DM based support for the xHCI USB 3.0 controller integrated in the Armada 3700 SoC. It may be extended to be used by other MVEBU SoCs as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
2016-07-14 09:39:20 +00:00
config USB_XHCI_MVEBU
bool "MVEBU USB 3.0 support"
default y
depends on ARCH_MVEBU
mvebu: usb: xhci: Add VBUS regulator supply to the host driver The USB device should linked to VBUS regulator through "vbus-supply" DTS property. This patch adds handling for "vbus-supply" property inside the USB device entry for turning on the VBUS regulator upon the host adapter probe. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2017-02-12 09:10:30 +00:00
select DM_REGULATOR
usb: xhci: Add Marvell MVEBU xHCI support This patch adds DM based support for the xHCI USB 3.0 controller integrated in the Armada 3700 SoC. It may be extended to be used by other MVEBU SoCs as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
2016-07-14 09:39:20 +00:00
help
Choose this option to add support for USB 3.0 driver on mvebu
SoCs, which includes Armada8K, Armada3700 and other Armada
family SoCs.
usb: xhci: octeon: Add DWC3 glue layer for Octeon This patch adds the glue layer for the MIPS Octeon SoCs. It's ported mainly from the Linux code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2020-08-24 11:04:38 +00:00
config USB_XHCI_OCTEON
bool "Support for Marvell Octeon family on-chip xHCI USB controller"
depends on ARCH_OCTEON
default y
help
Enables support for the on-chip xHCI controller on Marvell Octeon
family SoCs. This is a driver for the dwc3 to provide the glue logic
to configure the controller.
Convert CONFIG_USB_XHCI_OMAP to Kconfig This converts the following to Kconfig: CONFIG_USB_XHCI_OMAP Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-13 00:32:22 +00:00
config USB_XHCI_OMAP
bool "Support for TI OMAP family xHCI USB controller"
depends on ARCH_OMAP2PLUS
help
Enables support for the on-chip xHCI controller found on some TI SoC
families. Note that some families have multiple contollers while
others only have something such as DesignWare-based controllers.
Consult the SoC documentation to determine if this option applies
to your hardware.
usb: xhci: Convert CONFIG_USB_XHCI_PCI to Kconfig Add CONFIG_USB_XHCI_PCI as a Kconfig option. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-07-19 13:50:08 +00:00
config USB_XHCI_PCI
bool "Support for PCI-based xHCI USB controller"
usb: xhci-pci: Drop non-DM version of xhci-pci driver As there is no board that currently uses xhci-pci driver without DM USB, drop its support and leave only DM support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-19 13:51:07 +00:00
depends on DM_USB
usb: xhci: Convert CONFIG_USB_XHCI_PCI to Kconfig Add CONFIG_USB_XHCI_PCI as a Kconfig option. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
2017-07-19 13:50:08 +00:00
default y if X86
help
Enables support for the PCI-based xHCI controller.
usb: xhci: Add Renesas R-Car xHCI driver Add firmware V3, firmware loader and XHCI glue for the Renesas R-Car Gen3 SoCs XHCI controller. Thus far only the R-Car Gen3 R8A7795 ES2.0+ and R8A7796 are supported. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Bin Meng <bmeng.cn@gmail.com>
2017-10-15 13:01:29 +00:00
config USB_XHCI_RCAR
bool "Renesas RCar USB 3.0 support"
default y
depends on ARCH_RMOBILE
help
Choose this option to add support for USB 3.0 driver on Renesas
RCar Gen3 SoCs.
usb: dwc3: Add dwc3 glue driver support for STi This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It configures the internal glue logic and syscfg registers. Part of this code been extracted from kernel.org driver (drivers/usb/dwc3/dwc3-st.c) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-05 09:04:24 +00:00
config USB_XHCI_STI
bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
depends on ARCH_STI
default y
help
Enables support for the on-chip xHCI controller on STMicroelectronics
STiH407 family SoCs. This is a driver for the dwc3 to provide the glue logic
to configure the controller.
arm: usb: dra7xx: xHCI registers based on USB port index Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Marek Vasut <marex@denx.de> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2017-02-23 13:39:36 +00:00
config USB_XHCI_DRA7XX_INDEX
int "DRA7XX xHCI USB index"
range 0 1
default 0
depends on DRA7XX
help
Select the DRA7XX xHCI USB index.
