Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 17:07:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/am3517_evm_defconfig

104 lines
3.2 KiB
Text
Raw Normal View History

kconfig: remove meaningless prefixes in defconfig files Since commit e02ee2548afe (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-12 04:24:39 +00:00
CONFIG_ARM=y
ARM: am3517-evm: Migrate to SPL_OF_CONTROL Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-24 16:57:25 +00:00
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-25 04:10:11 +00:00
CONFIG_ARCH_OMAP2PLUS=y
Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig This converts the following to Kconfig: CONFIG_SYS_TEXT_BASE The includes, whitelist, etc. were left for now but I don't get any build errors or warnings on the omap3_logic_defconfig or am3517_evm_defconfig builds I tried. Signed-off-by: Adam Ford <aford173@gmail.com>
2017-07-28 13:32:52 +00:00
CONFIG_SYS_TEXT_BASE=0x80100000
ARM: am3517-evm: Migrate to SPL_OF_CONTROL Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-24 16:57:25 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x4000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_TI_COMMON_CMD_OPTIONS=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=2
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="am3517-evm"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06 17:54:25 +00:00
CONFIG_SPL_TEXT_BASE=0x40200000
kconfig: remove meaningless prefixes in defconfig files Since commit e02ee2548afe (kconfig: switch to single .config configuration), the prefixes in defconfig files such as "+S:", "+ST:", etc., are meaningless. This commit was generated by the following command: find configs -name '*_defconfig' | xargs sed -i 's/^+*S*T*://' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-12 04:24:39 +00:00
CONFIG_TARGET_AM3517_EVM=y
Convert CONFIG_EMIF4 et al to Kconfig This converts the following to Kconfig: CONFIG_EMIF4 CONFIG_SDRC Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-09-12 20:27:33 +00:00
CONFIG_EMIF4=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23 19:24:14 +00:00
CONFIG_SYS_PROMPT="AM3517_EVM # "
configs: am3517_evm: Fix boot hang SPL is really tight on space, so decrease a little memory that we allocate in order to fix boot hang. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Derald D. Woods <woods.technical@gmail.com> Link: https://lore.kernel.org/r/20210626134258.601331-1-aford173@gmail.com
2021-06-26 13:42:58 +00:00
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2500
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-08 00:27:54 +00:00
CONFIG_SPL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-25 15:58:50 +00:00
CONFIG_LTO=y
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
CONFIG_DISTRO_DEFAULTS=y
Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-25 16:16:03 +00:00
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2016-06-07 06:31:14 +00:00
CONFIG_BOOTDELAY=10
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi"
Convert CONFIG_SPL_PAD_TO et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-16 21:20:26 +00:00
CONFIG_SPL_MAX_SIZE=0xec00
ARM: omap3: am3517-evm: Add device tree and DM support With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-09-20 01:32:11 +00:00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-27 16:48:32 +00:00
CONFIG_SYS_SPL_MALLOC=y
CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
ARM: am3517-evm: Migrate to SPL_OF_CONTROL Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-24 16:57:25 +00:00
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4 Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-01-23 06:20:05 +00:00
# CONFIG_SPL_FS_EXT4 is not set
i2c: Rename SPL/TPL_I2C_SUPPORT to I2C Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-11 03:14:36 +00:00
# CONFIG_SPL_I2C is not set
Convert CONFIG_SPL_MTD_SUPPORT to Kconfig Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13 05:18:46 +00:00
CONFIG_SPL_MTD_SUPPORT=y
Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 13:09:44 +00:00
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
Convert CONFIG_SPL_NAND_BASE et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 13:09:45 +00:00
CONFIG_SPL_NAND_BASE=y
ARM: am3517_evm: Enable Falcon Mode The other OMAP3 based Logic PD boards have Falcon Mode enabled, so this patch makes it possible on the AM3517-evm as well. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-02-14 20:06:35 +00:00
CONFIG_SPL_OS_BOOT=y
Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig This converts the following to Kconfig: CONFIG_SYS_SPL_ARGS_ADDR In doing so, we also consistently use this variable for SPL_OS_BOOT and not CONFIG_SYS_FDT_BASE in some cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-28 02:06:52 +00:00
CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-28 20:43:53 +00:00
CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x2a0000
spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to Kconfig Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-30 16:39:59 +00:00