Current supported values: 0, 1.
usb: host: Move CONFIG_XHCI_FSL to Kconfig use Kconfig to select xhci accordingly. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-23 02:09:22 +00:00
config USB_XHCI_FSL
bool "Support for NXP Layerscape on-chip xHCI USB controller"
default y if ARCH_LS1021A || FSL_LSCH3 || FSL_LSCH2
depends on !SPL_NO_USB
help
Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
drivers: usb: host: Add BRCM xHCI driver Base driver for Broadcom xHCI controllers Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2020-04-09 03:53:15 +00:00
config USB_XHCI_BRCM
bool "Broadcom USB3 Host XHCI controller"
depends on DM_USB
help
USB controller based on the Broadcom USB3 IP Core.
Supports USB2/3 functionality.
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
endif # USB_XHCI_HCD
usb: add support of generic OHCI devices This driver is meant to be used with any OHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
2015-12-14 14:18:50 +00:00
Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig This converts the following to Kconfig: CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_MMIO_BIG_ENDIAN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:26 +00:00
config EHCI_DESC_BIG_ENDIAN
bool
config EHCI_MMIO_BIG_ENDIAN
bool
usb: add basic USB configs in Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-07 09:48:31 +00:00
config USB_EHCI_HCD
bool "EHCI HCD (USB 2.0) support"
Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig Migrate the rest of the users of CONFIG_USB_EHCI_HCD over to Kconfig. For a few SoCs, imply or default y this if USB is enabled. In some cases we had not already migrated to CONFIG_USB so do that as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-13 02:33:28 +00:00
default y if ARCH_MX5 || ARCH_MX6
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on DM && OF_CONTROL
usb: add (move) CONFIG_USB_HOST to Kconfig The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:34 +00:00
select USB_HOST
Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig This converts the following to Kconfig: CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_MMIO_BIG_ENDIAN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:26 +00:00
select EHCI_DESC_BIG_ENDIAN if SYS_BIG_ENDIAN
select EHCI_MMIO_BIG_ENDIAN if SYS_BIG_ENDIAN
usb: add basic USB configs in Kconfig Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
2014-11-07 09:48:31 +00:00
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
If your USB host controller supports USB 2.0, you will likely want to
configure this Host Controller Driver.
EHCI controllers are packaged with "companion" host controllers (OHCI
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
will connect to EHCI if the device is high speed, otherwise they
connect to a companion controller. If you configure EHCI, you should
probably configure the OHCI (for NEC and some other vendors) USB Host
Controller Driver or UHCI (for Via motherboards) Host Controller
Driver too.
You may want to read <file:Documentation/usb/ehci.txt>.
if USB_EHCI_HCD
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:35 +00:00
config USB_EHCI_IS_TDI
bool
dm: atmel: Add driver model support for the ehci driver Add driver model support while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-08-05 00:57:35 +00:00
config USB_EHCI_ATMEL
bool "Support for Atmel on-chip EHCI USB controller"
depends on ARCH_AT91
default y
---help---
Enables support for the on-chip EHCI controller on Atmel chips.
Convert CONFIG_USB_XHCI_EXYNOS et al to Kconfig This converts the following to Kconfig: CONFIG_USB_XHCI_EXYNOS CONFIG_USB_EHCI_EXYNOS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 03:03:00 +00:00
config USB_EHCI_EXYNOS
bool "Support for Samsung Exynos EHCI USB controller"
depends on ARCH_EXYNOS
default y
---help---
Enables support for the on-chip EHCI controller on Samsung Exynos
SoCs.
usb: ehci-marvell.c: Add DM support This patch adds driver model (DM) support to the Marvell EHCI driver. This will be used by the MVEBU SoC's, currently Armada XP and 38x. Tested on Marvell Armada XP and 38x eval boards. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-09-01 09:39:44 +00:00
config USB_EHCI_MARVELL
Kconfig: USB: Migrate existing USB_EHCI_xxx options The following options are migrated over fully now: - USB_EHCI_ATMEL - USB_EHCI_MARVELL - USB_EHCI_MX6 - USB_EHCI_MX7 - USB_EHCI_MSM - USB_EHCI_ZYNQ - USB_EHCI_GENERIC This also requires fixing the depends on USB_EHCI_MARVELL as it's used by Orion5X and Kirkwood as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-13 02:33:29 +00:00
bool "Support for Marvell on-chip EHCI USB controller"
rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:40 +00:00
depends on ARCH_MVEBU || ARCH_KIRKWOOD || ARCH_ORION5X
usb: ehci-marvell.c: Add DM support This patch adds driver model (DM) support to the Marvell EHCI driver. This will be used by the MVEBU SoC's, currently Armada XP and 38x. Tested on Marvell Armada XP and 38x eval boards. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-09-01 09:39:44 +00:00
default y
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:35 +00:00
select USB_EHCI_IS_TDI if !ARM64
usb: ehci-marvell.c: Add DM support This patch adds driver model (DM) support to the Marvell EHCI driver. This will be used by the MVEBU SoC's, currently Armada XP and 38x. Tested on Marvell Armada XP and 38x eval boards. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-09-01 09:39:44 +00:00
---help---
Enables support for the on-chip EHCI controller on MVEBU SoCs.
Convert CONFIG_USB_EHCI_MX5 to Kconfig This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-04 10:26:55 +00:00
config USB_EHCI_MX5
bool "Support for i.MX5 on-chip EHCI USB controller"
depends on ARCH_MX5
help
Enables support for the on-chip EHCI controller on i.MX5 SoCs.
arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb config to defconfig. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-07-23 14:19:35 +00:00
config USB_EHCI_MX6
ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULP The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-24 13:29:32 +00:00
bool "Support for i.MX6/i.MX7ULP on-chip EHCI USB controller"
usb: ehci-mx6: add support for i.MXRT Add support for usb1 and usb2 present on i.IMXRT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-05-20 14:10:15 +00:00
depends on ARCH_MX6 || ARCH_MX7ULP || ARCH_IMXRT
Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig This converts the following to Kconfig: CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_MMIO_BIG_ENDIAN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:26 +00:00
select EHCI_HCD_INIT_AFTER_RESET
arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb config to defconfig. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-07-23 14:19:35 +00:00
default y
---help---
Enables support for the on-chip EHCI controller on i.MX6 SoCs.
usb: move CONFIG_USB_EHCI_MX7 to Kconfig Create an entry for "config USB_EHCI_MX7" in Kconfig and switch over to it for all boards. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-13 07:25:36 +00:00
config USB_EHCI_MX7
bool "Support for i.MX7 on-chip EHCI USB controller"
usb: ehci-mx6: Add iMX8M support The iMX8M uses nop PHY, select PHY and NOP_PHY automatically. Otherwise, the DM capable driver is now perfectly compatible. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-02 12:07:22 +00:00
depends on ARCH_MX7 || IMX8M
Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to Kconfig This converts the following to Kconfig: CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_MMIO_BIG_ENDIAN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:26 +00:00
select EHCI_HCD_INIT_AFTER_RESET if ARCH_MX7
usb: ehci-mx6: Add iMX8M support The iMX8M uses nop PHY, select PHY and NOP_PHY automatically. Otherwise, the DM capable driver is now perfectly compatible. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-02 12:07:22 +00:00
select PHY if IMX8M
select NOP_PHY if IMX8M
usb: move CONFIG_USB_EHCI_MX7 to Kconfig Create an entry for "config USB_EHCI_MX7" in Kconfig and switch over to it for all boards. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-13 07:25:36 +00:00
default y
---help---
Enables support for the on-chip EHCI controller on i.MX7 SoCs.