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-28 21:21:03 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200
Rename SPL_POWER_SUPPORT to SPL_POWER Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-11 03:14:24 +00:00
# CONFIG_SPL_POWER is not set
Convert CONFIG_SYS_MAXARGS to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 20:21:06 +00:00
CONFIG_SYS_MAXARGS=64
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=1054
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:30 +00:00
# CONFIG_CMD_IMI is not set
configs: am3517-evm: Setup NAND booting The NAND offsets for the kernel and U-Boot were missing. This patch sets up the offsets so the AM3517-EVM can boot from NAND when DIP switches S7:1 and S7:4 are to the OFF position Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-21 23:12:12 +00:00
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0xaa0000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
Move defaults from config_cmd_default.h to Kconfig This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-22 21:15:30 +00:00
# CONFIG_CMD_FLASH is not set
omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-08-22 15:50:02 +00:00
# CONFIG_CMD_GPT is not set
configs: Migrate CMD_NAND* Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-29 01:31:42 +00:00
CONFIG_CMD_NAND=y
omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-08-22 15:50:02 +00:00
# CONFIG_CMD_SPI is not set
defconfig: Reorder boards' defconfig files Some boards' defconfig files are out of order. Clean this up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-03-21 13:47:40 +00:00
# CONFIG_CMD_SETEXPR is not set
Convert CONFIG_BOOTP_DNS2 to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-16 23:06:17 +00:00
CONFIG_BOOTP_DNS2=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_CACHE=y
omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-08-22 15:50:02 +00:00
# CONFIG_CMD_TIME is not set
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1920k(u-boot),256k(u-boot-env),8m(kernel),512k(dtb),-(rootfs)"
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
CONFIG_CMD_UBI=y
ARM: omap3: am3517-evm: Add device tree and DM support With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2017-09-20 01:32:11 +00:00
CONFIG_OF_CONTROL=y
ARM: am3517-evm: Migrate to SPL_OF_CONTROL Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-24 16:57:25 +00:00
CONFIG_SPL_OF_CONTROL=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
AM3517_EVM: Fix Environmental location The am3517-evm boards stores the environment in NAND, but after merging various configs, the board was trying to load environment variables from FAT which would ultimately fail and cause some chatter. This patch removes the ENV_IS_IN_FAT flag to eliminate the noise. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-06 19:39:50 +00:00
# CONFIG_ENV_IS_IN_FAT is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_NAND=y
Convert CONFIG_BOOTFILE to Kconfig This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-25 16:19:48 +00:00
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_VERSION_VARIABLE=y
Convert CONFIG_NET_RETRY_COUNT to Kconfig This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-11 14:12:02 +00:00
CONFIG_NET_RETRY_COUNT=10
Convert CONFIG_BOOTP_SEND_HOSTNAME to Kconfig This converts the following to Kconfig: CONFIG_BOOTP_SEND_HOSTNAME Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 14:00:14 +00:00
CONFIG_BOOTP_SEND_HOSTNAME=y
ARM: am3517-evm: Migrate to SPL_OF_CONTROL Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-24 16:57:25 +00:00
CONFIG_SPL_DM=y
ARM: am3517_evm: Enable TCA6416PW GPIO Expander With DM_I2C and DM_GPIO working, this patch can enable the GPIO expander on the I2C bus. This GPIO expander is connected to some of the DIP switches and can now read the status of these pins. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-09 14:21:21 +00:00
CONFIG_DM_PCA953X=y
mmc: move more driver config options to Kconfig Move (and rename) the following CONFIG options to Kconfig: CONFIG_DAVINCI_MMC (renamed to CONFIG_MMC_DAVINCI) CONFIG_OMAP_HSMMC (renamed to CONFIG_MMC_OMAP_HS) CONFIG_MXC_MMC (renamed to CONFIG_MMC_MXC) CONFIG_MXS_MMC (renamed to CONFIG_MMC_MXS) CONFIG_TEGRA_MMC (renamed to CONFIG_MMC_SDHCI_TEGRA) CONFIG_SUNXI_MMC (renamed to CONFIG_MMC_SUNXI) They are the same option names as used in Linux. This commit was created as follows: [1] Rename the options with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_DAVINCI_MMC/CONFIG_MMC_DAVINCI/g s/CONFIG_OMAP_HSMMC/CONFIG_MMC_OMAP_HS/g s/CONFIG_MXC_MMC/CONFIG_MMC_MXC/g s/CONFIG_MXS_MMC/CONFIG_MMC_MXS/g s/CONFIG_TEGRA_MMC/CONFIG_MMC_SDHCI_TEGRA/g s/CONFIG_SUNXI_MMC/CONFIG_MMC_SUNXI/g ' [2] Commit the changes [3] Create entries in driver/mmc/Kconfig. (copied from Linux) [4] Move the options with the following command tools/moveconfig.py -y -r HEAD \ MMC_DAVINCI MMC_OMAP_HS MMC_MXC MMC_MXS MMC_SDHCI_TEGRA MMC_SUNXI [5] Sort and align drivers/mmc/Makefile for readability Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-10 04:32:07 +00:00