Convert CONFIG_USB_EHCI_MXS to Kconfig This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:33 +00:00
config USB_EHCI_MXS
usb: Modify Kconfig of the USB_EHCI_MXS to use this driver with imx28 The ehci-mxs driver can be also used with imx28 SoC, not only imx23. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2021-12-22 09:55:06 +00:00
bool "Support for i.MX23/i.MX28 EHCI USB controller"
depends on ARCH_MX23 || ARCH_MX28
Convert CONFIG_USB_EHCI_MXS to Kconfig This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:33 +00:00
default y
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:35 +00:00
select USB_EHCI_IS_TDI
Convert CONFIG_USB_EHCI_MXS to Kconfig This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:33 +00:00
help
usb: Modify Kconfig of the USB_EHCI_MXS to use this driver with imx28 The ehci-mxs driver can be also used with imx28 SoC, not only imx23. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2021-12-22 09:55:06 +00:00
Enables support for the on-chip EHCI controller on i.MX23 and
i.MX28 SoCs.
Convert CONFIG_USB_EHCI_MXS to Kconfig This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:33 +00:00
Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig Follow the exiting logic for the i.MX options when migrating this option. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-13 02:33:30 +00:00
config USB_EHCI_OMAP
bool "Support for OMAP3+ on-chip EHCI USB controller"
depends on ARCH_OMAP2PLUS
usb: ehci-omap: Make Kconfig select PHY if USB_EHCI_OMAP The USB_EHCI_OMAP driver currently has a series of Kconfig options which let users specify a GPIO for the reset pin. Some devices may have only one reset, while others might have more. Since there is a nop phy driver, let's selct enable the PHY system, and imply the nop phy driver. The nop phy driver can now toggle the reset pins when putting the phy in and out of reset. If the gpio is listed under the phy, it will get toggled and the hard-coded config options specifying the GPIO numbers can eventually go away. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-19 23:08:44 +00:00
select PHY
imply NOP_PHY
Kconfig: OMAP: USB: Migrate CONFIG_USB_EHCI_OMAP to Kconfig Follow the exiting logic for the i.MX options when migrating this option. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-05-13 02:33:30 +00:00
default y
---help---
Enables support for the on-chip EHCI controller on OMAP3 and later
SoCs.
configs: move CONFIG_USB_EHCI_VF to Kconfig Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one and only user thereof being colibri_vf. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-03-25 16:24:54 +00:00
config USB_EHCI_VF
bool "Support for Vybrid on-chip EHCI USB controller"
depends on ARCH_VF610
default y
help
Enables support for the on-chip EHCI controller on Vybrid SoCs.
ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULP The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-24 13:29:32 +00:00
if USB_EHCI_MX6 || USB_EHCI_MX7
usb: ehci-mx6: introduce config for high active power pin Add a new config CONFIG_MXC_USB_OTG_HACTIVE which configures the OTG Power Pin to be high active. Low active is the reset value of the affected configuration register, hence the config option is named by the non-reset configuration. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-13 07:25:38 +00:00
config MXC_USB_OTG_HACTIVE
bool "USB Power pin high active"
---help---
Set the USB Power pin polarity to be high active (PWR_POL)
endif
ehci: Add support for Qualcomm EHCI This driver is able to reconfigure OTG controller into HOST mode. Board can add board-specific initialization as board_prepare_usb(). It requires USB_ULPI_VIEWPORT enabled in board configuration. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:26 +00:00
config USB_EHCI_MSM
bool "Support for Qualcomm on-chip EHCI USB controller"
depends on DM_USB
select USB_ULPI_VIEWPORT
ehci: msm: switch to generic PHY uclass All the underlying USB PHY was handled in the ehci driver. Use the generic phy API instead. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-21 10:35:50 +00:00
select MSM8916_USB_PHY
ehci: Add support for Qualcomm EHCI This driver is able to reconfigure OTG controller into HOST mode. Board can add board-specific initialization as board_prepare_usb(). It requires USB_ULPI_VIEWPORT enabled in board configuration. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
2016-03-31 21:12:26 +00:00
---help---
Enables support for the on-chip EHCI controller on Qualcomm
Snapdragon SoCs.
usb: ehci: Convert CONFIG_USB_EHCI_PCI to Kconfig This converts CONFIG_USB_EHCI_PCI to a Kconfig option, and updates all boards that use it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-09 07:21:54 +00:00
config USB_EHCI_PCI
bool "Support for PCI-based EHCI USB controller"
default y if X86
help
Enables support for the PCI-based EHCI controller.
Kconfig: tegra: Migrate USB_EHCI_TEGRA Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20 12:17:27 +00:00
config USB_EHCI_TEGRA
bool "Support for NVIDIA Tegra on-chip EHCI USB controller"
rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-06 12:02:41 +00:00
depends on ARCH_TEGRA
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:35 +00:00
select USB_EHCI_IS_TDI
Kconfig: tegra: Migrate USB_EHCI_TEGRA Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-02-20 12:17:27 +00:00
---help---
Enable support for Tegra on-chip EHCI USB controller
usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ Add Kconfig entry config option for USB_EHCI_ZYNQ and update the same to enable for all zynq boards which supports USB Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 09:21:51 +00:00
config USB_EHCI_ZYNQ
bool "Support for Xilinx Zynq on-chip EHCI USB controller"
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-08-24 12:41:51 +00:00
default y if ARCH_ZYNQ
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-09 13:27:35 +00:00
select USB_EHCI_IS_TDI
usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ Add Kconfig entry config option for USB_EHCI_ZYNQ and update the same to enable for all zynq boards which supports USB Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-07-22 09:21:51 +00:00
---help---
Enable support for Zynq on-chip EHCI USB controller
usb: add support for generic EHCI devices This driver is meant to be used with any EHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
2015-12-02 09:32:02 +00:00
config USB_EHCI_GENERIC
bool "Support for generic EHCI USB controller"
depends on DM_USB
sunxi: usb: Switch to Generic host controllers Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-22 12:48:10 +00:00
default ARCH_SUNXI
usb: add support for generic EHCI devices This driver is meant to be used with any EHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
2015-12-02 09:32:02 +00:00
---help---
Enables support for generic EHCI controller.
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:27 +00:00
config EHCI_HCD_INIT_AFTER_RESET
bool
arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly. Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2017-12-20 02:34:20 +00:00
config USB_EHCI_FSL
bool "Support for FSL on-chip EHCI USB controller"
Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to Kconfig This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:27 +00:00
select EHCI_HCD_INIT_AFTER_RESET
Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-01 01:08:29 +00:00
select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85xx && \
!(ARCH_B4860 || ARCH_B4420 || ARCH_P4080 || ARCH_P1020 || ARCH_P2020)
arm64: layerscape: Move CONFIG_HAS_FSL_DR_USB to Kconfig Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly. Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
2017-12-20 02:34:20 +00:00
---help---
Enables support for the on-chip EHCI controller on FSL chips.
Convert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig This converts the following to Kconfig: CONFIG_USB_EHCI_TXFIFO_THRESH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:31 +00:00
Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-01 01:08:29 +00:00
config SYS_FSL_USB_INTERNAL_UTMI_PHY
bool
depends on USB_EHCI_FSL
Convert CONFIG_USB_EHCI_TXFIFO_THRESH to Kconfig This converts the following to Kconfig: CONFIG_USB_EHCI_TXFIFO_THRESH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:31 +00:00
config USB_EHCI_TXFIFO_THRESH
hex
depends on USB_EHCI_TEGRA
default 0x10
help
This parameter affects a TXFILLTUNING field that controls how much
data is sent to the latency fifo before it is sent to the wire.