CONFIG_MMC_OMAP_HS=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-12-04 22:18:38 +00:00
CONFIG_MTD=y
mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:03 +00:00
CONFIG_MTD_RAW_NAND=y
Convert CONFIG_NAND_OMAP_ECCSCHEME to Kconfig The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in include/linux/mtd/omap_gpmc.h for valid ECC schemes. Make which one we will use be a choice statement, enumerating the ones which we have implemented. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:39 +00:00
CONFIG_NAND_OMAP_ECCSCHEME_BCH8_CODE_HW_DETECTION_SW=y
Convert CONFIG_SPL_NAND_LOAD et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:29 +00:00
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
Convert CONFIG_SYS_NAND_PAGE_COUNT to Kconfig This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:30 +00:00
CONFIG_SYS_NAND_PAGE_COUNT=0x40
Convert CONFIG_SPL_NAND_LOAD et al to Kconfig This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-22 18:50:29 +00:00
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig This converts the following to Kconfig: CONFIG_NAND_MXC CONFIG_NAND_OMAP_GPMC CONFIG_NAND_OMAP_GPMC_PREFETCH CONFIG_NAND_OMAP_ELM CONFIG_SPL_NAND_AM33XX_BCH CONFIG_SPL_NAND_SIMPLE CONFIG_SYS_NAND_BUSWIDTH_16BIT Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues, add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-16 19:08:26 +00:00
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
configs: am3517-evm: Setup NAND booting The NAND offsets for the kernel and U-Boot were missing. This patch sets up the offsets so the AM3517-EVM can boot from NAND when DIP switches S7:1 and S7:4 are to the OFF position Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-21 23:12:12 +00:00
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to Kconfig This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-03 13:27:12 +00:00
CONFIG_DRIVER_TI_EMAC_USE_RMII=y
ARM: am3517_evm: Enable Pinctrl The simple pinctrl driver currently available works with the omap3. Enabling this will use the device tree to automatically set the pin-muxing for various drivers. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-09 12:25:30 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
ARM: am3517-evm: Enable DM_PMIC and DM_REGULATOR functions The PBIAS regulator is available on OMAP3's, and it's shared on the AM35, so this patch enables that in U-Boot along with GPIO based regulators. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-14 14:06:48 +00:00
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
# CONFIG_TWL4030_POWER is not set
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 17:51:26 +00:00
CONFIG_SPI=y
ARM: am3517_evm: Enable DM_SPI and DM_USB To comply with pending requirements, this sets the flags to enable DM_SPI and DM_USB. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-23 14:32:19 +00:00
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
configs: Re-sync CONFIG_USB_MUSB_HOST Now that CONFIG_USB_MUSB_HOST is part of Kconfig, migrate that over to the defconfig files. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 18:01:08 +00:00
CONFIG_USB=y
ARM: am3517_evm: Enable DM_SPI and DM_USB To comply with pending requirements, this sets the flags to enable DM_SPI and DM_USB. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-01-23 14:32:19 +00:00
CONFIG_USB_EHCI_HCD=y
configs: Re-sync CONFIG_USB_MUSB_HOST Now that CONFIG_USB_MUSB_HOST is part of Kconfig, migrate that over to the defconfig files. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 18:01:08 +00:00
CONFIG_USB_MUSB_HOST=y
Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY Signed-off-by: Adam Ford <aford173@gmail.com>
2017-12-29 14:16:05 +00:00
CONFIG_USB_MUSB_AM35X=y
Convert CONFIG_BCH to Kconfig This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-11 14:46:05 +00:00
CONFIG_BCH=y
ARM: am3517-evm: Migrate to SPL_OF_CONTROL Like the other Logic PD OMAP35/DM37 boards, this board has device tree enabled for U-Boot. This patch converts the board to enable SPL_OF_CONTROL and further shrinks the device tree in SPL to limit it to UART3 (console), MMC1, i2c1, and GPIO4 (for mmc1 CD and WP). There appears to be a bug in minicom so users may need to switch the minicom terminal emulation to ANSI from VT102 due to the junk that gets pushed out of the UART on startup. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-06-24 16:57:25 +00:00
CONFIG_SPL_TINY_MEMSET=y
configs: am3517_evm: Fix boot hang SPL is really tight on space, so decrease a little memory that we allocate in order to fix boot hang. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Derald D. Woods <woods.technical@gmail.com> Link: https://lore.kernel.org/r/20210626134258.601331-1-aford173@gmail.com
2021-06-26 13:42:58 +00:00
# CONFIG_EFI_LOADER is not set
Reference in a new issue Copy permalink