Without this parameter, the default (2) causes occasional Data Buffer
Errors in OUT packets depending on the buffer address and size.
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
endif # USB_EHCI_HCD
Convert CONFIG_USB_OHCI_NEW et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 15:02:31 +00:00
config USB_OHCI_NEW
bool
config SYS_USB_OHCI_CPU_INIT
bool
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
config USB_OHCI_HCD
bool "OHCI HCD (USB 1.1) support"
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on DM && OF_CONTROL
select USB_HOST
Convert CONFIG_USB_OHCI_NEW et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 15:02:31 +00:00
select USB_OHCI_NEW
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
UHCI specification. If your USB host controller follows the OHCI spec,
say Y. On most non-x86 systems, and on x86 hardware that's not using a
USB controller from Intel or VIA, this is appropriate. If your host
controller doesn't use PCI, this is probably appropriate. For a PCI
based system where you're not sure, the "lspci -v" entry will list the
right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
if USB_OHCI_HCD
usb, ohci, pci: add DM support for PCI-based OHCI USB controller add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-16 08:49:07 +00:00
config USB_OHCI_PCI
bool "Support for PCI-based OHCI USB controller"
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on PCI
usb, ohci, pci: add DM support for PCI-based OHCI USB controller add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-16 08:49:07 +00:00
help
Enables support for the PCI-based OHCI controller.
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
config USB_OHCI_GENERIC
bool "Support for generic OHCI USB controller"
sunxi: usb: Switch to Generic host controllers Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-22 12:48:10 +00:00
default ARCH_SUNXI
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
---help---
Enables support for generic OHCI controller.
usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-04-30 10:21:41 +00:00
config USB_OHCI_DA8XX
bool "Support for da850 OHCI USB controller"
help
Enable support for the da850 USB controller.
usb: add CONFIG_USB_OHCI_HCD in Kconfig Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:32 +00:00
endif # USB_OHCI_HCD
usb: add CONFIG_USB_UHCI_HCD in Kconfig There is no UHCI driver entry in Kconfig for now, but we have some UHCI drivers, for example, LEON. This is a placeholder in case we want to move them to Kconfig in the future. The help message was copied from Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:33 +00:00
Convert CONFIG_USB_OHCI_NEW et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 15:02:31 +00:00
config SYS_USB_OHCI_SLOT_NAME
string "Display name for the OHCI controller"
depends on USB_OHCI_NEW && !DM_USB
config SYS_USB_OHCI_MAX_ROOT_PORTS
int "Maximal number of ports of the root hub"
depends on USB_OHCI_NEW
default 1 if ARCH_SUNXI
config SYS_OHCI_SWAP_REG_ACCESS
bool "Perform byte swapping on OHCI controller register accesses"
depends on USB_OHCI_NEW
usb: add CONFIG_USB_UHCI_HCD in Kconfig There is no UHCI driver entry in Kconfig for now, but we have some UHCI drivers, for example, LEON. This is a placeholder in case we want to move them to Kconfig in the future. The help message was copied from Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:33 +00:00
config USB_UHCI_HCD
bool "UHCI HCD (most Intel and VIA) support"
usb: add (move) CONFIG_USB_HOST to Kconfig The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:34 +00:00
select USB_HOST
usb: add CONFIG_USB_UHCI_HCD in Kconfig There is no UHCI driver entry in Kconfig for now, but we have some UHCI drivers, for example, LEON. This is a placeholder in case we want to move them to Kconfig in the future. The help message was copied from Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-31 15:16:33 +00:00
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
standard, you may want to say Y, but see below. All recent boards
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
i810, i820) conform to this standard. Also all VIA PCI chipsets
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133) and LEON/GRLIB SoCs with the GRUSBHC controller.
If unsure, say Y.
if USB_UHCI_HCD
endif # USB_UHCI_HCD
usb: Kconfig: migrate USB_DWC2 to Kconfig This change migrates the USB_DWC2 configuration item to Kconfig and runs moveconfig to adjust header files and defconfig. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Split off into a separate patch: Ran moveconfig to migrate other boards: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-03 16:30:06 +00:00
config USB_DWC2
bool "DesignWare USB2 Core support"
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on DM && OF_CONTROL
usb: Kconfig: migrate USB_DWC2 to Kconfig This change migrates the USB_DWC2 configuration item to Kconfig and runs moveconfig to adjust header files and defconfig. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Split off into a separate patch: Ran moveconfig to migrate other boards: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-03 16:30:06 +00:00
select USB_HOST
---help---
The DesignWare USB 2.0 controller is compliant with the
USB-Implementers Forum (USB-IF) USB 2.0 specifications.
Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps)
operation is compliant to the controller Supplement. If you want to
enable this controller in host mode, say Y.
usb: dwc2: Allow selection of data buffer size If we use hardware with very small RAM (let's consider just a couple of hundreds of kB but not megabytes) it is not super convenient to lose 64kB for statically allocated bufer which most probably won't be used as big as it is. Typically we'll have much shorter data packages to excahnge and in the worst case longer packets will be split on separate transactions. For those corner-cases user will be able to set his buffer size of choice via USB_DWC2_BUFFER_SIZE option in menuconfig. By default we'll use 64 kB as it was hard-coeded before so existing users shouldn't be affected at all. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Marek Vasut <marex@denx.de>
2018-02-28 13:16:58 +00:00
if USB_DWC2
config USB_DWC2_BUFFER_SIZE
int "Data buffer size in kB"
default 64
---help---
By default 64 kB buffer is used but if amount of RAM avaialble on
the target is not enough to accommodate allocation of buffer of
that size it is possible to shrink it. Smaller sizes should be fine
because larger transactions could be split in smaller ones.
endif # USB_DWC2
usb: r8a66597: Add Kconfig entry Add missing Kconfig entry for the R8A66597 driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-11 11:23:43 +00:00
config USB_R8A66597_HCD
bool "Renesas R8A66597 USB Core support"
usb: Enforce DM_USB migration for USB_HOST devices. As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09 14:11:56 +00:00
depends on DM && OF_CONTROL
usb: r8a66597: Add Kconfig entry Add missing Kconfig entry for the R8A66597 driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-11 11:23:43 +00:00
select USB_HOST
---help---
This enables support for the on-chip Renesas R8A66597 USB 2.0
controller, present in various RZ and SH SoCs.
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-13 00:02:04 +00:00
Convert CONFIG_USB_OHCI_NEW et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 15:02:31 +00:00
config USB_ATMEL
bool "AT91 OHCI USB support"
depends on ARCH_AT91
select SYS_USB_OHCI_CPU_INIT
select USB_OHCI_NEW
choice
prompt "Clock for OHCI"
depends on USB_ATMEL
config USB_ATMEL_CLK_SEL_PLLB
bool "PLLB"
config USB_ATMEL_CLK_SEL_UPLL
bool "UPLL"
endchoice
config USB_OHCI_LPC32XX
bool "LPC32xx USB OHCI support"
depends on ARCH_LPC32XX
select SYS_USB_OHCI_CPU_INIT
select USB_OHCI_NEW
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-13 00:02:04 +00:00
config USB_MAX_CONTROLLER_COUNT
int "Maximum number of USB host controllers"
depends on USB_EHCI_FSL || USB_XHCI_FSL || \
(SPL_USB_HOST && !DM_SPL_USB) || (USB_HOST && !DM_USB)
default 1
Reference in a new issue Copy permalink